User’s Manual L350/L350D computers.toshiba-europe.
L350/L350D Copyright © 2008 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
L350/L350D Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and world-wide patents issued and pending. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved. Other trademarks and registered trademarks not listed above may be used in this manual.
L350/L350D ■ Before you connect the computer to a power source, ensure that the voltage rating of the AC adaptor matches that of the available power source. 115 V/60 Hz in most of North and South America and some Far Eastern countries such as Taiwan. 100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan. 230 V/50 Hz in most of Europe, the Middle East, and the Far East.
L350/L350D Modem warning notice Conformity statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
L350/L350D Disposal of batteries and/or accumulators Pb, Hg, Cd The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.
L350/L350D Optical disc drive standards TOSHIBA L350/L350D computer is shipped with the following drive preinstalled: DVD Super Multi (+-R DL). ■ The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
L350/L350D Manufacturer Type Pioneer DVD Super Multi (±R Double Layer) DVR-KD08TBM/DVR-KD08TBF Pioneer DVD Super Multi (±R Double Layer) DVR-TD08TBM/DVR-TD08TBF Important notice Copyrighted works including, but not limited to music, video, computer program, databases are protected by copyright laws. Unless specifically permitted under applicable copyright laws, you cannot copy, modify, assign, transmit or otherwise dispose of any copyrighted work with the consent of the owner of the copyright.
L350/L350D Table of Contents Preface General Precautions Chapter 1 Introduction Equipment checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L350/L350D Chapter 4 Operating Basics Using the touchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1 Using optical disc drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2 Writing CD/DVDs on DVD Super Multi (+-R DL) drive . . . . . . . . . . . . .4-6 Important message (DVD Super Multi (+-R DL) drive) . . . . . . . . . . . .4-6 TOSHIBA Disc Creator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-10 Video . . . . .
L350/L350D Chapter 9 Troubleshooting Problem solving process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 Hardware and system checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3 TOSHIBA support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L350/L350D xii User’s Manual
L350/L350D Preface Congratulations on your purchase of the TOSHIBA L350/L350D computer. This powerful, lightweight notebook computer is designed to provide years of reliable, high-performance computing. This manual tells you how to set up and begin using your TOSHIBA L350/ L350D computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
L350/L350D Chapter 6, Power and Power-up Modes, gives details on the computer’s power resources and battery save modes. Chapter 7, HW Setup and Passwords, explains how to configure the computer using the HW Setup program. It also tells how to set a password. Chapter 8, Optional Devices, describes the optional hardware available.
L350/L350D Display ABC Names of windows or icons or text generated by the computer that appear on its display screen are presented in the typeface you see to the left. Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read.
L350/L350D xvi User’s Manual
L350/L350D General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
L350/L350D Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.
L350/L350D Chapter 1 Introduction This chapter provides an equipment checklist, and it identifies the computer’s features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packaging materials for future use.
L350/L350D Software Microsoft® Windows Vista™ The following software is preinstalled: ■ Microsoft® Windows Vista™ ■ Ulead DVD Movie Factory® for TOSHIBA ■ TOSHIBA DVD PLAYER ■ TOSHIBA Value Added Package ■ TOSHIBA Face Recognition(Is preinstalled with some models) ■ TOSHIBA Assist ■ TOSHIBA HW Setup utility ■ TOSHIBA ConfigFree ■ TOSHIBA Disc Creator ■ Online Manual Documentation ■ TOSHIBA L350/L350D User´s Manual ■ TOSHIBA L350/L350D Quickstart ■ Instruction Manual for Safety and Comfort ■ Warranty infor
L350/L350D ■ PC2-6400/PC2-5300 memory modules work as PC2-4200 speed on GL960 Express chipset. ■ PC2-6400 memory module works as PC2-5300 speed on GL40 Express chipset / GM965 Express chipset. Video RAM Depending on the model you purchased. Mobile Intel® GM965 Express Chipset / Mobile Intel® GL960 Express Chipset: Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology.
L350/L350D DVD Super Multi (+-R DL) drive Some models are equipped with a full-size DVD Super Multi (+- R DL) drive module that allows you to record data to rewritable CD/DVDs as well as run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed.
