Projector-Laptop Setup Instructions for connecting Toshiba data projector (LCD) to Laptop
Connect VGA cable 1. Plug in the power cables for projector and laptop 2. Connect one end of the VGA cable to the RGB port of the data projector 3.
Turn on Equipment z Completely boot up the laptop.
If no image displays … z Continue pushing the input button on the data projector until RGB displays on the screen z Push the Fn key and the LCD/CRT key on the laptop simultaneously. Wait a moment.
Focus & Shut down z Focus the projector using the focus knob on front of the projector z Push the Standby/On button to shut down the data projector.
