Introduction Preparations PORTABLE DVD PLAYER TV viewing SDP94DTWB Playback OWNER’S MANUAL Function Settings DIGITAL VIDEO Connections Other T PX1D00006760
Introduction SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION: This equipment employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.
Model No. Serial No. Retain this information for future reference. Introduction In the spaces provided below, record the Model and Serial No. located on the bottom of your DVD player. About disposal The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury. Please follow local ordinances or regulations when you dispose of the product.
Introduction SAFETY PRECAUTIONS Location of the required label The rating plate and the safety caution are on the bottom of the unit. In Conformity with the EEE Regulation Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste.
IMPORTANT SAFETY INSTRUCTIONS This unit is fully transistorized and does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7.
Introduction IMPORTANT SAFETY INSTRUCTIONS ADDITIONAL SAFETY INSTRUCTIONS 13. When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damaged. 19. Do not touch a spinning disc. When you open the disc holder, the disc may have not stopped spinning. Touching a spinning disc may cause personal injury or damage to the product. 14.
26. Use the player in a location that facilitates the immediate removal of the plug if there is a malfunction or failure. 27. Do not allow children to scratch, lick or put the memory card into their mouth. Keep the memory card out of the reach of children. Injury to the child or malfunction may result. 28. Should you ever notice a strange odor, smoke, or excessive heat coming from the player, remove the battery pack and AC adapter. Continued use in this state might cause fire, electric shock, or burns.
Introduction IMPORTANT SAFETY INSTRUCTIONS e) Never drive a nail into the battery pack. Never strike the battery pack with a hammer. Never step or tread on the battery pack. f) Keep the battery pack away from heat or fire. g) Never dispose of used battery packs with other ordinary solid wastes, since they contain toxic substances. Always dispose of used battery packs in accordance with community regulations that apply to the disposal of batteries.
d) Do not leave a dead or exhausted battery in the remote control. e) If you do not use the remote control for a long period of time, remove the battery to avoid possible damage from battery corrosion. 31. After unpacking coin-shaped batteries, store them in poly bags, etc. separately one by one when unused. If you leave them unwrapped, they may be short-circuited by contact with metal objects, resulting in battery leakage, heat or bursting. This may cause burns or injury.
Introduction IMPORTANT SAFETY INSTRUCTIONS d) This adapter is intended for exclusive use in automobiles/vehicles with a DC 12V negative ground electrical system. NEVER use this adapter with a DC 24V configured or a DC 12V positive ground electrical system automobile/vehicle. Consult your vehicle owner’s manual before using this adapter. e) When handling, using or storing the adapter power cord NEVER: - Place or locate near any apparatus that produces heat. - Disassemble, splice or extend the cord.
Introduction 35. The mains plug of the AC adapter is used as the disconnect device. Therefore use the AC adapter near the wall outlet so that the mains plug can be access easily at all times.
Introduction Precautions Notes on handling Notes on use in a vehicle Do not shock the LCD monitor. It may cause unit damage and malfunction. Do not use this product while driving. Neglecting this may cause a traffic accident. Do not use the player in a place subject to vibration. Neglecting this may cause malfunction of the player or damage to the disc. Never operate the player in a moving vehicle. Vibration may prevent proper playback of the player or cause damage to the disc.
Moisture condensation damages the player. Please read the following carefully. Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the player. Moisture condensation occurs during the following cases. When you transport the player directly from a cold place to a warm place.
Introduction Precautions (continued) About this owner’s manual This owner’s manual explains the basic instructions of this player. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the player may not respond to all operating commands. This is not a defect in the player. Refer to instruction notes of discs. “ ” may appear on the screen during operation. A “ ” means that the operation is not permitted by the player or the disc.
Table of contents Adjusting the volume of the speakers or the connected headphones ............................... 38 SAFETY PRECAUTIONS....................................... 2 Connecting to headphones ...................................38 IMPORTANT SAFETY INSTRUCTIONS................ 5 General adjustments .......................................... 39 Precautions ......................................................... 12 Adjusting the picture .............................................
Introduction Table of contents (continued) To operate EPG (Electronic Programme Guide) ...46 To customize channel lineup .................................47 Channel search options ........................................50 TV function settings ..............................................51 Playback Playing repeatedly .............................................. 65 Repeating a specific segment ...............................65 Repeating a title, chapter or track .........................
