User Guide AC1200 Wireless VDSL/ADSL Modem Router Archer VR300 REV1.0.
Contents About This Guide 1 Chapter 1 Get to Know Your Modem Router 2 1. 1. 1. 2. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Physical Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 2. 1. Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 2. 2.
Chapter 9 Bandwidth Control 31 Chapter 10 Network Security 34 10. 1. 10. 2. 10. 3. 10. 4. 10. 5. Firewall & DoS Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Service Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 14 Administrate Your Network 73 14. 1. Set System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 14. 2. Update the Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 14. 2. 1. Online Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 14. 3. 14. 4. 14. 5. 14. 6. 14. 7. 14. 8. 14. 9. 14.
About This Guide This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them in typical scenarios. When using this guide, please notice that features of the router may vary slightly depending on the model and software version you have, and on your location, language, and internet service provider.
Chapter 1 Get to Know Your Modem Router This chapter introduces the modem router by detailing its main features and appearance.
Chapter 1 1 1 Get to Know Your Modem Router Product Overview TP-Link’s modem router is a combined wired/wireless network connection device with wireless router and DSL modem capabilities. With DSL and LAN/WAN ports, the modem router is compatible with DSL connections and fiber/cable access. Ethernet ports and adjustable antennas enable the modem router to provide wired and wireless access for multiple computers and mobile devices.
Chapter 1 Get to Know Your Modem Router LED Explanation Color Orange Blue Status Indication Flashing Slowly The system is starting up, or DSL synchronization is complete but there is no internet connection. Flashing Quickly DSL synchronization is in progress. On DSL synchronization failed, or there is no internet connection. Please refer to the Note below for troubleshooting. On Internet connection is available. Flashing Slowly The firmware is being upgraded.
Chapter 1 Get to Know Your Modem Router Item Description POWER Port For connecting the modem router to a power socket via the provided power adapter. ON/OFF Button The switch for the power. Press it to power on or off the modem router. RESET Button Press and hold down for about 2 seconds to reset the modem router into factory default settings. WPS Button Press to start a WPS synchronization.
Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Modem Router • Connect Your Modem Router
Chapter 2 2 1 Connect the Hardware Position Your Modem Router With the modem router, you can access your network from anywhere within the wireless network coverage. However, the wireless signal strength and coverage varies depending on the environment your modem router is in. Obstacles may limit the range of the wireless signal, for example, concrete structures, thick walls.
Chapter 2 Connect the Hardware Method 2: Wirelessly Use the default SSID (Wireless Network Name) and Wireless Password printed on the product label of the modem router to connect wirelessly. Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, most USB network cards, can be connected to your router through this method. (WPS is not supported by iOS devices.) Note: The WPS function cannot be configured if the wireless function of the router is disabled.
Chapter 3 Log In to Your Modem Router
Chapter 3 Log In to Your Modem Router With the web management page, it is easy to configure and manage the modem router. The web management page can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. Follow the steps below to log in to your modem router. 1 If the TCP/IP Protocol on your computer is set to the static (fixed) IP address, you need to change its settings to obtain an IP address automatically.
Chapter 4 Set Up Internet Connections This chapter introduces how to connect your modem router to the internet. The modem router is equipped with a web-based Quick Setup wizard. It has many ISP information built in, automates many of the steps and verifies that those steps have been successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provides IPv6 service.
Chapter 4 4 1 Set Up Internet Connections Use Quick Setup Wizard 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2 Click Quick Setup on the top of the page. Then follow the step-by-step instructions to connect your router to the internet. 3 To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS, etc.), log in with your TP-Link ID or click Register Now to get one.
Chapter 4 3 Set Up Internet Connections Click Save to make the settings effective, and you can refer to Test Internet Connectivity to test the internet connection. Tips: You can view and edit all internet connection settings on the Advanced > Network > Internet page. 4 3 Test Internet Connectivity After manually setting up the internet connection, you need to test the internet connectivity. The modem router provides a diagnostic tool to help you locate the source of any problems.
