TOSHIBA Projection Television OWNER'S MANUAL TP5OH50 ColorStream @ TOSHIBA CORPORATION, 1998 TM
Dear Customer Welcome to the high quality picture world created by the TOSHIBA Projection Color Television. 13_._ r. .... a. vv...emp , ...... _ o , T I=* .......... you u_e the "IV• s many excltmng and useful features. Before on_rp*_" 3 *.h_-.'_._, pl_8_elread all the safety and operating instructions in this manual ---- -- thoroughly, Cu'- and k_e_D.L_ ' r_l for future reference. ,_G_LI-------,J stomer _weetTra _,'i , -- yo. will _=-._ ;_- .... J_7_r _nd serial number on the back of the TV.
Table of Contents INTRODUCTION Care and Cleaning ........................................................ Installation .................................................................... To install the TV ....................................................... 4 5 5 ADVANCED Enhancing the Surround Sound Effect ..................... 28 To activate the Surround sound function ............ 28 Aotenna/Cable TV Connections ................................. 6 To connect a home antenna .......................
I Care and Cleaning _ INTRODUCTION @@ Csre Do not stand or climb on the TV. • The "IV is dangerous if broken or if it has fallen over. • Be careful when children are present. Do not remove the back cover and never remodel the cabinet or components. • Let only qualified technicians check and adjust your'IV. Do not place containerswlth liquids such as drinks or cosmetics on the TV. If any foreign material or water teaks into the TV, unplug the AC cord and contact your dealer.
Installation _ INTRODUCTION Downward spot lights or fluorescent lights in an overhead "Honeycomb" prevent direct illumination of the screen. I Use curtairis blinds Where to install Place the "IV on the floor or on a sturdy platform. The mounting surface should be flat and steady. If you instatl the "IV on a soft floor, make sure that the floor is not damaged by the weight of the TV.
Antenna/Cable Connections I _ • • • • • TV INTRODUCTION You can use either an indoor or outdoor antenna to receive VHF and/or UHF channels, Channels 2-13 are VHF channels, and channels 14-69 are UHF channels. We recommend using an outdoor antenna for better picture quality. You can receive Cable TV by connecting the cable supplied by your local cable company, o " .
lI_ F]L"_IiliiT_i[s,]_"_ ILTI Generally, the lead-in cable for a cable "IV system can be connected directly to the TV antenna terminal just like a home antenna. {A-l) Some cable companies, however, offer "premium pay channels'. Since premium pay channel signals are scrambled, a cable TV converter/decoder is generally provided to the subscribers by the cable TV company. This decoder box is necessary for normal viewing of the scrambled channels.
I Antenna/Cable TV Connections (continued) _ Antenna/Cable INTRODUCTION TV connection via VCR (Simplified method) Antenna or Cable lead-in VCR Notes: • Tape playback may often cause the VCR to interrupt the antenna signal to the TV. If you cannot select a certain channel, try pressing the TV/VCR button on the Remote Control. • VIDEO/AUDIO connections from the VCR to the TV are required for stereo tape playback of good quality from stereo VCRs (or Picture-in-Picture operation). See page 47.
Location of Controls _ INTRODUCTION • The following describes the functions of each part of the "IV and the Remote Control. For the use of each control, refer to the pages in brackets. TV front TV rear I ooo ooo Press to open the door. VIDEO/AUDIO terminals [46 - 51] W/VIDEO button* [47] ENTER button [17] POWER indicator / Behind the door / ME!U button1161 DEMO button 17 * These buttons have dual functions.