L350/L350D Pointing device Built-in A touchpad and control buttons in the palm rest enable control of the on-screen pointer. Power Battery pack The computer is powered by one rechargeable lithium-ion battery pack. RTC battery The internal RTC battery backs up the Real Time Clock (RTC) and calendar. AC adaptor The universal AC adaptor provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord.
L350/L350D Multimedia Web camera (optional) Record/Send still or video images with this integrated web camera. (Provided with some models) Sound system Windows Sound System compatible sound system provides internal speaker as well as jacks for an external microphone and headphone. It also has a volume control dial. Communications 1-6 LAN The computer is equipped with a LAN card that supports Ethernet LAN (10 Mbit/s, 10BASE-T) or Fast Ethernet LAN (100 Mbit/s, 100BASE-TX).
L350/L350D Security Security lock slot Connects a security lock to anchor the computer to a desk or other large object. Software Operating system Microsoft® Windows Vista™ is available. Refer to the preinstalled Software section at the front of this chapter. TOSHIBA Utilities A number of utilities and drivers are preinstalled to make your computer more convenient to use. Refer to the Utilities and applications section in this chapter.
L350/L350D 1-8 Power-on password Two levels of password security, supervisor and user, are available to prevent unauthorized access to your computer. Instant security A hot key function blanks the screen and disables the computer providing data security. Intelligent power supply A microprocessor in the computer’s intelligent power supply detects the battery’s charge and calculates the remaining battery capacity.
L350/L350D Hibernation This feature allows you to turn off the power without exiting from your software. The contents of main memory are saved to the hard disk, when you turn on the power again, you can continue working right where you left off. Refer to the Turning off the power section in Chapter 3, Getting Started, for details Sleep If you have to interrupt your work, you can turn off the power without exiting from your software. Data is maintained in the computer’s main memory.
L350/L350D ■ When you start or resume your computer, the TOSHIBA Flash Cards may take a moment to become available and may display several times before completely activating. The hot key functions will be available once the TOSHIBA Flash Cards are completely active. ■ If your system is busy and you see a [Not Responding] message, allow TOSHIBA Flash Cards to completely activate before you continue to use the utility and hot keys.
L350/L350D TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks. You can boot ConfigFree from the menu bar as follows.
L350/L350D Options You can add a number of options to make your computer even more powerful and convenient to use. The following options are available: Memory expansion PC2-5300 512 MB, 1 GB or 2 GB memory modules can be installed in the two memory slots of all models. PC2-6400 512 MB, 1 GB, 2 GB or 4 GB memory modules can only be installed in the two memory slots of below model: ■ ATI Radeon™ 3100 Graphics model model Maximum system memory size and speed depend on the model you purchased.
L350/L350D Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer’s front with its display panel in the closed position.
L350/L350D Multiple digital media card slot This slot allows you to easily transfer data from devices, such as digital camera and PDA, that use flash memory (SD/SDHC/MS/MS Pro/MMC memory cards)(Provided with some models). Display latch This latch secures the LCD panel in its closed position. Slide the latch to open the display. Microphone jack A standard 3.5 mm mini microphone jack enables connection of a monaural microphone or other device for audio input. Headphone jack A standard 3.
L350/L350D Be careful not to block the fan vent. Also be careful to keep foreign objects out of the vents. A pin or similar object can damage the computer’s circuitry. HDMI out port (optional) HDMI out port can connect with Type A connector HDMI cable. One HDMI cable can send and receive video, audio and control signals.(Provided with some models) LAN jack This jack allows you to connect to a LAN.
L350/L350D Right side The following figure shows the computer’s right side. Security lock slot USB port Optical disc drive DC IN 19V Figure 2-3 The right side of the computer Universal serial The universal serial bus (USB) port comply with bus (USB 2.0) port USB Serial 2.0 standards, which enables data transfer speeds 40 times faster than the USB 1.1 standards. (The port also supports USB 1.1) Keep foreign objects out of the USB connector. A pin or similar object can damage the computer’s circuitry.
