Introduction Connections DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER SD-V594SC OWNER’S MANUAL This device does not tape-record copy protected DVD Video Discs.
Introduction SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFEGUARDS Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
Introduction IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14.
IMPORTANT SAFEGUARDS / Power source Introduction 19. REPLACEMENT PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 20.
Introduction Precautions Notes on handling When shipping the DVD/VCR, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD/VCR. Do not leave rubber or plastic products to contact the DVD/VCR for a prolonged period. They will leave marks on the finish. The top and rear panels of the DVD/VCR may become warm after a long period of use.
Notes and Informations On handling discs Playable discs This DVD/VCR can play the following discs. Disc Mark Contents Disc Size Approx. 4 hours (single sided disc) Playback side 12 cm Do not attach paper or tape to discs. Approx. 160 minutes (double sided disc) Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.
Introduction Notes and Informations (Continued) Notes on region numbers The region number of this DVD/VCR is 1. If region numbers, which stand for their playable area, are printed on your DVD video disc and you do not find 1 or ALL , disc playback will not be allowed by the player. (In this case, the DVD/VCR will display a message on-screen.) On Video CDs This DVD/VCR supports Video CDs equipped with the PBC (Version 2.0) function. (PBC is the abbreviation of Playback Control.
Contents Basic playback (DVD) SAFETY PRECAUTIONS ................................ 2 IMPORTANT SAFEGUARDS .......................... 3 Power source ................................................... 5 Precautions ...................................................... 6 Notes and Informations .................................... 7 Contents. .......................................................... 9 Identification of controls ................................. 10 Multi brand remote control .................
Introduction Identification of controls See the page in for details.
Display window Play indicator Still indicator DVD disc inserted indicator Recording indicator (VCR) Introduction VCR indicator (VCR) CD inserted indicator Multifunctional indicator Track indicator (CD) Tape loaded indicator (VCR) Progressive indicator AM/PM indicator (AM is not displayed) Timer Recording indicator (VCR) VCR operation status Press CALL to display VCR operation status on the screen. To cancel the display, press CALL again.
Introduction Identification of controls (Continued) The instructions in this manual describe the functions on the remote control. See the page in for details.
Introduction Inserting batteries 1 Open the battery compartment cover in the direction of the arrow. 2 Install two “AAA” batteries (supplied), paying attention to the polarity diagram in the battery compartment. 3 Replace the compartment cover. Caution: Never throw batteries into a fire. Notes: • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind.
Introduction POWER TV 0–9 100 DISPLAY INPUT SELECT PROGRAM VOL +/– ENTER ? CH M/? Multi brand remote control This remote control can be compatible with various brands of TV/ Cable box/DSS® satellite receiver by setting their control codes. The TOSHIBA code has initially been set to control TOSHIBA TVs. Setting TV control codes 1 2 Press TV to set the remote control operating your TV.
Setting Cable box/DSS® satellite receiver control codes 1 Press CABLE BOX to set the remote control operating your Cable box/DSS® satellite receiver. Table of Cable box brand codes Brand name of your cable box Toshiba Anvision 2 While holding down PROGRAM, enter the two digits of your Cable box/DSS® satellite receiver brand code (listed on the right) using Number buttons (0–9), then release PROGRAM.
Connections Antenna connections If you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip ahead to page for the proper connections. & Antenna to DVD/VCR connection The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna system to a DVD/VCR.
DVD/VCR to TV connection After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram. This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
Connections Cable TV connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those premium channels which are intentionally scrambled. If you subscribe to a premium channel which is scrambled, you must have a descrambler box for proper reception.
IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.
Connections Connecting to a TV Connect the DVD/VCR to your TV. Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you to connect the S-video or ColorStream® component video outputs to your TV/monitor also. Basic connection Signal flow (yellow) (red) To wall outlet To VIDEO OUT (white) To ANALOG AUDIO OUT Audio/video cable (supplied) To audio inputs To video input (yellow) (red) (white) • Make sure following setting.