Chapter 4 3 Set Up Internet Connections Click Start to test the internet connectivity and you will see the test result in the gray box. 4 4 Set Up an IPv6 Connection If your ISP has provided a DSL line that supports IPv6 connection as well as some detailed IPv6 parameters, you can manually set up an IPv6 connection. If your ISP provides an IPv4-only connection or IPv6 tunnel service, permit IPv6 connection by referring to Set Up the IPv6 Tunnel.
Chapter 4 5 Set Up Internet Connections Scroll down the page, enable IPv6, and configure the IPv6 parameters. • Addressing Type: Consult your ISP for the addressing type (DHCPv6 or SLAAC). SLAAC is the most commonly used addressing type. • IPv6 Gateway: Keep the default setting as Current Connection. Note: If your ISP has provided the IPv6 address, click Advanced to reveal more settings. Check to use IPv6 specified by ISP and enter the parameters provided by your ISP.
Chapter 4 6 Set Up Internet Connections Click Save to make the settings effective. Tips: 1. You can view and edit all internet connections on Advanced > Network > Internet page. 2. In the Wireless Router Mode, you can also permit IPv6 connection by setting up an IPv6 connection or the IPv6 tunnel just as in the DSL Modem Router Mode. For details, refer to Set Up an IPv6 Connection and Set Up the IPv6 Tunnel.
Chapter 5 TP-Link Cloud Service TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your router with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app on your smartphone or tablet. To ensure that your router stays new and gets better over time, the TP-Link Cloud will notify you when an important firmware upgrade is available. Surely you can also manage multiple TP-Link Cloud devices with a single TP-Link ID.
Chapter 5 5 1 TP-Link Cloud Service Register a TP-Link ID If you have skipped the registration during the Quick Setup process, you can： 1. Visit http://tplinkmodem.net, and log in with the password you set for the router. 2. Go to Basic > TP-Link Cloud. 3. Click Register Now and follow the instructions to register a TP-Link ID. 4. After activating your TP-Link ID, come back to the TP-Link Cloud page to log in. The first-time login TP-Link ID will be bound automatically to your cloud router as an Admin.
Chapter 5 ¾ TP-Link Cloud Service Change your password 1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save. 5 3 Manage the User TP-Link IDs The first-time login TP-Link ID will be bound automatically to your router as an Admin account. An admin account can add or remove other TP-Link IDs to the same router as Users.
Chapter 5 TP-Link Cloud Service • Add/remove other TP-Link IDs to/from the router. 5 3 1 Add an TP-Link ID to Manage the Router 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID. 2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section. 3. Click , enter another TP-Link ID as needed and click Save. Note: If you need another TP-Link ID, please refer to Manage the Router via TP-Link Tether App to install the app and register a new one. 4.
Chapter 5 5 4 TP-Link Cloud Service Manage the Router via TP-Link Tether App The Tether app runs on iOS and Android devices like smartphones and tablets. 1. Open the Apple App Store or Google Play and search the key word TP-Link Tether or simply scan the QR code to download and install the app. OR 2. Connect your device to the router’s wireless network. 3. Launch the Tether app, select the model of your router and log in with your TP-Link ID or the password you set for the router. 4.
Chapter 6 IPTV IPTV is the abbreviation of Internet Protocol Television. The service can only be delivered through the Internet, and our modem router provides a specific LAN port for IPTV. By automatically separating IPTV from Internet surfing, you can enjoy a high quality of video streaming and fast browsing speeds at the same time.
Chapter 6 I want to: IPTV Configure the modem router to enable Internet Protocol Television (IPTV) Services. For example, I already bought IPTV service, but this service can only be delivered through the Internet. Therefore, I need to configure my modem router first. How can I do that? 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2 Go to Advanced > IPTV to open the configuration page. 3 Click Enable IPTV to enable this function.
Chapter 7 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can assign network authorities and bandwidth for guests to ensure network security, privacy, and fluency.
