User’s Manual A100 PMR300118EN0 PMR300118EN0 Choose freedom. Choose freedom. computers.toshiba-europe.com computers.toshiba-europe.
TOSHIBA A100 Series Copyright © 2006 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
TOSHIBA A100 Series Trademarks IBM is a registered trademark, and IBM PC and PS/2 are trademarks of International Business Machines Corporation. Intel, Intel SpeedStep and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries/regions. Windows and Microsoft are registered trademarks of Microsoft Corporation. Photo CD is a trademark of Eastman Kodak. Memory Stick is a registered trademark and i.LINK is a trademark of SonyCorporation.
TOSHIBA A100 Series Safety Instructions Use the following safety guidelines to help protect yourself and your computer. When Using Your Computer Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base. Allowing sustained contact with the skin could cause discomfort or, eventually, a burn. ■ Do not attempt to service the computer yourself.
TOSHIBA A100 Series EU Declaration of Conformity TOSHIBA declares, that the product: PSAA** conforms to the following Standards: This product is labelled with the CE Mark in accordance with the related European Directives, notably Electromagnetic Compatibility Directive 89/ 336/EEC for the notebook and the electronic accessories including the supplied power adapter, the Radio Equipment and Telecommunications Terminal Equipment Directive 99/5/EEC in case of implemented telecommunication accessories and the
TOSHIBA A100 Series Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
TOSHIBA A100 Series Optical disc drive safety instructions The optical disc drive employs a laser system. To ensure proper use of this product, please read the manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. To prevent direct exposure to the laser beam, do not try to open the enclosure.
TOSHIBA A100 Series Manufacturer Type HITACHI-LG Data Storage DVD-ROM&CD-R/RW GCC-4244N Panasonic DVD Super Multi (±R Double Layer) UJ-850B Panasonic DVD Super Multi (±R Double Layer) UJ-841B Pioneer DVD Super Multi (±R Double Layer) DVR-K16TB TEAC DVD Super Multi (±R Double Layer) DV-W28EB HITACHI-LG Data Storage DVD Super Multi (±R Double Layer) GMA-4082N NEC DVD Super Multi (±R Double Layer) ND-7550 Important Notice Copyrighted works including, but not limited to music, video, computer p
Preface Congratulations on your purchase of the TOSHIBA A100 Series computer. This powerful, lightweight notebook computer is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your A100 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
TOSHIBA A100 Series Manual contents This manual is composed of nine chapters, nine appendixes, a glossary, and an index. Chapter 1, Introduction, is an overview of the computer’s features, capabilities, and options. Chapter 2, The Grand Tour, identifies the components of the computer and briefly explains how they function. Chapter 3, Getting Started, provides a quick overview of how to begin operating your computer and gives tips on safety and designing your work area.
TOSHIBA A100 Series Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary. Icons Icons identify ports, dials, and other parts of your computer.
TOSHIBA A100 Series Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read. A note is a hint or advice that helps you make best use of your equipment.
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury, damage to the computer or impared performance. Be certain to read the general precautions below and to note the cautions included in the text of the manual. Stress injury Carefully read the Instruction Manual for Safety & Comfort.
TOSHIBA A100 Series PC card overheating Some PC cards can become hot with prolonged use. Overheating of a PC card can result in errors or instability in the PC card operation. Also be careful when you remove a PC card that has been used for a long time. Mobile phone Use of mobile phones can interfere with the audio system. Computer opreation is not impaired but it is recommended that a distance of 30 cm be maintained between the computer and a mobile phone in use.
TOSHIBA A100 Series Wireless LAN/Atheros For 802.11a, b and g The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed.
TOSHIBA A100 Series LCD Brightness and Eye Strain Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes. Graphics Processing Unit (“GPU”) Performance Disclaimer The graphics processing unit ("GPU") performance may vary depending on product model, design configuration, applications, power management settings and features utilized.
Table of Contents Preface General Precautions Chapter 1 Introduction Equipment checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11 Options . . .
Chapter 4 Operating Basics Using the Touch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Connecting 3 1/2" diskette drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Disconnecting 3 1/2" diskette drive . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Using optical media drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 AV Button function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 8 Optional Devices PC cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Additional battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Additional AC adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB FDD Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1 Introduction This chapter provides an equipment checklist, and it identifies the computer’s features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not pre- installed by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
Introduction Software Windows XP Professional/Home Edition Service Pack 2 The following software is preinstalled: ■ Microsoft® Windows XP Home Edition or Professional Edition ■ Microsoft® Internet Explorer ■ Modem Driver ■ Network Driver ■ Wireless LAN driver (Can be used only for Wireless LAN models) ■ Display Drivers for Windows ■ Sound Driver for Windows ■ Pointing Device Driver ■ DVD Video Player ■ TOSHIBA Utilities ■ TOSHIBA Power Saver ■ TOSHIBA User’s Manual ■ TOSHIBA Assist ■ TOSHIBA ConfigFree ■ T
Introduction Features The computer uses TOSHIBA’s advanced Large Scale Integration (LSI), Comple-mentary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and benefits: Processor Built-in The computer is equipped with an Intel® Celeron® M processor, on-die 32 KB instruction L1 cache and 1 MB L2 cache memory.
Introduction Disks User’s Manual Hard disk drive The computer has an integrated, 2 1/2" hard disk drive (HDD) for nonvolatile storage of data and software. It comes in the following sizes. 40.0 GB (37.26 billion bytes) 60.0 GB (55.89 billion bytes) 80.0 GB (74.52 billion bytes) 100.0 GB (93.15 billion bytes) 120.0 GB (111.78 billion bytes) Diskette drive 3 1/2" 1.44-megabyte or 720-kilobyte connects to the USB port. (Windows® XP does not support 720-kilobyte diskettes.
Introduction DVD Super Multi (+-R Double Layer) drive User’s Manual Some models are equipped with a full-size DVD Super Multi (+- R Double Layer) drive module that lets you record data to rewritable CD/DVDs as well s run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor.