Viewing on a connected TV ............................... 86 Introduction Connections Viewing pictures from connected video equipment ................................................. 87 Connecting to an audio system equipped with analog audio inputs ................................... 88 Using the automobile/vehicle adapter or power port ........................................................... 89 Other Before calling service ........................................ 94 Specifications .................
Identification of controls Introduction Instructions and actual buttons Most instructions are based on remote control operation, unless otherwise noted. You can use the buttons on the remote control and those on the main unit as well when they have the same function. Some functions are available only from the remote control. Main unit See page in LCD monitor swivels 180 degrees around. for details.
Right side AV IN jack 87 Connect to AV output terminal of your video equipment Introduction Headphone jacks (× 2) 38 To connect headphones DC IN 12V jack 31 To connect the AC adapter (supplied) AV OUT jack 86 Connect to AV input terminal of your TV Left side ANT IN jack 42 To connect an aerial Card slot 73 To insert a memory card to play Front POWER indicator 36 To display the condition of the power (on/off/charge) Important • Magnets are incorporated inside the player to lock the LCD when closed
Identification of controls (continued) Introduction Remote control See page in TELETEXT button* 45 for details. 46 POWER button 36 EPG button* 46 TV/RADIO button 44 FAV(+/-) buttons* +10 button* FAVOURITE button* − REV button 62 FWD button 62 SLOW button* 62 SLOW button* 62 Direction buttons 40 60 SKIP buttons 63 / + (Volume) buttons 38 63 Number buttons 44 ENTER button 40 60 SET UP button 78 buttons 44 DISPLAY button 45 SHIFT button 71 E.A.M.
A-B REPEAT QUICK TV/RADIO +10 button + (Volume) FWD SLOW ENTER SET UP SHIFT E.A.M.
Introduction Accessories Supplied accessories. Remote control (SE-R0353) Coin-shaped battery (CR2025) Audio/video cable AC adapter (EADP-18SB D)* Battery pack (SD-PBP94E)* Headphones Carrying case Vehicle adapter (MEDC01AX)* Outdoor aerial (RF adapter x1) Use this for carrying, etc. of the player. Owner’s manual * 22 Do not use an AC adapter, a battery pack and a vehicle adapter other than one specified. Also, do not use these supplied accessories with any device other than this player.
Notes and Information Introduction Playable discs This player can play the following discs. Disc Disc Mark DVD Video disc Disc Size DN DN Contents r 7JEFP NPWJOH QJDUVSFT "VEJP DVD-RW DN r 7JEFP "VEJP %7% 73 GPSNBU DPNQBUJCMF XJUI $13. %7% WJEFP GPSNBU 'JOBMJ[FE EJTDT POMZ r "VEJP .1 GJMFT r .PWJF %JW9 r 1IPUPHSBQI +1&( GJMFT DVD-R DN r 7JEFP "VEJP %7% 73 GPSNBU DPNQBUJCMF XJUI $13. %7% WJEFP GPSNBU 'JOBMJ[FE EJTDT POMZ r "VEJP .1 GJMFT r .
Introduction Notes and Information (continued) 24 Notes • You cannot play discs other than those listed above. • You cannot play DVD-RAM discs or non-standardized discs, etc., even if they may be labeled as above. • The colour system of DVD video disc this player supports is PAL/NTSC, and the player cannot play DVD video discs recorded in any other colour system (SECAM, etc.).
Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping. Do not touch the playback side of the disc. Playback side Do not attach paper or tape to discs. On cleaning discs Fingerprints and dust on the disc may cause picture and sound deterioration. Wipe the disc from the centre outwards with a soft cloth. Always keep the disc clean.
Introduction Notes and Information (continued) Playable memory cards Card Card Mark Notes on memory cards Contents SD Memory Card • Audio (MP3) • Photograph (JPEG) Some memory cards may not be played back due to its capacity and/or manufacturer, etc. Do not insert any memory card other than those memory cards referred to left. Failure to follow this instruction may cause a malfunction of the player and/or card. SDHC Memory Card • SD is a trademark. • SDHC is a trademark.
Write Protection of SD Memory Card Switch the write protect tab at the side of the card to “LOCK”. LOCK Write protection tab Introduction Notices for use Ensure that you insert the memory card correctly into this player. Do not eject the memory card while it is in use. If ejected while in use, information on the memory card may be lost. This memory card is a precision electrical instrument. Do not bend, drop or apply strong pressure to it.
Preparations Preparations before using.
