TOSHIBA Introduction Connections VIDEO/AUDIO _ DIGITAL AUDIO Basic playback DVD VIDEO/AUDIO PLAYER SD.
SAFETY PRECAUTIONS i!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The lightning flash with arrowhead symbol, within an equilatera
The instructions shall state that an ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in each pole shall be incorporated in the electrical installation of the building. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 5" a In the spaces provided below, record the Model and Serial No.
IMPORTANT SAFETY INSTRUCTIONS i!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND I
7, Do not block manufacturer's any ventilation instructions. openings. Install in accordance with the , 5" a 8, Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. stoves, 9, Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
IMPORTANT SAFETY INSTRUCTIONS i!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 13.
18. Keep your fingers well clear of the disc tray as it is closing. Neglecting so may cause serious personal injury. to do 5" a 19. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and serious damage to the apparatus. 20. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and apparatus malfunction.
r 1 LNoteson- -"nanannng j • • • • • When shipping the DVD player, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD player. Do not leave rubber or plastic products in contact with the DVD player for a long time. They will leave marks on the finish. The top and rear panels of the DVD player may become warm after a long period of use.
on Discs IOn handling discs 1 I Structure of disc contents 1 5" a • Do not touch the playback side of the disc. Normally, DVD video discs are divided the titles are sub-divided into chapters. are divided into groups, and the groups into tracks. VIDEO CDs/audio CDs are tracks.
on Discs (continued) About this owner,s manual 1 This owner's manual explains the basic instructions of this DVD player. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD player may not respond to all operating commands. This is not a defect in the DVD player. Refer to instruction notes of discs. Playable discs 1 This DVD player can play the following Disc Mark discs.
of Contents Introduction Advanced • SAFETY • IMPORTANT SAFETY INSTRUCTIONS ... 4 • Precautions ............................................... 8 • Notes on Discs .......................................... Notes on region numbers ............................... • Table • PRECAUTIONS of Contents .......................... 2 .................................... Identification of Controls ....................... Front panel ..................................................... Rear panel .
of Controls See the page in [_ for details. r 1 L Front panel / POWER indicator [_ OPEN/CLOSE PAUSE button [_ button [_ DVD AUDIO indicator Turns off in the playback of a disc except STOP button [_ or stop mode 1 a DVD audio disc. PLAY button [_ ] Disc tray [_ ] DVD display [_ SKIP buttons [_ POWER button [_ RETURN button [_ Cursor control/ENTER button [_ MENU button NAVl button [_ TOP MENU button [_ Rear panel ColorStream ® (Component video) VIDEO OUT jacks (Y/PB/PR) [_ 5.
I DVD display 1 • Repeated pressing of the FL DIMMER button on the remote control changes the brightness of the display. FLDIMMER c) Normal t _ Total playing time/remaining elapsed time indicators Chapter/track Dimmed _ Off I time/ number indicator Memory playback indicator Title/group number indicator HDCD indicator VIDEO CD/CD indicator DVD/DVD-AUDIO Random playback indicator i indicator Multifunctional indicator (indicates operating status or messages, etc.
of Controls (continued) The instructions in this manual describe the functions on the remote control. See the page in [_> for details. [ Remotecontrol/ OPEN/CLOSE / button [_ l ] A 0PEr,flCLOSE S ANGLE SUBTITLE AUDIO SETUP TOP MENU MENU ANGLE button [_ Power button [_ j.
I Loading batteries 1 I 0perating with the remote control 1 5" a Q. Point the remote control at the remote sensor and press the buttons. Open the cover. Within about 7 m (23 feet) Insert batteries (AAA size). Make sure to the marks 3 to match inside the + and - on the batteries the battery compartment. Close the cover.
to a TV Connect the DVD player to your TV. For details of output sound, see E_. Connecting to a TV 1 Signal flow v o:JT To S VIDEO OUT _ (yellow) (white) _ (red) To VIDEO OUT To 2CH AUDIO OUT L To wall outlet Set to '1." Audio/video cable (supplied) S video cable (not supplied) TV or monitor with ) audio/video inputs = To video input (yellow)l If the TV has an S video input, connect the DVD player with an S video cable. When using an S video cable, do not connect the yellow video cable.
INTERLACED outputs/inputs (ColorStream ®) Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback. Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR) In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.
