Index General Information for WiFi Functionsꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 2 Definitionsꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ4 Factory Default Settingsꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 Important Notes ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 5 Change Master Codeꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 6 Add Credentialsꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 6 Add a User Code Add Multiple User Co
GENERAL LOCK INFORMATION FOR THE WiFi FUNCTION The 5000-RF Series lock is a versatile lock- it can be operated by a 6-10 digit PIN code, RFID card/FOB or through your smart phone APP via WiFi. The APP is called TSE Home- it is available for Android and IOS. The lock is operable without the APP (can use PIN codes and RFID credentials), the APP provides access to the WiFi features. The lock and APP require a Gateway to be used to interface between the lock-router-cloud-smartphone.
Smartphone they must be on the same WiFi connection. You will need your WiFi password. The APP is not compatible with 5G networks. Click on the upper left corner of the APP to access the menu. Click on “Gateway Management”> “Add Gateway Box”> “Smart Gateway”> “Wi-Fi Box”. Your Gateway is plugged in and the LED should be flashing- if flashing click “Next Step” on the APPenter WiFi password> “Next Step”- APP will pair with the Gateway.
Definitions Credential: The lock requires a valid credential to operate. A credential can be a 6-10 digit Master Code, User Code, or Keycard/Fob. LED Indicator: The LED indicators are located around the keypad of the lock. Lock flashes green LED and/or red LED dependent on inputs. While unlocking, a red LED followed by a green LED means the lock is not programmed and can be unlocked with any 6-10 digit code or Keycard/Fobs.
Important Notes To wake up the touch keypad, gently swipe or tap the keypad. While in Factory Default Settings any credential will open the lock until a Master Code is programmed into the lock. When any credential is presented the lock will flash red, then green, and unlock. The Factory Default Setting’s Master Code must be changed before programming any other codes or system settings. A Master Code or User Code can be 6-10 digits (they do not need to be the same code length).
Change Master Code Key Sequence For example, to change Master Code to “555555”, press: Notes Factory Default Setting’s Master Code is 123456. It must be changed with the user’s own Master Code immediately. Manufacturer assumes no liability, direct or indirect, due to failure to change Master Code. No other programming will be accepted until Factory Default Setting’s Master Code has been changed. Master Code can be changed at any time.
For example, to add User Code of “202020”, press: Add Multiple User Codes Key Sequence 1st User Code Key Sequence Additional User Codes Key Sequence: For example, to add User Codes “202020”, “303030”, and “404040”, press: Notes The input of additional credentials must start before lock goes into Idle Mode (12 seconds). If the lock goes into Idle Mode, start the key sequence from the beginning. Same User Code cannot be added twice.
Notes Keycards/Fobs can be added interchangeably with User Codes. Multiple Keycards/Fobs can be added during the same programming sequence (like Additional User Codes Key Sequence). Same Keycard/Fob cannot be programmed twice. To exit, press asterisk (✴) or wait until the lock goes into Idle Mode (12 seconds).
Reset Lock to Factory Default Settings Key Sequence Notes All credentials will be deleted, and the lock will reset to Factory Default Settings. System Settings Passage Mode Key Sequence Notes After creating a Passage Code or keycard, presenting it will activate the Passage Mode function. The lock will remain actively unlocked until the Passage Code or keycard or Master Code is entered to disable the function. Passage Mode and Dual Verification Mode cannot be programmed simultaneously.
The Factory Default Setting is set to one credential. Dual Verification Mode and Passage Mode cannot be programmed simultaneously. Adjust Keypad Sound Key Sequence Notes Disabling the sound only affects general operation, not during programming of the lock. During programming mode, lock will temporarily re-enable sound. Reset Lock to Factory Default Settings without a Master Code Steps Result 1. Unscrew the back cover. 2. Locate the reset button on the battery holder. 3.
Low Battery Warning When the battery voltage is low, unlocking the lock will display a green LED with an alarm followed by a red LED, then followed by a yellow LED with an alarm to indicate low power. Batteries should be changed as soon as this happens. When locking under low battery voltage condition, the lock will only use the warning sound to indicate low power. Only 200 operations are allowed under low battery condition - must change batteries to ensure lock operates properly.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.