OWNERS MANUAL Discover yours. 1 totemacoustic.
CONGRATULATIONS We sincerely thank you for having granted Totem’s Kin Play Mini the special place in your living environment. These speakers are designed to redefine your musical understanding and open corridors of new experiences. We hope you not only enjoy but experience Totem as your guide to a new and rewarding listening environment! You will without a doubt experience a Totem moment.
IMPORTANT SAFETY INSTRUCTIONS 1. Read instructions 2 Retainthese instructions 3. Heed all warnings 4. Follow all instructions 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
WARNING Do not ingest the battery, Chemical burn hazard (The remote control supplied with) This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
Accessories included: Speaker wire Optical cable 3.5mm cable Remote 8 adhesive backed feet Power Cord 2 magnetic grilles Front Controls 1.LED Indicator This is the round window on the front bottom left of the active speaker. It captures the signal from the remote, indicates power status, and which source has been selected with different color LEDs.
Rear Connections 1. Aux 1 You can connect this analog input to the analog output of yourTV, cable box, satellite, game, turntable or whatever device you’d like to connect. 2. Phono/Line For all modern electronics this should be left in the “Line” position. When connecting a turntable equipped only with a Phono output, set this to Phono. 3. Ground This is used only with turntables equipped with a ground cable. 4. Aux 2 This 3.5mm input can be used with manyportable devices and computers. 5.
Remote Remove the transparent tab located at the bottom of the remote to activate the battery. Functions are listed below. 1. Power/Standby 2. Previous Track (Bluetooth operation only) 3. Play/Pause (Bluetooth operation only) 4. Bluetooth Input Select 5. Bluetooth Pairing 6. Aux 1 : RCA Input Select 7. Aux 2: Mini Jack Input Select 8. Raise and lower bass 9. Raise and lower treble 10. Mute 11. Next Track (Bluetooth operation only) 12. Optical Input Select 13.
SPEAKER PLACEMENT Totem generally recommends that bookshelf speakers be positioned 12 in (30.5 cm) from the back wall and side wall to allow a better energy flow and cleaner bass response. Moving them closer to boundaries will result in more bass enhancement but can negatively affect the perceived depth of the soundstage. Moving them farther will result in less bass reinforcement. Placing them anywhere from 410 feet (120-300 cm) apartwill generally ensure a proper stereo image.
CONNECTING SOURCES Use the appropriate audio cable to then connect your other sources. Totem has supplied an Optical and Mini jack cable to cover most requirements. If you are connecting a turntable, use the RCA inputs of Aux 1. If your turntable is equipped with a ground wire as well, connect it to the grounding post on the speaker.If the turntable has a built in Phono Pre-Amp, set the switch located below the input to Line. If it does not, set it to Phono.
TROUBLESHOOTING GUIDE No Sound Check to see if the MUTE setting has been engaged. Make sure the correct source has been selected. Verify that the system is powered up and properly connected. No Power/No light in the LED: Verify the main power switch on the amp has been turned on. Verify that the wall AC outlet is functional. Check to see the power cord is securely connected. Cannot connect to Bluetooth Ensure the Bluetooth input has been selected, signified by a solid blue light.
SPECIFICATIONS Driver array: 1” Metal Alloy Dome tweeter and 5¼ ”Natural Hybrid Woofer Power: 2 x 60w RMS Frequency response: 39Hz – 22kHz +-3dB with proper positioning Wireless Connectivity: Bluetooth 4.1 Analog Inputs: Stereo RCA switchable between Phono and Line Level Mini jack (3.5mm) Digital Inputs: Optical Outputs: Subwoofer Out Accessories: Remote Control, speaker wire, interconnects, adhesive feet Dimensions (WxHxD) : 6.38" x 10.63" x 7.87" / 162 x 270 x 200mm Weight: Active: 10.
TOTEM LIMITED WARRANTY Please register online at www.totemacoustic.com within two weeks of the purchase date. The Totem speakers must be purchased from a TOTEM AUTHORIZED DEALER. Keep your original bill or receipt obtained from your Totem Authorized Dealer. Retain the sturdy carton and all packing material; all warranty repairs are required to be shipped in their original packaging. This ensures no damage during transportation. All Totem products are created with the utmost care and quality in mind.