• For connection to your TV, see "Connecting to a TV" • For details of output sound, see [_. • This section uses the following reference marks. : Front speaker D : Rear speaker D : Sub woofer ] : Center speaker : Signal flow Notes • DO NOT connect the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver.
o Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor.
nnecting to Optional Equipment (Continued) Digital Theater Systems (DTS) DTS is a high quality surround technology used in theaters home use, on DVD video discs or audio CDs. and now available If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs. Amplifier equipped a DTS decoder TO OPTICAL with _', i_1_ TO COAXIAL /| / MPEG2 trademarks of Digital Theater Systems, I Inc.
O O 5.1ch surround • Use sound The Dolby Digital decoder equipped with this DVD player enables you to obtain the full benefit of 5.1 channel sound tracks when you connect the DVD player to an amplifier equipped with 5.1 channel audio inputs. the DVD Dolby _" ....] _ r--_i_-- To5.1ch audio Audio cable inputs [ Connecting to an amPlifier i" If II/ _ TO OPTICAL type digital i_11_TO COAXIAL tl/_ type digital audio input !1 audio input via recording Make the following setting.
CAUTION a Disc This section shows you the basics on how to play a disc. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. [ Preparations • When you want to view a disc, turn on the TV and select the video input connected to the DVD player. • When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to the DVD player. 1 Press the power button (POWER).
I • ¸............ I 4 _:>i:I_%' ii :: _MENU _: TOP MENU Cursor control/ ENTER To obtain a higher quality picture Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this DVD player, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.
a Disc (continued) _: o c c:_ • Still pictures included on DVD audio discs DVD audio discs may include still pictures, which are classified into two large groups. • Slideshow: Still pictures appear one after another automatically consistent with the disc program. They cannot be operated. • Browsable pictures: You can display your favorite still picture selected with the buttons on the remote control. Some of those may change automatically. : To select a picture.
riable Speed Playback i ...... i You can play discs at various speeds, and resume playback from the location where you stopped playback. _ REV FWD PLAY PAUSE/STEP Press REV or FWD during playback. REV FWD _ REV : Fast reverse FWD: Fast forward • To resume normal playback Press PLAY. playback w ¢) PLAY "0_ playback O" Each time you press the REV or FWD button, the playback speed changes.
riable Speed Playback (continued) 0 0 0 0 ! 0 ::::_c_._.,c3q_PLAY ':;'i::_ SLOW _::DC;'<:_0 c:::) • Press SLOW during playback. SLOW SLOW Each time you press the SLOW button, the slow-motion speed changes. I_- CK3 If you press the SLOW -11 button during playback, you can view the picture in reverse slow-motion. (Only when using a DVD video disc.) "11 Notes • The sound is muted during slow-motion playback. • The playback speed may differ depending on the disc.
a Desired Section Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. DVD audio discs are divided into groups, and the groups are sub-divided into tracks. VIDEO CDs and audio CDs are divided into tracks. You can quickly locate any specific title, chapter, group, or track. m DVD audio disc __ DVD video disc I.
a Desired Section (continued) ::: ::: :::_ J_ CLEAR Cursor control/ ENTER { _SKIP (::: :: :: c: ......._T Number buttons :P (::: :: :? 1 PressT. Repeat steps 2 and 3 if necessary. If you are using a VIDEO CD/audio CD, skip steps 1 and 2. Then at step 3, enter the number for the track you want using the number buttons. Press PLAY or ENTER. SEARCH (_) PLAY e.g. _ Playback selected the cursor control (,/1_) aMove section you want to locate.
a Specific Location Directly You can access a specific location by entering its corresponding minutes, seconds). 1 Notes Press T several times. SEARCH (!) You may have to press further depending on the disc. Press the button repeatedly until the clock icon is highlighted. e.g. Press the number buttons to enter the time. e.g. QD-(]D-(3D-(£)-QD 3 Press PLAY or ENTER. PLAY _ Playback location. ® 34 time (hours, starts from the desired • Some discs may not respond to this process.
