OWNER’S MANUAL TELEVISION/VCR COMBINATION MV13N3 ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. TV/CATV MODE SELECTION When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable Television) mode. If not using CATV, set this menu option to the "TV" position. Before operating the unit, please read this manual thoroughly.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS 2. All the safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS 3. The safety and operating instructions should be retained for future reference. HEED WARNINGS 4. All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS 5. All operating and use instructions should be followed. CLEANING Unplug this unit from the wall outlet before cleaning.
IMPORTANT SAFEGUARDS (CONTINUED) 12. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
20. SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. 21. HEAT The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 22.
FEATURES Color TV With Video Cassette Recorder - Unique space saving design combines a color TV and a video cassette recorder. High Quality Picture Technology - This TV/VCR equipped "HQ" incorporates VHS High Quality technology. A built-in detail enhancer is used to boost the recorded signal and provide picture quality during playback. It is compatible with other VHS video cassette recorders. 181 Channel Tuner - Receives standard VHF and UHF broadcast channels and up to 113 cable channels.
TABLE OF CONTENTS Please read the descriptions and operating procedures contained in this Owner’s Manual prior to operating your new TV/VCR. PREPARATION SAFETY PRECAUTIONS ....................................................................................................................................... 6 LOCATION OF CONTROLS ................................................................................................................................... 8 REMOTE CONTROL ...............................
SAFETY PRECAUTIONS MOISTURE CONDENSATION DO NOT OPERATE ANY FUNCTIONS ON THIS UNIT FOR AT LEAST THREE HOURS WHEN MOISTURE IN THE AIR CONDENSES ON IT. LET THE UNIT STAND WITH POWER ON (SEE BELOW). WHAT IS MOISTURE CONDENSATION? When a cold liquid is poured into a glass, for example, water vapor in the air will condense on the surface of the glass. This is called moisture condensation. MOISTURE WILL CONDENSE ON THE UNIT IN THE FOLLOWING CASES; • When you move the unit from a cold to a warm place.
Do not insert fingers or any other objects into the cassette loading slot. Do not spray cleaner or wax directly on the unit or use forced air to remove dust. Avoid places subject to strong vibration. Use in a horizontal (flat) position only. Keep the unit away from flower vases, sinks, etc. If liquids should be spilled into the unit, serious damage will result.
LOCATION OF CONTROLS FRONT REAR 1 ANT. 3 4 2 5 6 15 7 16 POWER TIMER REC 8 REC REC VOLUME 9 10 CHANNEL 11 PLAY STOP/EJECT REW FF 12 13 LINE IN VIDEO AUDIO PHONE 14 DESCRIPTION OF CONTROLS FRONT: 1. Cassette Loading Slot - To insert or remove a video tape. 2. POWER Button - Press to turn the TV/VCR on or off. 3. TIMER REC Indicator - Lights when the unit is in the Timer Record Mode. 4. REC Indicator - Lights up when the TV/VCR is recording. 5.
REMOTE CONTROL 1 8 16 22 2 9 23 3 10 4 11 12 24 17 25 18 26 13 19 5 27 14 20 6 15 21 28 7 DESCRIPTION OF CONTROLS 1. CLOSED CAPTION Button - Switches between Caption, Text and TV modes for Closed-Captioned programs. 2. Direct Channel Selection Buttons (0-9) - Allows direct access to any channel. 3. CALL Button - Displays the present time/day of the week, channel, counter, speed selection (and VCR mode if VCR is operating) on the TV screen. 4.
REMOTE CONTROL (CONTINUED) BATTERY INSTALLATION 1 2 Slide the battery compartment cover in the direction of the arrow. Install two “AAA” batteries, paying attention to the polarity diagram in the battery compartment. 3 Replace the compartment cover. BATTERY PRECAUTIONS The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2.
ANTENNA CONNECTIONS If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CATV), see page 13 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/ UHF antenna to the Antenna Jack. ANT. ANT.
ANTENNA CONNECTIONS (CONTINUED) INDOOR ANTENNA (NOT SUPPLIED) Insert a twin-lead telescopic antenna (not supplied) into the mounting hole on the back of the cabinet until it locks into place. Attach the antenna plug to the antenna jack. Adjust the length and angle of the antenna rods to receive the best possible picture. ANT.
