Quick Installation Guide

ManualsBrandsTP Link ManualsElectricalArcher D2 AC750 Wireless Dual-Band Gigabit ADSL 2+ Modem Router

Quick

Installation Guide

Wired

Open a web browser on the computer and configure the modem router according to the following main clues.

Connect your computer to the modem router (Wired or Wireless).

Via Web BrowserMethod 1

2. Configuring the Modem Router

1. Connecting the Hardware

Wireless

AC750 Wireless Dual Band Gigabit

ADSL2+ Modem Router

Note: If you don’t need the phone service, just directly connect the ADSL port to the Phone Jack with a phone cable.

Note: Please wait 1-2 minutes until the ADSL LED is on.

Ethernet cable

Connect wirelessly by using

the default network name

(SSID) and password on the

product label printed on the

bottom of the modem

router.

Enter http://tplinkmodem.net or 192.168.1.1 in

the address bar. Type in admin for both the user

name and password and click Login.

Click Save and wait a moment for your settings taking

effect. Click Finish to complete the setup.

a C

Choose Quick Setup in the main menu and then click

Next to start the configuration. In the next screen, select

your Region and Time Zone from the drop-down list, and

then click Next.

Click Next to continue.

Wireless Network Name:

Password:

TP-LINK_XXGHz_XXXXXX

XXXXXXXX

2.4GHz & 5GHz Wireless Network Name and Password

Back Next

Channel:

Mode:

Security:

Note: You may rename your 2.4GHz/5GHz wireless network name and create

your own password.

Finish

Quick Setup-Complete

Operation Mode Configuring: Success

WAN Connection Configuring: Success

Gateway and DNS Configuring: Success

Wireless Configuring: Success

Time Zone Configuring: Success

Region

Back

Quick Setup-Region and Time Zone

XXXXXX

XXXXXXXXXX

Time Zone

Enjoy!

Now your wired and wireless

devices can connect to the

Internet !

Note: If you have changed your

2.4GHz/5GHz wireless network

name and password, you must sign

in with the new names/passwords

to regain access to the Internet.

Connect the splitter and power adapter as follows. Then press the POWER ON/OFF button.

Check the following LED lights to ensure

the hardware connection is correct.

Power

ADSL

Splitter

Phone Jack

Model:Archer D2 ver:1.0

S/No.:XXXXXXXXXXXXX

MAC:XXXXXXXXXXXX

Wireless Password /PIN

7106505141 REV1.0.1

Select Yes to auto detect your connection type and then click

Next to continue.

Back

Quick Setup-Auto Detection

Yes.

No. I want to configure the Internet connection myself.

Auto-Detect Connection Type:

Enter the parameters provided by your ISP and then

click Next. Here we take PPPoE as an example.

Back

XXXXXX

Quick Setup-PPPoE

DSL PVC:

Auto-detection has succeeded!

8/35

Encapsulation Mode:

LLC

Connection Type:

PPPoE

Username:

Password:

Confirm Password:

Note: If the login window does not appear, please refer to

FAQ->Q1.

http://tplinkmodem.net

admin

Summary of content (2 pages)

PAGE 1
Quick Installation Guide AC750 Wireless Dual Band Gigabit ADSL2+ Modem Router 7106505141 1. Connecting the Hardware 1 2 Connect the splitter and power adapter as follows. Then press the POWER ON/OFF button. Check the following LED lights to ensure the hardware connection is correct. Phone Jack Splitter ADSL Power On On Note: Please wait 1-2 minutes until the ADSL LED is on. Note: If you don’t need the phone service, just directly connect the ADSL port to the Phone Jack with a phone cable. 2.
PAGE 2
Method 2 Via CD Setup Wizard Note: If you are using a computer that cannot run the mini CD, please refer to Method 1 for configuration. 1 Insert the TP-LINK Resource CD into the CD-ROM drive. 2 3 Choose your language and select Archer D2. Then click Start Setup. Follow the pop-up flash video to connect your devices. 4 Click FINISH to complete the setup. Please check the following LEDs. Then click NEXT and follow the step-by-step instructions.