> KIN AMP TOTEM ® Discover yours. CONGRATULATIONS We sincerely thank you for having granted Totem’s KIN AMP the special place in your living environment. These speakers are designed to redefine your musical understanding and open corridors of new experiences. We hope you not only enjoy but experience Totem as your guide to a new and rewarding listening environment! You will without a doubt experience a Totem moment.
> KIN AMP TOTEM ® IMPORTANT SAFETY INSTRUCTIONS 1. Read instructions 2 Retain these instructions 3. Heed all warnings 4. Follow all instructions 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including Amplifiers) that produce heat. 9.
> KIN AMP TOTEM ® ‘WARNING Do not ingest the battery, Chemical burn hazard (The remote control supplied with) This product contains a coin/button cell battery, If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
> KIN AMP TOTEM ® EE Accessories included: + Remote » Power Cord When packaged as a system with Totem speakers, accessories will also include: » 2x Speaker wire = Optical cable » 3.5mm cable Display Functions The Kin AMP display is touch capacitance. A gentle touch can control the volume and source selection, and when in standby mode, a touch to these same areas can tun on the Amplifier. The display disappears 1 minute after the last function from either the remote or touch display. 1.
> KIN AMP TOTEM ® Rear Connections STATS communal cet oFF AC INPUT SEER 100-120v60H or 220.240 GOH @ mpm de, AA] Crap | Eg. Bae Aux 1 You can connect this stereo analog input to the analog output of your TV, cable box, satellite, game, turntable, or whatever device you'd like to connect. 2. Phonologist For all modem electronics this should be left in the “Line” position. When connecting a tum table equipped only with a Phonon output, set this to Phonon. 3.
> KIN AMP TOTEM ® Remote Remove the transparent tab located at the bottom of the remote to activate the battery. Functions are listed below. = Power/Standby 2. Previous Track {Bluetooth operation only) Play/Pause (Bluetooth operation only) Bluetooth Input Select Bluetooth Pairing Aux 1: RCA Input Select Aux 2: Mini Jack Input Select 8. Raise and lower bass 9. Raise and lower treble 10.Mute 11. Next Track (Bluetooth operation only) 12. Optical Input Select 13.
> KIN AMP TOTEM ® SETTING UP THE KIN AMP Always ensure that the power switch is off before making any connections. Connect the speakers using speaker wire. Be sure to respect the polarity of the wire, connecting the RED and BLACK terminals from the AMP to the speakers. Totem Tress wire, at any length, can demonstrably enhance bass, clarity, and imaging. You are now ready to connect your sources.
= KIN AMP TOTEM BLUETOOTH PAIRING using the REMOTE Turn on the KIN AMP and select the BLUETOOTH Input designated with the BLUETOOTH 5 logo on the remote. BLUETOOTH will appear in the display (see FIG 1). FIG Push Pair on the remote. PAIRING will appear briefly to indicate it’s in pairing mode (see FIG 2). FIG 2 BLUETOOTH will reappear in the display, as in FIG 1, but will now be blinking.
> KIN AMP TOTEM ® TROUBLESHOOTING GUIDE No Sound « Check to see if the MUTE setting has been engaged. « Make sure the correct source has been selected. » Verify that the AMP is powered up and speakers are properly connected. No Power/No display: « Verify the main power switch on the AMP has been muted on. « Verify that the wall AC outlet is functional. « Check to see the power cord is securely connected. Cannot connect to Bluetooth « Ensure the Bluetooth input has been selected.
= KIN AMP SPECIFICATIONS Amplifier Type: Power Output @ 40hm: Total Harmonic Distortion: Signal to Noise Ratio: Frequency response: Wireless Connectivity: Analog Inputs: Digital Inputs: Outputs: Accessories: Dimensions (WxHxD) : Weight: Bluetooth Sampling Rate: Optical In Sampling Rate: Decoding: TOTEM Class D 2x 100w RMS @ THAD% <0.1% @ 30K Filter / 1W >86dB 20Hz —kHz e-3dB Bluetooth 4.1 adapt Stereo RCA switchable between Phonon and Line Level Mini jack (3.
> KIN AMP TOTEM ® TOTEM LIMITED WARRANTY Please register online at www.totemacoustic.com within two weeks of the purchase date. The Totem speakers must be purchased from a TOTEM AUTHORIZED DEALER. Keep your original bill or receipt obtained from your Totem Authorized Dealer. Retain the sturdy carton and all packing material; all warranty repairs are required to be shipped in their original packaging. This ensures no damage during transportation.