User’s Manual L30 GMR300624EN0 GMR300624EN0 Choose freedom. Choose freedom. computers.toshiba-europe.com computers.toshiba-europe.
TOSHIBA Satellite L30 / Satellite Pro L30 Series Copyright © 2006 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. L30 Portable Personal Computer User's Manual First edition August 2006 Ownership and copyright of music, video, computer programs, databases, etc. are protected by the copyright laws.
TOSHIBA Satellite L30 / Satellite Pro L30 Series Trademarks Intel, Centrino, Intel Core and Celeron are trademarks or registered trademarks of Intel Corporation. Windows® and Microsoft are registered trademarks of Microsoft Corporation. Photo CD is a trademark of Eastman Kodak. TruSurround XT, WOW XT, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT, WOW XT, TruBass, SRS 3D and FOCUS technologies are incorporated under license from SRS Labs, Inc.
TOSHIBA Satellite L30 / Satellite Pro L30 Series Network Compatibility Statement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the additional requirements conditional in EG 201 121.
TOSHIBA Satellite L30 / Satellite Pro L30 Series TEAC CD-ROM Drive CD-224E ■ The CD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA Satellite L30 / Satellite Pro L30 Series TEAC CD-RW/DVD-ROM Drive DW-224E ■ The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA Satellite L30 / Satellite Pro L30 Series Hitachi-LG Data Storage, Inc. CD-RW/DVD-ROM Drive GCC-4244 ■ The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA Satellite L30 / Satellite Pro L30 Series TOSHIBA SAMSUNG STORAGE TECHNOLOGY CD-RW/DVD-ROM Drive TS-L462C ■ The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA Satellite L30 / Satellite Pro L30 Series Panasonic CD-RW/DVD-ROM Drive UJDA770T ■ The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA Satellite L30 / Satellite Pro L30 Series Panasonic DVD Super Multi UJ-850 ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA Satellite L30 / Satellite Pro L30 Series HLDS DVD Super Multi GMA-4082N ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA Satellite L30 / Satellite Pro L30 Series HLDS DVD Super Multi GSA-T10N ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA Satellite L30 / Satellite Pro L30 Series Pioneer DVD Super Multi DVR-K16T ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA Satellite L30 / Satellite Pro L30 Series International precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station". To prevent direct exposure to the laser beam, do not try to open the enclosure.
TOSHIBA Satellite L30 / Satellite Pro L30 Series OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigours of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual. Please also refer to the Instruction Manual for Safety and Comfort. Stress injury Carefully read the Instruction Manual for Safety and Comfort.
TOSHIBA Satellite L30/ Satellite Pro L30 Series Pressure or impact damage Do not apply heavy pressure to the computer or subject it to strong impact. Excessive pressure or impact can cause damage to computer components or otherwise cause malfunctions. PC Card overheating Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in the PC Card operation. Also be careful when you remove a PC Card that has been used for a long time.
TOSHIBA Satellite L30/ Satellite Pro L30 Series CE compliance This product is labelled with the CE Mark in accordance with the related European Directives, notably Electromagnetic Compatibility Directive 89/ 336/EEC for the notebook and the electronic accessories including the supplied power adapter, the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC in case of implemented telecommunication accessories and the Low Voltage Directive 73/23/EEC for the supplied power adapter.
TOSHIBA Satellite L30/ Satellite Pro L30 Series Therefore TOSHIBA strongly recommend that the electromagnetic compatibility of this product should be suitably tested in all non-approved working environments before use. In the case of automobiles or aircraft, the manufacturer or airline respectively should be asked for permission before use of this product. Furthermore, for general safety reasons, the use of this product in environments with explosive atmospheres is not permitted.
TOSHIBA Satellite L30/ Satellite Pro L30 Series Limitation of Liability For damage occurring due to an earthquake or thunder, fire beyond our responsibility, action by third party, other accident, intentional or accidental mistakes by a user, misuse, use under abnormal conditions, we do not take any responsibility. For incidental damage (loss of business profit, business interruption, etc.) occurring due to use or disability of the product, we do not take any responsibility.
TOSHIBA Satellite L30/ Satellite Pro L30 Series WARNING Turn OFF the Wireless Communication switch of Wireless Products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles. Turn OFF the Wireless Communication switch inside a medical facility or near medical electric equipment. Do not bring medical electric equipment close to the product.
Table of Contents Chapter 1 Introduction Equipment checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 Options . . . . . . . . . . . . . . . . . . . . .
TOSHIBA Satellite L30 / Satellite Pro L30 Series Chapter 4 Operating Basics Using the Touch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Using the optical media drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Writing CDs with the DVD-ROM & CD-R/RW drive . . . . . . . . . . . . . 4-7 Writing CD/DVDs with the DVD Super Multi drive supporting DVD±R Double layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TOSHIBA Satellite L30 / Satellite Pro L30 Series Chapter 8 Optional Devices PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 Additional battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7 Additional AC adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7 External monitor . . . . . . . .
Preface Congratulations on your purchase of the L30 computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, highperformance computing. This manual tells how to set up and begin using your L30 computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
TOSHIBA Satellite L30/ Satellite Pro L30Series Chapter 4, Operating Basics, includes instructions on using the following devices: Touch Pad, Sound System, optical media drive, modem, wireless communication and LAN. It also provides tips on care of the computer. Chapter 5, The Keyboard, describes special keyboard functions including the keypad overlay and hot keys. Chapter 6, Power and Power-Up Modes, gives details on the computer's power resources and battery save modes.
TOSHIBA Satellite L30/ Satellite Pro L30Series ABC When procedures require an action such as clicking an icon or entering text, the icon’s name or the text you are to type in is represented in the type face you see to the left. ABC Names of windows or icons or text generated by the computer that appears on its display screen is presented in the type face you see to the left. Display Messages Messages are used in this manual to bring important information to your attention.