S-video output An S-Video connection is superior to Video (Yellow) output. Use this method for DVD playback when the connected television has SVideo input, and does not have component video inputs. Component video outputs Connecting to an audio system and TV equipped with S-video input/component video inputs Connections PROGRESSIVE outputs Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal.
Connections Connecting to a TV (Continued) About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays.
Connections The content of the output for each output jack are as shown in the following table and differ depending on User settings/operation.
Connections Connecting to an audio equipment You can enjoy high quality dynamic sounds of DVD video discs or audio CDs by connecting the DVD/VCR to optional audio equipment. For connection to your TV, see “Connecting to a TV” . • This selection uses the following reference mark.
Warning When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/ R) jacks of the DVD/VCR are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) wires dangling.) To enjoy DTS Digital Surround™ playback, an external 5.
Connections Connecting to a USB Mass Storage This unit can be used to read JPEG, WMA, MP3 and DivX® data for any memory card reader/writer or digital camera that accepts USB Mass Storage Class. For devices that are compatible with the unit’s USB port, please refer to page 8 .
Basic setup (VCR) POWER DVD/VCR 3 4 Setting the video channel When a TV is connected with the 75 ohm coaxial cable only. To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel). TV/VCR DVD/VCR SELECT Setting the video channel Press DVD/VCR to operate the DVD/VCR. 2 Press and hold 3 or 4 on the remote for 3 seconds in standby mode.
Basic setup (VCR) DVD/VCR Setting the language You can choose from three different languages (English, French and Spanish) for the on-screen display. ENTER SET +/– VCR MENU DVD/VCR SELECT Setting the language Preparation: • Turn ON the TV and select to the corresponding video input. • Press DVD/VCR to operate the DVD/VCR. • Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light.) 1 4 Press VCR MENU until the menu screen is cleared. Press VCR MENU. The VCR menu screen will appear.
POWER DVD/VCR Clock setting The AUTO CLOCK function will automatically set the built-in clock (Month, Day, Year and Time) when the DVD/VCR is connected to an Antenna or Cable system and it is turned off. The DVD/VCR searches for a station in your area containing the necessary AUTO CLOCK setting signals. Once received, it will take approximately 4 minutes for the clock to set itself automatically.
Basic setup (VCR) Clock setting (Continued) To set STANDARD TIME To set DAYLIGHT SAVING TIME In the rare event that you live within broadcast range of two You can set the DAYLIGHT SAVING TIME automatically or stations in two different time zones, the DVD/VCR may recognize manually. the wrong station for the AUTO CLOCK setting. To correct the situation: 1 Press VCR MENU. 1 Press VCR MENU.
SET +/– ENTER CANCEL If the AUTO CLOCK process did not set the date and time correctly, you must set them manually for timer recording and DAYLIGHT SAVING TIME. VCR MENU Manual clock setting 1 Press VCR MENU. 2 Press SET + or – to select “SYSTEM SETUP”, then press ENTER. After setting the clock, date and time starts functioning automatically.
Basic setup (VCR) DVD/VCR Tuner setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE menu option to the TV mode.
0–9 ENTER SET +/– VCR MENU To ADD/DELETE channels Repeat the step 1 on page ! . Then press SET + or – to select the “ADD/DELETE” and press ENTER. CH SETUP When you don't want to receive a weak signal broadcast, a Blue back screen can be obtained by selecting the NO NOISE BACKGROUND to “ON”. When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to “ON”. 1 TV CABLE AUTO CH MEMORY ADD/DELETE Repeat the steps 1~2 on page ! and press SET + or – to select “NO NOISE BACKGROUND”.
Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked . EJECT Loading Push the center of the tape until it is automatically inserted. Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. Erase prevention tab Automatic power ON When you insert a cassette tape, the DVD/VCR power will turn ON automatically.
DVD/VCR Cassette tape playback To play a prerecorded tape. STOP PLAY FWD REV DVD/VCR SELECT Playback Rewind or forward the tape Preparation: 1 Stop the playback or recording via STOP on remote control. To rewind the tape: Press REV. Playback (VCR) • Turn ON the TV and select the corresponding video input. • Press DVD/VCR to operate the DVD/VCR. • Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light).
