Owners Manual TEC LOAD CELL SCALE (WITH LABEL PRINTER) MODEL SL57 SERIES (US. Version) Table of Contents TEC TOKYO ELECTRIC CO., LTD.
WARNING This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
TABLE OF CONTENTS Page INTRODUCTION.. .............................................................................................................................. PRECAUTIONS.. ................................................................................................................................ 1. SPECIFICATIONS.. REMOTE DISPLAY.. 4. KEY ARRANGEMENT.. 5. KEY AND 6. LEVEL 10. lo- 1 11. 12. 4 .....................................................................................
INTRODUCTION We This thank you series very has much been for purchasing designed with our TEC TEC Electronic reliability SL57 and offer Series a cost Scale. efficient system for a modest investment. And the Because store.
1. SPECIFICATIONS T Items Vlaximum Jsing 30 Ibs Capacity Vlinimum Scale Weight Iisplay Division Price ‘ower - 30 Ibs 30.05 Ibs 3.0 1 - 30 Ibs $ 0.01 - 99.99 $ 0.01 4C 12OV t lo%, Presettable Price Display Requirement Zurrent 12OV. Consumption remperature qelative IA. 23” - 104°F 35% - 85% 26.5 Ibs Limits Humidity Weight Remote Ibs 3- Range Vlinimum 3.01 3.
2. OVERVIEW Keyboard 3.
4. KEY ARRANGEMENT II J iI-’ -1 [ ZERO1 I Unit Price Preset Keys Department Keys - c NOTE: The characters the convenience shown in this 5. KEY AND Name CLEAR indicated on the Unit of explanation Price in this Preset manual. keys The the Department keys on the are shown actual unit are for not as illustration. LAMP FUNCTIONS Function of Key or Lamp 1. This Key and indications key 2.
Name FOR Function of Key or Lamp 1. This Key 2. key is used In “X/Z” FOR mode to issue switch “BY the COUNT” (2) position, this in weighing function label with key is used split price. to issue the TEST label. El Mode Switch = “WEIGH (1) WEIGH (Xl 1. This position position in the BY COUNT{ PROGJ position: 2. This FIX(Z) B (X)” “FIX is used is used unit when to read mode of SL57. (X) all the accumlated switch sales (2) is set to “X/Z totals PROG.
Name Function of Key or Lamp POWER/ZERO This Key q q q q q key is used “ZERO” POWER to supply power to the main circuit and to adjust point. /ZERO PRINT/VERIFY 1. This key has the function of label issue. 2. During programming, data is input to the SL57 Key by using this key. PRT/+ PROGRAM This key is not used Key in SL57 system. PROG. SAVE Key This key is used to save tare commodity from the platter. and unit price after taking off the SAVE TARE Key l.
6. LEVEL ADJUSTMENT Set the Level @@ the Correct Incorrect Adjusting scale the on a stable and by turning the scale center circle. figure, turn bubble comes the For example, adjusting to the legs center level surface. adjusting in the (1) and of the legs case so that of the (2) in the the air condition direction bubble comes to shown in the left so that the shown circle. Legs f Level 7.
8. REMOVAL 1. Remove Then AND the pull 2. Remove printer the cover head-up the backing REPLACEMENT core and lever of the side roll direction. and the label paper. NOTE: To remove loosen the the label paper clockwise backing by turning and paper, the remove the paper paper stopper. Be careful winding Referring roll 3. to the on the Push to shaft figure never turn the paper clockwise. on the right, set the label unit.
9. NOTES (1) BEFORE Be sure to insert (2) When the power the key is turned on (3) While (4) (5) Do turn the the scale. the If scale (7) If Zero key sequence, to OFF occur into AC outlet is used with an unrated has shifted scale goes after then do during position during again through 1 1 1 1 . . . . ..and not the and when power put anything on the to readjust remove power power source, scaling, and the inaccurate -9- the sequence, displays.
10. OPERATION 10.1. * Weighed Auto (1) Article Mode Press (2): AUTO preset price key SW. (1): WEIGH position] position] ot’ entel of S 2.50/lb. an article (3) The [Mode price. Unit (2) Place SW. price unit ex.) Registration [Mode unit the PROCEDURES label on the is issued platter. automatically. (Sample Id9 Hilton * Manual (1) Mode Press unit the unit ex.) price Unit preset price (2) Place an article (3) Press pPRT/+ the (4) The SW.
1 O-2. Fix + Auto Price Registration Mode (1) Press [Mode unit the unit ex.) Unit price Place (1) price label Manual unit the unit ex.) Unit price price Place an article (3) Press iPRT/+ (4) The key (1): FIX position] position] or enter the label s 3.00/lb WEIGHT is set U. PRICE T . PRICE q key on the platter. automatically. [Mode SW. preset (2): MANUAL position] key or enter price.
10-3. * By Count General Registration [Mode SW. (1): BY COUNT position] ODeration WEIGHT (1) Enter the (Max. 2 digits) (2) Press ml. (3) Enter the preset total p] the (5) When (1 or press or department Mode 1 the SW.(2) position, Mode AUTO key is set to single SW.(2) position, issued in peeling it. la- the succession label is after $1825 5ms is set to m 1710 Id9 Milton mm 3 5~1t~ts m El wl.lrn St.
* Split Price Operation WEIGHT (1) (2) (3) (4) Enter the (Max. 2 digits) Press jFOR[. Enter the price. (Max. Press !FORI (5) Enter the preset (6) quantity (7) The quantity for U. PRICE T PRICE [---.--I[];clI that total 2 digits) total price or press the key. Press for of sale. i the label or department key article. is issued.