@ing Repeatedly O 0 ) You can play a specific title, chapter, group, track, or segment repeatedly. control () ¢1 <3 ii) CLEAR hl <>1) C} 1) C <) :; :;: ) ii' ii_ i _ :; _A-B REPEAT RPT If you select the mode during Press REPEAT. REPEAT C3 playback, the DVD player automatically starts repeat playback after finishing the current title, The mode menu appears. chapter, group or track. Q.. < 3 Press REPEAT repeatedly or move cursor control (A / T) to select the the repeat playback mode.
in a Favorite Order i 0 0 0 You can combine your favorite titles, chapters, groups, or tracks and play them in the order you determine. You can program up to 30 selections into the memory. (Memory playback) ENTER :LEAR --2 --1 • the programmed selections 1 While the display appears on the TV screen, move the cursor control to highlight the item you want to change. 2 Change the selection following the instructions in step 2. Insert stop.
in Random Order x You can play titles, chapters, groups or tracks in random order. (Random playback) e CLEAR = c: .................. _ 12 • To resume normal playback Press CLEAR. Press RANDOM. RANDOM The mode menu appears. CLEAR CD Q. Press RANDOM or move cursor control (Arepeatedly / I') to select the the random playback mode.
a Picture _o o o i You can magnify areas within a picture. : • • Cursor control/ ENTER ZOOM/ZOOM+/ZOOM- Zoom point To shift: During normal,ZOOM+ slow ororstill playback, press ZOOM, ZOOM-. r_ZOC._ The DVD playerentersthe zoom Q 0 (_) playbackmode,and a monitor scope andan iconappear. Move the cursor control. e.g. To restore the center of the picture: CLEAR (_) • To hide the monitor zoom Select the zoomlevel. point and magnification Press the CLEAR scope button.
the Sound Enhancement (E.A.M.*) y cting You can easily switch a preferred audio enhancement. *E.AM.: Enhanced Audio Mode I 0 _:? 1:1:: :z: ::17{11) ::::Z :2:::::ZZ: 1; ......... _ 117 (2) 1: I, 2 :::: 11:,2:1<11 :: :: 1: {: • To exit the audio enhancement selection Press ENTER. Press E.A.M. E.A.M. The sound enhancement 0 appears. menu ® Alternatively leave the DVD player unattended 5 seconds after having made a selection. for about < o 0" Press E.A.M.
the Camera Angle If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching. CLEAR ÷ 1 Press ANGLE while playing a scene recorded with multiple angles. ANGLE While playing a scene recorded with multiple angles, the angle icon (_) flashes in the DVD display. Press the ANGLE button while the angle icon is flashing. e.g. Press move cursor controlANGLE (A/V) or while thethe angle number is displayed on the TV screen.
cting Subtitles _:::_ You can display subtitles on the TV screen and select a subtitle language from those included on the DVD video disc. (_ SUBTITLE Cursor control/ ENTER CLEAR • Press SUBTITLE during playback. SUBTITLE The current subtitle setting is displayed. To turn subtitles 1 Press SUBTITLE SUBTITLE on or off during playback. e.g. 2 Move the cursor control (_ / I_) while the subtitle setting is displayed on the TV screen, to select "On" or "Off." 0..
1,2 a Language (? 0 C_ i You can select a preferred language and sound recording system from those included on the disc. e • audio streams CLEAR of DVD audio During playback, perform steps can switch streams 1 and 2. Press AUDIO during playback. AUDIO Selecting ::' The current audio setting is displayed. e.g. discs 1 and 2. At step 2, you Number of a stream selected e.g. Number and information of a stream currently played The abbreviation of the language appears of the language name.
• Output sound conversion table (sampling frequency/quantization Audio Discs Sound recording BITSTREAM/PCM jack Dolby Digital 48 kHz/16 DVD video discs Bitstream PCM" 5.1CH SURROUND AUDIO OUT jacks - 48 kHz!2O bit 48 kHz/16 bit 48 kHz!16 48 kHz/24 bit 48 kHz/24 bit 48 kHz!24 bit PCM 96 kHz/16 bit 96 kHz/16 bit 48 kHz!16 bit 96 kHz/2O bit 96 kHz/2O bit 48 kHz!2O bit 96 kHz/24 bit 96 kHz/24 48 kHz!24 bit 48 kHz!16 bit MPEG2 i: ¢) l 44.1 kHz/16 bit 44.
ing the Graphic Remote Control - V-REMOTEPressing one button can display a graphics based on-screen remote control that allows you to control playback as if you were doing it from the actual remote control. 1 • During playback, press V-REMOTE. Icons and features See the pages in I_ The graphic remote control (Virtual Remote) appears. For the meaning of each icon, see right. for details on the features.
