TRACKIMO UNIVERSAL TRACKER USER GUIDE July 2015
User Guide v7 Table of Contents 1. GETTING STARTED ...................................................................................................... 2 1.1. UNPACKING YOUR DEVICE .................................................................................................... 2 1.2. CHARGING YOUR DEVICE FOR THE FIRST TIME ....................................................................... 2 1.3. REGISTRATION ...............................................................
User Guide v7 1. Getting Started 1.1. Unpacking Your Device Carefully unpack your Trackimo device. Your packaging should include: • Battery • Locking Belt Clip • Adhesive Velcro • Adhesive Magnet • Water Resistant Sleeve • USB Cable • Screw Driver • Keychain and Lanyard A Quick Start Guide and a Safety & Warranty page are also included. • Use only approved accessories. • Accessories may vary by country or region. 1.2.
User Guide v7 1.3. Registration On your PC (not smartphone), using the latest version of your Internet Browser, visit www.trackimo.com and click on “Log In” and then “Sign Up”. Enter your email, choose a password, re-enter the password and click on the “Sign Up for Trackimo” button. You will receive a confirmation email to validate your email address. From this point on you can login through www.trackimo.com. IMPORTANT: You must locate this email and click the confirmation link.
User Guide v7 Initial Activation Screen Identify the “Device ID” of your Trackimo. This is a 7-digit number, located on the inside of your Trackimo under the battery, and printed on the package. Enter this number. After you enter the device ID, the system will check the connectivity of your Trackimo to GSM network. This may take a couple of minutes.
User Guide v7 If your Trackimo is not properly connected to the cellular network, you will see this: In case the device is not connected to GSM network, you will be asked to perform a few short steps and retry the connection. The system needs to verify that your device is actually in your possession. This is done by physically associating your device to your account. Follow the instructions and click on the SOS button to associate the device to your account.
User Guide v7 Your Trackimo device includes a prepaid 12-month monitoring subscription. You are not required to enter payment information at this time. Congratulations, your device was successfully activated! The only thing left to do is personalize your Trackimo device.
User Guide v7 Enter a nickname for your Trackimo device and (optionally) the phone number to receive alerts and notifications directly to your phone. Now you are ready to go. REMEMBER: The device has to be fully charged before the first activation. 1.6. Resetting Your Password In case you may have forgotten your password, you can click on the forgotten password link in the login dialog. An email will be sent to you to reset your password.
User Guide v7 1.7. Your Device Lights and Sounds To provide you with a richer visual and audio experience, the device will display lights and make sounds. The picture below shows where all the buttons and lights are located on the device and the table below shows what causes these lights and sounds to occur.
User Guide v7 2. Trackimo Dashboard 2.1. Dashboard Overview After logging in to the Trackimo website with your username and password, you will reach the Trackimo dashboard. The image below depicts the Trackimo dashboard with a short explanation in the table below about the key items within the dashboard. A Device Marker Icon This is the icon that is associated with a device. This will be the icon representing the device on the map. (You can change your icon in the setting menu.
User Guide v7 10 D Notification Menu Alerts the user to the number of unread device notifications, and upon clicking the menu shows all device notifications. E User Menu Upon clicking provides user specific options such as logging out or activating another device. F Device Location Information Provides location, battery information about the device. G Update Location Button Updates the device location.
User Guide v7 2.2. Device Location Information The device information can be found in two places: 1. When clicking on the device marker icon on the map, the location information will be available inside the information pop up right above the device marker icon. 2. When clicking on the device on the left sidebar of the dashboard the location information will be right below the device name.
User Guide v7 2.3. Update Device Location Upon clicking on the update location button (available for each device) Trackimo will attempt to contact the device through the cellular network and retrieve the device’s exact location. Trackimo will retrieve an exact GPS-based location, but if GPS is unavailable at the device location, Trackimo will attempt to approximate the location using the mobile network signals to the device.
User Guide v7 5 Minutes 30 Minutes The device will update its location every 5 minutes; this mode will cause the device to have a short battery life. The device will update its location every 30 minutes; this mode will cause the device to have a moderate battery life. 120 The device will update its location every 120 minutes; this Minutes mode will cause the device to have a long battery life.
User Guide v7 2.6. Device Alarms and Settings Clicking on the device alarms will open a settings menu on top of the screen. This will allow you to set the device’s specific settings and alarm notifications. Alarms are sent to your configured email and to the Trackimo dashboard. The notification alarms will include the device’s location and speed at the time the alarm is triggered. The following alarms are available: 14 Speed Limit A notification is sent when the speed limit is crossed.
User Guide v7 Left Key Pressed A notification is sent when the left key is pressed on the device. SOS Key Pressed A notification is sent when the SOS key is pressed on the device. The following settings are available: Device Beep Sound This turns the beeping options of the device on or off. When “off” the device will operate in “silent mode” and no beeps will be heard upon turning on, pressing the SOS and left/right button etc.
User Guide v7 2.7. Manage Subscription Renewals Clicking on the Manage Subscription link will open the following popup on top of the screen. This will allow you to see subscription information and perform actions such as “increase your monthly text alerts limit”.
User Guide v7 2.8. Geo Fences A GeoFence is a virtual fence (a rectangle around a certain location) that you can set using the Trackimo dashboard. When the device crosses the virtual fence, you will receive an email alarm message with information of when the device has crossed the virtual fence.
User Guide v7 To setup a GeoFence: 1. Click on the Fence button in the device menu. 2. Click on the "Create a new fence" button, this will open the new fence options below the button. 3. You will then have the option to search for an address for your fence and set a perimeter. A red rectangle will appear on the map representing your GeoFence. You can then move or resize your GeoFence directly on the map. 4. When done, give your fence a name in the new fence options and click on Save to save your GeoFence.