L350/L350D Back side The following figure shows the computer’s back side. Modem jack* *Depending on the model you purchased Figure 2-4 The computer’s back side Modem jack (optional) In areas where an internal modem is installed as standard equipment, there is a modem jack that allows you to use a modular cable to connect the modem directly to a telephone line. The modem is not supported in some marketing regions.
L350/L350D 2-6 Battery pack The battery pack powers the computer when the AC adaptor is not connected. The Batteries section in Chapter 6, Power and Power-up Modes, describes how to access the battery pack. Additional battery packs can be purchased from your TOSHIBA dealer to extend the computer’s battery operating time. Battery release latch Slide this latch to release the battery pack. This latch moves only when the computer is upside down.
L350/L350D Front with the display open The following figure shows the front of the computer with the display open. To open the display, lift the display up and position the display at a comfortable viewing angle.
L350/L350D Touch pad Moves the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling, selecting, and doubleclicking. Touch pad control buttons Function like the left and right buttons on an external mouse. System indicators Five LEDs allow you to monitor the DC IN, power status, main battery, disk and multiple digital media card. Details are in the system indicators section.
L350/L350D Function Buttons Six buttons are provided with some models. Available for use: Mute, CD/DVD, Play/Pause, Stop, Previous, Next. These buttons allow you to manage audio/video, run applications and access utilities. Refer to the Function Buttons section in Chapter 4, Operating Basics, for details. User’s Manual Mute button Press this button to turn off the sound. CD/DVD button Press this button to launch an application program that allows Windows Media Player / DVD PLAYER.
L350/L350D System indicators The following figure shows the system indicators, which light when various computer operations are in progress. Multiple digital media card HDD/ODD Main battery DC IN Power Figure 2-7 System indicators 2-10 DC IN The DC IN indicator glows green when DC power is supplied from the AC power adaptor. If the adaptor’s output voltage is abnormal or if the power supply malfunctions, this indicator shows no light. Power The Power indicator glows green when the computer is on.
L350/L350D Keyboard indicators The following figure shows the position of the CAPS LOCK indicator. When the CAPS LOCK indicator glows the keyboard is in all-caps mode. CAPS LOCK indicator Figure 2-8 CAPS LOCK indicator CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format. Optical disc drive A DVD Super Multi (+-R DL) drive is configured in your computer. When the computer is accessing a CD/DVD, an indicator on the drive glows.
L350/L350D Writable discs This section describes the types of writable CD/DVD discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics. CDs ■ CD-R discs can be written only once. The recorded data cannot be erased or changed. ■ CD-RW discs can be recorded more than once. Use either 1, 2, or 4 multi speed CD-RW discs or high-speed 4 to 10 speed discs.
L350/L350D AC adaptor The AC adaptor converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any region. To recharge the battery, simply connect the AC adaptor to a power source and the computer. See Chapter 6, Power and Power-up Modes for details.
L350/L350D 2-14 User’s Manual
L350/L350D Chapter 3 Getting Started This chapter provides basic information to start using your computer. It covers the following topics: Be sure also to read Instruction Manual for Safety and Comfort. This guide, which is included with the computer, explains product liability.
L350/L350D Connecting the AC adaptor Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power. The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery pack, refer to Chapter 6, Power and Power-up Modes.
L350/L350D Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. To open the display, slide the latch to the right side and lift the panel up to the best viewing angle. When you open the display, be sure to hold the base firmly and lift up the monitor slowly.
L350/L350D Starting up for the first time When you first turn on the power, the computer’s initial screen is the Microsoft® Windows Vista™ Startup Screen Logo. Follow the on-screen directions. Turning off the power The power can be turned off in one of three modes:shut down (Boot) , hibernation mode or sleep mode. Shut down mode (Boot mode) When you turn off the power in shut down mode, no data is saved and the computer will boot to the operating system’s main screen. 1.
L350/L350D Benefits of hibernation mode The hibernation feature provides the following benefits: ■ Saves data to the hard disk when the computer automatically shuts down because of a low battery. For the computer to shut down in hibernation mode, the hibernation feature must be enabled in the Hibernate tab in Power Options. Otherwise, the computer will shut down in sleep mode. If battery power becomes depleted, data saved in sleep mode will be lost.
