"rO6HIBA Hi-Fi Video Cassette Recorder W-512 W-511 OWNER'S MANUAL
CAUTION: TO ELECTRIC SHOCK, COVER PARTS REDUCE DO THE RISK NOT REMOVE The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. OF (OR RACK), NO USERSERVlCEARLE INSIDE.
IIVi[ I_1 li I J"Sl _1 I I i ikVI--tV I IVli 'wv i llil Ill Save Original Packing ..... Materials The original shipping carton and packing materials will come in handy if you ever have to ship your VCR. For maximum protection, repack the set as it was originally packed at the factory. Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will mar the finish.
IMPORTANT SAFETY INSTRUCTIONS I I CAUTION: I I III IIII PLEASE READ GIVEN IN THIS RETAIN THIS AND OBSERVE ALL WARNINGS OWNER'S MANUAL AND THOSE BOOKLET FOR FUTURE the following procedures UNIT. REFERENCE. This set has been designed and manufactured to assure personal result in electric shock or fire hazard. The safeguards incorporated you if you observe AND INSTRUCTIONS MARKED ON THE for installation, safety. Improper use can in this unit will protect use and servicing.
Water andMoisture DO notusethisproduct near water -forexample, near abath tub,wash bowl, kitchen sink, orlaundry tub;inawetbasement; ornear aswimming pool and thelike. Unplug this product cleaners or aerosol from the wail outlet before cleaning. Do not use liquid cleaners. Use a damp cloth for cleaning.
IMPORTANT SAFETY INSTRUCTIONS I I 12. For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the Lightning product due to lightning and power-line surges. _ L_ J _',_ __ 13.
ptents INTRODUCTION Provides important notes and general explanation of the VCR, including names of the buttons, jacks, etc SAFETY PRECAUTIONS IMPORTANT .................... PRECAUTIONS ............. 2 3 IMPORTANT SAFETY INSTRUCTIONS ................................... 4 Contents 7 .............................................. Identification • • • • of Controls ...................
tification of Controls '_i[_]"the page in [_ for details. This manual shows the names of buttons in italics. CHANNEL EJECT - i _--_-4_ il TOSHIBA Cassette/compartment :: [ -I18] i J L. :-. mote Sensor / / VCRDisplay 2_4J "iw] REC L1g_[19] PLA Y FF _J To operate your TV. To operate this VCR. VCR Number POWER TV 21212_ [_ CH/TRK buttons A.
-4 30 Cassette o indicator IO C ¢) Timer recording .-I indicator 5 / z I-/177.1-/I-/"'_" -- Hi-Fi VCR / indicator / VCR indicator Multifunctional indicator RF IN (FROM LINE OUT AUDIO jacks ANT.
Open the battery compartment lid on the rear panel. Install 2 batteries ("AA" size) following the polarity diagrams. Close the battery compartment lid. Point the remote control at the VCR and press the buttons Distance: within about 7 m from the front of the remote sensor within the operating range. Angles: within about 30" in every direction Notes on batteries Caring for • The life of the batteries is about 1 year depending on the conditions of use.
t,C#nections "_l_re you use this VCR, it is necessary to connect it to your TV. Several ways of connecting are available depending on your use of TV or cable box. Select one which is applicable to your equipment. VCR _ isconnect the the cable Connect RF antenna OUT terminal from to the your TV. TV VHF/UHF _ J combination antenna _=_.__._ and connect it to the AUDIO/VIDEO jacks are also available III terminal on the ..
Connections (continued) This set-up will enable you to: l incoming cable U _J - record an unscrambled channel. - watch channel - record an unscrambled channel while another (scrambled or unscrambled). an unscrambled while recording it. watching You will need to: • set TV channel to the output channel of the cable box.
0u00e0 Plug the VCR into the AC outlet "Auto" blink while the VCR automatically sets the clock using the data broadcast by the local TV stations. While "Auto" is blinking, channel memory is also set -v =0 rn ..n automatically. -- _ I_AJl ..'n _ Z CANCEL When Auto set up has been completed, standby mode. the VCR is on Notes • It may takes • Press several CANCEL minutes on the remote during the Auto set-up control to cancel the auto set-up.