Preparation of the remote control Preparations Insert the specified battery to the remote control. See page 8 for safe use of coin-shaped batteries. 1 Gently insert a fingernail in groove 1 Operating with the remote control Point the remote control at the remote sensor and press the buttons. and pull out the holder in direction 2 . Backside 1 Within about 3 m (9.9 feet) 2 Take care not to break your fingernail. battery (CR2025) with the 㧗 side up on the holder.
Power connection Connect the supplied AC adapter to wall outlet as below. 1 To the DC IN 12V jack Preparations Follow steps 1 to 2 to connect. When disconnecting, reverse this order. CAUTION • Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire or electric shock. • Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock.
Using the battery pack Preparations The supplied battery pack (lithium ion battery pack) can power where AC adapter is unavailable. WARNING • Do not use a battery pack other than one specified as it can result in a fire or damage to the unit. • Do not heat, open, or short-circuit the battery pack. Do not throw the battery pack into a fire. Doing so may cause an explosion or a fire. • Attach the battery pack properly following the explanation below.
Important • Detach the battery pack from the player after being used. Charging the battery pack The battery pack needs to be charged before use. (The battery indicator is shown on the screen when the power in the battery pack is running low.) Perform a full charge before the first use. Charging time of a battery pack Preparations Notes • It is possible to leave the battery pack attached while powering the player with the AC adapter.
Using the battery pack (continued) Detaching the battery pack Preparations 1 Turn the player off. 2 Disconnect all cables and cords from the player. 3 Turn the player upside down. 4 While holding the lock switch, slide the battery Important • After detaching the battery pack, be sure to attach the battery cover in order to avoid a short-circuiting which may be caused by contact with metal objects to the connector. • Do not detach the battery pack while the POWER indicator illuminates in green or orange.
To turn the LCD monitor You can turn the LCD monitor 180 degrees. To turn the LCD monitor 4 Adjust the angle of the LCD monitor. The LCD monitor can be laid flat. Preparations 1 Put the player on a level place. 2 Open up the LCD monitor vertically. 3 While holding the lower side of the player, turn the LCD monitor slowly 180 degrees to the direction of “TURN” until it clicks. To put back the LCD monitor 1 Open up the LCD monitor vertically.
Powering on/off Preparations Press POWER. The POWER button and the POWER indicator illuminate. To turn off the power, press POWER again. POWER button The indicator illuminates when the power is on. POWER indicator 36 Important • When you use this player for the first time, before powering, be sure to open the disc cover by pressing the OPEN button on the main unit and remove the protective sheet.
Changing modes You can enjoy various contents of discs, the digital TV and other external equipment by changing the mode. Change it depending on your needs. 3 Press ENTER. The player enters the selected mode. 2 Press / to select the mode. Select when you want to watch the digital TV broadcasting. Notes • Make sure that DVD/CD is selected when you play a disc. Cannot be played any discs other than DVD/CD mode. • This operation is not available when the AV OUT jack is connected.
Adjusting the volume of the speakers or the connected headphones 1 Press and hold Vol (+/–) on the main unit. You can connect headphones to the headphone jack using a stereo mini plug. or Preparations Connecting to headphones Press (press and hold) +/– on the remote control. Vol + : Increase volume. Vol – : Decrease volume. Stereo mini plug ( 3.5mm) Connect either of these jacks. Headphones Maximum output voltage ≤ 150mV • Before connecting, temporarily turn down the volume.
General adjustments Adjusting the picture 1 Press PICTURE. A picture adjustment menu appears. e.g. P ICTURE P ICTURE MENU STANDARD 50 BRIGHTNESS 50 CONTRAST HIGH BACK L IGHT 00 COLOR 00 T I NT 00 SHARPNESS AUTO P I CTURE SIZE RESET PICTURE MENU Parameter / to change To apply standard settings. (Only STANDARD PICTURE SIZE can be changed.) MEMORY To adjust the picture using the items listed below.
General adjustments (continued) Preparations Using “QUICK MENU” When you want to change settings, open “QUICK MENU”, a list of functions which are available in the current mode. It can be operated in the same manner in any mode. 1 Press QUICK. “QUICK MENU” appears. The contents may vary depending on the mode. e.g. QUICK MENU MENU P I CTURE 2 Press / to select an item, then press ENTER. 3 Set the details.
TV viewing You can view TV programmes on this player.