Chapter 7 7 1 Guest Network Create a Network for Guests 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2 Go to Advanced > Guest Network. Locate the Wireless Settings section. 3 Create 2.4GHz and 5GHz guest network according to your needs. 1 ) Enable 2.4GHz Wireless or 5GHz Wireless or enable both according to your needs. 2 ) Set an easy-to-identify SSID.
Chapter 7 2 Go to Advanced > Guest Network. 3 Assign network authorities and bandwidth according to your needs. • Guest Network Allow Guests to Access Each Other Select this check box to allow the clients in your guest network to access each other’s files. • Allow Guests to Access My Local Network Select this check box to allow the clients in your guest network to access your local network, not just the internet.
Chapter 8 Parental Controls This function allows you to block inappropriate, explicit and malicious websites and limit internet access during specified time periods.
Chapter 8 I want to: Parental Controls Control what types of websites my children or other home network users can visit and the time of day they are allowed to access the internet. For example, I want to allow my children’s devices (for example, a computer or a tablet) to access only www.tp-link.com and wikipedia.org from 18:00 (6PM) to 22:00 (10PM) on weekdays and not other time. How can I do that? 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router.
Chapter 8 Parental Controls 4 Click Scan, and add the device to be controlled. Or, enter the Device Name and MAC Address manually. 5 Click the icon to set the Effective Time. Drag the cursor over the appropriate cell(s) and click OK. 6 Enter a Description for the entry. 7 Select the check box to enable this entry and click OK. 8 Enable Content Restriction and select the restriction mode.
Chapter 8 Parental Controls 1 ) In Blacklist mode, the controlled devices cannot access any websites containing the specified keywords during the Effective Time period. 2 ) In Whitelist mode, the controlled devices can only access websites containing the specified keywords during the Effective Time period. 9 Click Add a New Keyword. You can add many keywords for both Blacklist and Whitelist. Below are some sample entries to allow access. 1 ) Enter a web address (for example, www.tp-link.
Chapter 9 Bandwidth Control This feature is used to fully utilize your limited bandwidth and optimize the load respectively. With this feature enabled, you can assign a specific minimum or maximum bandwidth for each computer, thus minimizing the impact caused by heavy load.
Chapter 9 I want to: Bandwidth Control Use an independent bandwidth and enjoy a good Internet experience without being affected by other users who are sharing the same router. For example, my roommate and I share 512Kbps upstream bandwidth and 4Mbps downstream bandwidth via this router, she likes to watch live show and play online games, which may take up much bandwidth. I don’t want to be affected, so we agree to equally distribute the bandwidth. The IP addresses of our computers are 192.168.1.
Chapter 9 Bandwidth Control 1 ) IP Range: Enter the IP address. The field can be single IP address or IP address range according to your demands. When you configure the single IP address, the computer with this IP address will get independent given bandwidth. When you configure the IP address range, all computers in the range will share the given bandwidth. 2 ) Port Range: Enable the port range. The default port range of TCP protocol or UDP protocol is from 1 to 65535.
Chapter 10 Network Security This chapter guides you on how to protect your home network from unauthorized users by implementing these network security functions. You can block or allow specific client devices to access your wireless network using MAC Filtering, or using Access Control for wired and wireless networks, or you can prevent ARP spoofing and ARP attacks by using IP & MAC Binding and you can protect your IPv6 network by preventing access from the internet using IPv6 Firewall.
Chapter 10 10 1 Network Security Firewall & DoS Protection The SPI (Stateful Packet Inspection) Firewall and DoS (Denial of Service) Protection protect the router from cyber attacks. The SPI Firewall can prevent cyber attacks and validate the traffic that is passing through the router based on the protocol. This function is enabled by default, and it’s recommended to keep the default settings.
Chapter 10 Network Security 2. The protection will be triggered immediately when the number of packets exceeds the preset threshold value, and the vicious host will be displayed in the Blocked DoS Host List. 10 2 Service Filtering With Service Filtering, you can prevent certain users from accessing the specified service, and even block internet access completely. 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router.