L350/L350D Data save in hibernation mode When you turn off the power in hibernation mode, the computer takes a moment to save current memory data to the hard disk. During this time, the Disk indicator will light. After you turn off the computer and memory is saved to the hard disk, turn off the power to any peripheral devices. Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.
L350/L350D Executing sleep mode You can also enable sleep mode by pressing FN + F3. See Chapter 5, The Keyboard, for details. You can enter sleep mode in one of three ways: 1. Click Windows Start button, point to , and then click Sleep. 2. Close the display panel. This feature must be enabled. Refer to the Power Options in the Control Panel. 3. Press the power button. This feature must be enabled. Refer to the Power Option in the Control Panel.
L350/L350D System Recovery Options About 1.5 GB hidden partition is allocated on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the system in the event of a problem. The System Recovery Options feature will be unusable if this partition is deleted. System Recovery Options The System Recovery Options feature is installed on the hard disk when shipped from the factory.
L350/L350D Creating Optical Recovery Discs This section describes how to create Recovery Discs. ■ Be sure to connect the AC adaptor when you create Recovery Discs. ■ Be sure to close all other software programs except the Recovery Disc Creator. ■ Do not run software such as screen savers which can put a heavy load on the CPU. ■ Operate the computer at full power. ■ Do not use power-saving features. ■ Do not write to the disc when the virus check software is running.
L350/L350D Restoring the pre-installed software from your created Recovery Discs Please set your BIOS to default before you recover your computer to the factory state! If the pre-installed files are damaged, you are able to use the Recovery Discs you have created to restore the computer to the state it was in when you originally received it.
L350/L350D Be sure to connect the AC adaptor, otherwise you may run out of battery during the recovery process. When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. 1. Turn off the computer. 2. Turn on the computer and when the TOSHIBA screen appears repeatedly press the F8 key. 3. The Advanced Boot Options menu will be displayed. Use the arrow keys to select Repair Your Computer and press ENTER. 4.
L350/L350D 3-12 User’s Manual
L350/L350D Chapter 4 Operating Basics This chapter gives information on basic operations including using the touchpad, optical disc drives, Audio/Video controls, the web camera, the microphone, the internal modem, wireless communication and LAN. It also provides tips on caring for your computer, and CD/DVDs. Using the touchpad To use the touchpad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.
L350/L350D Using optical disc drives Operation is the same for all optical disc drives. The full-size drive provides high-performance execution of CD/DVDs-based programs. You can run CD/DVDs without an adaptor. When the computer is accessing a CD/DVDs, an indicator on the drive glows. Use the TOSHIBA DVD PLAYER application to view DVD-Video discs.
L350/L350D 2. Grasp the drawer gently and pull until it is fully opened. Figure 4-4 Pulling the drawer open 3. Lay the CD/DVD, label side up, in the drawer. Figure 4-5 Inserting a CD/DVD When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the tray. After seating the CD/DVD, however, make sure it lies flat, as shown in above figure. ■ Do not touch the laser lens.
L350/L350D 5. Push the center of the drawer to close it. Press gently until it locks into place. If the CD/DVD is not seated properly when the drawer is closed, the CD/DVD might be damaged. Also, the drawer might not open fully when you press the eject button. Figure 4-6 Closing the drawer Removing discs To remove the CD/DVD, follow the steps below and refer to below figure. Do not press the eject button while the computer is accessing the drive.
L350/L350D 2. The CD/DVD extends slightly over the sides of the drawer so you can grasp it. Hold the CD/DVD gently and lift it out. Figure 4-7 Removing a CD/DVD 3. Push the center of the drawer to close it. Press gently until it locks into place. Function Buttons This section describes a button functions. Some models are equipped with six buttons.
L350/L350D Writing CD/DVDs on DVD Super Multi (+-R DL) drive Some models are equipped with a full-size DVD Super Multi (+-R DL) drive which can be used to write data to either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM/+R DL/-R DL discs. The following applications for writing are supplied: TOSHIBA Disc Creator or Ulead DVD Movie Factory® for TOSHIBA, which is a product of Ulead Systems, Inc.