Antenna connection When poor broadcast reception due to inclement weather or other reasons, the picture or sound may be affected and video noise or audio noise may occur. Also depending on your location, the broadcast reception signal may fail. TV viewing The tip of the outdoor aerial is sharp and can inflict injury such as puncture wounds. Be careful when handling it. Outdoors aerial (supplied) Aerial cable (not supplied) Connect either. CAUTION • Keep the supplied outdoor leads away from children.
Initial settings When you first turn on this player the following menu appears. From this menu, make the initial settings. 5 Press to select “Yes”, then press ENTER. Init Install OSD Language Area English England English Gaelic Welsh Channel search starts. To cancel the process, press RETURN. When complete, a current TV programme appears. TV viewing Go to “Selecting channels” 44 . 1 Press and / to select a language for on-screen displays, then press ENTER. 2 Press .
Operation • Press ENTER to display “QUICK SELECT”. Preparation TV viewing Follow the steps on page 37 to select TV/SD-V mode. The player enters TV/SD-V mode. Whenever you view TV on this player, select this mode. e.g. QUICK SELECT None S.No 0001 0002 0003 0004 0005 0006 Channel Name BBC ONE BBC TWO BBC THREE BBC NEWS 24 BBCi CBBC Channel Selecting channels 1 Press TV/RADIO to switch TV channels and radio channels. 2 Select channels. Select the group by then press ENTER.
Viewing information Help information While you are using an on-screen display (e.g. “QUICK SELECT” menu), you can access help information by pressing DISPLAY. e.g. TV To view the channels from TV & Radio To select the group Information changes in the following order. Channel name and programme name (Disappears in the specific seconds 52 .
Operation (continued) Using teletext Selecting audio language If the selected TV channel has teletext features, you can access them. TV viewing 1 Press TELETEXT while pressing SHIFT. 2 Enter 3 digits of a page number. or Press / ( hundred). / to change by one 1 Press AUDIO. 2 Press / / / to select a language, then press ENTER. To operate EPG (Electronic Programme Guide) 1 Press EPG while pressing SHIFT. 3 To close, press TELETEXT while pressing SHIFT.
“Channel Organizer” menu To customize channel lineup Once channel search 43 is finished, you can change channel lineup to your preference. Open the necessary menu in the following procedure. e.g. Channel Organizer S.No 0001 0002 0003 0004 0005 0006 Channel name BBC ONE BBC TWO BBC THREE BBC NEWS 24 BBCi CBBC Channel Fav Mov Lock Del 1 In TV/SD-V mode, press MENU. “Channel Manager” menu appears. 3 Press / to select “Channel Organizer”, then press ENTER. “Channel Organizer” menu appears.
Operation (continued) Locking the channel 1) On “Channel Organizer” menu, press select a channel. Sorting channels / to 2) Press the blue button. TV viewing 3) Enter your 4-digit password (0000 for the first time). A mark “ ” appears. To unlock the channel, put out the mark by pressing the blue button at step 2). Deleting the channel 1) On “Channel Organizer” menu, press select a channel. 2) Press the green button. A mark “ ” appears. The channel is deleted.
Saving a channel as a new one Editing a channel 1) On “Channel Manager” menu, select “Edit Channels”, then press ENTER. 1) On “Channel Manager” menu, select “Edit Channels”, then press ENTER. 2) Select a channel by / . 2) Select a channel by / 3) Press the yellow button. 4) Change the details, if necessary. 4) Change the details. Area Name: Press and / , then ENTER. Carrier: Press / . Channel Name: Press / . Enter a new name. Number buttons: To input a letter. Red: To switch number and alphabet.
Operation (continued) Channel search options Redo channel search in the following procedures whenever you need. TV viewing 1 In TV/SD-V mode, press MENU. 2 Press / to select “Installation”, then press ENTER. 3 Confirm “Area Search” is selected, press ENTER. Channel search starts. Searching a specific channel If you know the frequency of a channel you need, you can save the searching time by specifying the frequency. 1) Perform steps 1 to 2.
TV function settings Main Menu 1 In TV/SD-V mode, press MENU. Channel Manager Installation Configuration / to select “Configuration”, then press ENTER. 3 Press / to select the category, then press ENTER. Factory Default Version Configuration OSD OSD TV System Setup 4 Press / to select the item. 5 Change the selection by / / / or other buttons, by referring to the corresponding pages ( 52 -), then press ENTER. Setting in TV/SD-V mode are all reset. Enter your 4-digit password.