Chapter 10 Network Security 5 Select a Service Type from the drop-down list and the following four fields will be auto-populated. Select Custom when your desired service type is not listed, and enter the information manually. 6 Specify the IP address(es) that this filtering rule will apply to. 7 Click Save. Note: If you want to disable this entry, click the 10 3 icon.
Chapter 10 Network Security 3 Select the access mode to either block (recommended) or allow the device(s) in the list. To block specific device(s) 1 ) Select Blacklist and click Save. 2 ) Select the device(s) to be blocked in the Devices Online table. 3 ) Click Block above the Devices Online table. The selected devices will be added to Devices in Blacklist automatically. To allow specific device(s) 1 ) Select Whitelist and click Save. 2 ) Click Add.
Chapter 10 Network Security 3 ) Enter the Device Name and MAC Address. (You can copy and paste the information from Devices Online table if the device is connected to your network.) 4 ) Click OK. Done! 10 4 Now you can block or allow specific client devices to access your network (via wired or wireless) using the Blacklist or Whitelist. IP & MAC Binding IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind a network device’s IP address to its MAC address.
Chapter 10 Network Security 2 ) Click Bind to add to the Binding List. To bind the unconnected device 1 ) Click Add. 2 ) Enter the MAC address and IP address that you want to bind. 3 ) Select the check box to enable the entry and click OK. Done! 10 5 Enjoy the internet without worrying about ARP spoofing and ARP attacks. IPv6 Firewall IPv6 Firewall protects your IPv6 network by preventing access from the internet.
Chapter 10 Network Security 4 Select an interface name from the drop-down list. Interface names are names of the internet connections you have set up. 5 Click Scan to select a service from the list to automatically populate the Port field with an appropriate port number. It is recommended to keep the default Port if you are unsure about which one to use. If the service is not listed, manually enter the Service Type and the Port number (e.g., 21 or 21-25).
Chapter 11 NAT Forwarding Modem router’s NAT (Network Address Translation) feature makes the devices in the LAN use the same public IP address to communicate in the internet, which protects the local network by hiding IP addresses of the devices. However, it also brings about the problem that external host cannot initiatively communicate with the specified device in the local network.
Chapter 11 11 1 NAT Forwarding Translate Address and Port by ALG ALG (Application Layer Gateway) allows customized NAT (Network Address Translation) traversal filters to be plugged into the gateway to support address and port translation for certain application layer “control/data” protocols: FTP, TFTP, H323 etc. Enabling ALG is recommended. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. Go to Advanced > NAT Forwarding > ALG.
Chapter 11 NAT Forwarding • RTSP ALG: If enabled, it allows RTSP (Real-Time Stream Protocol) clients and servers to transfer data via NAT. 11 2 Share Local Resources over the Internet by Virtual Server When you build up a server in the local network and want to share it on the internet, Virtual Server can realize the service and provide it to the internet users. At the same time virtual server can keep the local network safe as other services are still invisible from the internet.
Chapter 11 NAT Forwarding 4 Click Scan, and choose HTTP. The external port, internal port and protocol will be automatically filled with contents. Enter the PC’s IP address 192.168.1.100 in the Internal IP field. 5 Click OK to save the settings. Tips: 1. It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about which port and protocol to use. 2. If the service you want to use is not in the Service Type, you can enter the corresponding parameters manually.
Chapter 11 NAT Forwarding address of the host. When the data from the internet returns to the external ports, the modem router can forward them to the corresponding host. Port triggering is mainly applied to online games, VoIPs and video players. Common applications include MSN Gaming Zone, Dialpad, Quick Time 4 players, and so on. Follow the steps below to configure the port triggering rules: 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router.
Chapter 11 NAT Forwarding all ports opened. When you are not clear about which ports to open in some special applications, like IP camera and database software, you can set the PC to be a DMZ host. Note: DMZ is most applicable when you don’t know which ports to open. When it is enabled, the DMZ host is totally exposed to the internet, which may bring some potential safety hazard. If DMZ is not in use, please disable it in time.
