Datasheet

TOSHIBA
TOSHIBA CORPORATION
1/4
CMOS DIGITAL INTEGRATED CIRCUIT TC4S66F
The information contained here is subject to change without notice.
The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic
equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equip-
ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types
of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
Bilateral Switch
TC4S66F contains one circuit of bidirectional switches.
When control input, CONT is set to “H” level, the impedance between input
and output of the switch becomes low and when it is set to “L” level, the switch
becomes high. This can be applied for switching of analog signals and digital
signals.
Features
ON-resistance (R
ON
)
- 300
(Typ.) . . . .V
DD
- V
SS
= 5V
- 110
(Typ.) . . . .V
DD
- V
SS
= 10V
-70
(Typ.) . . . . .V
DD
- V
SS
= 15V
OFF-Resistance (R
OFF
)
-R
OFF
(Typ.) > 10
9
Maximum Ratings
(Ta = 25
°
C)
Characteristics Symbol Condition Unit
DC Supply Voltage V
DD
V
SS
- 0.5 ~ V
SS
+ 20 V
Control Input Voltage V
IN
V
SS
- 0.5 ~ V
DD
+ 0.5 V
Switch I / O Voltage V
I / O
V
SS
- 0.5 ~ V
DD
+ 0.5 V
Power Dissipation P
D
200 mW
Potential difference across I / O
during ON
V
I
- V
O
±
0.5 V
Control Input Current I
C IN
±
10 mA
Operating Temperature Range T
opr
-40~85
°
C
Storage Temperature T
stg
-65~150
°
C
Lead Temperature (10s) T
L
260
°
C
Truth Table
* See static electrical characteristics.
Control
Impedance Between
In / Out - Out / In *
H 0.5 ~ 5 x 10
2
L >10
9

Summary of content (4 pages)