Operation (continued) OSD OSD Language Language for on-screen displays OSD English / Gaelic / Welsh Theme colour of on-screen displays TV viewing Theme1 / Theme2 / Theme3 / Theme4 / Theme5 Press / . OSD Timeout Time length of on-screen displays 1 / 2 / 3 / 4 / 5 / 6 (second): Press / . OSD Trans Transparency of on-screen displays 0% / 10% / 20% / 30% / 40% / 50% / 60% Press 52 / . 1 Press and / 2 Press ENTER. .
TV HUE Hue of pictures in TV/SD-V mode -6 / -5 / -4 / -3 / -2 / -1 / 0 / 1 / 2 / 3 / 4 / 5 / 6 Brightness Brightness of pictures in TV/SD-V mode 1 Press and / 2 Press ENTER. . . Saturation Saturation of pictures in TV/SD-V mode 0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 Contrast Contrast of pictures in TV/SD-V mode 1 Press and / 2 Press ENTER. TV viewing 0% / 10% / 20% / 30% / 40% / 50% / 60% / 70% / 80% / 90% / 100% 1 Press and / 2 Press ENTER. .
Operation (continued) System Setup EQ Setup TV viewing Sound effect to audio in TV/SD-V mode Standard / Classic / Rock / Jazz / POP Press / . Surround Surround effect to audio in TV/SD-V mode OFF / Concert / Church / Passive / Live Press / . Note • You cannot set both “EQ Setup” and “Surround”. Selecting the effect of one disables the other’s. LCN Channel searching/sorting by LCN data OFF / ON 54 Press / .
Time GMT Offset Timer Mode Timer setting method Auto / Manual / -12:00 - +12:00 / Auto 1 Press and / 2 Press ENTER. . Summer Time (If “GMT Offset” is not set to “Auto”) . OFF: No clock adjustment for summer time. Date (If “Timer Mode” is set to “Manual”) 1 Press / to open a calendar. 2 Press / / / to select a day. 3 Press ENTER. Time ON: One hour advances in summer months. Press / TV viewing Press (If “Timer Mode” is set to “Auto”) .
Operation (continued) Parental Lock Set your password, which enables you to unlock TV channel restriction and system reset to default. TV viewing Parental Lock Enter Old Password Enter New Password Confim New Password Enter password 1 Press the number buttons to enter your old password (“0000” for the first time). 2 Press the number buttons to enter your new 4-digit password. 3 Press the number buttons to enter the same digits again.
Playback Play your favorite disc.
Loading a disc For disc compatibility information, see page 23 . 1 Open the LCD monitor. 4 Close the disc cover. Press CLOSE. To remove the disc Press OPEN on the main unit to open the disc cover and remove the disc from under the rim while gently pressing down on its centre. Playback 2 Press OPEN on the main unit. The disc cover opens. Before using the player for the first time, remove the protective sheet beneath the disc cover. 3 Set a disc.
Playing a disc DVD-V VCD The following icons are used in this manual to indicate features and/or functions that are applicable to each disc. CD DVD-V : DVD Video disc Preparations • • : Audio CD The player memorizes the location where playback is stopped and resumes playback from the location where you stopped. 37 to select DVD/CD mode. 2 Press PLAY. If you select a DVD video disc that contains a top menu, or select a PBC (Playback Control)-featured VIDEO CD, a menu may appear.
Playing a disc (continued) Pausing playback (Still mode) Press PAUSE/STEP during playback. The picture gets still and sound is muted. To resume normal playback, press PLAY. Using the top menu DVD-V VCD CD 1 Press TOP MENU. e.g. 1 2 3 4 The top menu appears. 2 Press / / / to select the title you want. Playback If the titles in the top menu are assigned a number, you can select the title by pressing the number buttons. 3 Press ENTER. Playback starts from chapter 1 of the selected title.
About the screen saver If 20 minutes elapse while the power is on and there is no disc in the player or while the disc is stopped, the screen saver is automatically displayed (when “Screen saver” (refer to “Function Settings”) is set to “On” ). To turn off the screen saver, press any button on the main unit or remote control.
Changing playback speed Playing in fast reverse or fast forward DVD-V VCD CD Press REV or FWD on the remote control during playback. REV : Fast reverse playback FWD : Fast forward playback Playback Each time you press the REV or FWD button, the playback speed changes. DVD-V VCD CD Press PAUSE/STEP repeatedly during playback. The sound is muted during frame by frame playback. Press PLAY to resume normal playback. Playing in slow-motion DVD-V VCD CD Press PLAY to resume normal playback.
Playing a desired scene DVD-V VCD CD Skipping chapters or tracks 2 Press 1 Press SKIP ( / ) repeatedly to locate the chapter or track you want. Playback starts from the selected chapter or track. : Playback starts from the beginning of the next chapter or track. Category To search by specifying: Title* Title number Chapter* Chapter number Track Track number Time Elapsed time of the current track Disc Time Elapsed time in the entire disc *: Not available in CD playback.
Playing a desired scene (continued) Notes • Pressing the CLEAR button resets the numbers. • Some discs may not respond to this process. • Some scenes may not be located precisely as you specified. Bookmark function Playback 1 During playback, press T repeatedly to display “Bookmark”. Chapter Time Bookmark Bookmark 1 Bookmark 2 Bookmark 3 3 Press / to select a bookmark (1, 2, 3) to register, then press ENTER. To cancel the procedure, press T to turn the display off.
Playing in random order Playing repeatedly DVD-V DVD-V VCD CD 1 During playback, press RANDOM to display “Shuffle On” on the screen. VCD CD Repeating a specific segment 1 Press A-B REPEAT at the beginning of Each time you press the button, the random mode “Shuffle On” and “Shuffle off” alternate. the segment (point A) you want to play repeatedly. The mode on the screen will disappear in a few seconds if not operated. “Rep A-” appears.
Playing repeatedly (continued) Repeating a title, chapter or track 1 During playback, press REPEAT repeatedly to select the repeat mode. Each time you press the button, the repeat mode changes on the screen. Playback The mode on the screen will disappear in a few seconds if not operated. Repeat playback starts after finishing the current chapter or track.
Playing in a favorite order DVD-V VCD CD 1 During stop, press MEMORY. 3 Press to select “ Play” then press The programming display appears. ENTER. e.g. DVD-V The player starts memory playback. T C Program Play 1 2 3 Enter a track number when using a VIDEO CD. Clear program Title Chapter • Select a number to cancel, then press CLEAR. • Select “Clear program” on the screen and press ENTER. All of the programmed selections are cleared. order you wish to play.
Zooming a picture DVD-V VCD CD To resume normal playback 1 Press ZOOM during playback. Press ZOOM repeatedly until “Off” appears. The zoom icon appears. This operation is available also during slow, still, fast forward or fast reverse playback. x2 2 Select the zoom point and magnification Playback level. • Magnification level: Press ZOOM repeatedly.
Changing the camera angle Selecting subtitles DVD-V DVD-V VCD CD 1 Press ANGLE while playing a scene recorded with multiple camera angles. The angle icon ( ) appears on the screen. e.g. VCD CD 1 Press SUBTITLE during playback. The current subtitle setting is displayed. 2 Press SUBTITLE while the subtitle setting is displayed on the screen.
Selecting audio formats Good morning! DVD-V VCD Bonjour! ¡Buenos días! CD 1 Press AUDIO during playback. The current audio setting is displayed. Selecting sound channels of VIDEO CDs During playback, press AUDIO repeatedly to select the sound channel. e.g. 1/3 D 3/2.1 Ch Eng Sound recording Audio language system Playback 2 Press AUDIO while the audio setting is 70 displayed on the screen.
Selecting enhancement modes On-screen display mode DVD-V DVD-V VCD CD 1 Press E.A.M.* The current sound enhancement setting appears. * E.A.M. = Enhanced Audio Mode VCD CD 1 Press DISPLAY during playback. The current instructional information appears. e.g.: DVD video disc Elapsed time of the current title 2 Press E.A.M. repeatedly. • 3D Off Normal sound. Note • Actual effects to sounds may vary depending on the disc.
Playing audio/video/picture files You can play audio CDs, MP3 (audio), DivX® (video) or JPEG (picture) files on this player. MP3 or DivX® compatibility Playable media (MP3) Playable media (DivX) Sampling Frequency Bit rate Playback CD physical format File system File name Total number of files DivX codec version DivX resolution CD-ROM, CD-R, CD-RW, DVD-R, DVD-RW, SD Memory Card, SDHC Memory Card CD-ROM, CD-R, CD-RW, DVD-R, DVD-RW 32 kHz, 44.
