Operations Preparations TDP-T95 TDP-T100 Maintenance Before Using DATA PROJECTOR Others OWNER’S MANUAL
Before Using The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This unit is fully transistorized and does not contain any parts that can be repaired by the user. 5. Heat 8. Power-Cord Protection The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
10. Lightning storms 12. Do not place the product vertically For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. However, while it is thundering or lightning, do not touch the apparatus and any connected cable and/or equipment. This will prevent you from receiving the electric shock by an electric surge.
19. Replacement Parts 22. Do not use the product in a closed installation state. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. (Replacement of the lamp only should be made by users.) Do not place the product in a box or in any other closed installation state. Otherwise it may overheat.
Avoid Volatile Liquid Disposal Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will leave marks on the finish. If cleaning with a chemically saturated cloth, be sure to follow the product's precautions. This product contains substances which are harmful to humans and the environment. • The lamp contains mercury. Please dispose of this product or used lamps in accordance with local regulations.
Before Using Maintenance SAFETY PRECAUTIONS .................................................................................. IMPORTANT SAFETY INSTRUCTIONS ........................................................... POWER SUPPLY CORD SELECTION .............................................................. IMPORTANT PRECAUTIONS ........................................................................... EXEMPTION CLAUSES ....................................................................................
Preparations Checking the package contents Names of each part on the main unit Please make sure that the following items are included in the box, along with the main unit. If any item is missing, please contact the store immediately where you purchased the product.
Names of each part on the control panel and remote control (9) (10) Remote Control (11) Laser light source (14) (13) (6) (2) (7) (8) (1) (8) (7) (2) (6) (3) Remote control transmitter Warning label (4) (3) (12) (26) (13) (14) (15) (16) (17) (18) (19) Name AUTO SET button Laser indicator Mouse control button PAGE+ button MUTE button FREEZE button Ten-Key button : : : : : : : : Main Function Sets up analog input from computer. p.28 Lights when laser is on. Controls a mouse pointer. p.
Names of the terminals on the rear panel (1) (2) (3) (4) (5) (6) Preparing and using the remote control ■ Loading dry-cell batteries into the remote control ■ Operating the remote control q Remove the battery cover. Turn on the ON/OFF switch of the remote control. Point toward the projector’s infrared remote sensor, and press a button on the remote control. w Insert the dry-cell batteries. Be sure to align the plus and minus ends of the batteries properly.
Operating a computer using the remote control Placement A computer can be operated using the projector’s remote control. This function is available on any computer with the Windows® 98/98SE, Windows® Me, Windows® 2000, or Windows® XP OS, that is equipped with a USB port which can support USB1.1 (The mouse remote control receiver is also supported on OS 9 or OS X for the Macintosh). However, please note that Toshiba does not guarantee the operation of all computers.
Connection Before connection Computer (for control) To RS-232C terminal Computer Computer p.52 Control cable To audio output Audio cable (not supplied) Audio cable (not supplied) To audio output To RGB Audio cable output (not supplied) RGB cable (supplied) Video recorder, DVD player, etc. To audio output White (L)/ To RGB Red (R) output RGB cable (not supplied) Audio cable (not supplied) To S-video output • The COMPUTER 1 IN terminal functions identically to the COMPUTER 2 IN terminal.
Operations Turning the power on and off ■ Connecting the power cord 1 Insert the power cord connector into the AC IN socket of the projector. 2 Insert the power cord plug into a wall or other power outlet. Notes Power cord connector (Supplied) The ON/STANDBY indicator will change to orange, indicating standby mode. • The start-up screen will disappear after a moment. You can dismiss the start-up screen before this by performing any operation.
Basic operations 5 Projector placement angle adjustments Turn on the power by following the instructions in “Turning the power on” p.24 . 2 Select the language and the lamp power (When using the first time). When the projector is used for the first time after purchase, the start menu for language (to display the menus and messages on the screen) and lamp power selection and configuration is displayed in English. (If the screen is out of focus, adjust it according to the step 6 .