Introduction Display The computer’s LCD panel supports high-resolution video graphics. The screen can be set at a wide range of viewing angles for maximum comfort and readability. Built-in Thin-film transistor color LCD is available in four sizes: 15.0" XGA, 1024 horizontal × 768 vertical pixels 15.0" XGA-CSV, 1024 horizontal × 768 vertical pixels 15.4" WXGA, 1280 horizontal × 800 vertical pixels 15.
Introduction Ports (depending on configuration) Headphone Enables connection of a stereo headphone. Microphone Enables connection of a monaural microphone. External monitor 15-pin, analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus (USB 2.0) Universal Serial Bus (USB) enables chain connection of a number of USB-equipped devices to one port on your computer. i.
Introduction LAN The computer is equipped with a LAN card that supports Ethernet LAN (10 Mbit/s, 10BASE-T), Fast Ethernet LAN (100 Mbit/s, 100BASE-TX) or Giga-bit. It is preinstalled as a standard device in some markets. (depend on model you purchased).
Introduction Software Operating System Windows® XP Professional or Home Edition is available. Refer to the preinstalled software section at the front of this chapter. TOSHIBA Utilities A number of utilities and drivers are preinstalled to make your computer more convenient to use. Refer to the Utilities section in this chapter.
Introduction User’s Manual Keypad overlay A ten-key pad is integrated into the keyboard. Refer to the Keypad overlay section in Chapter 5, The Keyboard, for instructions on using the keypad overlay. Power on password Two levels of password security, supervisor and user, are available to prevent unauthorized access to your computer. Instant security A hot key function blanks the screen and disables the computer providing data security.
Introduction Hibernation This feature lets you turn off the power without exiting from your software. The contents of main memory are saved to the hard disk, when you turn on the power again, you can continue working right where you left off. Refer to the Turning off the power section in Chapter 3, Getting Started, for details. Standby If you have to interrupt your work, you can turn off the power without exiting from your software. Data is maintained in the computer’s main memory.
Introduction User’s Manual DLA for TOSHIBA DLA (Drive Letter Access) is the packet writing software which provides the function which writes files and/or folders to DVD+RW, DVD-RW or CD-RW disc via a drive letter like a floppy disk or other removable disks. TOSHIBA PC Diagnostic Tool TOSHIBA PC Diagnostic Tool displays the basic information on PC, and the test of built-in devices can also be performed.
Introduction TOSHIBA Controls This utility lets you customize Internet button and CD/DVD button: you can assign applications or several actions to these buttons (Internet default browser and CD/DVD are assigned to each button by default). TOSHIBA Vitrtual Sound TOSHIBA Virtual Sound works as the audio filter using SRS TruSurround XT SRS WOW HD and SRS Circle Surround Xtract functions procided by SRS labs, Inc. in United States.
Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. An asterisk * indicates a optional feature that is dependant on the model purchased. Front with the display closed The figure below shows the computer’s front with its display panel in the closed position.
The Grand Tour Headphone jack A standard 3.5 mm mini headphone jack enables connection of a stereo headphone (16 ohm minimum) or other device for audio output. When you connect headphones, the internal speaker is automatically disabled. Volume control Use this dial to adjust the volume of the system speaker and headphones. System Indicators Four LEDs let you monitor the DC IN, Power status, Main battery and Disk. Details are in the System indicators sections.
The Grand Tour When multiple IEEE1394 devices are connected to a PC, the devices may not correctly be identified. This problem may occur when Windows® XP is restarted while the devices are connected or when the power to the IEEE1394 devices is turned on before the PC is turned on. If it occurs, disconnect the IEEE1394 cables and then reconnect. Right side The figure below shows the computer’s right side.
The Grand Tour Security lock slot A security cable attaches to this slot. The optional security cable anchors your computer to a desk or other large object to deter theft. Modem jack In areas where an internal modem is installed as standard equipment, there is a modem jack that lets you use a modular cable to connect the modem directly to a telephone line. The modem is not supported in some marketing regions. Back side The figure below shows the computer’s back side.
The Grand Tour Underside The figure below shows the underside of the computer. Make sure the display is closed before turning over your computer. Battery pack Battery pack lock Battery Release Latch Memory module cover The underside of the computer * The availability of this feature is dependant on the model you purchased. Battery pack The battery pack powers the computer when the AC adaptor is not connected.
The Grand Tour Front with the display open The figure below shows the front of the computer with the display open. To open the display, slide the display latch on the front of the computer and lift the display up. Position the display at a comfortable viewing angle.
The Grand Tour Stereo Speaker The speaker emits sound generated by your software as well as audio alarms, such as low battery condition, generated by the system. Power button Press the power button to turn the computer’s power on or off. The Power button LED indicates the status. Touch Pad Moves the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling, selecting, and double-clicking.
The Grand Tour STOP Press this button to stop play. Previous button Press this button to advance to the previous track, chapter or data. Next button Press this button to advance to the next track, chapter or data. System indicators Figure below shows the system indicators, which light when various computer operations are in progress. Disk Main battery DC IN Power Systems indicators User’s Manual DC IN The DC IN indicator glows green when DC power is supplied from the AC power adaptor.
The Grand Tour Keyboard indicators The figures below show the positions of the keypad overlay indicators and the CapsLock indicator. When the F10 key indicator glows the keypad overlay lets you enter numbers. When the F11 key indicator glows the keypad overlay lets you control the cursor. Numeric mode Arrow mode Keypad overlay indicators Arrow mode When the Arrow mode indicator lights green, you can use the keypad overlay (white labeled keys) as cursor keys.
The Grand Tour USB diskette drive A 3 1/2" diskette drive accommodates 1.44-megabyte or 720-kilobyte diskettes. It connects to the USB port. Disk-In-Use Indicator Diskette slot Eject button USB diskette drive Disk-In-Use Indicator This indicator lights when the diskette is being accessed. Diskette slot Insert diskette in this slot. Eject button When a diskette is fully seated in the drive, the eject button pops out.
The Grand Tour Optical Media drive The computer is equipped with one of the following optical media drives: ■ CD/RW/DVD ROM drive ■ DVD Super Multi (+-R Double Layer) drive. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD, an indicator on the drive glows. Region codes for DVD drives and media CD-RW/DVD-ROM and DVD Super Multi (+-R Double Layer) drive and media are manufactured according to the specifications of six marketing regions.