CABLE TV CONNECTIONS This TV/VCR has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
SETTING THE LANGUAGE This TV/VCR can display the on screen language in English, Spanish or French. On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options. 1 2 Press the MENU button. Press the SET/TR + or – button to select the SYSTEM SETUP option, then press the ENTER button.
AUTO CLOCK SETTING The Auto Clock function will automatically set the built-in clock (Month, Day, Year and Time) when the TV/VCR is connected to an Antenna or Cable system and it is turned off. As the TV/VCR searches for a receivable station in your area and it receives a broadcast signal for Auto Clock, the Auto Clock needs several minutes to set itself. AUTO CLOCK SETTING 1. Connect the Antenna or Cable system. • If you use a cable box, turn it on. 2. Plug the AC Power cord to the AC outlet. 3.
AUTO CLOCK SETTING (CONTINUED) DAYLIGHT SAVING TIME SETTING You can set the Daylight saving time automatically or manually. 1 Press the MENU button. Press the SET/TR + or – button to select the SYSTEM SETUP option, then press the ENTER button. MENU Press the SET/TR + or – button to select the DAYLIGHT SAVING TIME option, then press the ENTER button.
MANUAL CLOCK SETTING You must set the date and time manually for Timer Recordings, ON/OFF Timer and Daylight Saving Time if the Auto Clock process did not set them correctly. EXAMPLE: Setting the clock to “8:30 AM”, 29th (SAT) March, 2003. 1 Press the MENU button. Press the SET/TR + or – button to select the SYSTEM SETUP option, then press the ENTER button. MENU Press the SET/TR + or – button to select the CLOCK SET option, then press the ENTER button.
TV OPERATION 1 To turn on the TV/VCR, press the POWER button. 3 Adjust the volume level by pressing the VOLUME + or – button. The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases. 2 POWER VOL – Set the TV/CATV menu option to the appropriate position (See page 22).
CHANNEL + / – MUTE Press and release the CHANNEL + or – button. The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See pages 23 and 24 “To memorize channels”. Press MUTE button to switch off the sound. The TV/ VCR’s sound will be silenced and “MUTE” will briefly appear on the screen. The sound can be switched back on by pressing this button again or one of the VOLUME + or – buttons.
TV OPERATION (CONTINUED) SLEEP To set the TV/VCR to turn off after a preset amount of time, press the SLEEP button on the remote control. The clock will count down 10 minutes for each press of the SLEEP button (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press the SLEEP button and the remaining time will be displayed for a few seconds.
WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. CLOSED CAPTIONING WITH A VCR Closed Captioned programs can be recorded and played back on a VCR with the Closed Captioned text intact.
TO MEMORIZE CHANNELS This TV/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/VCR’s memory. In addition to normal VHF and UHF channels, this TV/VCR can receive up to 113 Cable TV channels. To use this TV/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.
AUTOMATIC MEMORY TUNING 1 2 Press the MENU button. Press the SET/TR + or – button to select the CH SETUP mode, then press the ENTER button.
TO MEMORIZE CHANNELS (CONTINUED) TO ADD/DELETE CHANNELS 1 2 Press the MENU button. Press the SET/TR + or – button to select the CH SETUP mode, then press the ENTER button. Press the SET/TR + or – button to select the ADD/ DELETE mode, then press the ENTER button.
SETTING THE V-CHIP An age limitation can be set to forbid children to watch programs according to “TV RATING” and “MOVIE RATING” level set. To use the V-Chip function, you must register a password. TO REGISTER PASSWORD 1 2 Press the MENU button. Press the SET/TR + or – button to select the TV SETUP option, then press the ENTER button.
SETTING THE V-CHIP (CONTINUED) TO SET THE V-CHIP 1 In the V-CHIP SET menu, press the SET/TR + or – button to select the TV RATING, then press the ENTER button. SET/TR 2 Press the SET/TR + or – button to display the desired setting, then press the ENTER button.
4 Press the SET/TR + or – button to select desired rating, then press the ENTER button.
SETTING THE V-CHIP (CONTINUED) TO CHANGE PASSWORD 1. Press the MENU button. 2. Press the SET/TR + or – button to select the TV SETUP, then press the ENTER button. MENU TIMER REC SET TV SETUP CH SETUP AUTO REPEAT ON OFF SYSTEM SETUP á 3. Press the SET/TR + or – button to select the V-CHIP SET, then press the ENTER button. TV SETUP V-CHIP SET ON/OFF TIMER PICTURE á 4. Enter the Password using the Direct Channel Selection buttons (0-9), then press the ENTER button.