L350/L350D DVD-RW: DVD Specifications for DVD-RW Disc for General Version 1.2 MITSUBISHI KAGAKU MEDIA CO., LTD Victor Company of Japan, LTD DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2 Matsushita Electric Industrial Co., Ltd. Hitachi Maxell Ltd. DVD+R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. Ricoh Co., Ltd. DVD-R DL: MITSUBISHI KAGAKU MEDIA CO., LTD.
L350/L350D ■ Data deleted (erased) from a CD-RW and DVD-RW, DVD+RW and DVD-RAM disc cannot be recovered. Check the content of the disc carefully before you delete it. If multiple drives that can write data to discs are connected, be careful not to delete data from the wrong drive. ■ In writing to a DVD-R/-R DL/-RW, DVD+R/+R DL/+RW or DVD-RAM disc, some disc space is required for file management, so you may not be able to write the full capacity of the disc.
L350/L350D When writing or rewriting Please observe/consider the following when you write or rewrite to a CD-R/RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc. ■ Do not perform any of the following actions: ■ Change users in the Windows Vista™ operating system. ■ Operate the computer for any other function, including use of a mouse or touchpad, closing/opening the LCD panel. ■ Start a communication application such as a modem. ■ Apply impact or vibration to the PC.
L350/L350D TOSHIBA Disc Creator Note the following limitations when you use TOSHIBA Disc Creator: ■ DVD-Video cannot be created using TOSHIBA Disc Creator. ■ DVD-Audio cannot be created using TOSHIBA Disc Creator. ■ You cannot use TOSHIBA Disc Creator’s “Audio CD for Car or Home CD Player” function to record music to DVD-R, DVD-R DL,DVD-RW, DVD+R, DVD+R DL,or DVD+RW media.
L350/L350D Data verification To verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewrite process: 1. Display the setting dialog box by one of the following two steps: ■ Click the setting button ( ) for writing on the main toolbar in the Data CD/DVD mode. ■ Select Setting for writing -> Data CD/DVD in the Setting menu. 2. Mark the Verify written data check box. 3. Select File Open or Full Compare mode. 4.
L350/L350D Simplified steps for making a DVD-Video from adding video source: 1. Click Start -> All Programs -> DVD Movie Factory for TOSHIBA -> Ulead DVD Movie Factory for TOSHIBA Launcher to launch DVD Movie Factory. 2. Click Video Disc -> New Project to invoke 2nd Launcher, choose your project type, then invoke DVD Movie Factory. 3. Add source from HD Disk by click Add Video files button to invoke browser dialog box. 4. Choose the source video then go to Next page to apply Menu. 5.
L350/L350D 2. Before recording the video to DVD ■ When you record DVD disc, please use only discs recommended by the Drive manufacturer. ■ Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD. ■ Do not perform any of the following actions: ■ Operate the computer for any other function, including using a mouse or touchpad, or closing/opening the display panel. ■ Bump or cause vibration to the computer.
L350/L350D 3. Do not write on, apply a sticker to, or otherwise mark the surface of the CD/DVD that contains data. 4. Hold the CD/DVD by its outside edge or the edge on the center hole. Fingerprints on the surface can prevent the drive from properly reading data. 5. Do not expose to direct sunlight, extreme heat or cold. Do not place heavy objects on your CD/DVD. 6. If your CD/DVDs become dusty or dirty, wipe them with a clean dry cloth.
L350/L350D Using the software The web camera software is pre-configured to start when you turn on Windows Vista; if you need to restart it go to Start -> All Programs -> Camera Assistant Software -> Camera Assistant Software. Video recording Audio recording Capture still images Function Display window Camera resolution Effects Mute Figure 4-10 Using the Software User’s Manual Capture Still Image Click to see a preview of the captured image; you can also e-mail the image.
L350/L350D Settings Chooses from the : Options tab to change the tool position; the Picture tab to select picture output options such as size, export file and saving location; the Video tab to choose output settings such as Frame Rate, Size, Compression and the file save path; the Audio Device, Compression,Volume and file save path. Help Displays the help files for the software.
