User's Guide

1
Activate the
TraceScan Device
A red LED will blink every 3
seconds when the device is
on
The device will turn on
when a user checks-in at
the sync station
2
Contact Tracing
The device registers the
user's contact history and
categorizes the risk based
on proximity and duration
Contact history is
automatically saved within
the device until the end of
the workday
6
Charging the
Device
The Wearables can be
charged through a USB port
(USB 2.0, USB 3.0
compatible)
*The battery will last for 5
days with a single charge
TraceScan Device
Power Off
5
a. The device will audibly
notify the user that the
device is turned off
b. A blue LED will blink every
3 seconds when the device is
in the sleep mode
After the data transfer is
complete the device will
turn off by itself
TraceScan User Guide
3
Social Distancing
Vibration can be turned off
by holding the marked area
of the screen for 5 seconds
The device will vibrate
when a user is in close
contact with another user
(-2m)
4
Transfering
contact history
A blue LED will be on
when the data is being
transferred
The device will transfer
the captured data to the
server when the user
checks-out at the sync
station