cting the Playback Function - QUICK- Pressing one button can display a list of playback functions which are relevant to your current playback mode. You can check and modify them from the list. 2 -5 [ i) c3 0 c]) (]D c[[i I[]i) C]) ¢11]C) l_+I !! !! i 1 During playback, press QUICK. The following on-screen display appears. (The actual display will vary depending on the playback status.) The on-screen display disappears and playback will resume according to your selection. I5 Press .+E. e.g.
cessing Features - NAVI- The NAVI menu provides an icon based display from which you can easily access key playback function or setting. _: 2, 3 • To exit the NAVI menu Press NAVI. Press NAVI. The NAVI menu appears. e.g. Alternatively move the cursor control to remove the highlight from an icon to the center position, and press ENTER. Move cursor icon. control to select a desiredthefeature For details on each feature, refer to Note Depending on the disc, some features cannot be accessed.
Navi menu selections Strobe Viewer You can divide a desired analysis. scene into stop action frames for careful DA> You can change the default settings to customize performance to your preference. Setup IO You can display thumbnail views of the first scenes chapters and select a preferred one. Preview of titles or ¢) 0 s_ Capture You can sample a scene from a playback into a background picture.
cessing Strobe Features - NAVI- (continued) Preview Viewer You can divide a desired scene into You can display thumbnail views of the first scenes of titles or chapters and select a preferred one. stop action frames for careful analysis. After selecting this icon and pressing following on-screen display appears: ENTER, the After selecting this icon and pressing following on-screen display appears: e.g. 1 ENTER, the e.g. Move the cursor control to select.
Capture Angle Viewer You can sample You can display all camera angles simultaneously and select your preferred one from them. a scene from a playback picture and transform a background picture. After selecting this icon and pressing following on-screen display appears: it into ENTER, the After selecting this icon and pressing following on-screen display appears: ENTER, e.g.
cessing Picture Features - NAVI- (continued) Setting You can fine adjust picture quality and store up to 3 custom picture settings in the memory of the DVD player. After selecting this icon and pressing following on-screen display appears: ENTER, the Press ENTER. The sub menu appears. e.g. / _ +2 I [ Move the cursor control (_1/ I_) to adjust the value, and press ENTER. e,g, 1 Move the cursor control (A / V) to select, and press ENTER.
Display Closed You can view information about a disc and its operational TV screen. After selecting this icon and pressing following on-screen display appears: status on the Caption You can display closed caption included on a disc without connecting a closed caption decoder to your TV. ENTER, the After selecting this icon and pressing following on-screen display appears: ENTER, the e.g. Chapter IO e.g.
stomizing the Function Settings You can change the default settings to customize performance preference. 1 ............._ Press SETUP during stop. SETUP The following 1 6 to your Move the cursor control (& /T) to select the setting you want to change, then press ENTER. on-screen display appears. Change (A the/ T) selection the cursor control or otherby buttons, by referring to the corresponding pages [_, then press ENTER.
Setting Details TV Shape To select a picture size according to the aspect ratio of your TV. 58 Progressive 4:3 Output To select the video output of pictures recorded in 4:3 format. (Only when connected to a PROGRESSIVE TV.) To select the system of output signal. (Only when connected to a PROGRESSIVE TV.) 58 PCM Down Sampling To select a sound processing option according to performance of the connected equipment. (Only when the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack is connected.
stomizing the Function Settings (continued) Select the video output of pictures recorded in 4:3 format. (Only when connected to a PROGRESSIVE TV.) 4:3: Displays images in 4:3 aspect ratio with masking bars to the left and right of the picture. Full: Displays pictures expanded horizontally the 16:9 screen. 4:3 Letterbox: 4:3 Normal: 16:9 Widescreen: Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture.
Audio Aud;o OutSelect Bitstream DynamicRangeControlOn KaraokeVo_al Off CDAttenuation Select the output sound format corresponding to your system connection. For details of sound recording systems, see [_. Off Bitstream: Make this selection only when you use your audio equipment (e.g. receiver) connecting to the DVD player via the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack. when you play a DVD video disc recorded on the Dolby Digital, DTS, MPEG1 or MPEG2 recording system.
stomizing the Function Settings (continued) (Continued) When you select "Analog 6Oh': Make the following settings for the built-in 5.1ch surround decoder. ¢ (Center)Speaker $ (Surround)Speaker On On Subwoofer Center ChannelDelay On Omse( Adjusting the delay time: When enjoying 5.1 ch surround playback, it is ideal to choose a listening position that is the same distance from each speaker.