L350/L350D ■ Bright background light and/or shadows may prevent a registrant from being recognized correctly. In that case, log in using your Windows password. If recognition of a registrant fails repeatedly, refer to your computer documentation to learn ways to improve recognition performance. Disclaimer Toshiba does not guarantee that the face recognition utility technology will be completely secure or error-free.
L350/L350D 5. Click the Next button to start image-capturing process. Adjust the position of your face so that it fits within the face-shaped frame. 6. Once your face has been positioned properly, the recording will commence. Start moving your neck very slightly to the left and right, and then move your neck down and up. 7. Registration will end after you have repeatedly moved your neck left, right, down and up.
L350/L350D Windows Logon via TOSHIBA Face Recognition This section explains how to login to Windows with TOSHIBA Face Recognition. Two authentication modes are provided. ■ AUTO Mode Login screen : If the face authentication tile is selected by default, you can log in without using the keyboard or mouse.
L350/L350D Modem The availability of this feature is depending on the model you purchased. This section describes how to connect and disconnect the internal modem to and from a telephone jack. The internal modem does not support voice functions. All data and fax functions are supported. ■ In case of a lightning storm, unplug the modem cable from the telephone jack ■ Do not connect the modem to a digital telephone line. A digital line will damage the modem.
L350/L350D Properties menu Click the icon with the secondary mouse button to display the following menu. Figure 4-12 The menu list (Windows Vista™) Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region. Location list for region selection.
L350/L350D Connecting To connect the internal modem cable, follow the steps below. 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a telephone jack. Modem jack Telephone jack Figure 4-13 Connecting the internal modem Do not pull on the cable or move the computer while the cable is connected. Disconnecting To disconnect the internal modem cable, follow the steps below. 1.
L350/L350D ■ Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit encryption algorithm (Atheros module type). ■ 11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b, 802.11g and 802.11n respectively. The IEEE 802.11n specification has not been finalized and is currently in draft release. The TOSHIBA 11a/b/g/n Wireless LAN Adaptors are based on the draft release version 2.0, of the IEEE 802.11n specification.
L350/L350D If you used the Task Bar to disable Wireless LAN, restart the computer or follow the procedures below to enable the system to recognize Wireless LAN. Click Start -> Control Panel -> System and Maintenance -> System -> Device Manager -> Network Adaptors, and right click the wireless device then choose Enable. It may not be possible to make a network connection to a specified network name using the ad hoc network function.
L350/L350D To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices connected to the computer. 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. LAN jack Figure 4-14 Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub.
L350/L350D Moving the computer The computer is designed for rugged durability. However, a few simple precautions taken when moving the computer will help ensure trouble-free operation. ■ Make sure all disk activities are terminated before moving the computer. Check if the Disk indicator and external device indicator are off. ■ If a CD/DVD is in the drive, remove it. Also make sure the drawer is securely closed. ■ Turn off the power to the computer.
L350/L350D Chapter 5 The Keyboard The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are four types of keys: typewriter keys, function keys, soft keys, and Windows special keys. Typewriter keys The typewriter keys, produce the uppercase and lowercase letters, numbers, punctuation marks, and special symbols that appear on the screen.
L350/L350D Function keys: F1 … F9 The function keys, not to be confused with FN, are the 9 keys at the top of your keyboard. These keys are dark gray, but function differently from the other dark gray keys. F1 through F9 are called function keys because they execute programmed functions when pressed. Used in combination with the FN key, keys marked with icons execute specific functions on the computer. See the section, Soft keys: FN key combinations, in this chapter.
L350/L350D Sleep Pressing FN + F3 switches the system to sleep mode. Hibernate Pressing FN + F4 switches the system to hibernation mode. Output Pressing FN + F5 changes the active display device. Brightness down Pressing FN + F6 decreases the computer’s display panel brightness in individual steps. Brightness up Pressing FN + F7 increases the computer’s display panel brightness in individual steps.
L350/L350D Zoom Pressing FN + SPACE changes the display resolution. TOSHIBA zooming utility (reduce) Pressing FN + 1 reduces the icon size on the desktop or the font sizes within one of the supported application windows. TOSHIBA zooming utility (enlarge) Pressing FN + 2 enlarges the icon size on the desktop or the font sizes within one of the supported application windows.
