Users Manual

Antennas used in Tapco Model Radio 136377 902-928MHz 1Watt FHSS transmitter/receiver

Roman Marjamaa of Marjamaa Engineering Inc. on behalf of Traffic and Parking Control Co., Inc.

Original Certification Date: October, 5 2017

Class II Permissive Change Update: November 23, 2022 (version 2)

Tapco Model: Radio 136377

FCC ID: 2ANWN-02ANWN

Original Certification by:

Element Materials Technology

Element Minneapolis - Brooklyn Park

9349 W Broadway Ave.

Brooklyn Park, MN 55445 USA

Class II Permissive Change Update October 10, 2022 testing by:

F2 Labs Headquarters

26501 Ridge Rd.

Damascus, MD 20872

Radio Manufacture

Traffic and Parking Control Co., Inc. – Tapco

5100 W Brown Deer Road,

Brown Deer, WI 53223

Transmitter Details

1Watt FHSS Transceiver.

5 approved antennas

5 approved data rates

Four different antennas were evaluated for use on the Radio 136377 Transceiver.

1) 6dBi Omni - Fiberglass

a. Manufacturer Hanna Wireless

b. Model HW-OD9-5-NF

c. 50Ω, 824-960MHz

d. N-type to RPSMA will be used for unique antenna connector requirements.

e. The N-type to RPSMA adapter will have to be permanently attached by epoxy or Loctite or

similar, in order to meet the 15.203 requirement.

2) 3dBi Omni Whip antenna - RPSMA

a. Manufacturer Pulse Electronics

b. Model W1063

c. One-eighth wavelength dipole

d. 3dBi 50Ω, 868 – 928MHz

3) 3dBi Omni Low Profile ‘Puck’ shaped Antenna

a. Manufacturer Antenna Plus LLC

b. Model AP-90-S2-RP

c. Model used in testing was AP-90-S2-RP

i. 18inch coax with Reverse SMA connector

d. 3dBi 50 Ω, 890-950MHz

PAGE 1
Antennas used in Tapco Model Radio 136377 902-928MHz 1Watt FHSS transmitter/receiver Roman Marjamaa of Marjamaa Engineering Inc. on behalf of Traffic and Parking Control Co., Inc. Original Certification Date: October, 5 2017 Class II Permissive Change Update: November 23, 2022 (version 2) Tapco Model: Radio 136377 FCC ID: 2ANWN-02ANWN Original Certification by: Element Materials Technology Element Minneapolis - Brooklyn Park 9349 W Broadway Ave.
PAGE 2
4) 10.65dBi Yagi a. Manufacturer Laird PLC b. Model PC906N c. 50Ω, 896 – 940MHz 8.5dBd calculated to 10.65dBi d. N-type to RPSMA will be used for unique antenna connector requirements. e. The N-type to RPSMA adapter will have to be permanently attached by epoxy or Loctite or similar, in order to meet the 15.203 requirement. 5) 4dBi Omni Low Profile ‘Puck’ shaped Antenna a. Manufacturer World Products INC. b. Model WPANT30026-S5A c. Model used in testing was WPANT30026-S5A i.