Chapter 11 NAT Forwarding seamless connection of the network. You may need to enable the UPnP if you want to use applications such as multiplayer gaming, peer-to-peer connections, real-time communication (for example, VoIP or telephone conference), or remote assistance. Tips: 1. UPnP is enabled by default in this modem router. 2. Only the application supporting UPnP protocol can use this feature. 3. UPnP feature needs the support of operating system (e.g. Windows Vista/ Windows 7/ Windows 8, etc.
Chapter 12 VPN Server The VPN (Virtual Private Networking) Server allows you to access your home network in a secured way through the internet when you are out of the house. IPSec (Internet Protocol Security) is a set of services and protocols defined by IETF (Internet Engineering Task Force) to provide high security for IP packets and prevent attacks. This chapter contains the following sections, please choose the appropriate VPN server connection type according to your needs.
Chapter 12 12 1 VPN Server Use IPSec VPN to Access Your Home Network IPSec VPN is used to create a VPN connection between local and remote networks. To use IPSec VPN, you should check that both local and remote routers support IPSec VPN feature. Then, follow the steps below to set up an IPSec VPN connection. 1. The typical VPN topology is here. Site A refers to local network, and Site B refers to the remote network that is to be connected.
Chapter 12 VPN Server 3 ) In the IPSec Connection Name column, specify a name. 4 ) In the Remote IPSec Gateway (URL) column, Enter Site B’s WAN IP address. 5 ) Configure Site A’s LAN. In the Tunnel access from local IP addresses column, we take Subnet Address as an example. Input the LAN IP range of Site A in the IP Address for VPN column, and input Subnet Mask of Site A. 6 ) Configure Site B’s LAN. In the Tunnel access from remote IP addresses column, we take Subnet Address as an example.
Chapter 12 VPN Server 8 ) Enter the Pre-Shared Key for IKE authentication. Then keep Perfect Forward Secrecy enabled. Note: Make sure Site A and Site B use the same key. 9 ) Leave the Advanced Settings as default value. Then click Save. Note: The Status column is Down after the configuration, and it will change to UP only when Site A and Site B are communicating via the VPN connection. 3. Configuration on Site B (remote network).
Chapter 12 VPN Server Note: 1. The product supports a maximum of ten simultaneous connections. 2. If one of the site has been offline for a while, for example, if Site A has been disconnected, on Site B you need to click Disable and then click Enable after Site A back on line in order to re-establish the IPSec tunnel.
Chapter 13 Specify Your Network Settings This chapter introduces how to change the default settings or adjust the basic configuration of the modem router using the web management page.
Chapter 13 Specify Your Network Settings 13 1 LAN Settings 13 1 1 Change the LAN IP Address The modem router is preset with a default LAN IP 192.168.1.1, which you can use to log in to its web management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. If the IP address conflicts with another device in your local network or your network requires a specific IP subnet, you can change it. Follow the steps below to change your IP address.
Chapter 13 13 1 2 Specify Your Network Settings Use the Modem Router as a DHCP Server You can configure the modem router to act as a DHCP server to assign IP addresses to its clients. To use the DHCP server function of the modem router, you must configure all computers on the LAN to obtain an IP Address automatically. Follow the steps below to configure DHCP server. 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router.
Chapter 13 13 1 3 Specify Your Network Settings Reserve LAN IP Addresses You can view and add a reserved address for a client. When you specify an IP address for a device on the LAN, that device will always receive the same IP address each time when it accesses the DHCP server. If there are some devices in the LAN that require permanent IP addresses, please configure Address Reservation on the router for the purpose. Follow the steps below to reserve an IP address for your device.
Chapter 13 13 2 1 Specify Your Network Settings Configure the RADVD Address Type 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2 Go to Advanced > Network > LAN Settings. 3 Select IPv6 to configure IPv6 LAN parameters. Note: If you have created an interface group, you can configure IPv6 LAN settings for the default interface group only. 1 ) Select the RADVD address type to make the modem router assign IPv6 address prefixes to hosts.