Location of Controls _ INTRODUCTION (continued) Only the buttons used to operate the TV are described here. For details on the use of each control, refer to the pages in brackets. Aim at the remote sensor on the TV l MUTE [23] POWER [22] RECALL [23] @®® ¢)®® Channel Number [22] $$£ CHANNEL • / • [22] Menu A/• [16] TV/CABLE/VCR switch [12, 13] Set to "IV" to control the TV. FAVCH • / • [42] @ MENU/ENTER[16, 17] VOLUME < / • [22] Menu
Before Using the Remote Control _ INTRODUCTION With this Remote Control, you can operate your "IV and most VCR and cable box models regardless of the manufacturer. However, this Remote Control must first be programmed to control other VCR and cable box brands. See page 13. If you have a TOSHIBA VCR, your Remote Control has already been programmed for you. Before attempting to operate your Remote Control, install the batteries according to "To install the batteries" below.
Using the Remote with VCR or Cable TV Converter I _INTRODUCTION • To control a TOSHIBA VCR, first set the TV/CABLENCR switch to ?VCR." The buttons shown below will then control the VCR. The rest of the buttons operate the TV as usual. If you have another brand of VCR, you can probably program the Remote Control to contro_ it. Details are on page _3. • To control a cable "IV converter, this Remote Control must be programmed to recognize the brand of your converter. See page 13.
_ INTRODUCTION Programming Control the Remote • This Remote Control is programmed to operate TOSHIBA VCRs. • To operate VCRs (or Cable converters) other than TOSHIBA models, perform the following procedures before operating. POWER 1 If more than one number is listed, try eachone separately until you find the one that works.
Programming the Remote Control (continued) _ INTRODUCTION • The code numbers listed below were the most recent ones available at the time of printing. New code numbers may or may not have been added since printing, VCR code table BRAND NAME Adventura .............. Aiko ......................... Aiwa ........................ Akai ......................... CODE NUMBER 019 297 019 060, 068, 080, 125 261 American High ....... 054 Asha ........................ 259 Audiovox ................ 056 Beaumark ...
Cable "IV converter BRAND NAME code table CODE NUMBER ABC ....................... 020, 022, 026, 027, 030, 032, 033, 036, 066 Antronix ............... 041 Archer ................... 041,058, 172 Belcor ................... 075 Cable Star ............ 075 Cabletenna ........... 041 Cableview ............ 041 Century ................. 172. Citizen ................... 172 Color Voice .......... 044, 050 Comtronics .......... 059, 079 Contec .................. 038 Dae Ryung ........... 027 Eastern ...........
I Quick Reference Menu Guide _ INTRODUCTION • We recommend that you familiarize yourself with these procedures for using the Menu function. [v_F'Jtl_l _l_J[_ Ill Press MENU to call up an on-screen menu. 4p Press < or I_ to select the menu. PICTURE AUDIO SETUP PREMIUM Press • or • to select an item.
Demonstration @ SBS mode When you pressDEMO on the "IV, the TV will automatically display a variety of itson-screen menus and special features. This function is provided for demonstration purposes only. Press DEMO. The on-screen demonstration will start after about 4 seconds. PREFERENCE C.CAPTION TOSHIBA COLOfl TV eTECHNOLOGY ePERFOI_V_NCE eEXCITEMENT To stop the on-screen demonstration Press DEMO again.
_GETrlNG STARTED Programming Memory Channel • The channel memory is a list of TV channel numbers the TV tunes in when you press the CHANNEL • / • button. First, use the W/CABLE and CH PROGRAM functions to preset all active channels in your area automatically. If necessary, arrange the preset channels with the ADD/ERASE function so you tune into only the desired channels. W/CABLE function Press POWER to turn on the TV. then select an active channel. (See page 22 for details.
ENTER _ > V Li A CHANNEL After performing the CH PROGRAM function, you can add or erase specific channels. 1 Select the channel to erase using the CHANNEL • or • button, or select the channel to add with the Channel Number buttons. See page 22 on how to select channels. Press MENU, then press • or • until the SET UP menu appears. @ TVICABLE CH PROGRAM LANGUAGE ADD/ERASE TIMSRICLOCK ® 00 I Press • (or •) until "ADD/ERASE" is highlighted. Press • or •.