Using handy features ■ Using auto setting (Only for input from computer) This function sets up the projector to the optimum state such as sampling phase, frequency, screen position, and clamp for each type of the input signal by using simple operations. Remote Control Press the remote control’s AUTO SET button. For computer input, the icon will appear during processing. You can set as well by selecting [Auto setting] in the Image adjustment menu p.35 . The keystone distortion is automatically corrected.
Using handy features (Continued) Notes • The icon appears while resizing. • Operating a function other than Mute will release resizing. • As zooming is processed digitally, the image quality is degraded in larger zoom ratio. • During resizing or moving the zooming area, the image may be distorted. ■ Cutting off the picture and sound temporarily (Mute) Remote Control Press the remote control’s MUTE button. The picture and sound are cut off.
Using handy features (Continued) ■ Password function How to cancel password (from [On] to [Off]) When the password function is added and [Password] is set to [On], image projection requires an entry of the preset password at power-on. To add the password function, perform the following procedure: (The password function, once added, cannot be deleted. Set [Password] to [Off] if you do not want to use it after addition.) The password entry screen is displayed.
Using the menus ■ How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the MENU button 2. Select a Category Select a category by using Image adjustment menu p.35 Default setting menu p.40 Status display menu p.42 3. Adjustments & Settings Description Press or to open the menu. These marks signify the items can be adjusted/set by using . These marks signify the items can be selected from the list by using .
Using the menus (Continued) Position Description Computer Y/PB/PR Video S-video V-position Adjust the vertical position of the image. Yes No No No Clamp 1 Adjusts the clamp pulse position. Yes No No No Clamp 2 Adjusts the clamp pulse width. Yes No No No *1: [Noise reduction] may not work depending on signal type. *2: [[NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or [NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese.
Using the menus (Continued) Note Notes • If you use the screen size setting function on commercial video software, broadcast or cable-broadcasting programs to display images with the varying aspect ratio except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. [Blackboard mode] Projects the image in colors more like projecting on a screen.
Using the menus (Continued) ■ The default setting menu [Power on] This menu shows placement status and other settings. Note that if [Power on] is set to [Auto], then if the power is supplied when restored after a power outage, the projector will come on. Description [Lamp power] Projection mode Sets projection mode in accordance with Placement Style. p.21 No signal power off Set the time to wait for the power to be turned off after the last operation is made with no input signal.
Maintenance Using the menus (Continued) About lamp ■ Displaying Information (Status display) The product’s light source is a mercury lamp that lights at increased internal pressure. Be sure to fully understand the following characteristics of the lamp and handle it with extreme care. • The lamp may burst with a loud noise due to impact or deterioration, or fail to light at the expiration of its life. • How long it takes before the lamp bursts or the life expires may vary greatly by lamp.
Lamp replacement A lamp is consumable supplies. If used for extended periods, images will appear dark, and the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on condition of use.) If this happens, replace it with a new one. 4 Pull out the lamp. 4 Loosen the three lamp locking screws, pull up the handle, and remove the lamp.
Lens and main unit cleaning Trouble indications The indicator lights to inform you of internal abnormalities. WARNING No power • Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership. Attempting to clean/replace the lamp at a high site by yourself may cause you to fall down, thus resulting in injury. ⇒ Problem with projector • Unplug the power cord, and contact your dealer.
Before calling service personnel Specifications If you think something is wrong, check the followings before contacting customer service. Please see “Trouble indications” p.47 as well. ■ List of general specifications Power goes out during use • Is the ambient temperature high? p.47 • Is the air intake or air exhaust blocked? p.47 No picture • • • • • Is the projector turned on? (When [Auto input search] is [Off]) p.40 Is the mute function on? p.30 Is the brightness setting minimized? p.
Specifications (Continued) ■ List of supported signals (Y/PB/PR signals) This projector supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking. Please adjust the projector if this happens.
Specifications (Continued) ■ CONTROL terminal ● Pin assignment 7 6 8 5 3 4 2 1 Pin No. 1 2 3 4 5 6 7 8 Signal Name RXD CTS DSR GND RTS N.