The Grand Tour Formats CD-RW//DVD-ROM drive The full-size, CD-RW/DVD-ROM drive module lets you record data to a rewritable CD as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor.
The Grand Tour DVD Super Multi (+-R Double Layer) drive The full-size DVD Super Multi (+-R Double Layer) drive module lets you record data to a rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor.
The Grand Tour AC adaptor The AC adaptor converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any region. To recharge the battery, simply connect the AC adaptor to a power source and the computer. See Chapter 6, Power and Power-Up Modes for details.
Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space — for your health and safety Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.
Getting Started Setting up your work space Establishing a comfortable work site is important for you and your computer. A poor work environment or stressful work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints. Proper ambient conditions should also be maintained for the computer’s operation.
Getting Started ■ If you use a paper holder, set it at about the same height and distance as the computer. Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Refer to the following tips and to figure below. Below eye level 90° angles Foot rest Posture and positioning of the computer ■ Place your chair so that the keyboard is at or slightly below the level of your elbow.
Getting Started Work habits A key to avoiding discomfort or injury from repetitive strain is to vary your activities. If possible, schedule a variety of tasks into your work day. If you must spend long periods at the computer, finding ways to break up the routine can reduce stress and improve your efficiency. ■ Sit in a relaxed posture. Good positioning of your chair and equipment as described earlier can reduce tension in your shoulders or neck and ease back strain. ■ Vary your posture frequently.
Getting Started Connecting the AC adaptor Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power. The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes.
Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer to the right to unlatch the display panel. 2. Lift the panel up and adjust it to the best viewing angle for you. When you open the display, hold it with both hands and lift up slowly. Display latch Opening the display panel Turning on the power This section describes how to turn on the power.
Getting Started Starting up for the first time When you first turn on the power, the computer’s initial screen is the Microsoft Windows® XP Startup Screen Logo. Follow the on-screen directions. Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode, no data is saved and the computer will boot to the operating system’s main screen. 1.
Getting Started Benefits of hibernation The hibernation feature provides the following benefits: ■ Saves data to the hard disk when the computer automatically shuts down because of a low battery. For the computer to shut down in Hibernation Mode, this feature must be enabled in two places: the Hibernate tab in Power Options and Setup Action tab in TOSHIBA Power Saver.
Getting Started Data save in hibernation mode When you turn off the power in hibernation mode, the computer takes a moment to save current memory data to the hard disk. During this time, the Built-in HDD indicator will light. After you turn off the computer and memory is saved to the hard disk, turn off the power to any peripheral devices. Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.
Getting Started 3. Press the power button. This feature must be enabled. Refer to theSetup Action tab in Power Saver Utility described in the Control Panel. In Windows® XP, open Performance and Maintenance and open TOSHIBA Power Saver. When you turn the power back on, you can continue where you left when you shut down the computer. ■ When the computer is shut down in standby mode, the power indicator glows orange.
Getting Started Restoring the preinstalled software from the Product Recovery Media If preinstalled files are damaged, use the Product Recovery Media to restore them. To restore the operating system and all preinstalled software, follow the steps below. When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. 1. Load the Recovery Media in the optional optical media drive and turn off the computer's power. 2. Hold down the F12 key and turn on the power.
Chapter 4 Operating Basics This chapter gives information on basic operations including using the Touch Pad, USB diskette drive, optical media drives, the microphone, the internal modem, wireless communication and LAN. It also provides tips on caring for your computer, diskettes and CD/DVDs. Using the Touch Pad To use the Touch Pad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.
Operating Basics Touch Pad Touch Pad Control Buttons Touch Pad and Touch Pad control buttons Connecting 3 1/2" diskette drive To connect the drive, plug the diskette drive connector into a USB port. Refer to the figure below. Make sure the connector is right side up and properly aligned with the socket. Do not try to force the connection, doing so can damage the connecting pins.
Operating Basics Disconnecting 3 1/2" diskette drive When you have finished using the diskette drive, follow the procedures below to disconnect it: 1. Wait for the indicator light to go out to make sure all diskette activity has stopped. If you disconnect the diskette drive or turn off the power while the computer is accessing the drive you may lose data or damage the diskette or the drive. 2. Click the Safely Remove Hardware icon on the system tray. 3. Click Diskette drive. 4.
Operating Basics Loading discs To load CD/DVDs, follow the steps below and refer to figures below. 1. a. When the power is on, press the DVD-ROM eject button to open the drawer slightly. Eject button Pressing the DVD-ROM eject button b. Pressing the eject button will not open the drawer when the DVD-ROM drive’s power is off. If the power is off, you can open the drawer by inserting a slender object (about 1.
Operating Basics 2. Grasp the drawer gently and pull until it is fully opened. Pulling the drawer open 3. Lay the CD/DVD, label side up, in the drawer. Inserting a CD/DVD When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the tray. After seating the CD/DVD, however, make sure it lies flat, as shown in figure above. Do not touch the laser lens. Doing so could cause misalignment.
Operating Basics If the CD/DVD is not seated properly when the drawer is closed, the CD/ DVD might be damaged. Also, the drawer might not open fully when you press the eject button.
Operating Basics Removing discs To remove the CD/DVD, follow the steps below and refer to figure below. Do not press the eject button while the computer is accessing the DVD-ROM drive. Wait for the optical media drive indicator to go out before you open the drawer. Also, if the CD/DVD is spinning when you open the drawer, wait for it to stop before you remove it. 1. To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened.
Operating Basics AV Button function Some models are provided with AV Buttons.This section describes the button function.
Operating Basics Express Media Player Some Models are equipped with the Express Media Player. This is a quick play feature that enables users to perform DVD and CD playback without using Windows. Press F1 to show pop up guide for Express Media Player and this guide available while Express Media Player is active. Express Media Player is available only for the LCD and has the following restrictions: ■ Express Media Player does not support LCD/CRT, DVI, TV, LCD/TV and Multi-Monitor.
Operating Basics The following special media recommended the next manufacturers: ■ Multi-speed and High-speed CD-RW: MITSUBISHI CHEMICAL CORPORATION, RICOH Co., Ltd. ■ Ultra-speed CD-RW: MITSUBISHI CHEMICAL CORPORATION TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.