Settings Using On-screen Display age selection and clock setting must be set first when VCR is first plugged in or after it encounters a power failure. Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 11). • Press VCR to set the remote control operating the VCR. VCR Press POWER POWER to turn on the VCFI. Press PROG.. The following screen appears on the TV. Franr,,als Espahol FF PLA Y, STOP ENTER EnD :_ PROG.
Press Example: To set the clock to 2:30 p.m. on August 25 (summer time) 2001. ENTER to start the "AUTO" clock set feature. Press PROG.. After the VCR is turned off, it automatically updates the clock using the data broadcast by the local TV stations The MENU screen appears on the TV. *The clock is Select "PRESET" using FF or REW, and press ENTER. E)mullU,- wl_ revised by _[D-m--_ I {:LOCK SET il I broadcasting I] su_.,_a.
Channels on the VCR section is required if you receive only normal TV or unscrambled cable channels. Incoming Antenna/Cable(CATV) Signals The VCR scans through all receivable TV and CATV channels and stores only the active ones in your area into the memory. Once the storing is finished, you can select a desired channel using CN/TRK. Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 11).
3) Enter a channel number number buttons. Adding or erasing channels Adding channels If a desired channel automatically added because to the For more than 100 number, first press 100. For CATV channels, refer to the chart below. be scanned of a weak signal, it can be (For other orders, company.) memory. Erasing channels You erase can cannot a stored channel from the 5) Press PROG. two times Selecting stored channels 33 Once the To add channels J IO To enter =u _ !_.
Cassette Use Loading a cassette Push the cassette label side towards appear into the cassette compartment with the window side facing up and the the front. The VCR is automatically turned on. The O--O indicator will in the VCR display. X Ejecting a cassette Press EJECT. The cassetteis ejected from the cassettecompartment. Warning Do not insert your hands or any foreign objects in injury or damage. Precautions when Take special using video into the compartment.
P ] back section explains the basic playback operation. Preparation • Select the video channel (3 or 4) or video input mode on the TV. • Press VCR to set the remote control operating the VCR. Load a recorded cassette. Power is turned on. If the cassette has no safety tab, playback starts automatically. CH/TRK 2 Press PLAYto "G r" start playback. o vc. I /_ FF REW -3 To stop playback, press STOP. I A tape runs at double speed ress PLAYduring playback. playback.
V iable Speed Playback '_lllli_can play back a tape at various tape speeds. A tape runs at 5 times or 7 times the normal playback that you can quickly locate a particular scene. speed so The tape runs at 5 limes the normal playback speed. - PLA Y FF I FlEW To change the tape speed to 7 times the normal playback Press FFor playback. speed, press REWduring and hold FFor REW. If you release it, the tape speed returns to 5 times.
A picture advances I frame by frame. Press PLAYduring still playback. Each time you press PLAY, the picture advances one frame, To resume normal playback Press PAUSE/STILL The I tape runs at 1/7th or 1/15th '1o the normal playback The tape runs at about 1/7th the normal playback Each ress time SLOWduring you press SLOW, playback. the speed alternates 1/15th. To resume normal Press PLAY. speed. speed.
E.I_ITF, Z_ I_rmq]t"._ You can view the clock, linear time counter or tape remaining time in the VCR display or on the TV screen. Each time you press REMAIN/COUNTER, the VCR display changes in sequence as follows: ENTER PLA Y FF REW STOP COUNTRESEt - REMAI_ COUNTER _ Linear time counter -* Tape remaining time (RT) _ Clock The indication above will also appear on the TV screen by pressing DISPLAY.
On the SET UP screen, select "COUNTER MEM." using PLAYor STOP, and set to "ON" using REW or FF. ir.P[_En_T. I _ 16e _.a ENTER PLA Y FF REW STOP COUNTRESET - REMAIN/ COUltER "O Press PROG. to exit. Oo > (b The memory-stop feature allows you to quickly return to a counter reading of "0HOOMOOS"from any point on the tape. Memory stop is automatically turned on whenever the time counter with memory is displayed on the TV screen.
ording a TV Program ection explains the basic recording operation. Preparation . Select the video channel (3 or 4) or video input mode on the TV. Load a cassette with the safety tab attached. Press TV/VCR so that the "VCR" F-o_ indicator appears in the VCR display, l ,c, -2 -6 CHANNEL on the VCR, or CHFI'RK Select a channel to record with or number buttons on the remote [ o_ vc. I- I._1 C_II.._II /_ / I control. 5 If you see "L" in the VCR display, press I.