Playback (VCR) Special playback CM SKIP SET +/– PLAY PAUSE/STILL FWD SLOW REV ATR Picture search Adjusting tracking condition Automatic tracking adjustment Whenever you insert a tape and start playback, the automatic tracking feature continuously analyzes the signal to enable optimum picture quality during playback. Reverse picture search function Press REV once or twice during playback. Forward picture search function Press FWD once or twice during playback. To return to playback, press PLAY.
Convenience function CALL ZERO RETURN SET +/– ENTER STOP PLAY CLOCK/COUNTER VCR MENU COUNTER RESET Repeat playback Zero return function The entire video tape will play until its end. The tape will automatically rewind to the beginning and the playback will be repeated. Press VCR MENU. Press SET + or – to select “AUTO REPEAT”. 1 Press CLOCK/COUNTER. 2 Press COUNTER RESET at the desired tape position. 3 Press STOP when playback or recording is completed. Press ZERO RETURN.
Playback (VCR) Convenience function (Continued) STOP VISS +/– CLOCK/COUNTER DVD/VCR SELECT Clock/counter display Press CLOCK/COUNTER. The clock and tape counter alternate with each other in the display window. COUNTER CLOCK Press DVD/VCR SELECT. The DVD mode and the VCR mode alternate with each other in the display. DVD mode Video index search system This function enables you to locate the beginning of any recording made on the VCR.
Recording (VCR) DVD/VCR 0–9 Recording a TV program Recording and viewing the same TV program. CH +/– SP/SLP DVD/VCR SELECT REC/OTR Recording a TV program Preparation: • Turn ON the TV and select to the corresponding video input. • Press DVD/VCR to operate the DVD/VCR. • Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light.) The DVD/VCR will automatically turn on. +0 TV mode direct channel selection: All channels can be instantly selected by using two buttons.
Recording (VCR) Recording a TV program (Continued) STOP PAUSE/STILL TV/VCR To stop recording Recording one program while watching another Press STOP to stop recording. While the VCR is recording, select your desired channel on the TV. When a TV is connected with an antenna cable only, press TV/VCR to select the TV position. The “VCR” display will go off and recording will continue. Select the TV channel you want to watch by using the TV channel selector. “ ” will appear on screen for about 4 seconds.
DVD/VCR 0–9 One-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. CH +/– STOP SP/SLP DVD/VCR SELECT REC/OTR One-touch Timer Recording (OTR) Preparation: • Turn ON the TV and select to the corresponding video input. • Press DVD/VCR to operate the DVD/VCR. • Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light.) Example: One-touch Timer Recording for 30 minutes.
Recording (VCR) DVD/VCR Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. SET +/– ENTER CANCEL VCR MENU EJECT DVD/VCR SELECT TIMER REC Timer recording Preparation: • Press DVD/VCR to operate the DVD/VCR. • Press DVD/VCR SELECT to select the VCR mode. • Load a cassette tape with the erase prevention tab intact. • Check the time and date are correct ' .
SET +/– ENTER CANCEL VCR MENU DVD/VCR SELECT TIMER REC proceduretimer ToSetting set daily/weekly To confirm or cancel a program Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MOSA: Monday to Saturday) Timer recording Follow the procedure of timer recording on page 42 . At step 3, press SET + or – repeatedly until the desired setting appears. Then press ENTER. 1 If the Timer has been activated, press TIMER REC to deactivate the Timer.
Other functions (VCR) Stereo recording and playback/ Second Audio Program (SAP) ENTER SET +/– VCR MENU AUDIO SELECT Stereo recording and playback The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts. When a MTS STEREO broadcast is received, “STEREO” will appear on the screen for about 4 seconds and the program can be viewed or recorded in stereo. The Hi-Fi stereo recording procedure is the same as for normal recordings.