Operating Basics ■ Set the computer on a level surface and avoid places subject to vibration such as airplanes, trains, or cars. Do not use an unstable surface such as a stand. ■ Keep mobile phones and other wireless communication devices away from the computer. Disclaimer (CD-RW/DVD-ROM drive) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW disc that may be caused by writing or rewriting with this product.
Operating Basics Before writing or rewriting ■ Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM/ +R DL/-R DL disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. CD-R: TAIYOYUDEN CO., LTD. MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. Hitachi Maxell Ltd.
Operating Basics ■ There is only Format 1 supported for DVD-R DL. Therefore you can not do additional writing. If your data is under DVD-R (SL) capacity, it is suggested to use DVD-R (SL) media. ■ You can use DVD-RAM discs that can be removed from a cartridge and DVD-RAM discs designed without a cartridge. You cannot use a disc with a 2.6 GB single-sided capacity or 5.2 GB double-sided capacity.
Operating Basics When writing or rewriting Please observe/consider the following when you write or rewrite to a CD-R/ RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc. ■ Do not perform any of the following actions: ■ Change users in the Windows XP operating system. ■ Operate the computer for any other function, including use of a mouse or Touch Pad, closing/opening the LCD panel. ■ Start a communication application such as a modem. ■ Apply impact or vibration to the PC.
Operating Basics RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: ■ DVD-Video cannot be created using RecordNow!. ■ DVD-Audio cannot be created using RecordNow!. ■ You cannot use RecordNow!’s “Audio CD for Car or Home CD Player” function to record music to the DVD-R/-R DL/-RW or DVD+R/+R DL/ +RW disc. ■ Do not use the “Exact Copy” function of RecordNow! to copy DVD-Video and DVD-ROM with copyright protection.
Operating Basics Data Verification To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data CD/DVD. 1. Click the Options button ( ) on the RecordNow! Assist to open the Options panels. 2. Select the Data in the left-side menu. 3. Mark the Verify data written to the disc after burning check box in the Data Options. 4. Click the OK button.
Operating Basics 6. Click the Advanced tab in the Performance Options window. 7. Click the Change icon in the “virtual memory” section. 8. Select the Custom size button in the Virtual Memory window. 9. Specify much higher values for “Initial size” and “Maximum size”. 10. Click the Set button in the Virtual Memory window. 11. Click the OK button in the Virtual Memory window. How to make a DVD-Video Simplified steps for making a DVD-Video from video data captured from a DV Camcorder: 1.
Operating Basics ■ Do not operate WinDVD Creator immediately after turning on the computer. Please wait until all Disc Drive activity has stopped. ■ When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data. ■ CD recorder, JPEG functions, DVD-Audio, miniDVD, and Video CD functions are not supported in this version. ■ While recording video to DVD or tape, please close all other programs.
Operating Basics ■ Using the Disc Manager, you can edit DVD-VR format on DVD-RAM, DVD+VR format on DVD+RW, and DVD-Video format on DVD-RW. 4. About recorded DVDs. ■ Some DVD-ROM drives for personal computers or other DVD players may not be able to read DVD-R/-R DL/+R/+R DL/-RW/+RW/ -RAM discs. ■ When playing your recorded disc on your computer, please use the WinDVD software application. ■ If you use an over-used rewritable disc, the full formatting might be locked. Please use a brand new disc.
Operating Basics 5. Do not eat, smoke, or use erasers near your diskettes. Foreign particles inside the diskette’s jacket can damage the magnetic surface. 6. Magnetic energy can destroy the data on your diskettes. Keep your diskettes away from speakers, radios, television sets and other sources of magnetic fields. Modem This section describes how to connect and disconnect the internal modem to and from a telephone jack. The internal modem does not support voice functions.
Operating Basics Properties menu Click the icon with the secondary mouse button to display the following menu. The menu list (Windows XP) Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region. Location list for region selection.
Operating Basics Connecting To connect the internal modem cable, follow the steps below. 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a telephone jack. Modem Jack Telephone Jack Connecting the internal modem Do not pull on the cable or move the computer while the cable is connected.
Operating Basics Supported features. It supports the following features: ■ Automatic Transmit Rate Select mechanism in the transmit range of 54, 48, 36, 24, 18, 12, 9 and 6 Mbit/s (Revision A and G, Revision A/B, B/G, A/B/G combo type). ■ Automatic Transmit Rate Select mechanism in the transmit range of 11, 5.5, 2 and 1 Mbit/s (Revision B). ■ Automatic Transmit Rate Select mechanism in the transmit range of 108, 96, 72, 48, 36, 24, 18 and 12 Mbit/s (Turbo mode, Revision A/B/G combo type).
Operating Basics Wireless communication Indicator The wireless communication indicator indicates the status of the wireless communication functions. Indicator status Indication Indicator off Wireless communication switch is set to off. Automatic power down because of overheating. Power malfunction Indicator glows Wireless communication switch is on. Wireless LAN or Bluetooth is turned on by an application.
Operating Basics To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices connected to the computer. 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. LAN Jack Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub. Disconnecting LAN cable To disconnect the LAN cable, follow the steps below.
Operating Basics Moving the computer The computer is designed for rugged durability. However, a few simple precautions taken when moving the computer will help ensure trouble-free operation. ■ Make sure all disk activity has ended before moving the computer. Check the Disk indicator on the computer. ■ If a CD/DVD is in the drive, remove it. Also make sure the drawer is securely closed. ■ Turn off the power to the computer. ■ Disconnect the AC adaptor and all peripherals before moving the computer.
Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are five types of keys: typewriter keys, keypad overlay, function keys, soft keys and cursor control keys.
The Keyboard F1 ... F12 function keys The function keys, not to be confused with Fn, are the 12 keys at the top of your keyboard. These keys are dark gray, but function differently from the other dark gray keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, keys marked with icons execute specific functions on the computer. See the section, Soft keys: Fn key combinations, in this chapter.