TO SET THE ON TIMER This feature allows you to have the TV/VCR automatically turn “ON” at a predetermined time. If you program the ON TIMER once, the TV/VCR will turn on on the programmed day (daily/weekly) at the same time to the same channel. EXAMPLE: Turning on the TV to channel 12 at 7:00 AM, MONDAY-FRIDAY. 1 Press the MENU button. Press the SET/TR + or – button to select the TV SETUP option, then press the ENTER button.
TO SET THE OFF TIMER This feature allows you to have the TV/VCR turn “OFF” automatically at a predetermined time. If you program the OFF TIMER once, the TV/VCR will automatically turn off at the same time everyday. EXAMPLE: Turning off the TV at 11:30 PM. 1 2 Press the MENU button. Press the SET/TR + or – button to select the TV SETUP option, then press the ENTER button. SET/TR MENU Press the SET/TR + or – button to select the ON/OFF TIMER option, then press the ENTER button.
PICTURE CONTROL ADJUSTMENTS Picture controls are factory preset but you can adjust them individually as follows: 1 MENU Press the SET/TR + or – button to select the PICTURE option, then press the ENTER button. 2 To display the picture adjustment screen, press the MENU button. Press the SET/TR + or – button to select the TV SETUP option, then press the ENTER button.
PICTURE CONTROL ADJUSTMENTS COLOR TINT Press the ENTER button until “COLOR” appears on the screen, then press the SET/TR + or – button to adjust the color intensity of the picture. The control should be set when colors appear normal in intensity and brilliance. ENTER (CONTINUED) Press the ENTER button until “TINT” appears on the screen, then press the SET/TR + or – button to adjust the tint of the picture. This determines how accurately the colors are reproduced by the TV.
LOADING AND UNLOADING A VIDEO CASSETTE Use only video cassette tapes marked . LOADING Push the center of the tape until it is automatically retracted into the TV/VCR. AUTOMATIC POWER ON AND PLAY When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically and playback will start immediately. Insert the cassette with its labeled side facing you. An inverted video cassette cannot be inserted.
LOADING AND UNLOADING A VIDEO CASSETTE (CONTINUED) TO PREVENT ACCIDENTAL ERASURE After recording, break off the erase prevention tab if you do not wish to record over the tape. Screwdriver Erase prevention tab TO RECORD AGAIN Cover the hole with adhesive tape. Be careful the tape does not extend past the edges of the video cassette housing.
PLAYBACK To play a prerecorded tape. TO START PLAYBACK 1 2 To turn on the TV/VCR, press the POWER button. Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically).
PLAYBACK (CONTINUED) TO REWIND OR FORWARD THE TAPE RAPIDLY Press the REW (Rewind) button in the Stop mode. “ ” will appear on the screen. Press the FF (Fast Forward) button in the Stop mode. “ ” will appear on the screen. REW FF FORWARD/REVERSE PICTURE SEARCH If you want to see the tape during REW or FF mode, press and hold the REW or FF button. The backward or forward visual search picture will be seen on the screen. Release to return to the REW or FF mode.
SPECIAL PLAYBACK TO VISUALLY SEARCH FOR DESIRED POINTS When either the FF or REW button is pressed in the PLAYBACK mode, the speed search picture will appear. When pressed twice, the search picture will increase speed. Speed search time depends upon the speed used (SP or SLP) during recording. See chart below. To rewind or fast forward a tape, press the STOP button, and then press the REW or FF button. To visually search backward, press the REW button once or twice in the PLAYBACK mode.
SPECIAL PLAYBACK (CONTINUED) TO WATCH A TAPE REPEATEDLY 1 2 Press the MENU button. Press the SET/TR + or – button to select the AUTO REPEAT option.
RECORDING A TV PROGRAM RECORDING AND VIEWING THE SAME TV PROGRAM 1 2 To turn on the TV/VCR, press the POWER button. Load a cassette tape with the erase prevention tab intact.
RECORDING A TV PROGRAM 5 (CONTINUED) 6 Press the Direct Channel Selection buttons or CHANNEL + or – button to select the channel to be recorded (Example: Channel 12). Press both the REC buttons at the same time. " ● " and the channel number will appear on the screen and the REC indicator will light.