1 O-4. Tare Function There are two -f Direct Tare (1) tare Place Procedures kinds of tare subtraction Subtraction weight on the procedures, one Mode SW. (1): WEIGH Mode SW. (2): is “Direct or FIX MANUAL tare”, another is “Preset tare”. 1 platter. WEIGHT [c.ssl (2) q Press [I (3) Start the weighing or fix ‘+ NET Ibs. When price operation. (4) The label (5) Remove is issued. the article together with tare.
* (1) Preset Enter Tare the ex.)Tare Subtraction tare Press q (3) Place the Mode SW. (1): WEIGH Mode SW. (2): of 0.50 1 MANUAL nn0 weight. weight (2) #l 5 Ibs. . O.SO tare of 0.50 Ibs on Ibr the platter. @ (4) Start the weighing Sr Preset Tare (1) the Enter ex.)Tare (2) (3) operation. Subtraction tare q Place the tare Mode SW. (1): FIX Mode SW. (2): MANUAL 1 weight. weight Press #2 of 0.50 of 0.50 Ibs. Ibs on the platter.
1 O-5. Save Save key Function is used Procedures to save tare weight and unit price (or total price) after taking off the article from platter. Sr Weighed Article (1) Place tare (2) Press q Mode weight Saving on the [Mode SW. (1): WEIGH] WEIGHT platter. key. * (3) Enter the (4) Press m unit price. Price are Place an article key. Mode Unit [I (s.cs] NET [I -$$ NET -++ PREPACK -+$ NET -Fc PREPACK on. SW.
* Fix Price Mode Saving [Mode SW. (1): FIX] WEIGHT (1) Enter the tare (2) Press q key. (3) Enter the (4) Press [m Total Price Place an article (5) ex.) total are UAL Mode q Clear the and saved. together SW. and with tare iPRT/+ or key. mode and total price. (8) Remove the article together NET ‘+ PREPACK ;+$ NET ;+- PREPACK of key. save ++ tare. (2) is set to MANPress position, Press weight Ibs. department (7) Tare of 5 Ibs 0.
10-6. * Unit Per Price l/2 per l/2,1/4 Ibs [Mode SW. (1): WEIGH] Ibs U.PRICE WEIGHT (1) Enter the unit (2) Press /g key. (3) Place an article (4) When Mode price. on the SW. I platter. (2) is set to AUTO the label is price preset key. position, T PRICE nnn I u.uu ma JUL 25 IPI nAU604 issued automatically. or Per l/4 Ibs U. PRICE WEIGHT (1) Press ex.) unit Unit price of s 0.75/lb in preset is set .
10-7. The Date date Change can [Mode be changed SW.(2): AUTO or MANUAL] temporarily. T . PRICE (1) Press PDT/TM key. L (2) Enter the ex.) Aug. (3) + Press When new date 10th. ‘87 [PRT/+] key original date key. (1) Press [DT/TM (2) Press q (3) Press jPRT/w is desired. ICS :5.8-i] [s:ZS.S:] key. key.
10-8. With Shelf the Life SL57 Date system, Setting the [Mode shelf life SW.(2): date can AUTO or MANUAL] be set for the article(s). T . PRICE U. PRICE (1) Press [DT/TM] key. (2) Press m] (3) Enter new (Max. 3 digits) Press vPRT/ key. shelf shelf life life date date. date (4) 10-9. Print At the “X/Z within the Please, key. Test Label PROG.” print check [Mode position, SW. (2): X/Z depression PROG.
11. TOTAL The READ to read have (X) reports the totals been 1 l-l. (1) OPERATION to read at the the same time totals [Mode but all the not clear resettable SW.(2): X/Z memories, while memories will PROG.] the RESET be cleared (Z) reports when the issued. Individual Press allow and PROCEDURES Department the required Read [Mode SW. (1): WEIGH (X)] department key. A!-(2) The report Pork#2 is issued. -11 29.23 w 6 149 Milton 11-2.
11-3. (1) Individual Press Department the required Reset [Mode SW. (1): FIX (211 department key. (2) The reset report Chicken#l is issued. ~mmDPT-2 I =mJUL 25 32.12 Elwl.D3s 149 Milton 11-4. (1) Grand Press (2) The the Total m key. reset report resettable Reset [Mode is issued. memories SW. Then all will be (1): FIX 6 36.86 St.
12. PROGRAMMING [Mode [Mode PROCEDURES SW.(l): SW.(2): BY COUNT X/Z PROG.] In this chapter are described operations to add to or change the data already “PROG”mode. To enable the programming operations in the “BY COUNT (PROG.)” SW.(l) and the “X/Z PROG.” position of the Mode SW. (2). 12-l. Date and Time ex,) To set the date Mode Mode (PROG.)] programmed in the position of the Mode Setting “July 25th. ‘87” and time “2 1:09”: SW. (1): BY COUNT (PROG.)SW. (2): X/Z PROG.
12-4. Address or Message (Store Address, Telephone ex.) To program the Programming No., address Mode SW. (1): BY COUNT Mode SW (2): X/Z PROG. Special “149 (PROG.) (Bottom of Message Milton - label) etc.) St.“.
Table 1: Character Code Table - Column Code 23456789 00SP 0 @ P ’ p i: Jr _' 'u' f, Row Code I 10* : JZ.izCEO II+; K
13. ERROR Take the MESSAGE following TABLE action if an error message has appeared on the total price display with the buzzer sounding. H Print L P primary for power B) Is the power C) Is AC power D) Check Has there F) Has the TO The label is not end sensors. The label run q q q Press set. out.
TEic PRINTED IN JAPAN El-04316A 9509100@