How to use a memory card 2 Follow the steps on page 37 to select “SDCARD” mode. 2 Note • Do not eject the memory card while it is in use. If ejected while in use, information on the memory card may be lost. 1 1 Insert a media you want to play. The menu appears. e.g. 1/8 /Track01.CDA Repeat Track02 Mode : Off Edit Mode Track04 Track05 Music Playing Track07 Track08 2 Select the track/file you want to play / 1 Select “Filter” using ENTER. / / / then press The screen appears as below.
Playing audio/video/picture files (continued) Playing repeatedly Select “Repeat” on the screen using during playback then press ENTER. / / / Playback Each time you press ENTER, the repeat mode changes. Off: Resumes to normal playback. Single: Repeats current track. All: Folder: Repeats all tracks in order. (Audio CD) Repeats current folder. (MP3) / / Each time you press ENTER, the playback mode changes. Normal: Resumes to normal playback. Shuffle On: Plays in random order.
Playing in a favorite order To display recorded track/file You can combine your favorite track/file and play in the order you determine. Select “Browser view” on the screen then press ENTER. 1 Select “Edit mode” on the screen using / / / then press ENTER. The track/file list of the media appears. 2 Position the cursor using displayed track/file. To cancel the programmed selections to the screen The check mark ( track/file.
Function Settings You can change the default settings to customize to your preferences.
Customizing function settings DVD-V VCD CD 1 During stop, press SET UP. 4 Change the selection by / or other buttons, by referring to the corresponding pages 80 , then press ENTER. The setting menu appears. 2 Press / to select the icon of the setting (listed below) to change, then press . To change other settings, press 2 to 4. 3 Press Function Settings / to select the setting you want to change, then press ENTER. Icon Language Setting OSD Menu 5 Press SET UP.
Video Audio Rating DVD-V VCD CD View Mode DVD-V VCD CD E.A.M. DVD-V VCD CD You can easily switch to a preferred audio enhancement. (E.A.M. = Enhanced Audio Mode) D.R.C. DVD-V VCD CD To turn on or off a function that makes faint sounds easier to hear even if you lower the volume during late hours playback. (D.R.C. = Dynamic Range Control) Parental control DVD-V VCD CD To set the level of the parental lock.
Customizing function settings (continued) Language OSD Menu Audio Function Settings 80 VCD CD Preferred language for the sound track. DVD-V VCD CD To view on-screen displays in English. English: To view on-screen displays in French. Français: To view on-screen displays in Spanish. Español: To view on-screen displays in German. Deutsch: Nederlands: To view on-screen displays in Dutch. To view on-screen displays in Swedish. Svenska: To view on-screen displays in Turkish.
DivX subtitle Select the appropriate language so that DivX subtitles are displayed properly. ASCII : Unicode : Western European : Turkish : Central European : Greek Video Aspect Ratio DVD-V VCD CD 4:3 : Select when a standard 4:3 TV is connected. 16:9 : Select when a 16:9 wide TV is connected. View Mode DVD-V VCD CD Fill: Pictures are expanded horizontally and vertically to fit the shape of the screen. No picture cropping. Original: Pictures are displayed in their original aspect ratios.
Customizing function settings (continued) Audio E.A.M. Rating DVD-V VCD CD Normal: Normal sound. 3D: To obtain expansive virtual surround sound effects from just two speakers. Note • Pressing the E.A.M. button on the remote control also allows you to achieve the same setup. Function Settings D.R.C. 82 DVD-V VCD CD Parental control DVD-V VCD CD DVD video discs equipped with the parental lock function are rated according to their content.
3 Confirm “Set Password” is selected, and press ENTER. Another input area appears. 4 Press / to select the parental level to set and then press ENTER. 4 Press the number buttons to enter a new code, then press ENTER. 5 Enter the same code again, then press ENTER. The new security code is set. Note • If you have forgotten your security code, enter 99999 at step 2 and set a new security code.
Customizing function settings (continued) Default Default No: To not restore the function settings to their default settings. Yes: To restore the function settings to their default settings. DivX Registration Function Settings The DivX information appears. 84 Return to “Default” if you press ENTER while it is displayed.
Connections You can connect the player to a TV or audio system.
Viewing on a connected TV 1 Follow the steps on page 37 to select a mode. (Except for TV/SD-V. Pictures in TV/SD-V mode cannot be output to connected equipment.) 2 Connect a TV to the AV OUT jack of this Connections player. Signal flow To AV OUT Connection to To video input this jack Yellow (Video) VIDEO IN disables the LCD of the player.