DVD/VCR Duplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. INPUT SELECT STOP SP/SLP DVD/VCR SELECT REC/OTR Duplicating a video tape Preparation: • Turn ON the TV and select the corresponding video input. • Press DVD/VCR to operate the DVD/VCR. • Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light.
Other functions (VCR) DVD/VCR Recording a DVD/CD disc You can record disc material in DVD, Video CD, Audio CD, etc. onto a Video tape with this DVD/VCR. STOP PLAY SP/SLP DVD/VCR SELECT REC/OTR Duplicating a DVD or CD disc Preparation: • Turn ON the TV and select the corresponding video input. • Press DVD/VCR to operate the DVD/VCR. • Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light.) • Load a cassette tape with the erase prevention tab intact. • Load a DVD/CD disc.
Basic playback (DVD) DVD/VCR Playing a disc This section shows you the basics on how to play a disc. ON/STANDBY CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. DVD VCD CD VCR/DVD STOP Disc tray C/D/B/A ENTER Display window PLAY OPEN/CLOSE Basic playback Preparations: • When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD/VCR.
Basic playback (DVD) To obtain a higher quality picture Occasionally, some picture noise not usually visible on the TV screen during a normal broadcast may appear while playing a DVD video disc. It is because due to high resolution pictures on these discs which include a lot of information. The amount of noise depends on the disc you use with this unit. You should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.
Playing a disc (Continued) You can play discs at various speeds. PAUSE/STILL PLAY FWD SLOW REV SKIP / DVD VCD CD Playing in fast reverse or fast forward directions Press REV or FWD during playback. FWD REV: Fast reverse playback FWD: Fast forward playback Each time you press REV or FWD, the playback speed changes. DVD VCD To resume normal playback Press PLAY. Notes: • The DVD/VCR mutes sound and subtitles during reverse and forward scan of DVD/VCD video discs.
Advanced playback (DVD) Zooming/Locating desired scene 0–9 DISPLAY JUMP C/D/B/A ENTER CLEAR ZOOM DVD VCD CD Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. 1 Press ZOOM during playback. The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0). 1 2 D/B B/A A to view a different part of the Press C/D frame.
Marking desired scenes The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene. C/D ENTER CLEAR MARKER DVD VCD 1 Marking the scenes DVD VCD Press MARKER during playback. 1 Returning to the scenes Press MARKER during playback or stop mode. Marker1 Marker2 Marker3 2 Marker1 Marker2 Marker3 Select the blank Marker using C or D. Then press ENTER at the desired scene. 2 Press C or D to select the Marker 1-3.
Advanced playback (DVD) Repeat playback/A-B Repeat playback ENTER D PLAY PLAYMODE A-B RPT DVD VCD 1 2 DVD VCD CD Repeat playback Press PLAYMODE during playback or stop mode. A-B Repeat playback A-B repeat playback allows you to repeat material between two selected points. 1 Press A-B RPT during playback. The start point is selected. [DVD] Press ENTER to select “Chapter” or “Title”.
Program playback/Random playback 0–9 You can arrange the playback order of tracks or files on the disc. And the unit can also select tracks or files at random and playback them. These feature works for Video CD. C/D/B/A ENTER CLEAR PLAY For Audio CD and MP3/WMA CD, please see “Random playback (CD/USB)” $ and “Program playback (CD/USB)” 62 . PLAYMODE VCD 1 Program playback 4 Press PLAYMODE during stop mode.
Advanced playback (DVD) Changing angles/Title selection/DVD menu DVD MENU C/D/B/A ENTER PLAY TOP MENU ANGLE DVD Changing angles When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. 1 Press ANGLE during playback. The current angle will appear. 2 Press ANGLE repeatedly until the desired angle is selected. 1/2 Note: Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD.
Changing soundtrack language/ Setting surround sound B/A AUDIO DVD VCD Changing soundtrack language You can select the language when you play a multilingual disc. 1 Press AUDIO during playback. The current soundtrack language will appear. In case of Video CD playback Audio type changes as follows each time you press AUDIO. LR L R 1/2 Eng Dolby Digital 2 Press AUDIO repeatedly until the desired language is selected.
