User's Manual

ManualsBrandsTOUCAN ManualsCamera & PhotoVideo Conference System 360, Conference Camera 360

Bluetooth

SC360

• Tap [ ] while calling to mute or unmute the microphone.

Mute/Unmute

SC360

• Remove the camera cover from SC360

conference speaker.

• Plug the included power adapter into a

power outlet and connect the other end

to SC360.

• Press and hold [ ] on the top of the

speaker for 2 seconds to turn SC360 on

and 3 seconds to turn it oﬀ.

Turn on the SC360

Getting Started

Connected

VIDEO

CONFERENCE

SYSTEM 360

What’s in the Box

FCC Statement

Warning: Changes or modiﬁcations to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment oﬀ and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀerent from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including Interference that

may cause undesired operation.

ISED Regulatory Compliance

This device contains license-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause

undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est

conforme aux CNR d’Innovation, Sciences et Développement économique Canada

applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux

deux conditions suivantes :

1. L’appareil ne doit pas produire de brouillage;

2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le fonctionnement.

RF Exposure Compliance

This equipment complies with FCC/IC radiation exposure limits set forth for an

uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm

between the radiator and your body.

Cet équipement est conforme aux limites d’exposition aux radiations FCC/IC établies

pour un environnement non contrôlé.

Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre

le radiateur et votre corps.

The Toucan logo and Toucan are trademarks or registered trademarks of VuPoint Solutions

Inc. in the United States and other countries. The Bluetooth® word mark and logos are

registered trademarks owned by Bluetooth SIG, Inc. Product names, logos, brands and other

trademarks referred to herein are the property of their respective trademark holders. All

trademarks remain the property of their respective holders, and are used only to describe the

products or services being provided. These trademark holders are not aﬃliated with VuPoint

Solutions, Inc. They do not sponsor or endorse VuPoint Solutions, Inc’s products or services.

VuPoint Solutions, Inc. (USA):

710 Nogales Street, City of Industry, CA 91748

VuPoint (Europe) Company Limited:

1 Devon Way, Longbridge Technology Park,

Longbridge, Birmingham B31 2TS

For additional info, visit our website at www.toucansolution.com

Thank You

for Purchasing

Tap to reduce volume

Volume down

Tap to increase volume

Volume up

Tap to zoom out

Zoom-out

Tap to zoom in

Zoom-in

Tap to change between camera view modes

View mode

Mute

Mute microphone

Tap to mute or unmute microphone

Voice guidance

Press and hold for 10s to turn voice guidance on/oﬀ

Getting to know your

Video Conference System 360

• Plug the included USB cable into your computer and connect

the end with the type-C connector to the SC360.

• Select SC360 as the default microphone and speaker source.

Select the SC360 as the default camera source.

Connect SC360 to your computer

• Press and hold [ ] for 3 seconds until the Bluetooth

LED on SC360 begins ﬂashing. You will hear connection

guidance voice prompts.

• Enable Bluetooth on your Bluetooth device.

• Select SC360 from the list of available Bluetooth devices

to connect.

• You will hear the SC360 say "Connected".

• Tap [ ] to disconnect with connected Bluetooth device.

Connect SC360 with a Bluetooth Device (Audio Only)

Change Between View Modes

Split Grid PanoramaFocus

• Video Conference System SC360

• Camera Port Cover

• Camera Cover

• Power Adapter

• USB Cable

For detailed product information, set up procedures and FAQ’s

please visit our website: www.toucansolution.com or scan the

QR code.

User Manual | Warranty Card | Thank You Card

Press and hold for 3 seconds to turn SC360 on/oﬀ

Power On/Oﬀ

Bluetooth

Connect with new Bluetooth device

Press and hold to enter Bluetooth pairing mode to connect with a

new Bluetooth device

Disconnect or reconnect with Bluetooth device

Tap to disconnect or reconnect with a paired Bluetooth device

Bluetooth oﬀ

Not connected to any Bluetooth device

Connected to at least one Bluetooth device

Speaker is in Bluetooth pairing mode

Oﬀ

Purple

Blue

Flashing Blue

• When the SC360 is connected to your computer and is

streaming video, tap [ ] to change to another view mode.

The SC360 has four diﬀerent view modes, select the one that

best suits your meeting environment.

• While in Focus, Grid, and Panorama modes, tap [ ] or [ ]

to zoom in or out.

Split - The top and bottom panels will each show a 180 degree view.

Focus - This mode will automatically focus on whoever is speaking.

Grid - The room is split into 4, the focus will be on the person speaking.

Panorama - The top will display a 360 degree view, while the bottom will

display up to 2 people speaking.

360° Microphones

Mute LED

Power LED

Bluetooth LED

User Manual