Viewing pictures from connected video equipment You can use the LCD of this player to monitor pictures of connected video equipment. 1 Connect video equipment to the AV IN jack of this player. 37 to select AV IN mode. The player is ready to display pictures of the connected equipment on the LCD. (AV input mode) Yellow (Video) Video equipment White (Left) Connections Notes • Signals input from the AV IN jack may not be displayed in their original picture sizes on the LCD of this player.
Connecting to an audio system equipped with analog audio inputs 1 Follow the steps on page 37 to select a mode. (Except for TV/SD-V. Pictures in TV/SD-V mode cannot be output to connected equipment.) 2 Connect an audio system equipment to Connections the AV OUT jack of this player. Signal flow To AV OUT To analog audio inputs Red (Right) AUDIO IN R L White (Left) Audio/video cable (supplied) Yellow (Video) No need to connect.
Using the automobile/vehicle adapter or power port For use of the DVD player in a car, this adapter can power the DVD player from the cigarette lighter socket. 1 ON 2 3 Off 4 Connections WARNING • NEVER place a DVD player within the eyesight of a driver while he/she is driving an automobile/vehicle. Note: A DVD player located in the front seating section of a vehicle is illegal in many jurisdictions.
Using the automobile/vehicle adapter or power port (continued) Connections 1 Be sure to turn off the DVD player then remove the battery pack from the player. (Note: Charging the battery pack with the vehicle adapter may cause smoke, fire or electrical shock to human body. ALWAYS remove the battery pack before using the vehicle adapter.) 2 Turn on the vehicle engine so that the cigarette lighter socket or power port is powered.
Connections • Avoid dropping the adapter or placing heavy objects on it. Never use the damaged adapter. • Do not pull the adapter power cord when removing it from a socket or power port. Always grasp and pull the body. Failure to do so could cause damage to and malfunction of the adapter. • Do not operate the DVD player using the adapter for a prolonged period with the car engine off. The car battery may be too exhausted to turn the engine on.
Other Useful information.
Before calling service Check the following guide for the possible cause of a problem before contacting service. Other Symptom No power. 94 Cause • The AC adapter is disconnected. • The battery pack has been removed. • Battery empty. The battery cannot be charged. • The battery is near full charge. The LCD turned off by itself. • The automatic LCD off function turned the LCD off. No TV channels. • The aerial is not connected. No TV channels after moving. • Channel search is not finished.
Symptom The playback picture has occasional distortion. Cause • The disc is dirty. • Player is in fast forward or fast reverse mode. • The player was moved or given a shock. Correction • Eject the disc and clean it. • Sometimes a small amount of picture distortion may appear. This is not a malfunction. • Vibrating or shaking the player during playback may produce distortion. This is not a malfunction. If not restored to usual status, stop playback and start again. • Remove the disc and set it again.
Before calling service (continued) Symptom Buttons do not work. Other The remote control does not work properly. 96 Cause • Power supply fluctuations or other abnormalities such as static electricity may interrupt correct operation. • The remote control is not pointed at the remote sensor of the player. • The remote control is too far from the player. • The batteries in the remote control are exhausted.
Specifications Player Power supply DC 12 V (Rated current : 1.5 A (Maximum: during battery pack charging)) 100 – 240 V AC, 50/60 Hz (with the supplied AC adapter) Mass Approximately 1.2 kg External dimensions (envelope) 260 × 35 × 191 mm (W/H/D) Signal system PAL/3.58NTSC Laser Semiconductor laser, wavelength 650 nm / 795 nm Operating conditions Temperature: 5°C to 35°C (41°F to 95°F) Operation status: Horizontal Connectors AV output (AV OUT) ø3.5mm mini jack × 1 Video: 1.0 V (p-p), 75Ω, negative sync.
Specifications (continued) Liquid crystal display Panel size 22.71 cm (9 inches diagonally measured) Projection system TN colour transmission Driving system Amorphous silicon TFT active matrix Resolution 640 (H) × 234 (V) pixels (effective pixel rate : more than 99.99%) Supplied accessories Audio/video cable ............................................................. 1 Remote control (SE-R0353) ............................................. 1 Coin-shaped battery (CR2025)..................................
Customer Helpline (This is only for U.K. customers.) Should you experience any problems during the installation of this product or within the first 12 months of purchase* please call the Toshiba Customer Helpline on 08448560730. To assist the Helpline when contacting them please have available. The Owners manual supplied with the Product, The Model Number, The Serial Number (generally on the bottom of the unit), A pen.
© 2010 Toshiba Corporation Printed in China