Advanced playback (DVD) Subtitles/To turn off the PBC C/D ENTER SUBTITLE PLAYMODE DVD To turn off the PBC (see page 8) Subtitles When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off. 1 1 Press PLAYMODE in the stop mode. 2 Press / to select “Mode”, then press ENTER repeatedly until “Off” appear. Press SUBTITLE repeatedly during playback until your desired language appears.
MP3/WMA/JPEG/DivX® and Audio CD operation This player can playback the MP3/WMA/JPEG/DivX®-data which has been recorded on CD-R/RW or USB Mass Storage. To produce the MP3/WMA JPEG/DivX®-data, you need a Windows-PC with CD-RW drive or USB memory device and a MP3/ WMA/JPEG/DivX®-encoding Software (not supplied). The Apple-HFS-System cannot be played. This player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.
Advanced playback (DVD) MP3/WMA/JPEG/DivX® and Audio CD operation (Continued) ▲/▼/ / ENTER RETURN STOP PLAY DVD/USB OPEN/CLOSE +, 75* 1 +, 75* Loading media [MP3/WMA/JPEG/DivX® CD, Audio CD] Place a MP3/WMA/JPEG/DivX® CD or an Audio CD onto the disc tray, then press OPEN/CLOSE. 1 MP3/WMA and Audio CD playback In the file browser, press desired file. Press DVD/USB to display the media selection window. Press B or A to select the DISC mode or the USB mode, then press ENTER.
ck TOP MENU ZOOM DVD MENU C/D/B/A ENTER STOP PLAY SKIP PAUSE/STILL ANGLE +, 75* 1 +, 75* JPEG playback In the file browser, press C/D to select the desired JPEG file. To display a thumbnail list, press DVD MENU. Press B/A or C/D to select the desired file. (To return to a file browser, press TOP MENU.) /Picture-01.
Advanced playback (DVD) MP3/WMA/JPEG/DivX® and Audio CD operation (Continued) +, 75* 1 Playing DivX® VOD content DivX® playback Press C/D to select desired DivX® file. !"#$ %&'( &) * When PLAY has been pressed after displaying the file browser, playback begins automatically starting from the first file. In this case, if the first file is a JPEG file, the first JPEG file is played back.
▲/▼/ / ENTER PLAY SKIP / +, 75* 1 Repeat playback (CD/USB) In the file browser, press B/A or C/D to select “Repeat” during stop mode. Folder-1 Folder-2 MP3-1 MP3-2 +, 75* 1 Random playback (CD/USB) In the file browser, press B/A or C/D to select “Mode” during stop mode. Select Files Repeat :Off Mode :Off MP3-3 2 Press ENTER to select “Track” or “All”. Folder-1 Folder-2 MP3-1 MP3-2 MP3 3 Press ENTER to select “Random”.
Advanced playback (DVD) MP3/WMA/JPEG/DivX® and Audio CD operation (Continued) ▲/▼/ / ENTER PLAY +, 75* 1 Program playback (CD/USB) In the file browser, press B/A or C/D to select “Edit Mode”, then press ENTER. Folder-1 Folder-2 MP3-1 Repeat :Off Mode :Off 4 Press C/D to select “Program View”, then press ENTER. Program View shows only the programed files that you have added in Step 2.
Function setup (DVD) Customizing the function settings You can change the default settings to customize performance to your preference. C/D/B/A ENTER RETURN SETUP DVD VCD CD 1 Setting procedure Press SETUP during stop mode. The following on-screen display appears. Parental DRC E.B.L. Menu 5 • Repeat steps 3 ~ 5 to change : Off English other option.
Function setup (DVD) Customizing the function settings (Continued) Setting details Section Option Details Menu Subtitle Audio To select the language of “Menu”, “Subtitle” and “Audio” if more than one language are available on the disc. E.B.L. To select On or Off for E.B.L. (Enhanced Black Level). TV Screen To select a picture size according to the aspect ratio of your TV. Display To turn on or de-activate the operational status display on the screen.