Chapter 1 Introduction This chapter provides an equipment checklist, and it identifies the computer's features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
Introduction ■ Wireless LAN driver (Can be used only with Wireless LAN models) ■ Sound driver for Windows® ■ DVD Video Player* ■ LAN driver ■ Pointing device driver ■ TOSHIBA Hotkey Utility ■ TOSHIBA User's Manual ■ TOSHIBA Assist* ■ TOSHIBA ConfigFree* ■ TOSHIBA Touch and Launch* ■ TOSHIBA Power Saver Utility* ■ TOSHIBA Touch Pad On/Off Utility ■ TOSHIBA PC Diagnostic Tool* ■ TOSHIBA Zooming Utility* Other software may preinstalled dependant on the model purchased.
Introduction Memory Main Memory Disclaimer Slots Video RAM Part of the main system memory may be used by the graphics system for graphics performance and therefore reduce the amount of main system memory available for other computing activities. The amount of main system memory allocated to support graphics may vary depending on the graphics system, applications utilized, system memory size and other factors.
Introduction Computers in this series can be configured with a fixed optical media drive. The available optical media drives are described below. DVD-ROM & CD-R/RW Some models are equipped with a full-size, Drive DVD-ROM & CD-R/RW drive module that lets you run CD/DVDs without using an adaptor. It reads DVD-ROM's at maximum 8 speed and CD-ROM's at maximum 24 speed. It writes CD-R's at up to 24 speed and CD-RW's at up to 24 speed.
Introduction CD-ROM Drive Some models are supplied with a full size CD-ROM drive, that lets you play CD-ROMs without using an adaptor. CD-ROMs are read at a maximum speed of 24x. The drive supports the following formats: ■ CD-Text ■ CD-Audio ■ CD-i ■ Video CD ■ Photo CD™ (Single/Multi Session) ■ CD ROM Mode 1, Mode 2 ■ CD-ROM XA Mode 2 (Form 1, Form 2) ■ Enhanced CD (CD-Extra) Display The computer's LCD panel supports high-resolution video graphics.
Introduction Universal Serial Bus (USB 2.0) The computer has two Universal Serial Bus ports that comply with the USB 2.0 standard, which enables data transfer speeds 40 times faster than the USB 1.1 standard. (The ports also support USB 1.1.) Slots PC Card Depending on the model you purchased: The PC Card slot accommodates Type II card. Multimedia Sound System A Windows® Sound System compatible sound system provides speakers as well as jacks for an external microphone and headphones.
Introduction Wireless LAN The Wireless LAN feature is not available on all models. Where present, it supports the B and G standard but it is compatible with other LAN systems based on Direct Sequence Spread Spectrum / Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE 802.11 Standard. ■ Automatic Transmit Rate Select mechanism in the transmit range of 54, 48, 36, 24, 18, 12, 9 and 6 Mbit/s. (IEEE 802.
Introduction User’s Manual Hot Keys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program. Keypad Overlay A ten-key pad is integrated into the keyboard. Refer to the Keypad overlay section in Chapter 5, The Keyboard, for instructions on using the keypad overlay. Power On Password (Depends on the model you purchased.
Introduction User’s Manual Intelligent Power Supply A microprocessor in the computer's intelligent power supply detects the battery’s charge and calculates the remaining battery capacity. It also protects electronic components from abnormal conditions, such as voltage overload from an AC adaptor. To monitor remaining battery, check Battery remaining on TOSHIBA Power Saver. Battery Save Mode This feature lets you save battery power.
Introduction Hibernation This feature lets you turn off the power without exiting from your software. The contents of main memory are saved to the hard disk so that when you turn on the power again, you can continue working right where you left off. Refer to the Turning off the power section in Chapter 3, Getting Started,for details. Standby If you have to interrupt your work, you can turn off the power without exiting from your software.
Introduction TOSHIBA Zooming Utility (Depends on the model you purchased.) This utility allows you to enlarge or reduce the icon size on the desktop or the application window. To run TOSHIBA Zooming Utility, click start, select All Programs followed by TOSHIBA followed by Utilities and then click Zooming Utility.
Introduction TOSHIBA Touch and Launch (Depends on the model you purchased.) TOSHIBA Touch and Launch is a tool that allows you to perform various tasks easily using the TouchPad. TOSHIBA Touch and Launch is useful in the following conditions. ■ To open a file located on the desktop whose icon is obscured by a window. ■ To open a page contained in the Internet Explorer Favorites menu. ■ To display the list of currently open windows and change the active window.
Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer's front with its display panel in the closed position.
The Grand Tour Battery The Battery indicator shows the condition of the battery's charge: Green indicates a full charge, orange indicates that the battery is charging and flashing orange indicates a low battery charge. Refer to Chapter 6, Power and Power-Up Modes. Built-in HDD/ODD The Built-in HDD/ODD indicator glows green when the computer accesses the hard disk drive or optical disc drive. Wireless Communication Switch (optional) The Wireless Communication Switch turns on the wireless LAN.
The Grand Tour External Monitor Port This 15-pin port lets you connect an external video display. The Analog VGA port supports VESA DDC2B compatible functions. (Depends on the model you purchased.) Cooling Vents Cooling vents help prevent the CPU from overheating. Do not block the cooling vents. Also ensure that foreign objects are kept out of the vents as items such as pins or similar objects, which can damage the computer's circuitry. User’s Manual Universal Serial Bus (USB 2.
The Grand Tour Right side The following figure shows the computer's right side. ODD Indicator Eject Button Emergency Eject Hole The right side of the computer ODD Indicator The ODD indicator glows amber when the computer accesses the optical disc drive. Eject Button Press this button to open the ODD tray. Emergency Eject Hole In the event that the disc drive becomes inexplicably locked or stops responding press this button to force a manual ejection of the ODD tray.
The Grand Tour Universal Serial Bus (USB 2.0) port The Universal Serial Bus port complies with the USB 2.0 standard, which enables data transfer speeds 40 times faster than the USB 1.1 standard (The ports also support USB 1.1). Keep foreign objects out of the USB connectors. A pin or similar object can damage the computer's circuitry. Operation of all functions of all USB devices has not been confirmed. As such, some untested thirdparty devices may not function properly.
The Grand Tour Hard Disk Cover This cover protects the hard disk. Battery Release Lock Slide this lock to prepare the battery pack for (1) removal. Battery Pack The battery pack powers the computer when the AC adaptor is not connected. For detailed information on the battery pack, refer to Chapter 6, Power and Power-Up Modes. Battery Release Latch Slide and hold this latch to release the battery (2) pack for removal.
The Grand Tour Power Button Turns the computer on and off as well as putting it into Hibernation mode and waking it up from Stand by mode. Display Screen The LCD displays high-contrast text and graphics. Refer to Appendix B, Display Controller and Modes. When the computer operates on the AC adaptor the display screen’s image will be somewhat brighter than when it operates on battery power. The lower brightness level is intended to save battery power.
The Grand Tour CDs ■ CD-R discs can be written only once. The recorded data cannot be erased or changed. ■ CD-RW discs can be recorded more than once. Use either 1, 2, or 4 multi speed CD-RW discs or high-speed 4- to 10-speed discs. The write speed of the ultra-speed CD-RW discs (Ultra-speed is available on the DVD-ROM & CD-R/RW drive only) is a maximum of 24-speed.
The Grand Tour DVD Super Multi drive (Supporting DVD±R Double Layer) The full-size DVD Super Multi drive module lets you record data to writable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the centre of a disc and faster at the outer edge.
The Grand Tour ■ Use only the AC adaptor that came with the computer or an equivalent optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. ■ Use only the AC Adaptor supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adaptor or other types of AC Adaptors may have a different voltage which could cause damage to your computer, computer failure and/or possible data loss.
Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space - for your health and safety Be sure also to read the Instruction Manual for Safety and Comfort. This guide, which is included with the computer, explains product liability.
Getting Started Setting up your work space Establishing a comfortable work site is important for you and your computer. A poor work environment or stressful work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints. Proper ambient conditions should also be maintained for the computer's operation.
Getting Started Placement of the computer Position the computer and peripheral devices to provide comfort and safety. ■ Set the computer on a flat surface at a comfortable height and distance. ■ The display should be no higher than eye level to avoid eyestrain. ■ Place the computer so that it is directly in front of you when you work and make sure you have adequate space to easily operate other devices. ■ Allow adequate space behind the computer to let you freely adjust the display.
Getting Started Lighting Proper lighting can improve legibility of the display and reduce eyestrain. ■ Position the computer so that sunlight or bright indoor lighting does not reflect off the screen. Use tinted Windows, shades or other screen to eliminate sun glare. ■ Avoid placing the computer in front of bright light that could shine directly in your eyes. ■ If possible, use soft, indirect lighting in your computer work area.
Getting Started Installing the battery pack To install a battery, follow the steps below. ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.
Getting Started Connecting the AC adaptor Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power. The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes.
Getting Started 2. Connect the AC adaptor's DC output plug to the DC IN 19V jack on the back of the computer. Connecting the adaptor to the computer 3. Plug the power cord into a live wall outlet. Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer to the right. 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel.
Getting Started Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Windows® XP setup. Press and hold the computer's power button for two or three seconds. Turning on the power Windows® XP setup When you first turn on the power, the computer's initial screen is the Microsoft® Windows® XP Startup Screen Logo. Follow the on-screen directions.
Getting Started Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating system’s main screen. 1. If you have entered data, save it to the hard disk. 2. Make sure all disk (disc) activity has stopped, then remove the CD/ DVDs. Make sure the Built-in HDD/ODD indicators are off.
Getting Started Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits: ■ Saves data to the hard disk when the computer automatically shuts down because of a low battery. For the computer to shut down in Hibernation Mode, the hibernation feature must be enabled in two places in Power Options: Hibernate tab and TOSHIBA Power Saver: Basic Setup tab. Otherwise, the computer will shut down in Standby Mode.
Getting Started Data save in Hibernation Mode When you turn off the power in Hibernation Mode, the computer takes a moment to save current memory data to the hard disk. During this time, the disk indicator will light. After you turn off the computer and memory is saved to the hard disk, turn off the power to any peripheral devices. Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.
Getting Started Entering Standby Mode You can enter Standby Mode in one of three ways: 1. Click Start, click Turn Off Computer and click Stand by. 2. Close the display panel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility. 3. Press the power button. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility. When you turn the power back on, you can continue where you left when you shut down the computer.
Getting Started Restoring the preinstalled software If the preinstalled files are damaged, use the Product Recovery DVD-ROM to restore them. To restore the operating system and all preinstalled software, follow the steps below. Restoring the Windows operating system When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. 1. Load the Recovery DVD-ROM in the optical media drive and turn off the computer's power. 2.
Chapter 4 Operating Basics This chapter gives information on basic operations including using the Touch Pad, optical media drive, sound system, modem, the Wireless LAN and LAN. It also provides tips on cleaning and moving your computer. Using the Touch Pad To use the Touch Pad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.
Operating Basics Do not press on the TouchPad too hard or press a sharp object such as a ball point pen against the TouchPad. The TouchPad could be damaged. For some functions, you can tap the Touch Pad instead of pressing a control button. Click: Double-click: Drag and drop: Scroll: Tap the TouchPad once Tap the TouchPad twice 1. Hold down the left control button and move the cursor to drag the item you want to move. 2. Lift your finger to drop the item where you want it.
Operating Basics Loading discs To load a disc, follow the steps below and refer to the figures. 1. a. When the power is on, press the eject button to open the drawer slightly. Eject Button Pressing the eject button b. Pressing the eject button will not open the drawer when the disc drive's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Operating Basics 2. Grasp the drawer gently and pull until it is fully opened. Pulling the drawer open 3. Place the disc, label side up, in the drawer.
Operating Basics When the drawer is fully opened, the edge of the computer will extend slightly over the disc tray. Therefore, you will need to turn the disc at an angle when you place it in the tray. After seating the disc, however, make sure it lies flat, as shown in the figure above. ■ Do not touch the laser lens. Doing so could cause misalignment. ■ Keep foreign matter from entering the drive. Check the back edge of the tray to make sure it carries no debris before closing the drive. 4.
Operating Basics Removing discs To remove the disc, follow the steps below and refer to the figure. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical media drive indicator to go out before you open the drawer. Also, if the disc is spinning when you open the drawer, wait for it to stop before you remove it. 1. To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened.
Operating Basics Writing CDs with the DVD-ROM & CD-R/RW drive Depending on the type of drive installed, you may be able to write CDs. The DVD-ROM & CD-R/RW drive lets you read DVD-ROMs and CDs as well as write CD-R/RW. Observe the precautions in this section to ensure the best performance for writing CDs. For information on loading and unloading CDs refer to the Using optical media drive section. CD-R discs can be written only once. CD-RW discs can be rewritten many times.
Operating Basics ■ Do not run software such as a screen saver which can put a heavy load on the CPU. ■ Operate the computer at full power. Do not use power-saving features. ■ Do not write while virus check software is running. Wait for it to finish, then disable virus detection programs including any software that checks files automatically in the background. ■ Do not use hard disk utilities, including those intended to enhance HDD access speed. They may cause unstable operation and damage data.
Operating Basics ■ Damage that may be caused by using third party equipment or software. Given the technological limitations of current optical disc writing drives, you may experience unexpected writing or rewriting errors due to disc quality or problems with hardware devices. Also, it is a good idea to make two or more copies of important data, in case of undesired change or loss of the recorded contents.
Operating Basics DVD-R(DL): MITSUBISHI KAGAKU MEDIA CO, LTD. DVD+R: MITSUBISHI KAGAKU MEDIA CO, LTD. Ricoh Co., Ltd. DVD+R(DL): MITSUBISHI KAGAKU MEDIA CO, LTD. DVD-RW: DVD Specifications for Recordable Disc for Version 1.1 or 1.2 Victor Company of Japan, Ltd. (JVC) MITSUBISHI KAGAKU MEDIA CO, LTD. DVD+RW: MITSUBISHI KAGAKU MEDIA CO, LTD. DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0, 2.1 or 2.2 Hitachi Maxell Ltd. Matsushita Electric Industrial Co., Ltd.
Operating Basics ■ Since the disc is based on the DVD standard, it might be filled with dummy data if the written data is less than about 1 GB. Even if you write only a small amount of data, it might take time to fill in the dummy data. ■ DVD-RAM formatted by FAT32 cannot be read in Windows® 2000 without DVD-RAM Driver Software. ■ When multiple drives that can write data to discs are connected, be careful not to write to the wrong drive. ■ Be sure to connect the AC adaptor before you write or rewrite.
Operating Basics ■ Set the computer on a level surface and avoid places subject to vibration such as airplanes, trains, or cars. Do not use an unstable surface such as a stand. ■ Keep mobile phones and other wireless communication devices away from the computer. ■ Always copy data from the hard disk drive to the CD-R/-RW, DVD-R/ -RW/-RAM or DVD+R/+RW disc. Do not use cut-and-paste. The original data will be lost if there is a write error.
Operating Basics ■ If you add data to a DVD-R and DVD+R disc that you have already recorded to, you might not be able to read the added data under some circumstances. It cannot be read in 16-bit operating systems, such as Windows 98SE and Windows ME, in Windows NT4 you will need Service Pack 6 or later to read the data, and in Windows 2000 you will need Service Pack 2 or later to read it. Some optical media drives cannot read added data regardless of the operating system.
Operating Basics ■ Do not use any discs that have been formatted with packet writing software other than TOSHIBA Direct Disc Writer. Similarly, do not use any discs that have been formatted with TOSHIBA Direct Disc Writer with any packet writing software other than TOSHIBA Direct Disc Writer. When using a disc you are not familiar with, format it by selecting Full Format before using it. ■ Do not use the Cut & Paste function for files and folders.
Operating Basics ■ Do not run software like a screen saver because it can put a heavy load on the CPU. ■ Do not run communication applications like a modem or a LAN. Media care This section provides tips on protecting data stored on your CD/DVDs. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them: CD/DVDs 1. Store your CD/DVDs in the container they came in to protect them and keep them clean. 2.
Operating Basics Microphone level If you have an external microphone connected, you can change the microphone gain. Follow the steps below. 1. Click start, point to All Programs, point to Accessories, point to Entertainment and click Volume Control. 2. Click Options and point to Properties. 3. Select Realtek HD Audio Input and enable Recording Control, Mic Volume and Stereo Mix. Then click OK. 4. Click options and point to Properties. Select Realtek HD Audio Output and enable Mic Volume and click OK. 5.
Operating Basics 2. The Region Selection icon will appear in the Task Bar. Click the icon with the primary mouse button to display a list of regions that the modem supports. A sub menu for telephony location information will also be displayed. A check will appear next to the currently selected region and telephony location. 3. Select a region from the region menu or a telephony location from the sub-menu.
Operating Basics Connecting To connect the modem cable, follow the steps below. ■ The modular cable that comes with the computer must be used to connect a modem. Connect the end of the modular cable with the core to the computer. ■ In case of a lightning storm, unplug the modem cable from the telephone jack. ■ Do not connect the modem to a digital telephone line. A digital line will damage the modem. 1. Plug one end of the modular cable into the modem jack. 2.
Operating Basics Disconnecting To disconnect the internal modem cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector. 2. In the same way, pull the cable’s other connector out of the computer. Wireless LAN The Wireless LAN feature is not available on all models.
Operating Basics Wireless communication indicator The wireless communication indicator indicates the status of the wireless communication functions. Indicator status Indication Indicator off Wireless communication switch is set to off. Automatic power down because of overheating. Power malfunction Indicator glows Wireless communication switch is on. Wireless LAN is turned on by an application. If you used the Task Bar to disable Wireless LAN, you will need to restart the computer to re-enable it.
Operating Basics Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub. Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer's LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub.
Operating Basics ■ If a CD/DVD is in the drive, remove it. Also make sure the drawer is securely closed. ■ Turn off the power to the computer. ■ Disconnect the AC adaptor and all peripherals before moving the computer. ■ Close the display. Do not pick up the computer by its display panel. ■ Use the carrying case when transporting the computer. ■ When carrying your computer, be sure to hold it securely so that it does not fall or hit anything. ■ Do not carry your computer by holding protruded portions.
Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available.
The Keyboard F1 ... F12 function keys The function keys (not to be confused with Fn) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, keys marked with icons execute specific functions on the computer. Refer to the section, Soft keys: Fn key combinations, in this chapter.
The Keyboard Press Fn + F11 to access the integrated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys. Refer to the Keypad overlay section in this chapter for more information on how to operate these keys. The power on default for both settings is off. Press Fn + F12 to lock the cursor on a specific line. The power on default is off. Hot keys Hot keys let you enable or disable certain features of the computers.
The Keyboard Hibernation: When you press Fn + F4, the computer enters Hibernation Mode. To avoid entering Hibernation Mode unexpectedly, a dialog box appears for verification. However, if you select the check box, it will not appear in the future. Display selection: Press Fn + F5 to change the active display device. When you press these hot keys, a dialog box appears. Only selectable devices will be displayed. Hold down Fn and press F5 again to change the device.
The Keyboard Display resolution selection: Press Fn + spacebar to change the display resolution. Each time when you press these hot keys, the display resolution changes. TOSHIBA Zooming Utility (reduce): To reduce the icon size on the desktop or the application window, press the 1 key while holding down the Fn key. This function is not available on all models.
The Keyboard Windows® special keys The keyboard provides two keys that have special functions in Windows® : Windows® logo key activates the start menu and the other, the application key, has the same function as the secondary mouse button. This key activates the Windows® start menu. This key has the same function as the secondary mouse button. Keypad overlay Your computer's keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one.
The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key. All keys will operate as if the overlay were off. 2. Type upper-case characters by holding Fn + Shift and pressing a character key. 3. Release Fn to continue using the overlay. Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation.
Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Power and Power-Up Modes Table Power conditions Power on Universal AC adaptor not connected Power off (no operation) Battery charge is • Operates above low battery • LED: Battery off trigger point Battery charge is • Operates below low battery • LED: Battery flashes orange trigger point Battery charge is exhausted Computer shuts down No Battery installed • Cannot operates • LED: Battery off Power indicators As shown in the above table, the Battery and Power indicators on the system indicator panel al
Power and Power-Up Modes Power indicator Check the Power indicator to determine the power status: Green Indicates power is being supplied to the computer and the computer is turned on. Blinking orange Indicates power is being supplied to the computer while the computer is in Standby Mode. The indicator turns on for one second and off for two seconds. No light Under any other conditions, the indicator does not light.
Power and Power-Up Modes Battery pack To ensure that the battery pack maintains its maximum capacity, operate the computer on battery power at least once a month until the battery pack is fully discharged. Refer to Extending battery life in this chapter for procedures. If the computer is continuously operated on AC power through an AC adaptor for an extended period, more than a month, the battery may fail to retain a charge.
Power and Power-Up Modes The charge in the RTC battery is getting low or has been exhausted. You will need to set the date and time within the BIOS setup using the following steps: 1. Press F2 key - the BIOS setup screen will be displayed. 2. Set the date in System Date. 3. Set the time in System Time. 4. Press F10 key. Confirmation message will appear. Press Enter key. BIOS setup will terminate and the computer will be rebooted.
Power and Power-Up Modes 4. Never puncture the battery pack with a nail or other sharp object. Never strike it with a hammer or other object. Never step on it. 5. Never try to charge the battery pack in any manner other than that described in the User's manual. Never connect the battery pack to a plug socket or to an automobile’s cigarette lighter socket. It may rupture or ignite. 6.
Power and Power-Up Modes Caution 1. Never continue to use a battery pack after its recharging capacity has become impaired, or after the display of a warning message indicating that the battery pack’s power is exhausted. Continued use of an exhausted or impaired battery pack could cause the loss of data. 2. Never dispose of battery packs with normal trash. Bring them to your TOSHIBA dealer or to another recycling centre to save resources and prevent environmental damage.
Power and Power-Up Modes Procedures To recharge a battery pack while it is installed in the computer, connect the AC adaptor to the DC IN 19V jack and plug the other end into a working outlet. The Battery indicator glows orange when the battery is being charged. Use only the computer connected to an AC power source to charge the battery pack. Never attempt to charge the battery pack with any other charger. Time The following table shows the approximate time required to fully charge a discharged battery.
Power and Power-Up Modes Leaving the AC adaptor connected will shorten battery life. At least once a month, run the computer on battery power until the battery is fully discharged, then recharge the battery. Monitoring battery capacity Remaining battery power can be monitored in TOSHIBA Power Saver. ■ Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time.
Power and Power-Up Modes ■ The condition of the battery terminals. Make sure the battery terminals stay clean by wiping them with a clean dry cloth before installing the battery pack. Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods.
Power and Power-Up Modes Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. The life of the battery pack is generally about 500 recharges. If the Battery indicator flashes orange shortly after fully recharging the battery, the battery pack needs to be replaced. You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source.
Power and Power-Up Modes Installing the battery pack To install a battery, follow the steps below. ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch. 1. 2. 3. 4.
Power and Power-Up Modes Power-up modes The computer has the following power-up modes: ■ Boot Mode: Computer shuts down without saving data. Always save your work before you turn the computer off in boot mode. ■ Hibernation Mode: Data in memory is saved to the hard disk. ■ Standby Mode: Data is maintained in the computer's main memory. Refer also to the sections Turning on the power and Turning off the power in Chapter 3, Getting Started.
Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Password, Display, Boot Priority, Keyboard, LAN, and USB. Accessing HW Setup To run HW Setup, click Start, click Control Panel, click Printers and Other Hardware and select TOSHIBA HW Setup. HW Setup Window The HW Setup window contains the following tabs: General, Password, Display, Boot Priority, Keyboard, USB and LAN.
HW Setup Setup This field displays BIOS Version and date. Password This tab allows you to set or reset the user password for power on. User Password Lets you register a new password or un-register an existing password. Not Registered Un-registers an existing password Registered Register a new password by following the on screen instructions Owner String This blank field is used to display a message when the password field is displayed on startup.
HW Setup Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Standby mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in standby mode. Enabled Enables the Wake-up on Keyboard function. Disabled Disables the Wake-up on Keyboard function (Default). USB USB KB/Mouse/FDD Legacy Emulation Use this option to enable or disable Legacy USB support.
Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■ PC card ■ Memory expansion Power devices ■ Additional battery pack ■ Additional AC adaptor Peripheral devices ■ External monitor Other ■ Security lock PC card The computer is equipped with a PC Card expansion slot that can accommodate one Type II card.
Optional Devices Inserting a PC Card The PC Card connector is located on the left side of the computer. Windows® hot-install feature lets you insert PC Cards while the computer’s power is on. ■ Do not insert a PC Card while the computer is in standby or Hibernation Mode. Some cards might not work properly.
Optional Devices Removing a PC Card ■ Before removing a PC Card, make sure that any applications or system services do not use the card. ■ Be sure to disable the PC Card prior to removing it. Otherwise, the system may be fatally damaged. To remove the PC Card, follow the steps below. 1. Open the Safely Remove Hardware icon on the Task Bar and disable the PC Card. 2. Press the PC Card eject button to extend it. 3. Press the extended eject button to pop the card out slightly. 4.
Optional Devices Memory expansion You can install additional memory in the computer's memory module socket to increase the amount of RAM. This section describes how to install and remove a memory module. ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost. a. The computer is turned on. b. The computer was shut down using the Standby Mode or Hibernation Mode.
Optional Devices Memory Module Cover Removing the memory module cover 6. Lift one side of the insulator sheet and fit the module's connectors into the computer's connectors at about a 45 degree angle. Press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. You can install the main memory module in either slot.
Optional Devices 7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. Slot A 1 2 Slot B Installing the memory module 8. Seat the cover and secure it with the screws. 9. Replace the battery pack as described in Chapter 6, Power and PowerUp Modes. 10. Turn the power on and make sure the added memory is recognized. Open System in the Control Panel and click the General tab.
Optional Devices Latches 1 2 1 Removing the memory module 6. Seat the cover and secure it with screws and replace the battery pack. Additional battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. Refer to Chapter 6, Power and Power-Up Modes.
Optional Devices External monitor An external analog monitor can be connected to the external monitor port on the computer. The computer supports several video modes. Refer to Appendix B, Display Controller and Modes. To connect a monitor, follow the steps below. 1. Turn the computer off. 2. Connect the monitor to the external monitor port. 3. Turn the monitor's power on. 4. Turn the computer on. When you turn on the power, the Windows® Bootup screen (Windows® Logo) appears on the display device.
Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines: ■ Stop immediately when you recognize a problem exists. Further action may result in data loss or damage.
Troubleshooting ■ Make sure all options are set properly in the setup program. ■ Check all cables. Are they correctly and firmly attached? Loose cables can cause signal errors. ■ Inspect all connecting cables for loose wires and all connectors for loose pins. ■ Check that your CD/DVD/CD-RW is correctly inserted. Make notes of your observations and keep them in a permanent error log. This will help you describe your problems to your dealer.
Troubleshooting Software The problems may be caused by your software or disc. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation. These documents usually include a problem solving section or a summary of error messages. Next, check any error messages in the operating system documentation.
Troubleshooting Self test When the computer starts up, the self test will be run automatically, and the following will be displayed: In Touch with Tomorrow TOSHIBA This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program.
Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the Battery indicator. Refer to Chapter 6, Power and Power-Up Modes for more information. Problem Procedure AC adaptor doesn’t power the computer Check the connections. Make sure the cord is firmly connected to the computer and a power outlet. Check the condition of the cord and terminals. If the cord is frayed or damaged, replace it.
Troubleshooting Problem Procedure Unplug the AC adaptor and remove the battery to make sure the terminals are clean. If necessary wipe them with a soft dry cloth dipped in alcohol. Connect the AC adaptor and replace the battery. Make sure it is securely seated. Check the Battery indicator. If it does not glow, let the computer charge the battery for at least 20 minutes.
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard. Problem Procedure Some letter keys produce numbers Check that the numeric keypad overlay is not selected. Press Fn + F11 and try typing again. Output to screen is garbled Make sure the software you are using is not remapping the keyboard. Remapping involves reassigning the meaning of each key. Refer to your software’s documentation.
Troubleshooting CD-RW/DVD-ROM drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a CD/DVD in the drive Make sure the drive’s drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated. It should lie flat with the label facing up. A foreign object in the drawer could block laser light from reading the CD/DVD. Make sure there is no obstruction. Remove any foreign object.
Troubleshooting Problem Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. ■ Do not run or start other software during writing. ■ Do not jar the computer during writing. ■ Do not connect/disconnect external devices or install/remove internal cards during writing.
Troubleshooting Problem Procedure Some CD/DVDs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware not configuration matches your software's needs. Check the CD/DVDs documentation. Check the type of CD/DVD you are using.
Troubleshooting Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. Touch Pad Problem Procedure On-screen pointer does The system might be busy. If the pointer is shaped as an hourglass, wait for it to return to its not respond to Pad normal shape and try again to move it. operation User’s Manual Double-tapping does not work Try changing the double-click speed setting in the mouse control utility. 1.
Troubleshooting USB mouse Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to mouse shaped as an hourglass, wait for it to resume its normal shape and try again to move it. operation Make sure the mouse is properly connected to the USB port. Double-clicking does not work Try changing the double-click speed setting in the mouse control utility. 1. Open the Control Panel, select the Printers and Other Hardware icon, and press Enter. 2.
Troubleshooting Memory expansion Refer also to Chapter 8, Optional Devices, for information on installing memory modules. Problem Procedure The computer hangs up Make sure the memory module installed in the expansion slot is compatible with the computer. If an incompatible module has been installed, follow the steps below. 1. Turn off the power. 2. Disconnect the AC adaptor and all peripheral devices. 3. Remove the battery pack. 4. Remove the memory module. 5.
Troubleshooting Problem Procedure Display error occurs Check that the cable connecting the external monitor to the computer is attached firmly. If problems persist, contact your dealer. Problem Procedure Communication software can’t initialize modem Make sure the computer's internal modem settings are correct. Refer to Phone and Modem Properties in the Control Panel.
Troubleshooting LAN Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub. If problems persist, consult your LAN administrator. Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Procedure Cannot access Wireless Make sure the computer's wireless LAN communication switch is set to on.