I Alig" = nin gS't"l colors e • This projection TV uses three separate "IV tubes: a red one, a green one, and a blue one. The red, green, and blue images are projected onto the screen where they converge to form a full color picture. You can see a clear picture only when they converge correctly. • Convergence may drift over time or if you move the "IV. If you can see clear images on the screen, skip this procedure.
Press EXIT to display the circumference CONVERGENCE memu. • -I- PUSH Press the corresponding Number button (1-9) to select the place you want to adjust. 4- Example: Number 1 m BLUE PUSH ENTER TO SELECT COLOfl PUSH EXIT TO Press ENTER select color "RED"is or "BLUE'. The to selected highlighted. • 1-9 SELECT POSITION _ t- RED PUSH ENTER TO SELECT COLOR PUSH EXIT TO SELECT POSITION 9 Press &, v, ,t,or_ to convergethe red or blue line into the green line.
I Watching TV Programs _BASIC OPERATION First set the TV/CABLE/VCR switch on the Remote Control to "'iV". 1 2 RECALL @ MUTE ® STEREO SAP ABCO TV POWER 4 Select the desired program in one of the following two ways. To scan the memorized channels in numerical sequence Press CHANNEL • to select the next higher channel. Press CHANNEL • to select the next lower channel. Press the button again to select the next memorized charmer.
Convenient Functions _ BASIC OPERATION Remote To display on-screen information Press RECALL to display the following onscreen information. • • • • STEREO SAP Channel label (if previously preset) Channel number or VIDEO mode selected Time (if the clock has been set) STEREO or SAP audio status ABOC 10:25 4 TV To mute the sound O0 Press MUTE to mute the soundthe immediately without affecting picture. .! O0 @ MUTE To restore the sound, press MUTE again.
Controlling the Picture _ BASIC OPERATION To adjust the picture quality You can adjust the picture quality (CONTRAST, BRIGHTNESS, COLOR, TINT, and SHARPNESS) to suit your personal preference. PressMENU, then press < or • until the PICTURE menu appears. CONTRAST BRIGHTNESS OOLQR TINT SHARPNESS RECALL MUTE POWER Press • (or •) until the item you want to adjust is highlighted.
To select the color temperature ENTER < > v lii These selections change the appearance of gray and white tones of 1he picture. Press MENU, thenmenu press appears. • or • until the PREFERENCE COL(3R T E_IpERATUR_ P I CTURE PREFERENCE @ RECALL ® Press • or • until TEMPERATURE" is "COLOR highlighted. MUTE QQ® ®®® ®®® @ PICTURE PREFERENCE_ Press < or • to you want.
I Con troiiin gthe Sound • You can adjust the sound quality (BASS, TREBLE and BALANCE) to suit your personal preference. Press MENU, thenappears. press • or • until the AUDIO menu ms I BASS TREBLE BALANCE SPEAKERS i @ Press • (or • )until the item you Want to adjust is highlighted. Example: Adjusting "BASS." POWER @ IE_IJ. ® MLrIIE @®® @®® ®®® TREBLE BALANCE SPEAKERE @ 3 Press < or • to adjust the level.
Selecting Stereo and SAP Broadcasts _ BASIC OPERATION • The MTS (Multi-channel TV Sound) feature allows you to improve your "IV viewing with high fidelity stereo sound. MTS also provides for an extra audio channel, SAP (Second Audio Program), used to transmit a second language or other audio information. To listen to stereo sound ENT_ER '_ _> V A When the TV receives a stereo broadcast, the word "STEREO" (or "SAP") is displayed on the screen.
I Enhancing the Surround Sound Effect _ ADVANCED OPERATION • This "IV allows you to activate or deactivate the stereo surround effect. ENTER '( )* V A Selectthe"STR" (stereo) mode following steps 1 through 3 on the previous page. I ] Press MENU, then press • or • until the PREMIUM menu appears. SURROUND I_ POWER @ ® _JECALL MUTE @ QQQ ®®® Q®® ®®@ 3 Press • or • to select"SURROUND." Press • or • to highlight =On.
I OpeO===mr'a'tin; Sub-Bass t"he System • The Sub-Bass System allows you to improve bass performance (even when the sound volume is low). ENTER < To activate > the Sub-Bass System Press MENU, then press the SBS menu appears, 4 or • until SB$ Press • or • until"SBS" highlighted. @ RECALL. ® MUTE _WI SBS LEVEL SBS LEVEL is _ @®® ®®® ®®® 3 Press < or • to select'On," To adjust the SBS level ®®ii Select"SBS LEVEL"in the SBSmenu. Press < or • to adjust the SBS level.
I Setting the OFF Timer and the Clock _ ADVANCED OPERATION • With the OFF timer, you can set the TV to turn off automatically after a pre-determined period of time (in 10 minute increments, up to 180 minutes). Press MENU, then press < or • until the SET UP menu appears, TV/CABLE OH LANGUAGE ADD/ERASE TIMER . . . I I CLOCK .. Press • (or • ) until "TIMER/CLOCK _ is highlighted. MUTE POWER @ ® Q • Press or • to display the TIMER/ CLOCK
Press MENU, then press • or • until the SET UP menu appears. Press • (or • ) until "TIMER/CLOCK" is highlighted. Press or • to display the TIMER/ CLOCK• menu. Press • or • to select "CLOCK". ETIMER/CLOCK CLOCK '3D 4 Press • or • until "CLOCK" is highlighted. Then press four Number buttons to enter the correct time. The remaining number(s) to be adjusted will flash continuously. IITFMER/CLOCK FAVCH Example: To set 12:06 p.m. Press 1, 2, Oand 6. • The clock operates on a 12 hour-cycle.
I WatB= mchi"ng'Pi ure-i t n-Pictu re • In addition to the main picture, another TV program or video source being received through the VIDEO input jacks can be displayed simultaneously as a small picture. • When using the PIP, the TV can display two pictures at once. However, to watch two different pictures, one picture must be received from an antenna and the other must be from an external VIDEO source. See the next page.
To connect a VCR to the TV for PIP Antenna]Cable lead-in See page 8 for detailed antenna/Cable TV connection. TV rear Antenna input Antenna _ output VCR Audio Video outputs output (not supplied) Audio cable (not supplied) To use the PIP CH • / * button To select an input source for PIP Press SOURCE repeatedly to select an input source for the small picture. Select "VIDEO 1" or "VIDEO 2." V.
I Watching r_ ADVANCED Pi ure-in-Pi ure OPERATION (continued) To change the position of the small picture Press LOCATE repeatedly while a small picture is displayed. The display position of the small picture will change in order. l RECALL_ t MUTE(_ @®® ®®® ®®® To switch @®@ the main and smafl picture Press SWAP while a smatl picture is displayed. The main and small pictures will switch. To switch them again, press SWAP again.
Displaying XDS Information _ ADVANCED OPERATION Select the desired program. Press MENU, then press < or • until the CLOSED CAPTION menu appears, xos CLO_ED CAPTION @ ® @®® @®® ®®® ®®@ FAV CH 3 Press • or • until "XDS" _1 is highlighted. m_ CLOSED CAPTION 4 Press < or • to display the following XDS (eXtended Data Service) information for about 30 seconds.
I Operating the Closed Captioning Feature _ ADVANCED OPERATION To view captions Closed captioning is a printed version of the dialogue, narration, and/or sound effects of a TV program. Captions will appear at either the top or bottom of the screen during captioned broadcasts as shown. Captioning is especially helpful for hearing impaired individuals. Se ect the desired program. Press MENU, CAPTION then press < orappears.
To view text Text is information presented using all of the television screen. It is usually not related to the current program. For example, it could be a listing of closed captioned programs, news, weather information, or stock market reports. Select the desired program. Press MENU, then press < or • until the CLOSED CAPTION menu appears. xos I CLOSED CAPTION E Press • or • until "CLOSED CAPTION" is highlighted.