The Keyboard Press Fn + F12 (ScrLock) to lock the cursor on a specific line. The power on default is off. Press Fn + Enter to simulate Enter on the enhanced keyboard’s numeric keypad. Press Fn + Ctrl to simulate the enhanced keyboard’s right Ctrl key. Press Fn + Alt to simulate the enhanced keyboard’s right Alt key. Hotkeys Hotkeys (Fn + a function or Esc key) let you enable or disable certain features of the computers. Sound mute: Pressing Fn + Esc in a Windows environment turns sound on or off.
The Keyboard Power save mode: Pressing Fn + F2 changes the power save mode. If you press Fn + F2, the Power Save Mode is displayed in a dialog box. Continue holding down Fn and press F2 again to change the setting. You can also change this setting through the Plugged in or Running on batteries item of the Power Saver Properties window in Power Saver. Standby: When you press Fn + F3, the computer can enter Standby. To avoid entering Standby unexpectedly, a dialog box appears for verification.
The Keyboard Display Brightness: Pressing Fn + F7 increases the display brightness in increments. When you press these hotkeys, the current setting will be displayed for two seconds by a pop-up icon. You can also change this setting through the Screen brightness item of the Basic Setup window in Power Saver. Wireless setting: If your computer has both Bluetooth and wireless LAN functions, you can press Fn + F8 to select which type of wireless communication you want to use.
The Keyboard TOSHIBA Zooming Utility (reduce): To reduce the icon size on the desktop or the application window, press the 1 key while holding down the Fn key. TOSHIBA Zooming Utility (enlarge): To enlarge the icon size on the desktop or the application window, press the 2 key while holding down the Fn key. Fn Sticky key You can use the Toshiba Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and they press an “F number” key.
The Keyboard Keypad overlay Your computer’s keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the center of the keyboard with white letters make up the numeric keypad overlay. The overlay provides the same functions as the numeric keypad on the 101/102-key enhanced keyboard in figure 5-1. Turning on the overlays The numeric keypad overlay can be used for numeric data input or cursor and page control.
The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key. All keys will operate as if the overlay were off. 2. Type uppercase characters by holding Fn + Shift and pressing a character key. 3. Release Fn to continue using the overlay.
Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Power and Power-Up Modes Table Power conditions Power on AC adaptor not connected Battery charge is above low battery trigger point • Operates • LED: Battery off DC IN off Battery charge is below low battery trigger point • Operates • LED: Battery flashes Amber DC IN off Battery charge is exhausted Computer goes into Hibernation or shuts down (depending on the Toshiba power Management Utility Setting) Power off (no operation) No battery installed • No operation • LED: Battery off DC IN off Power i
Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected: Blue Indicates the AC adaptor is connected and supplying proper power to the computer. Amber Indicates a problem with the power supply. Plug the AC adaptor into another outlet. If it still does not operate properly, see your dealer. No light Under any other conditions, the indicator does not light. Power indicator Check the Power indicator to determine the power status.
Power and Power-Up Modes Battery When the AC power cord is not connected, the computer’s main power source is a removable lithium ion battery pack, also referred to in this manual as the battery. You can purchase additional battery packs for extended use of the computer away from an AC power source. The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations.
Power and Power-Up Modes Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance. Safety precautions Mishandling of batteries can cause death, serious injury or property damage.
Power and Power-Up Modes 8. Never expose the battery pack to abnormal shock, vibration or pressure. The battery pack’s internal protective device will fail, causing it to overheat, explode, ignite or leak caustic liquids possibly resulting in death or serious injury. 9. Never let a battery pack become wet. A wet battery pack will overheat, ignite or rupture possibly resulting in death or serious injury. Warning 1.
Power and Power-Up Modes 6. Be sure to monitor the remaining battery power. If the battery pack and real time clock battery discharge completely. Standby and Suspend will not function and data in memory will be lose. Also, the computer might register an incorrect time and date. In this case, connect the AC adaptor to recharge the batteries. 7. Never install or remove the battery pack without first turning off the power and disconnecting the AC adaptor.
Power and Power-Up Modes Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type System on System off Battery pack (4 cell) 8 hours or more 4 hours Battery pack (6 cell) 8 hours or more 4 hours Battery pack (8 cell) 8 hours or more 4 hours RTC battery 24 hours Don’t charge The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer.
Power and Power-Up Modes Monitoring battery capacity Remaining battery power can be monitored in TOSHIBA Power Saver. ■ Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. The computer needs this time to check the battery’s remaining capacity and to calculate the remaining operating time, based on the current power consumption rate and remaining battery capacity. The actual remaining operating time may differ slightly from the calculated time.
Power and Power-Up Modes Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods: Battery pack (4 cell) about 3 days (Standby mode) about 12 days (Shutdown mode) Battery pack (6 cell) about 5 days (Standby mode) about 18 days (Shutdown mode) Battery pack (8 cell) about 6 days (Standby mode) about 26 days (Shutdown mode) RTC battery about 55 days Extending battery life To maximize the life of you
Power and Power-Up Modes Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. If the Battery indicator flashes amber shortly after fully recharging the battery, the battery pack needs to be replaced. You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source. This section explains how to remove and install battery packs.
Power and Power-Up Modes 6. Slide the battery release latch to free the battery pack for removal, then lift up the battery pack. Battery Pack Lock Battery Release Latch Battery Pack Removing the battery pack 7. Pull the battery pack forward to remove it. For environmental reasons, do not throw away a spent battery pack. Please return spent battery pack to your TOSHIBA dealer. Installing the battery pack To install a battery pack, follow the steps below.
Power and Power-Up Modes Starting the computer by password To start up the computer with the user password, follow these steps: 1. Turn on the power as described in Chapter 3, Getting Started. The following message appears: Enter Password [ ] At this point, the hotkeys Fn + F1 to F9 do not work. They will function after you enter the password. 2. Enter the password. 3. Press Enter. If you enter the password incorrectly three times in a row, the computer shuts off.
Chapter 7 HW Setup and Passwords This chapter explains how to use TOSHIBA HW Setup program to configure your computer and how to set passwords. HW Setup TOSHIBA HW Setup lets you configure settings for display, boot priority, keyboard, USB, LAN, general and password. If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer.
HW Setup and Passwords OK Accepts your changes and closes the HW Setup window. Cancel Closes the window without accepting your changes. Apply Accepts all your changes without closing the HW Setup window. General This window displays the BIOS version and contains two buttons: Default and About. Default Return all HW Setup values to the factory settings. About Display the HW Setup version. Setup This field displays BIOS Version and date.
