Wiring Diagram

ManualsBrandsTowin Optoelectronics ManualsElectronicsMicrowave Sensor

Microwave Sensor

TOWIN Optoelectronic Co., Ltd

Website：http://www.towin-driver.com/

E-mail: cathy@towin-driver.com；sales@towin-driver.com

Address: Liuxing Rd 1 Liujia Industry Hengli Town, Dongguan, Guangdong 523473 CHINA

Product Features:

■ Wide range of working voltage（100~277VAC）

■ Maximum load power 1200W

■ IP65

■ Apply to outdoor fixtures

■ Built-in sunlight Sensor

■ Built-in dimming function to easily adjust the luminance of fixtures

■ The function can be set by IR remote controller

■ Wide detection range and 10M maximum installation height

Coverage area：

■ 5 years warranty

Wall mount

Application：

Indoor and outdoor lighting fixtures, lighting fixture system,

Electrical control box

Top view

Certificate：

Vertical view

UL E503809 @UL773A

CE-RED (LVD @EN60950-1; EMC; RF; HEALTH)

Specifications:

Input voltage 100-277Vac 50/60Hz

Ceiling mount

Rated load

120VAC 50/60Hz 5A LED Driver

277VAC 50/60Hz 3A LED Driver

120VAC 50/60Hz 800W Standard Ballast / Tungsten

277VAC 50/60Hz 1200W Standard Ballast /

Tungsten

Top view

Height:10m

Detection area

Max 10M installation heights. Max 16M coverage

areas

Hold time 5s / 2min / 5min

Sensor principle Microwave motion detector

Microwave frequency 5.8G±75MHz,ISM wave band

Vertical view

Turn on brightness (Reference value)30-60Lux

Turn off brightness 100-150Lux (Reference value)

Detection angle 150°(wall installation),360°(Ceiling installation)

Motion detection 0.5~3m/s

Operating temperature -35℃~60℃

Wiring diagram：

IP RATING IP65

Dimension Install：

Mounting thread：

1/2“-14T NPS H=44.5mm W=40.4mm L=110mm

Model: MSB

Summary of content (5 pages)

PAGE 1
® Microwave Sensor Product Features: ■ Wide range of working voltage（100~277VAC） ■ Maximum load power 1200W ■ IP65 ■ Apply to outdoor fixtures ■ Built-in sunlight Sensor ■ Built-in dimming function to easily adjust the luminance of fixtures Model: MSB ■ The function can be set by IR remote controller ■ Wide detection range and 10M maximum installation height Coverage area： ■ 5 years warranty Wall mount Application： Indoor and outdoor lighting fixtures, lighting fixture system, Electrical control box
PAGE 2
® Microwave Sensor Function description of remote control: Hibernation - the sensor stops working and goes into hibernation. Press any other key to re-enter the working state.
PAGE 3
® Microwave Sensor Time Bucket mode 1: The luminance of the light changes with the time bucket. The internal timer starts timing or reset with the ambient luminance under working conditions. The luminance is 70% in 0.5H, 0.5H-3.5H is 100%, 3.5H-4.5H is 70%, 4.5H-5.5H is 50%.Then turn off the light when the luminance is 20% until the environment is bright. Time Bucket mode 2: The luminance of the light changes with the time bucket.
PAGE 4
® Microwave Sensor Microwave Sensor Model : MSB 4/4 TOWIN Optoelectronic Co., Ltd Website：http://www.towin-driver.com/ E-mail: cathy@towin-driver.com；sales@towin-driver.
PAGE 5
® Microwave Sensor FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.