3) Select "Test Tone" and press the ENTER button. Language The DVD player outputs a test signal to each speaker when it is in stop mode. When playing a DVD video disc, it substitutes the current p_HO D;scMenu LaaguageENG Aud;oLaaguage subtitleLaaguage ENG -- - sound for the test signal. Move the cursor control (< / I_) to select the receiving speakers, and adjust the volume of each speaker at the same level by moving the cursor control (A / V).
stomizing English: French: Spanish: Others: the Function Settings (continued) To To To To 3) Move the cursor control (< / I_) to shift and select the second character by moving the cursor control (A / T). play sound tracks in English. play sound tracks in French. play sound tracks in Spanish. make a further choice. Langunge On-ScreenLanguageENG DiscMenu LanguageENG After pressing the ENTER button, follow steps 1) - 4) below. 1) Obtain the abbreviation of the preferred language from the list [_.
Operation ParentalLock Off RemoteConfirmationOn Off: Operational modes (e.g. "D D", " _ displayed. On: Operational modes (e.g. "D D", " _ displayed on-screen. Blue: Gray: Capture: Jacket: ") are not Auto: ") are Frame: Blue background. Gray background. To use a picture you sampled and stored in the memory using the Capture feature [_ as a background. To use the jacket picture included on some discs as a background. If it is not included, a gray background will be substituted.
stomizing the Function Settings (continued) 3) Move the cursor control (A / V) to select the (Continued) 1) Press the number 4-digit security button. parental button. buttons to create a personal lock level, then press the ENTER code, then press the ENTER If you make a mistake before pressing the ENTER button, press the CLEAR button and enter your 4-digit security code again.
Off: The beeper does not sound. On: The beeper sounds with each remote operation. All s_ngs will be restoredto fnlt_al;z_ pre-setlevels. Off: The DVD player continues after playback of a title/group is completed. On: The DVD player stops after playback of a title/ group is completed. To restore all settings to the factory set. 1) Move the cursor control (A / T) to select "Yes," and press the ENTER button. Off: When playing a VIDEO CD without using the menu.
of Languages Abbreviation Language No alternate CHI (ZH) DUT (NL) ENG (EN) FRE (FR) GER (DE) ITA (IT) JPN (JA) KOR (KO) MAY (MS) SPA (ES) AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DZ EL EO ET EU FA FI FJ FO FY GA GD GL 66 language Chinese Dutch English French German Italian Japanese Korean Malay Spanish Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Belorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish B
))))))))))))))))))))))))))))))))))))))Ut_Brs Calling Service Personnel Check the following guide for the possible cause of a problem before service. Symptom Cause Correction No power. • The power plug is disconnected. • Connect the power wall outlet. The DVD player turned off by itself, • The automatic the unit off. No picture. No sound. power off function occasional picture has distortion.
DVD player Power supply 120 V AC, 60 Hz Power consumption 17 W Mass 3.0 kg External dimensions 430 x 81 x 311 mm (W/H/D) Signal system Standard Laser Semiconductor Frequency range NTSC laser, wavelength DVD linear sound : 650 nm / 780 nm 48 kHz sampling 96 kHz sampling 192 kHz sampling Signal-to-noise ratio More than 112 dB Audio dynamic range More than 108 dB Harmonic distortion 4 Hz to 22 kHz 4 Hz to 44 kHz 4 Hz to 88 kHz Less than 0.
))))))))))))))))))))))))))))))))))))))Ut_Brs LIMITED WARRANTY DVD PLAYER Toshiba America Consumer Products, Inc. ("TACP"), Toshiba Hawaii ("THI") and Toshiba Canada Limited ("TCL") make the following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift from the original purchaser and to no other purchaser or transferee.
How to Obtain Warranty Service (1) Refer to the troubleshooting guide in your owner's manual. This check list may solve your problem. (2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30) days after you find a defective product or part. (3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center.
TOSHIBA Printed in China