HW Setup and Passwords If the character strings does not match, the message Entry Error!!! appears. Repeat the procedure from step 1. To delete a user password: 1. Select Not Registered to display the following prompt: Enter Password: 2. Enter the currently registered password. The character string you enter is displayed as a string of asterisks. Enter Password: **** If you click the OK button before entering the password, Registered will appear on the display. 3. Click the OK button.
HW Setup and Passwords U Selects the USB floppy disk drive. N Selects the Network. C Selects optical device. FDD is looked, when the boot disk is contained in external hard disk drive. To select the boot drive you want, follow the steps below. 1. Boot-up your computer and press F12 to enter the boot menu. 2. The boot select screen will be displayed: Hard Disk Drive, CD/DVD, FDD, and LAN. 3. Use the cursor keys to highlight the boot device you want and press Enter.
Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility.
Optional Devices PC cards The computer is equipped with a PC card expansion slot that can accommodate one 5 mm Type II card. Any PC card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC cards, including PC card 16’s multifunction card and CardBus PC cards. CardBus supports the new standard of 32-bit PC cards. The bus provides superior performance for the greater demands of multimedia data transmission.
Optional Devices 2. Press the eject button of the PC card you want to remove to extend the button. 3. Press the extended eject button to pop the card out slightly. 4. Grasp the PC card and remove it. PC card Eject button Removing the PC card Memory expansion You can install additional memory in the computer’s memory module to increase the amount of RAM.
Optional Devices ■ If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. ■ Do not try to install a memory module with the computer turned on or turned off in Standby and Hibernation mode. You can damage the computer and the memory module. ■ If you install a memory module that is not compatible with the computer, a beep will sound when you turn on the power.
Optional Devices Inserting the memory module 8. Seat the cover and secure it with one screw. 9. When you turn the computer on, it should automatically recognize the total memory capacity. Use the HW Setup program to verify that the added memory is recognized. If it is not recognized, check the module’s connection. Removing memory module To remove the memory module, make sure the computer is in boot mode then: 1. Turn the computer off and remove all cables connected to the computer.
Optional Devices Removing the memory module 7. Seat the cover and secure it with one screw. Additional battery pack You can increase the portability of the computer with additional battery packs (6 Cell: PA3465U-1BAS/PA3465U-1BRS and 8 Cell: PA3457U1BAS/PA3457U-1BRS). If you’re away from an AC power source, you can replace a low battery with a fully charged one. See Chapter 6, Power and Power-Up Modes.
Optional Devices If an external monitor is connected to the computer, do not connect the Port Replicator. First disconnect the external monitor from the computer then connect the Port Replicator and use its external monitor port. The Resume feature can be used with an external monitor. Simply enable Resume and the computer will maintain the data as it is displayed on the external monitor. 1. Connect the monitor to the external monitor port. 2. Turn the monitor’s power on.
Optional Devices 4. Turn the computer on. i.LINK (IEEE1394) Some models are equipped with a i.LINK. i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as 1. Digital video cameras 2. Hard disk drives 3. MO drives 4. CD-RW drives i.LINK uses a four-pin connector, which does not carry electriccurrent. External devices will need their own power supply. Precautions 1. Make a back-up of your data before transferring it to the computer.
Optional Devices d. Some devices might not support standby or automatic off functions. e. Do not connect or disconnect an i.LINK device while it is using an application or when the computer is automatically shutting it down to save power. Data might be destroyed. f. When multiple IEEE1394 devices are connected to a PC, the devices may not correctly be identified.
Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines: ■ Stop immediately when you recognize a problem exists. Further action may result in data loss or damage.
Troubleshooting ■ Before you attach an external device, turn the computer off. When you turn the computer back on it recognizes the new device. ■ Make sure all options are set properly in the setup program. ■ Check all cables. Are they correctly and firmly attached? Loose cables can cause signal errors. ■ Inspect all connecting cables for loose wires and all connectors for loose pins. ■ Check that your diskette is correctly inserted and that the diskette’s write protect tab is correctly set.
Troubleshooting Software Hardware The problems may be caused by your software or diskette. If you cannot load a software package, the media (usually a diskette) may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation. These documents usually include a problem solving section or a summary of error messages. Next, check any error messages in the OS documentation.
Troubleshooting Self test When the computer starts up, the self-test will be run automatically, and the following will be displayed: In Touch with Tomorrow S TOSHIBA This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system. Depending on how the Boot Priority is set in the Hardware Setup, the computer tries to load first from drive A then from drive C, or first from drive C then from drive A.
Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator. Refer to Chapter 6, Power and Power-Up Modes for more information. Problem Procedure AC adaptor doesn’t power the computer (DC IN indicator does not glow blue) Check the connections. Make sure the cord is firmly connected to the computer and a power outlet. Check the condition of the cord and terminals. If the cord is frayed or damaged, replace it.
Troubleshooting Problem Procedure Check the Battery indicator. If it does not glow, let the computer charge the battery for at least 20 minutes. If the Battery indicator glows after 20 minutes, let the battery continue to charge at least another 20 minutes before turning on the computer. If the indicator still does not glow, the battery may be at the end of its operating life. Replace it. If you do not think the battery is at the end of its operating life, see your dealer.
Troubleshooting LCD panel Apparent LCD problems may be related to the computer’s setup. Refer to Chapter 7, HW Setup and Passwords, for more information. Problem Procedure No display Press hotkeys Fn + F5 to change the display priority, to make sure it is not set for an external monitor. Markings appear on the LCD They might have come from contact with the keyboard, TouchPad or cPad. Try wiping the LCD gently with a clean dry cloth. If markings remain, use LCD cleaner.
Troubleshooting CD-RW//DVD-ROM drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a CD/DVD in the drive Make sure the drive’s drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated. It should lie flat with the label facing up. A foreign object in the drawer could block laser light from reading the CD/DVD. Make sure there is no obstruction. Remove any foreign object.
