User's Guide

94
Chapter 14
Manage the Router
4. Click SAVE.
Devices on the internet can log in to
http://Router’s WAN IP address:port number (such
as
http://113.116.60.229:1024) to manage the router.
Tips:
• You can find the WAN IP address of the router on Network Map > Internet.
• The router’s WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log
in to the router through a domain name.
• Allow a specific device to manage the router remotely:
1. Tick the Enable checkbox of Remote Management.
2. Keep the HTTPS and HTTP port as default settings (recommended) or enter a value
between 1024 and 65535.
3. Select
Specified Device for Remote Managers.
4. In the
Only this IP Address field, enter the IP address of the remote device to manage
the router.
5. Click
SAVE.
Devices using this WAN IP can manage the router by logging in to
http://Router’s WAN
IP:port number
(such as http://113.116.60.229:1024).
Tips: The router’s WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want
to log in to the router through a domain name.
14. 7. System Log
When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
• To save the system log locally: