Installation Manual

For Mac OS X
AC1300 High Gain Wireless
MU-MIMO USB Adapter
MODEL NO. Archer T4U
Quick Installation Guide
1 Connect to a Computer
Insert the adapter into a USB port on your
computer directly.
a. Download the driver and utility from this
product’s Support page at
www.tp-link.com.
Note:
If your computer has a CD drive, you can also run the
included CD to install the driver and utility.
b. Unzip the downloaded folder and run the
Install.pkg.
c. Follow the instructions to complete the
installation.
Uninstall.commandInstall.pkg
SHELL
Option 1: Via TP-Link Utility Option 2: Via Wi-Fi Protected Setup (WPS)
a. Click (TP-Link Utility) on the menu
bar.
b. Select your Wi-Fi network and enter the
Wi-Fi password when prompted.
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS
button on the adapter until the WPS
progress window appears.
c. When the "WPS Protocol Finished!!"
message appears, click OK.
2 Install Driver and Utility 3 Join a Wireless Network
Fri 5:14 PM
TP-Link_0903
TP-Link_
0210
TP-Link_0001_5G
TP-Link_XXXX
Join Other Network...
WPS...
Open Wireless Utility...
USB-WiFi: On
Turn USB-WiFi Off
WPS Progress： Scan Active WPS AP
PIN PBC Cancel
WPS