Troubleshooting Problem Procedure Check whether the DVD is dirty. If it is, wipe it with a clean cloth dipped in water or a neutral cleaner. See the Media care section in Chapter 4 for details on cleaning. Some CD/DVDs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware not configuration matches your software’s needs. Check the CD/DVD’s documentation. Check the type of DVD/CD you are using. Check the region code on the DVD.
Troubleshooting Printer Refer to the troubleshooting and other relevant sections in your printer and software documentation. Problem Procedure Printer does not turn on Check that the printer is connected to an electric outlet. Make sure the outlet is supplying power by plugging in an appliance. Computer/printer do not Make sure the printer is turned on and is online communicate (ready to use). Inspect the cable connecting the printer to the computer for damage. Make sure it is securely connected.
Troubleshooting Problem Procedure The mouse pointer moves too fast or too slow Try changing the speed setting in the mouse control utility. 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Pointer Option tab. 3. Set the speed as instructed and click OK. When the reaction of Touch pad is sensitive to slow Adjust the touch Sensitivity. 1. Open the Control Panel. 2. Click the Printers icon and then the Other Hardware icon. 3. Click the Mouse icon. 4.
Troubleshooting Problem Procedure The mouse pointer moves too fast or too slow Try changing the speed setting in the mouse control utility. 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Pointer Options tab. 3. Set the speed as instructed and click OK. The mouse pointer moves erratically The mouse might be dirty. Refer to your mouse documentations for instructions on cleaning. If problems persist, contact your dealer. PC card Refer also to Chapter 4, Operating Basics.
Troubleshooting Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. Make sure the headphone connection is secure. Check Windows Device Manager. Make sure the sound function is enabled and that settings for I/O address, Interrupt level and DMA are correct for your software and do not conflict with other hardware devices that you may have connected to the computer. If problems persist, contact your dealer.
Troubleshooting Problem Procedure If you are using an operating system that does not support USB, you can still use a USB mouse and/or USB keyboard. If these devices do not work, make sure the USB KB/Mouse Legacy Emulation item in HW Setup is set to Enabled. If problems persist, contact your dealer. Modem Problem Procedure Communication software can’t initialize modem Make sure the computer’s internal modem settings are correct. Refer to Phone and Modem Options in the Control Panel.
Troubleshooting Standby/Hibernation Problem Procedure The system will not enter Standby/ Hibernation Is Windows Media™ Player open? The system might not enter Standby/Hibernation, if Windows Media Player is either playing a selection or finished playing a selection. Close Windows Media Player before you select Standby/ Hibernation. If problems persist, contact your dealer. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN HUB.
Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first. Before contacting TOSHIBA, try the following: ■ Review troubleshooting sections in the documentation for software and peripheral devices.
Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Size With TFT display 360 (w) × 267 (d) × 29.8 (front) / 36.8 (rear) millimeters Weight (typical*) < 3 kilograms, configured with: 15.4" panel, DVD Combo drive, 6-cell battery, and modem. * Weight will vary depending on whether or not and what kind of options are adopted.
Specifications Built-in Modem Network control unit (NCU) Type of NCU AA Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications User’s Manual Communication System Data: Fax: Full duplex Half duplex Communication protocol Data ITU-T-Rec (Former CCITT) V.21/V.22/V.22bis/V.32/ V.32bis/V.34/V.90 Bell 103/212A Fax: ITU-T-Rec (Former CCITT) V.17/V.29/V.27ter/V.
Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors. A high-resolution external monitor connected to the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16M colors.
Display Controller and Modes Video Modes The computer supports video modes defined in the table below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on, resolution, number of colors and refresh rates.
Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications From Factor Compatibility Network Operating System Media Access Protocol Data Rate ■ Mini PCI TypeIII ■ IEEE 802.11 Standard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The ‘Wi-Fi CERTIFIED’ logo is a certification mark of the Wi-Fi Alliance.
Wireless LAN Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4 GHz and 5 GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment. Refer to the sheet Information to the User for regulatory information that may apply in your country/region. ■ Band 5 GHz (5150-5850 MHz) (Revision A, 11a Turbo Mode) ■ Band 2.4 GHz (2400-2483.
Wireless LAN Frequency Range Channel ID 11 12 13 2400-2483.5 MHz 2462 2467*2 2472*2 Wireless IEEE 802.11 Channels Sets (11G Turbo Mode) Frequency Range Channel ID 5150-5850 MHz Note 6 2437 US only*4 When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point.
Wireless LAN Frequency Range Channel ID 124 128 132 136 140 5150-5850 MHz 149 153 157 161 5745*3 5765*3 5785*3 5805*3 5620*3 5640*3 5660*3 5680*3 5700*3 Note US only*4 US only*4 US only*4 US only*4 Wireless Channels Sets (Turbo Mode) *1 *2 *3 *4 User’s Manual Frequency Range Channel ID 5150-5850 MHz Note 42 50 58 152 160 5210*3 5250*3 5290*3 5760*3 5800*3 US only*4 US only*4 US only*4 US only*4 US only*4 Factory-set default channels Refer to the sheet Approved Countries/Regions for use for
Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 2 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Voltage rating: 125 or 250 VAC (depending on country/region’s power standards) Certification agencies U.S.
AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug configuration must be 6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U.S.A.
Appendix E If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office. Make a note of your computer’s machine type, model number, and serial number, and put it in a safe place.
If your computer is stolen To register the theft online, please follow these procedures: ■ Visit www.toshiba-europe.com on the Internet. In the product area, choose Computer Systems. ■ In the Computer Systems page, open the Support & Downloads menu and choose the Stolen Units Database option. Your entries are used to track your computer at our service points. TOSHIBA Theft Registration Send to: Fax number: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr.
Glossary The terms in this glossary cover the topics discussed in this manual. Alternate naming is included for reference.
Glossary IDE: integrated drive electronics I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MDA: monochrome display adapter MPEG: moving picture coding experts group MS-DOS: Microsoft Disk Operating System OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect PCMCIA: Personal Computer Memory Card International Association RAM: random
Glossary A adapter: A device that provides an interface between two dissimilar electronic devices. For example, the AC adapter modifies the power from a wall outlet for use by the computer. This term also refers to the add-in circuit cards that control external devices, such as video monitors and magnetic tape devices. allocate: To assign a space or function for a specific task.