Chapter 13 Specify Your Network Settings 1 ) Select the DHCPv6 Server address type to make the modem router assign IPv6 addresses to hosts. 2 ) Specify the Start/End IPv6 Address for the IPv6 suffixes. The modem router will generate IPv6 addresses within the specified range. 3 ) Keep Leased Time as the default value. 4 ) Keep Site Prefix Type as the default value Delegated. If your ISP has provided a specific IPv6 site prefix, select Static and enter the prefix.
Chapter 13 ¾ Specify Your Network Settings To enable or disable the wireless function: Enable the 2.4 GHz or 5GHz Wireless Network. If you don’t want to use the wireless function, just deselect the box. If you disable the wireless function, all the wireless settings won’t be effective. ¾ To change the wireless network name (SSID) and wireless password: Enter a new SSID using up to 32 characters. The value is case-sensitive.
Chapter 13 Specify Your Network Settings • 802.11a/n/ac mixed (5GHz): Select if you are using a mix of 802.11a, 802.11n and 802.11ac wireless clients. It is strongly recommended that you select 11a/n/ac mixed. Channel: Select the channel you want to use from the drop-down list. This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.
Chapter 13 Specify Your Network Settings 3 Click Start WPS on the page. 4 Press the WPS button of the client device directly. 5 The router’s LED flashes quickly for about 2 minutes during the WPS process. 6 When the LED is on, the client device has successfully connected to the modem router. Method 3: Enter the modem router’s PIN on your client device Use this method if your client device asks for the modem router’s PIN. 1 Visit http://tplinkmodem.
Chapter 13 Specify Your Network Settings 2 Go to Advanced > Wireless > WPS page. Click Method Two--PIN. 3 Select Client’s PIN. 4 Enter the client device’s PIN in the field. Then click the Connect button. 5 Connect successfully will appear on the above screen, which means the client device has successfully connected to the modem router. 13 3 3 Schedule Your Wireless Function You can automatically turn off your wireless network (both 2.4GHz and 5GHz) when you do not need the wireless connection.
Chapter 13 Specify Your Network Settings Note: 1. Make sure that the time of the router is correct before using this function. For details, refer to Set System Time. 2. The wireless network will be automatically turned on after the time period you set. 13 3 4 View Wireless Information ¾ To view the detailed wireless network settings: 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2 Go to Advanced > Status page. You can see the Wireless box.
Chapter 13 2 Specify Your Network Settings Go to Advanced > Wireless > Advanced Settings page. • Beacon Interval: Enter a value between 25 and 1000 in milliseconds to determine the duration between which beacon packets are broadcasted by the router to synchronize the wireless network. The default is 100 milliseconds. • RTS Threshold: Enter a value between 1 and 2346 to determine the packet size of data transmission through the router. By default, the RTS (Request to Send) Threshold size is 2346.
Chapter 13 Specify Your Network Settings • Short GI: This feature is enabled by default and recommended to increase the data capacity by reducing the Guard Interval (GI) time. • AP Isolation: Select this check box to enable the AP Isolation feature that allows you to confine and restrict all wireless devices on your network from interacting with each other, but still able to access the internet. AP isolation is disabled by default.
Chapter 13 6 Specify Your Network Settings Click Log in and Save. Tips: If you want to use a new DDNS account, please Logout first, then login with the new account. 13 5 Interface Grouping I want to: Divide my devices connected to the modem router into different groups and disallow devices’ cross-group communication. For example, in my house, devices connected to LAN1 and LAN3 are for work, while others for entertainment.
Chapter 13 Specify Your Network Settings 3 Name the group. 4 Check the boxes of LAN1 and LAN3 in Available LAN. Here Wi-Fi 2.4G network and Wi-Fi 5G network are viewed as a LAN interface respectively. 5 Click Enable Group Isolation to isolate working devices and disallow other devices from communicating with them. 6 Click OK to save the settings. Done! Now your working devices connected to LAN1 and LAN3 are in an isolated group! Note: VLAN function is enabled by default.