Appendix A Specifications This appendix summarizes the computer's technical specifications. Physical Dimensions Weight 2.3kg-2.7kg * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected. Size 358 (w) × 262 (d) × max. 37.0/min. 28.
Specifications Built-in Modem Network control unit (NCU) Type of NCU AA Type of line Telephone line (analog only) Type of dialling Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer's speaker Communication specifications Communication System Data: Fax: Communication protocol Data ITU-T-Rec (Former CCITT) Bell Fax: ITU-T-Rec (Former CCITT) Communication Speed User’s Manual Full duplex Half duplex V.21/V.22/V.22bis/V.32/ V.32bis/V.34/V.90/V.92 103/212A V.17/V.
Specifications User’s Manual Transmitting level -10 dBm Receiving level -10 to -40 dBm Input/output impedance 600 ohms ±30% Error correcting MNP class 4 and ITU-T V.42 Data compression MNP class 5 and ITU-T V.42bis Power supply +3.
Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular picture elements (pels) on or off. The controller is an advanced Video Graphics Array (VGA) that provides Graphics Array (XGA) support for the internal LCD and external monitors. The following is available: ■ 14.1" and 15.
Display Controller and Modes Video modes The computer supports video modes defined in the tables below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on mode type, resolution, character matrix, number of colors and refresh rates. Also, if your software supports both graphics and text modes, the screen display may appear to operate faster using a text mode.
Display Controller and Modes Table 1: Video modes (VGA) Video mode Type Resolution D VGA Grph 320 × 200 Pels 8×8 16 of 256K 16 of 256K 70 E VGA Grph 640 × 200 Pels 8×8 16 of 256K 16 of 256K 70 F VGA Grph 640 × 350 Pels 8 × 14 Mono Mono 70 10 VGA Grph 640 × 350 Pels 8 × 14 16 of 256K 16 of 256K 70 11 VGA Grph 640 × 480 Pels 8 × 16 2 of 256K 2 of 256K 60 12 VGA Grph 640 × 480 Pels 8 × 16 16 of 256K 16 of 256K 60 13 VGA Grph 320 × 200 Pels 8×8 256 of 256K 256 o
Display Controller and Modes Table 2: Video modes Resolution LCD colors CRT colors Vertical frequency (Hz) 800 × 600 256K/256K 256K/256K 60 75 85 100 1024 × 768 256K/256K 256K/256K 60 75 85 100 1280 × 800 256K/256K 256K/256K 60 75 85 100 1280 × 1024 256K/256K (Virtual) 256K/256K 60 75 85 100 1600 × 1200 256K/256K (Virtual) 256K/256K 60 75 85 100 1920 × 1440 256K/256K (Virtual) 256K/256K 60 75 2048 × 1536 256K/256K (Virtual) 256K/256K 60 Some modes are not supported at LCD+CR
Display Controller and Modes Table 2: Video modes (continued) Resolution LCD colors CRT colors Vertical frequency (Hz) 800 × 600 64K/64K 64K/64K 60 75 85 100 1024 × 768 64K/64K 64K/64K 60 75 85 100 1280 × 800 64K/64K 64K/64K 60 75 85 100 1280 × 1024 64K/64K (Virtual) 64K/64K 60 75 85 100 1600 × 1200 64K/64K (Virtual) 64K/64K 60 75 85 100 1920 × 1440 64K/64K (Virtual) 64K/64K 60 75 2048 × 1536 64K/64K (Virtual) 64K/64K 60 Some modes are not supported at LCD+CRT simultaneous m
Display Controller and Modes Table 2: Video modes (continued) Resolution LCD colors CRT colors Vertical frequency (Hz) 800 × 600 16M/16M 16M/16M 60 75 85 100 1024 × 768 16M/16M 16M/16M 60 75 85 100 1280 × 800 16M/16M 16M/16M 60 75 85 100 1280 × 1024 16M/16M (Virtual) 16M/16M 60 75 85 100 1600 × 1200 16M/16M (Virtual) 16M/16M 60 75 85 100 1920 × 1440 16M/16M (Virtual) 16M/16M 60 75 2048 × 1536 16M/16M (Virtual) 16M/16M 60 Some modes are not supported at LCD+CRT simultaneous m
Display Controller and Modes Display Settings 1. You cannot move from the Settings tab of Display Properties to the multi-monitor when you are using the display of the computer and an external CRT display at the same time.
Display Controller and Modes Display Properties (Multiple Monitors) and ATI RADEON XPRESS 200M Series Properties 2. In some cases DVD video playback images may not be displayed when the display of the computer and a CRT display are used at the same. Reduce the resolution, use the display of the computer only, use the CRT display only or set display device in the multi-monitor, then play DVD.
Display Controller and Modes 5. When the LCD (internal liquid crystal display) display mode is selected, the Virtual (Virtual Screen) display mode can be set. However, afterwards, it may not possible to change the screen resolution to more than 1280 × 1024 pixels in Highest (32bit) mode (for example, when you attempt to set the resolution to 1600 × 1200 using the Screen resolution slide bar and then select Highest (32bit) mode from the Color quality drop-down menu).
Appendix C Wireless LAN Card Specifications Form Factor Mini PCI TypeIII Compatibility ■ IEEE 802.11 Standard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The "Wi-Fi CERTIFIED" logo is a certification mark of the Wi-Fi Alliance. Network Operating System ■ Microsoft® Windows® Networking Media Access Protocol ■ CSMA/CA (Collision Avoidance) with Acknowledgement (ACK) Data Rate ■ 54/48/36/24/18/12/9/6 Mb/s (IEEE 802.11g) ■ 11/5.5/2/1 Mb/s (IEEE 802.
Wireless LAN Refer to the sheet "Information to the User" for regulatory information that may apply in your country/region. R-F Frequency ■ Band 2.4GHz (2400~2497 MHz) for 802.11b/g specifications Modulation Technique ■ DSSS-CCK, DSSS-DQPSK, DSSS-DBPSK (IEEE 802.11b) ■ OFDM-BPSK, OFDM-QPSK, OFDM16QAMOFDM-16QAM (IEEE 802.11g) The range of the wireless signal is related to the transmit rate of the wireless communication device. Communications at a lower transmission rate may travel larger distances.