ONE-TOUCH TIMER RECORDING (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. EXAMPLE: One-touch Timer Recording for 30 minutes. 1 2 Press the POWER button to turn on the TV/VCR. 3 Press the SP/SLP button to select the desired tape speed (SP or SLP). SP or SLP will appear on the screen. Load a video cassette with the erase prevention tab intact.
TIMER RECORDING Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. EXAMPLE: Program a timer recording for 23rd day, channel 007 (CATV), 7:00 - 9:30 PM (Tape speed : SLP). • Load a video cassette with the erase prevention tab intact. The TV/VCR will automatically turn on. • Set the TV/CATV selection to the appropriate position (See page 22). 1 2 Press the MENU button.
5 Set the start time, end time, channel and tape speed as in step 4.
OTHER FUNCTIONS FOR THE TIMER RECORDING TO CONFIRM THE SETTINGS TO SET DAILY/WEEKLY TIMER When setting the date in the step 4 on page 42, press the SET/TR – button repeatedly when the current day is displayed. The setting changes as follows: Press the PROGRAM button once. The TV screen displays the timer program list. Press the PROGRAM button again. The TV screen displays the ON/OFF timer setting.
USING THE REAL TIME TAPE COUNTER The On-Screen Real Time Tape Counter shows the tape running time in Hours, Minutes and Seconds. You can easily determine how long the tape has been running or how much time is left on the tape. TO VIEW THE COUNTER DISPLAY 1 2 Press the CALL button. Press the COUNTER RESET button to set the counter to “00:00:00”.
USING ZERO RETURN The zero return function provides a convenient method of rapidly returning to the starting point of recording or playback. The starting point can be indexed for any location on the tape by pressing the COUNTER RESET button and ZERO RETURN button. 1 2 Press the CALL button. Before playback or recording, press the COUNTER RESET button to set the counter to “00:00:00”.
DUPLICATING A VIDEO TAPE If you connect the TV/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. 1 Insert a blank cassette with the erase prevention tab intact into the TV/VCR. Insert a previously recorded cassette into the playback VCR or Camcorder. 2 Press the INPUT SELECT button to select AUDIO/VIDEO input position. "LINE" will appear on the screen.
PROBLEM AND TROUBLESHOOTING GUIDE Check the following chart before requesting service. SYMPTOM CAUSE POSSIBLE SOLUTION PAGE POWER No power. Although the power is on, the TV/VCR does not operate. The AC power cord is not connected. Connect the AC power cord to the AC outlet. 7 Cassette is not inserted. Insert a video cassette. 33 TIMER REC buttons is depressed. Press the TIMER REC buttons. 43 TV BROADCAST RECEPTION Poor or no picture. Try another channel. Picture control is not adjusted.
SYMPTOM TV shuts off. Closed caption is not activated. CAUSE POSSIBLE SOLUTION PAGE TV station stopped broadcasting. Tune new channel. 18 Sleep timer is set. Set Sleep Timer to "0". 20 OFF timer is set. Set OFF TIMER to "CANCEL" TV station experiencing problems or program tuned is not closed captions. Try another channel. 18, 19 TV signal is weak. Check CATV connection of VHF/ UHF antenna, reposition or rotate antenna. 11, 13 30 The CLOSED CAPTION button is not depressed.
RECEPTION DISTURBANCES Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/VCR is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
VIDEO HEAD CLEANING VIDEO HEAD CLOGGING The video heads are the means by which the TV/VCR reads the picture from the tape during playback. In the unlikely event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be determined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely snowy). If this is the case, use a high quality head cleaning system or have them cleaned professionally.
LIMITED WARRANTY TOSHIBA COMBINATION TELEVISION AND VIDEO CASSETTE RECORDER Toshiba America Consumer Products, Inc. ("TACP") and Toshiba Hawaii Inc. ("THI") make the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee .
How to Obtain Warranty Service If after following all of the operating instructions in this manual and checking the section "PROBLEM AND TROUBLESHOOTING GUIDE" and you still find that service is needed; ( 1 ) Call the TACP toll free number 1-800-631-3811 after you find a defective product or part to find the nearest Toshiba Authorized Service Station. ( 2 ) Please present your bill of sale or other proof to the Authorized Service Station.
J5E20201A U 02/12 5E20201A P44-BACK PRINTED IN THAILAND 54 12/11/2002, 10:33