Chapter 13 Specify Your Network Settings static routing. Modem router Company’s server Router 2 WAN: 172.30.30.100 LAN: 192.168.1.1 LAN: 192.168.1.2 172.30.30.1 Switch My PC 192.168.1.100 How can I do that? 1 Make sure the routers use different LAN IP addresses on the same subnet. Disable Router 2’s DHCP function. 2 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 3 Go to Advanced > Network > Static Routing.
Chapter 13 Specify Your Network Settings • Network Destination: The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of the router. In the example, the IP address of the company network is the destination IP address, so here enters 172.30.30.1. • Subnet Mask: Determines the destination network with the destination IP address. If the destination is a single IP address, enter 255.255.255.
Chapter 13 13 7 Specify Your Network Settings Set Up the IPv6 Tunnel The IPv6 Tunnel feature helps you obtain IPv6 resources based on an IPv4 WAN connection or vice versa. IPv6 Tunnel is a transition mechanism that allows isolated IPv6 hosts and networks to reach each other over IPv4-only infrastructure before IPv6 completely supplants IPv4. It is a temporary solution for networks that do not support native dual-stack, where both IPv6 and IPv4 run independently.
Chapter 13 13 7 2 Specify Your Network Settings Specify the 6rd Tunnel with Parameters Provided by Your ISP I want to: Specify the 6rd tunnel with the parameters provided by my 6rd tunnel service provider. How can I do that? 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2 Go to Advanced > Network > IPv6 Tunnel. 3 Tick the check box, select 6rd as the tunneling mechanism and select a WAN connection from the drop-down list.
Chapter 14 Administrate Your Network This chapter introduces how to change the system settings and administrate your modem router’s network.
Chapter 14 14 1 Administrate Your Network Set System Time System time is the time displayed while the modem router is running. The system time you configure here will be used for other time-based functions like Parental Controls and Wireless Schedule. You can manually set how to get the system time. Follow the steps below to set your system time. 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router.
Chapter 14 14 2 Administrate Your Network Update the Firmware TP-Link is dedicated to improving product features, giving you a better network experience. We will inform you through the web management page if there’s any update firmware available for your router. The latest firmware can also be downloaded from the Support page of our website www.tp-link.com for free. Note: 1. Make sure that you have a stable connection between the router and your computer.
Chapter 14 Administrate Your Network 3. Wait a few moments for the upgrading and rebooting. 14 2 2 Local Upgrade 1. Download the latest firmware file for the router from our website www.tp-link.com. 2. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > System Tools > Firmware Upgrade. 4. Focus on the Device Information section. Make sure the downloaded firmware file matches with the Hardware Version. 5.
Chapter 14 Administrate Your Network ¾ To restore configuration settings 1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2 Click Advanced > System Tools > Backup & Restore page. 3 Click Browse to locate the previous backup configuration file, and click Restore. 4 Wait for the restoring and then the modem router will automatically reboot. ¾ To reset the modem router to factory default settings 1 Visit http://tplinkmodem.
Chapter 14 Administrate Your Network 3 Enter the old password. Enter the new password and enter again to confirm. 4 Click Save to make the settings effective. 14 5 Local Management You can control the local devices’ authority to manage the modem router via Local Management feature. By default all local connected devices are allowed to manage the modem router. You can also specify one device to manage the modem router and enable local management over a more secure way, HTTPS.
Chapter 14 Administrate Your Network Now, you can manage the modem router over both HTTP (http://tplinkmodem.net) and HTTPS (https://tplinkmodem.net). Note: If you want that all local devices can manage the modem router, just leave the IP/MAC Address field blank. 14 6 Remote Management By default, the remote devices are not allowed to manage the modem router from the internet. You can enable remote management over HTTP and/or HTTPS if needed. HTTPS is a more secure way to access the router.
Chapter 14 Administrate Your Network All devices or the specific device on the internet can log in to your router using the address displayed on the Manage This Router via the Address field to manage the modem router. Tips: 1. If you were warned about the certificate when visiting the web management page remotely, click Trust (or a similar option) to continue.
