Referenced Qualified Design ID(s): 53438
General Product Use for Spectacular Light & Sound Show App instruction Devices Required: Devices required and included: Base Controller with Music Card Slot and Bluetooth speaker w/ Ground Stake and Hanging Hook 3 Satellite Receivers w/ Hanging Hook This product requires use of smart phone, tablet, or other BT enabled devices. APP can be downloaded to your smart phone.
1. Lights On/Off Button: Press this button to turn on/off your lighting strings. 2. Function Selector: The function selector allows you to scroll through and select the desired function. ▪ Combination ▪ Flash 1 Directional ▪ Flash 2 Directional ▪ Random Fade ▪ Stacking Flash ▪ Flash & Chase ▪ Random Flashing 3. Brightness Selector Buttons: These two buttons allow you to adjust the brightness of the lights that are plugged into the speaker. Push either the top button (increase) or bottom button (decrease).
6. Play/Pause Button: Press this button to play/pause the music. 7. Previous/Next Button: Press the “Previous” button to play the previous song; press the “Next” button to play the next song. 8. Order/Single Repeat Button: Press the Order button to play the songs in the playlist sequentially. The default setting for this button is On. Press the button, will change into Single Song Repeat model.
(3) Make sure all plug-in connections to power sources are tight and secure. If you are using a power cord, be sure they are in safe working condition with no cuts, frays or damage to plugs and receptacles. C. Operating the Base Controller 4.“ ”: Previous/Volume down Button Short press “ ” button will select previous music and long press “ button will decrease music volume 5.“ ” ”: MODE button Press “ ” button will switch between Bluetooth and SD modes.
With SD card pre-inserted - When plugged in the Base Controller, the Controller will be turned on and speaker is set into BT mode as default, the indicator is steady and blue. Now the speaker is standby and ready for pairing. - Press “Mode” button, the speaker will start to play music stored in SD card and indicator is flashing in Red.
APP INSTRUCTION NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Note: “Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment." The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with Industry Canada Licence-exempt RSS standard(S).