User Guide Pan/Tilt Home Security Wi-Fi Camera Tapo C200 1910012633 REV1.0.
Contents About This Guide····················································· 1 Introduction································································ 2 Appearance································································ 3 Set Up Your Camera··············································· 4 Use Your Camera····················································· 6 Authentication··························································· 9
About This Guide This guide provides a brief introduction to the Pan/Tilt Home Security Wi-Fi Camera and the Tapo Camera app, as well as regulatory information. Please note that features of the product may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Introduction When you are away from home, there are always people and things you will worry about. With the Pan/Tilt Home Security Wi-Fi Camera connected to your home network, you can get the full picture of any space in your apartment, dorm or home. Let the camera help you stay with them anytime, anywhere. Receive a notification if your little boy is working on the kitchen to make his lunch, or your fur baby is messing around inside kitchen.
Appearance The Pan/Tilt Home Security Wi-Fi Camera has a system LED that changes color according to its status, a lens, microphone, speaker, DC power port, RESET button and a Micro SD card slot. Refer below for details.
Set Up Your Camera Follow the steps below to get started with your new camera. Step 1. Download App Get the Tapo Camera app from the Apple App Store or Google Play, or by scanning the QR code below. Step 2. Log In Open the app, and log in with your TP-Link ID. If you don't have an account, create one first. Step 3. Start Setup Tap the button in the app and select C200.
Step 4. Configure Camera Follow app instructions to configure your camera and add it to your home network. Step 5. Place Camera Place your camera on a flat surface, or install it on a wall or ceiling with the provided mounting template and mounting screws. 1. Mark Position Place the mounting template where you want the camera. For wall mounting, drill two holes through two circles. 2. Mount Base Affix the camera base using the screws.
Use Your Camera After you successfully set up the camera, you will see your camera listed on the home page. You can view and manage your camera from anywhere at any time with the Tapo Camera app. Home Page This page lists all your cameras you've added and you can view them directly and manage them easily.
Change Camera Settings Change the settings of your camera to meet various needs, such as change your camera name, customize recording and detection schedules, turn on or off notifications, set activity zones, etc. Detection Settings View your camera detection settings and customize preferences for individual cameras. You can also tap to activate the Home or Away Mode with preset settings for when you're home or away.
Memory Photos and videos you take yourself will appear here. About Me You can edit your account, find the basic info related to the Tapo Camera app, or check the frequently asked questions and answers.
Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Tapo is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2019 TP-Link Technologies Co.
FCC compliance information statement Product Name: Pan/Tilt Home Security Wi-Fi Camera Model Number: Tapo C200 Component Name Model AC ADAPTER DC-005 FCC Identifier number NA Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC compliance information statement Product Name: AC ADAPTER Model Number: DC-005 Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2412MHz—2472MHz (20dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé.
限用物質含有情況標示聲明書 產品元件名稱 鉛 Pb 鎘 Cd 限用物質及其化學符號 汞 Hg 六價鉻 CrVI PCB ○ ○ ○ ○ 外殼 ○ ○ ○ ○ 電源供應器 — ○ ○ ○ 備考 1. " 超出 0.1 wt %" 及 " 超出 0.01 wt %" 系指限用物質之百分比含量超出百分比含量基準值。 備考 2. " ○ " 系指該項限用物質之百分比含量未超出百分比含量基準值。 備考 3. "—" 系指該項限用物質為排除項目。 多溴聯苯 PBB ○ ○ ○ 多溴二苯醚 PBDE ○ ○ ○ Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.