35 in/88.
! SAFETY INFORMATION WARNING BE CAREFUL when opening more than one drawer. The item may become unstable and tip over causing personal injury and/or product damage. To prevent personal injury and/or property damage, distribute the weight in this item evenly. CAUTION APPLY caster brakes unless moving the item. CLOSE and LOCK the drawers before moving the box. Make sure the lock is in the UNLOCKED POSITION before closing.
PACKAGE CONTENTS D A E B F C PART A B C D E F DESCRIPTION QUANTITY Side Doors Drawer Slider Casters (Two Rigid & Two Swivel) Cam Lock With Round Keys Drawer Pulls Bumpers 3 2 12 4 1 6 4
OPERATING INSTRUCTIONS 1 1. Key number will have the letters HS followed by a two digit number. Locks will have a matching two digit number. 2 2. Identify the position of the notch in the center of the lock. The raised tip on the key must be inserted in the lock in this direction.
OPERATING INSTRUCTIONS 1 DRAWER REMOVAL Pull drawer out until fully extended. Step 1 Please push down release lever on right hand side. 2 Step 2 Pull up release lever on left hand side. Holding both levers, pull the drawer outward until the drawer releases from the drawer slide. DRAWER REPLACEMENT Extend the drawer slides from the tool chest.
CARE AND MAINTENANCE Clean using a mild liquid soap, rinse with clean water and dry thoroughly. Never use anything abrasive. thoroughly. Keeping the item covered will protect it from dust and moisture that could potentially damage the unit. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION After closing doors I’m having 1. Your inserting the key at the wrong notch. 2. Drawers must completely shut before key can be turned.