Parental DRC E.B.L. Menu : English Off Parental DRC Menu E.B.L. : Off English QSound TV Subtitle Screen Set Password : 4:3 On English QSound Subtitle TV Screen Set Password : English On 4:3 Output Display Audio Output Audio Display : English Interlace On : English Interlace On Picture Mode DivX(R) :VOD Auto Picture Mode DivX(R) :VOD Auto JPEG Interval : 5 Seconds JPEG Interval : Off Screen Saver : On Screen Saver : On Menu, Subtitle, Audio E.B.L.
Function setup (DVD) Customizing the function settings (Continued) Setting details Display JPEG Interval On screen display can be switched on or off when you press the buttons. Off: On screen displays do not appear when you press any buttons. On: On screen displays appear when you press the buttons (factory setting).
Parental Menu E.B.L. DRC : English Off Subtitle TV QSound Screen Set Password : Off 4:3 English Output out Audio Display Digital : English Interlace On PCM Digital Out Selected the output sound format corresponding to your system connection. Picture Mode DivX(R) :VOD Auto JPEG Interval : 5 Seconds Screen Saver : On PCM: Select when connected to a 2 channel digital stereo amplifier. Bitstream: Disc audio bitstream data will be output.
Function setup (DVD) Customizing the function settings (Continued) Setting details DRC Menu E.B.L. Parental : English Off QSound Subtitle TV Password Screen : Change On 4:3 English Audio Display HD Jpeg : English Off On Picture Mode Output : Auto Interlace JPEG Interval DivX(R) VOD : Display 5 Seconds Screen Saver : On Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit.
Output You can select the video output signal of the DVD video player to the TV from “Interlace” or “Progressive”. Interlace: Select when connecting to a composite TV or a TV equipped with component video inputs but progressive scan is not compatible. Progressive: Select when connecting to a TV equipped with component video inputs and progressive scan compatible. Warning: Once “Progressive” is selected when connecting to a TV progressive scan incompatible, no image will be seen on the video display.
Function setup (DVD) Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. 0–9 ENTER RETURN PLAY OPEN/CLOSE DVD Temporary disabling of rating level by DVD disc 1 Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit "% .
Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” $# .
Others Troubleshooting Before calling a service technician, please check the following table for a possible cause of the symptoms and some solutions. Symptoms Solutions Page DVD/VCR • Make sure the power cord is plugged in. • Try another AC outlet. • Unplug unit, then plug it back in. • Select the DVD or VCR mode before operating. • Antenna connection is not correct or antenna cable is disconnected. • The video channel is not in the correct position or the TV is not set to the video channel 3 or 4.
Specifications General Power supply Power consumption Weight Dimensions Tuner Antenna input/output RF channel output Color system Video head Audio track Hi-Fi frequency response Hi-Fi dynamic range FWD/REV time at 25˚C (77˚F) Applicable disc Frequency range S/N ratio Harmonic distortion Wow and flutter Operating conditions AC 120 V 60 Hz Operation: 20 W, Stand by: 2 W 7.7 lbs (3.5 kg) Width: 16-15/16 inches (430.6 mm) Height: 3-9/16 inches (89.7 mm) Depth: 9 inches (228.7 mm) 181 channel freq.
Others - IMPORTANT CANADIAN WARRANTY INFORMATION GARANTIE CANADIENNE STANDARD WARRANTY TYPE OF SET DVD Player DVD/VCR Combination Home Theatre in a Box DVD Recorder Portable DVD WARRANTY PERIOD 12 MONTHS CANADIAN WARRANTY Toshiba of Canada Limited (TCL) makes the following limited warranties to original consumers in Canada. Please retain your “Bill of Sale” as proof of purchase. To obtain a “Canadian Warranty” please register online at www.toshiba.ca.
Memo Others ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ......................................................................................................
ColorStream and ColorStream Pro are registered trademarks of Toshiba America Consumer Products, L.L.C.