_ ADVANCED OPERATION Locking Channels • With this function, you can lock out specific channels by entering your own 4-digit code. The "IV will not be able to tune to those channels for the next 24 hours, unless you enter the code. This "IV has 8 memory spaces total -- 4 for TV mode and 4 for CABLE mode. Press MENU, then press • or • until the SET UP menu appears. TVICABLE CH LANGUAGE ADD/ERASE TIMERICLOCK I P_a RECALL_ MUTE_ O Press • (or •) until "CH LOCK" is highlighted.
Press ENTER, 8 Repeat steps 6 and 7 for other channels. To unlock channels Select CH LOCK in the SET UP menu, then press < or • to select "Clear." INCH LOCK C_l PASSWGF_D CH INPUT LOCKED CH TV CH 0 0 0 30 CABLE 2 Press v until "PASSWORD" is highlighted, and enter the 4-digit code used to lock out the channels with the Number buttons (0-9). 0 24 0 15 _=--._.V. _®_ _HLOCK CH INPUT LCCKED CH TV CH 0 0 0 30 0 0 0 0 0 24 0 IS o_ _d3_ Press ENTER.
I b=U La iing° Ch 'annels • This feature allows you to enter a 4 letter channel identifier of your choice that will appear over the channel number display. The label can be anything you want (for example the station call letters). • The label you set will appear when you turn the TV on, select a channel, or press the RECALL button. PressMENU, then appears. press < or • until the SET UP menu Example: To assign "ABCD" to channel 4. Press • (or • ) until "CH LABEL" is highlighted.
Press • or • to select the first character for the label, then press ENTER. Letters of the alphabet, numbers and other graphic symbols are available for labeling. Each time you press the • or • button, the displayed ch, haracter will change in the following order. ,Fblank / • button p--* • button 0---_S _A--_Z [->-_+-->[ _1 ]-) +--I ]-_Z---_A--)9----)O_ Repeat stepcharacters.
Programming Channels ir_J_xr-_'_q ADVAN CE D OPERATION Your Favorite • The Favorite Channel Programming feature allows you to program up to 12 of your favorite channels. Once programmed, you can use FAV CH • / • on the Remote Control to scan through only your favorite channels, skipping other channels you do not normally view. Press MENU, then press • or • until the SET UP menu appears.
Note: Select menu, FAVORITE CH menu in the SET UP |FAVORITE FAV CH • / • will function only after you have programmed your favorite channels. CH INPUT _CH SETUP 7 11 18 CH0000 0000 TV km 0 Press < or • to select"Clear." IIFAVOR I TE CH :_1 Ot INPUT SET UP CH CH 7 O 0 11 0 0 18 0 0 0 0 0 TV CABLE Press ENTER. All the favorite channels you have programmed are cleared.
Flesh Tone/Noise Reduction ir_r_vx_l'_q A DVA N CED OPERATION Flesh Tone Function ENTER <_ _ v A 1 This function allows you to obtain natural flesh tones by correcting the difference of tint between "IV stations. Press MENU, menu then press < or • until the PICTURE appears, r RECALL_ MUTE_) Q®Q Q®® G®® Press • (or •) highlighted. until "FLESH TONE" is Press _ or • to select "On," ®®6 Noise Reduction Function This function allows you to reduce visible interference in your "IV picture.
_ ADVANCED OPERATION Changing the On-screen Display Language • You can choose from three different languages (English, French and Spanish) for the on-screen displays (adjustment menus and messages). ENTER < > !f!t _ ^ )1 Press MENU, then appears, press • or • until the SET UP menu LANGUAGE TV/CAaLE O'1 PROGRAM AOD/ERASE TIMER / CLOCK Press • (or • ) until "LANGUAGE" is highlighted, R_ M_ POWER @®® G®® ®®® Press • or • to select the language you want.
i Connecting External Equipment [_J_I_i'_CONNECTING OTHER EQUIPMENT • Refer also to the owner's manual of the equipment to be connected. • When connecting other equipment to the TV, first turn off all main power switches. "IV rear • o.