Ti er Program Recording '_llmii_programmable timer allows you to record up to 6 different programs over one month. Preparation • Select the video channel (3 or 4) or video input mode on the TV. • Make sure that the clock is set correctly (page 15). • Store the channels on the VCR (pages 16 and 17). Example: To record cable channel 25 in the SP tape speed from 9:20 p.m. until 10:00 p.m. on August 30. Today is August 25. Numl_r -bui_ons Load a cassette -.
Timer Program Recording (continued) Move to the next using FF, and set I __[l_ The date changes as follows: STOP. F_ --* 9/25 -*date .,. --_using 7/25 _ PLAYor WKLYSU _ --the 8/25 recording L__ MO~FR <_ WKLYSA, 7 I • _ - : _- _:::: :::__ e, ,_ J an .... wf =,= [WKLYSU]...[WKLYSA]: You can record TV programs on the same channel on the day and time every week. [MO~FR]: You can record TV programs on the same channel on the day and time Monday through Friday.
If the Confirming Press the timer programs PROG. during timer recording The screen for confirming CH PROG.again OATE z_ _se OR OFF _e_o_X :_ ; .... • / : EfiD Press page. mode. will appear. If -:-- failure program occurs during recording • When a power failure has occurred, "--:--" appears in the VCR display. Since the programmed contents have been cleared, reset the clock and timer programming.
Broadcast Compatibility "_Illi_VCR can receive or record MTS (Multichannel TV Sound) broadcasts. By connecting your stereo system or stereo TV, you will experience the SAP or stereo sound. the VCR to Preparation Connect a stereo TV or stereo system to the AUDIO OUT jacks of the VCR. On the SET UP screen (page 14), select "SAP SET" using PLAYor STOP, and set to "ON" using REW or FF. A.SELECT TRP[ t[13511_ J _2-8 !_,,Psii---j i 69 180 o_- oft 1 EnD : OISPt.AY Press PROG. Perform once to exit.
Rejnote "Ml_remote Control for TOSHIBA control can control TOSHIBA 1 Press TV's TVs. TVto set the remote control operating your TV. POWER CH/TRK Point the remote control at your TV and use each button listed below to make sure that your TV is operate correctly. too Number Buttons ENTER DISPLAY LSELECT POWER To turn the TV on or off. CH/TRK To select TV channels direction, TV VOL To adjust the sound level. To select an external source I.
LB ore Calling Service Personnel "qllilii_ck No the following symptoms before requesting power• • The power cord is not plugged in. - Plug the power cord into the outlet firmly. Although not work. the power is on, the VCR will servicing. The desired sound SAP, stereo, or regular Noise - Load a cassette. played.
The remote control does not work properly. • The batteries are exhausled - Replace all batteries. (page 10) • The remote control is operated beyond the operating range. - Make sure the remote control is within 30 ° of the remote sensor on the VCR. (page 10) • Too far from the VCR. - Use the remote control within 7 m from the front of the VCR. (page 10) • An obstacle may be in the way of the operation. - Remove the obstacle. • The operating mode of the remote control is not set correctly.
Specifications Power Supply: 120 V AC, 60 Hz Power consumption: External dimensions: 360 x 94 x 252mm Mass: 3.0 kg Channels 18W received: VHF: Channels 2-13 UHF: Channels 14-69 CATV: Channels Antenna input/output A7-A1 ,A-CCC, 66-125 UHF/VHF: 75 _-_F type connector Standard NTSC terminals: Signal system: Recording/Playback (W.H.D.) Recording: system: Playback: Cassette: VHS format (SP, SLP) VHS format (SP, LP, SLP) Video cassette with _ mark SLP: 11.1 mm/s, SP: 33.
TOSHIBA VIDEOCASSETTE RECORDER Toshiba America Consumer Products, Inc. ("TACP") and Toshiba Hawaii Inc. ("THI") make the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
HowtoObtain Warranty Service (1)Refer to the troubleshooting guide in your owner's manual. This check list may solve your problem. (2)Call the TACP toll free number 800-631-3811 within (30) days after you find a defective product or part. (3)Arrange for the delivery of the product to the Authorized TACP/THI Service Station.