Chapter 14 Administrate Your Network You can choose to save the system logs to your local computer or a remote server. Click Save Log to save the logs in a txt file to your computer. Click Log Settings to set the storage path of logs. • Save Locally: Select this option to cache the system log to the router’s local memory, select the minimum level of system log to be saved from the drop-down list. The logs will be shown in the table in descending order on the System Log page.
Chapter 14 Administrate Your Network • CWMP: Toggle On to enable the CWMP (CPE WAN Management Protocol) feature. • Inform: Enable this feature to send an Inform message to the ACS (Auto Configuration Server) periodically. • Inform Interval: Enter the time interval in seconds when the Inform message will be sent to the ACS. • ACS URL: Enter the web address of the ACS which is provided by your ISP. • ACS Username/Password: Enter the username/password to log in to the ACS server.
Chapter 14 Administrate Your Network • Get RPC methods: Click to get the methods to support CWMP. Click Save to make the settings effective. 14 9 SNMP Settings SNMP (Simple Network Management Protocol) is widely applied in the computer networks of today, and is used for ensuring the transmission of the management information between two nodes. In this way, network administrators can easily search and modify the information on any node on the network.
Chapter 14 Administrate Your Network • SNMP Agent for WAN: Toggle On to allow management from the WAN side using SNMP. • Read-only Community: Displays the default public community string that protects the router from unauthorized access. • Write Community: Displays the default write community string that protects the router from unauthorized changes. • System Name: Displays the administratively-assigned name for this managed device.
Appendix: Troubleshooting T1 How do I restore my modem router’s configuration to its factory default settings? With the modem router powered on, press and hold the RESET button on the modem router for approximately 2 seconds until the LED flashes quickly, then release the button. Note: Once the modem router is reset, the current configuration settings will be lost and you will need to re-configure the modem router.
4 ) Click LAN settings, deselect the following three options and click OK; 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings.
• Change a web browser or computer and log in again. • Reset the modem router to factory default settings. Refer to Back up and Restore Configuration Settings for detailed information. Open a web browser and log in again. If login fails, please contact our Technical Support. T4 What should I do if I cannot access the internet? 1 Ensure all connections are secure, including telephone lines, Ethernet cables and power adapters.
6 Please contact our Technical Support if the problem persists. T5 How do I clone a MAC address? You can manually change the MAC address of the modem router. It is helpful when your internet access account provided by your ISP is bound to one specific MAC address, in other words, your ISP just permits only one computer with the authenticated MAC address to access the internet. In this case, you can use MAC Clone to allow more computers to access the internet via the same account.
6 ) Click OK. • For Windows 7/8/8.1/10: 1 ) Right-click the Network icon on the system tray and select Open Network and Sharing Center > Change adapter settings. 2 ) Right-click your network connection (wired or wireless) and select Properties. 3 ) Double-click Internet Protocol Version 4 (TCP/IPv4). 4 ) Select both Obtain an IP address automatically and Obtain DNS server address automatically, then click OK. 5 ) Click OK again to save your configuration.
¾ If you can find your wireless network but fail to connect, follow the steps below: 1 Authentication problem: Network Security Key Mismatch. 1 ) Sometimes you will be asked to type in a PIN number when you connect to the wireless network for the first time. This PIN number is different from the Wireless Password/Network Security Key, usually you can only find it on the label of your modem router.
4 ) Connect to wireless network. 2 Windows was unable to connect to XXXX /Cannot join this network/Taking longer than usual to connect to this network. 1 ) Check the wireless signal strength of your network, if it is weak (1~3 bars), please move the router closer and try again; 2 ) Change the wireless Channel of the router to 1,6,or 11 to reduce interference from other networks; 3 ) Re-install or update the driver for your wireless adapter of the computer; 4 ) Connect to wireless network.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2017 TP-Link Technologies Co., Ltd.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2412MHz—2472MHz (20dBm) 5180MHz—5240MHz (23dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