Glossary BIOS: Basic Input Output System. The firmware that controls data flow within the computer. See also firmware. bit: Derived from ìbinary digit,î the basic unit of information used by the computer. It is either zero or one. Eight bits is one byte. See also byte. Bluetooth: A short-range radio technology designed to simplify wireless communication among computers, communication devices and the Internet. board: A circuit board.
Glossary CGA: Color/graphics adapter. A video display protocol defined by the IBM Color/Graphics Monitor Adapter and its associated circuitry. This protocol supports two-color 640 × 200 and four-color 320 × 200 graphics, and 16-color 640 × 200 and 320 × 200 text modes. character: Any letter, number, punctuation mark, or symbol used by the computer. Also synonymous with byte. chassis: The frame containing the computer.
Glossary CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. D data bits: A data communications parameter controlling the number of bits (binary digits) used to make up a byte. If data bits = 7 the computer can generate 128 unique characters. If data bits = 8 the computer can generate 256 unique characters.
Glossary E echo: To send back a reflection of the transmitted data to the sending device. You can display the information on the screen, or output it to the printer, or both. When a computer receives back data it transmitted to a CRT (or other peripheral device) and then retransmits the data to the printer, the printer is said to echo the CRT. EGA: Enhanced Graphics Adapter.
Glossary G gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also megabyte. GND: Ground. An RS-232C signal used in the exchange of data between a computer and serial device. graphics: The use of drawings, pictures, or other images, such as charts or graphs, to present information. H hard disk drive (HDD): An electromechanical device that reads and writes a hard disk. See also hard disk. hard disk: A non-removable disk usually referred to as drive C. Also called fixed disk.
Glossary input: The data or instructions you provide to a computer, communication device or other peripheral device from the keyboard or external or internal storage devices. The data sent (or output) by the sending computer is input for the receiving computer. instruction: Statements or commands that specify how to perform a particular task. interface: 1) Hardware and/or software components of a system used specifically to connect one system or device to another.
Glossary LSI: Large Scale Integration. 1) A technology that allows the inclusion of up to 100,000 simple logic gates on a single chip. 2) An integrated circuit that uses the large scale integration. M main board: See motherboard. MDA: Monochrome Display Adapter. A video display protocol defined by the IBM Monochrome Display Adapter and its associated circuitry for direct drive TTL displays that supports a monochrome 720 × 350 text mode. megabyte (MB): A unit of data storage equal to 1024 kilobytes.
Glossary nonvolatile memory: Memory, usually read-only (ROM), that is capable of permanently storing information. Turning the computer’s power off does not alter data stored in nonvolatile memory. numeric keypad overlay: A feature that allows you to use certain keys on the keyboard to perform numeric entry, or to control cursor and page movement. O OCR wand: A device that reads, using an optical device, hand written or machine printed symbols into a computer. See also OCR.
Glossary pixel: A picture element. The smallest dot that can be made on a display or printer. Also called a pel. plug and play: A capability with Windows that enables the system to automatically recognize connections of external devices and make the necessary configurations in the computer. Port Replicator: Devices that enables one-point connection to a number of peripheral devices and provides additional ports and slots.
Glossary S SCSI: Small Computer System Interface is an industry standard interface for connection of a variety of peripheral devices. serial communications: A communications technique that uses as few as two interconnecting wires to send bits one after another. serial interface: Refers to a type of information exchange that transmits information sequentially, one bit at a time. Contrast: Parallel interface.
Glossary U USB: Enables chain connection of a number of USB-equipped devices to one port on your computer. For example, you might connect a USBHUB to the computer, then connect a keyboard to the USB-HUB and a mouse to the keyboard. V VGA: Video graphics array is an industry standard video adapter that lets you run any popular software. volatile memory: Random access memory (RAM) that stores information as long as the computer is connected to a power source.
Index A AC adaptor, 1-6, 2-4, 2-14 Accessing, 7-1 adaptor, 1-13, 2-14, 8-6 Additional, 8-6 additional, 1-13 Analyzing the problem, 9-2 Arrow mode, 5-7 ASCII characters, 5-8 Attach, 8-9 automatic power off, 1-9 B battery life, 6-10 Battery pack, 2-5 battery pack, 6-5 Boot Priority, 7-3 C cable, 4-24 cache, 1-3 CD-RW/DVD-ROM drive, 1-4, 4-9 Charging, 6-7 Cleaning the computer, 4-25 Connecting, 3-5, 4-22, 4-24 CPU, 7-3 cursor, 5-3 D DC IN 15V, 2-4 DC IN indicator, 2-8, 6-3 Disconnecting, 4-22, 4-25 Disk ind
Index Fn + F9, 5-5 Fn key, 5-2 Fn Sticky key, 5-6 function keys, 5-2 G General, 7-2 General conditions, 3-2 H Hard disk drive, 1-4, 9-7 Hardware and system checklist, 9-3 Headphone, 1-7, 2-2 Hibernation, 1-11, 5-4 Hotkeys, 1-9, 5-3 HW Setup, 1-11 I indicator, 2-8, 6-2, 6-3 indicators, 2-8, 6-2 Installing, 8-2, 8-3 Instant security, 5-3 K Keyboard, 1-6, 5-1, 7-4, 9-6 Keypad overlay, 1-10, 5-7 L LAN, 1-8, 2-4, 7-4, 9-15 LCD panel, 9-7 Level 2 cache, 1-3 Lighting, 3-3 M Microphone, 1-7, 2-1 Modem, 1-7,
Index Standby/Hibernation, 9-15 Starting the computer by, 6-13 System start-up, 9-3 T Television, 8-7 Temporarily changing modes, 5-8 Temporarily using normal keyboard (overlay on), 5-8 Temporarily using overlay (overlay off), 5-8 TOSHIBA Power Saver, 1-11 TOSHIBA support, 9-16 TOSHIBA Theft Registration, E-2 Turning off, 3-7 Turning on, 3-6, 5-7 TV output signal, 9-13 types, 6-3 Typewriter keys, 5-1 U USB, 1-7, 2-2, 2-3, 2-4, 7-4, 9-13 use, 4-9 used, 4-20 user, 7-2 using, 4-24 Utilities, 1-11 V Video O