Connect the VIDEO 1 or VIDEO 2 IN jacks on the rear panel of the TV to the video/audio output jacks of the VCR, Laser Disc Player, video camera, etc. for playback of video recordings. Antenna/Cable TV See page 8 for details on Antenna/Cable TV connections. TV rear Antenna_ Antenna input output Audio , outputs' VCR Video output Video cable (Not su Audio cable To select the video input source Press W/VIDEO on the Remote Control or on the TV repeatedly to select the appropriate source.
I Connecting External Equipment CONNECTING OTHER EQUIPMENT ,continued) if you connect a VCR with an S-video jack to the "S-VIDEO" jack on the back of the TV, you must also connect the audio cables to the "VIDEO 1 IN" AUDIO jacks. The S-video cable supplies video signals only. Antenna/Cable "IV See page 8 for details on Antenna/Cable TV connections.
To connect equipment for dubbing/editing Connect the output jacks of the playback VCR to the input jacks (VIDEO 1 or VIDEO 2) on the TV. Connect the output jacks (VIDEO/AUDIO OUT) on the TV to the input jacks of the recording VCR. TV rear Vidoo I Audio output Playback VCR JVideo input Recording VCR Note: Do not connect one VCR to the output and input jacks on the "IV at the same time. To monitor dubbing/editing Turn on the TV and bothVCRs.
I Connecting External Equipment _CONNECTING OTHER EQUIPMENT (continued) This connection allows you to view pictures from a DVD video player, an advanced video/audio device. "iV rear DVD video player I ooo. ,, ,::_ Audio Y/CB/CR outputs outputs Video cables (not supplied) Y cable CBcebte CRcable Audio cable (not su To select the video input source Turn on the'IV and the DVD video player. Press on the Remote Control or on the "IV to W/VIDEO select "COLOR STREAM'.
Connect the VARIABLE AUDIO OUT jacks to the auxiliary input jacks on the stereo amplifier. You can control the audio signal going to the audio equipment using the Remote Control for this TV, "1_ rear AUX, input Stereo amplifier (not supplied) * The "fixed level" AUDIO OUT jacks are also available for connecting to an audio cassette recorder (or amplifier) to record audio from the TV. This constant audio signal is not affected by pressing the VOLUME buttons on the TV or the TV's Remote Control.
I Specifications ADDITIONAL REFERENCE-- TELEVISION SYSTEM NTSC standard CHANNELCOVERAGE VHF: 2 through 13 UHF: 14 through 69 Cable TV: Mid band (A-8 through A-l, A through I) Super band (J through W) Hyper band (AA through ZZ, AAA, BSB) Ultra band (65 through 94, 100 through 125) POWER SOURCE 120 VAC, 60 Hz POWER CONSUMPTION 171 W (average) AUDIO POWER 14W+14W SPEAKER TYPE Two 6-1/4 inches (16 cm) round VIDEO/AUDIO "i;ERMINALS S-VIDEO INPUT (VIDEO 1NIDEO 2) Y-INPUT: 1 V(p-p), 75 ohm, negativ
i Before Calling Service Personnel _ADDITIONAL REFERENCE • Before calling service personnel, please check the following cause of the problem ou are experiencing. chart for the possible • Make sure power cord is plugged in, then press POWER. 22 • Check the batteries in the Remote Control. If the batteries are dead, replace them with new ones. 11 • Check the antenna/cable connections. 6 _ Maybe the sound is muted. Press VOLUME •. Maybe there is stationtrouble. Try another Channel.
Limited United States Warranty I _ADDITIONAL REFERENCE Toshiba America Consumer Products, Inc. ("TACP') and Toshiba Hawaii Inc. ('THI") make the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
