OWNERS MANUAL
Discover yours. CONGRATULATIONS We sincerely thank you for having granted Totem’s KIN AMP the special place in your living environment. These speakers are designed to redefine your musical understanding and open corridors of new experiences. We hope you not only enjoy but experience Totem as your guide to a new and rewarding listening environment! You will without a doubt experience a Totem moment.
ACCESSORIES INCLUDED • • Remote Power Cord When packaged as a system with Totem speakers, accessories will also include: • • • 2 x Speaker wire Optical cable 3.5mm cable DISPLAY FUNCTIONS The Kin AMP display is touch capacitance. A gentle touch can control the volume and source selection, and when in standby mode, a touch to these same areas can turn on the Amplifier. The display disappears 1 minute after the last function from either the remote or touch display. 1.
REAR CONNECTIONS 1. Aux 1 You can connect this stereo analog input to the analog output of your TV, cable box, satellite, game, turntable, or whatever device you’d like to connect. 2. Phono/Line For all modern electronics this should be left in the “Line” position. When connecting a turntable equipped only with a Phono output, set this to Phono. 3. Ground This is used only with turntables equipped with a ground cable. 4. Bluetooth Antenna The antenna captures the Bluetooth signal.
REMOTE CONTROL Remove the transparent tab located at the bottom of the remote to activate the battery. Functions are listed below. 1. Power/Standby 2. Previous Track (Bluetooth operation only) 3. Play/Pause (Bluetooth operation only) 4. Bluetooth Input Select 5. Bluetooth Pairing 6. Aux 1 : RCA Input Select 7. Aux 2: Mini Jack Input Select 8. Raise and lower bass 9. Raise and lower treble 10. Mute 11. Next Track (Bluetooth operation only) 12. Optical Input Select 13.
CONNECTING A SUBWOOFER A powered subwoofer can be easily added by connecting a single RCA cable from the Sub Out on the KIN AMP to the Input on the subwoofer. This wire is not included. Adding a Totem subwoofer will substantially add to the bass capabilities of the system. CONNECTING SOURCES Use the appropriate audio cable to then connect your other sources. Totem has supplied an Optical and Mini jack cable to cover most requirements. If you are connecting a turntable, use the RCA inputs of Aux 1.
BLUETOOTH PAIRING USING THE REMOTE Turn on the KIN AMP and select the BLUETOOTH Input designated with the BLUETOOTH logo on the remote. BLUETOOTH will appear in the display (see FIG 1). FIG 1 Push Pair on the remote. PAIRING will appear briefly to indicate pairing mode (see FIG 2). FIG 2 BLUETOOTH will reappear in the display, as in FIG 1, but will now be blinking.
TROUBLE SHOOTING GUIDE No Sound • Check to see if the MUTE setting has been engaged. • Make sure the correct source has been selected. • Verify that the AMP is powered up and speakers are properly connected. No Power/No display: • Verify the main power switch on the AMP has been turned on. • Verify that the wall AC outlet is functional. • Check to see the power cord is securely connected. Cannot connect to Bluetooth • Ensure the Bluetooth input has been selected. • Confirm the AMP is in pairing mode.
TOTEM LIMITED WARRANTY Please register online at www.totemacoustic.com within two weeks of the purchase date. The Totem speakers must be purchased from a TOTEM AUTHORIZED DEALER. Keep your original bill or receipt obtained from your Totem Authorized Dealer. Retain the sturdy carton and all packing material; all warranty repairs are required to be shipped in their original packaging. This ensures no damage during transportation. All Totem products are created with the utmost care and quality in mind.