Wireless LAN *1 Factory-set default channels *2 Refer to your Authorized Wireless LAN or TOSHIBA Sales office for information on the countries/regions in which these channels can be used. When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point.
Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.8 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Voltage rating: 125 or 250 VAC (depending on country/region’s power standards) Certification agencies U.S.
AC Power Cord and Connectors In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia and Europe.
Appendix E If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office. Make a note of your computer’s machine type, model number, and serial number, and put it in a safe place.
If your computer is stolen To register the theft online, please follow these procedures: ■ Visit www.toshiba-europe.com on the Internet. In the product area, choose Computer Systems. ■ In the Computer Systems page, open the Support & Downloads menu and choose the Stolen Units Database option. Your entries are used to track your computer at our service points. TOSHIBA Theft Registration Send to: Fax number: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr.
Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
Glossary KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MS-DOS: Microsoft® disk Operating System OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock SCSI: small computer system interface SIO: serial input/output SXGA+: super extended graphics array plus TFT: thin-film transistor UART: universal asynchronous
Glossary ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements. antistatic: A material used to prevent the buildup of static electricity. application: A group of programs that together are used for a specific task such as accounting, financial planning, spread sheets, word processing and games.
Glossary bus: An interface for transmission of signals, data or electric power. byte: The representation of a single character. A sequence of eight bits treated as a single unit; also the smallest addressable unit within the system. C cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory.
Glossary communications: The means by which a computer transmits and receives data to and from another computer or device. See parallel interface; serial interface. compatibility: 1) The ability of one computer to accept and process data in the same manner as another computer without modifying the data or the media upon which it is being transferred. 2) the ability of one device to connect to or communicate with another system or component.
Glossary DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries. default: The parameter value automatically selected by the system when you or the program do not provide instructions. Also called a preset value. delete: To remove data from a disk or other data storage device. Synonymous with erase. device driver: A program that controls communication between a specific peripheral device and the computer. The CONFIG.
Glossary escape: 1) A code (ASCII code 27), signalling the computer that what follows are commands; used with peripheral devices such as printers and modems. 2) A means of aborting the task currently in progress. escape guard time: A time before and after an escape code is sent to the modem which distinguishes between escapes that are part of the transmitted data, and escapes that are intended as a command to the modem. execute: To interpret and execute an instruction.
Glossary hardware: The physical electronic and mechanical components of a computer system: typically, the computer itself, external disc drives, etc. See also software and firmware. hertz: A unit of wave frequency that equals one cycle per second. hexadecimal: The base 16 numbering system composed of the digits 0 through 9 and the letters A, B, C, D, E, and F. host computer: The computer that controls, regulates, and transmits information to a device or another computer.
Glossary J jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys. Each keystroke activates a switch that transmits a specific code to the computer.
Glossary M main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte. megahertz: A unit of wave frequency that equals 1 million cycles per second. See also hertz. menu: A software interface that displays a list of options on the screen. Also called a screen. microprocessor: A hardware component contained in a single integrated circuit that carries out instructions. Also called the central processing unit (CPU), one of the main parts of the computer.
Glossary online state: A functional state of a peripheral device when it is ready to receive or transmit data. operating system: A group of programs that controls the basic operation of a computer. Operating system functions include interpreting programs, creating data files, and controlling the transmission and receipt (input/output) of data to and from memory and peripheral devices. output: The results of a computer operation. Output commonly indicates data.
Glossary R Radio frequency interference (RFI) shield: A metal shield enclosing the printed circuit boards of the printer or computer to prevent radio and TV interference. All computer equipment generates radio frequency signals. The FCC regulates the amount of signals a computing device can allow past its shielding. A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use.
Glossary subpixel: Three elements, one red, one green and blue (RGB), that make up a pixel on the color LCD. The computer sets subpixels independently, each may emit a different degree of brightness. See also pixel. synchronous: Having a constant time interval between successive bits, characters or events. system disk: A disk that has been formatted with an operating system. For MS-DOS the operating system is contained in two hidden files and the COMMAND.COM file.
Index A D AC adaptor, 1-3 additional, 1-12 connecting, 3-6 ASCII characters, 5-7 Display, 1-5 automatic power off, 1-8 brightness decreases, 5-4 brightness increases, 5-4 controller, 1-5 opening, 3-7 Display controller, B-1 DVD Super Multi drive writing, 4-13 B Battery charging, 6-7 extending battery life, 6-10 indicator, 6-1 location, 2-5 Monitoring capacity, 6-9 real time clock, 1-3, 6-4 safety precautions, 6-5 save mode, 1-9 types, 6-3 Battery pack, 1-3 additional, 8-7 replacing, 6-11 C E Environme
Index F L Floppy disk using, 4-2 Fn + Esc (sound mute), 5-3 Fn + F1 (instant security), 5-3 Fn + F2 (power save mode), 5-3 Fn + F3 (standby), 5-3 Fn + F4 (hibernation), 5-4 Fn + F5 (display selection), 5-4 Fn + F6 (Display Brightness decreases), 5-4 Fn + F7 (Display Brightness increases), 5-4 Fn + F8 (Wireless setting), 5-4 Fn + F9 (Touch Pad), 5-4 Fn Sticky key, 5-5 Function keys, 5-2 LAN, 1-6, 4-20 cable types, 4-20 connecting, 4-20 disconnecting, 4-21 Graphics controller, 1-5 Media care, 4-15 CD/DV
Index Problems AC power, 9-5 analyzing, 9-2 Battery, 9-5 CD-RW/DVD-ROM drive, 9-8 DVD Super Multi drive, 9-9 Hard disk drive, 9-7 Hardware and system checklist, 9-3 Keyboard, 9-7 LAN, 9-15 LCD panel, 9-7 Memory expansion, 9-13 Modem, 9-14 Monitor, 9-13 overheating power down, 9-4 PC card, 9-10 Pointing device, 9-11 Power, 9-4 Real Time Clock, 9-6 Self test, 9-4 Sound system, 9-13 Support from TOSHIBA, 9-15 System start-up, 9-3 USB, 9-12 Wireless LAN, 9-15 Processor, 1-2 Sound System, 1-6, 4-15 headphone j