L350/L350D Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation. But, you can generate these characters using their ASCII codes. With the overlay on: 1. Hold down ALT. 2. Using the overlay keys, type the ASCII code. 3. Release ALT, and the ASCII character appears on the display screen. With the overlay off: 1. Hold ALT + FN. 2. Using the overlay keys, type the ASCII code. 3. Release ALT + FN, and the ASCII character appears on the display screen.
L350/L350D 5-6 User’s Manual
L350/L350D Chapter 6 Power and Power-up Modes The computer’s power resources include the AC adaptor and an internal battery. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power-up modes.
L350/L350D Power on AC adaptor not connected Battery charge is above low battery trigger point • Operates • LED: Battery off DC IN off Battery charge is below low battery trigger point • Operates • LED: Battery blinking orange DC IN off Battery charge is exhausted Computer goes into hibernation or shuts down (depending on the Toshiba power Management Utility Setting) Power off (no operation) No battery installed • No operation • LED: Battery off DC IN off Power indicators The Battery, DC IN and Po
L350/L350D DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected. Green Indicates the AC adaptor is connected and supplying proper power to the computer. No light Under any other conditions, the indicator does not light. Power indicator Check the Power indicator to determine the power status of the computer the following indicator conditions should be noted: Green Indicates power is being supplied to the computer and the computer is turned on.
L350/L350D When the computer is powered off in hibernation and sleep mode, and the AC adaptor is not connected, the battery pack supply power to maintain data and programs in memory. If the battery pack is completely discharged, hibernation and sleep do not function and the computer loses all data in memory. One of the following messages appears when you turn on the power: The firmware has detected that a CMOS battery fail occurred. contiune The firmware has detected that a CMOS battery fail occurred.
L350/L350D Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance. Safety precautions Mishandling of batteries can cause death, serious injury or property damage.
L350/L350D 8. Never expose the battery pack to abnormal shock, vibration or pressure. The battery pack’s internal protective device will fail, causing it to overheat, explode, ignite or leak caustic liquids possibly resulting in death or serious injury. 9. Never let a battery pack become wet. A wet battery pack will overheat, ignite or rupture possibly resulting in death or serious injury. Warning 1. Never allow caustic electrolyte fluid leaked from a battery pack to contact your eyes, skin or clothing.
L350/L350D 6. Be sure to monitor the remaining battery power. If the battery pack and real time clock battery discharge completely. Sleep and hibernation will not function and data in memory will be lose. Also, the computer might register an incorrect time and date. In this case, connect the AC adaptor to recharge the batteries. 7. Never install or remove the battery pack without first turning off the power and disconnecting the AC adaptor.
L350/L350D Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack (6 cell) 8 hours or more 3 hours Battery pack (9 cell) 8 hours or more 4 hours RTC battery 24 hours 24 hours The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer.
L350/L350D Monitoring battery capacity Remaining battery power can be monitored in Power Options. Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. The computer needs this time to check the battery’s remaining capacity and to calculate the remaining operating time, based on the current power consumption rate and remaining battery capacity. The actual remaining operating time may differ slightly from the calculated time.
L350/L350D Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods.
L350/L350D Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. If the Battery indicator flashes orange shortly after fully recharging the battery, the battery pack needs to be replaced. You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source. This section explains how to remove and install battery packs.
L350/L350D 6. Slide the battery release latch to free the battery pack for removal, then lift up the battery pack. Battery Release Latch Battery Pack Figure 6-2 Slide the battery release latch and free the battery 7. Pull the battery pack forward to remove it. Battery Pack Figure 6-3 Removing the battery pack For environmental reasons, do not throw away a spent battery pack. Please return spent battery pack to your TOSHIBA dealer.
L350/L350D Installing the battery pack To install a battery pack, follow the steps below. The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Be sure the computer’s power is off and all cables are disconnected. 2. Insert the battery pack. Battery pack Figure 6-4 Installing the battery pack 3.
L350/L350D Power-up modes The computer has the following power-up modes: ■ Boot: Computer shuts down without saving data. Always save your work before you turn the computer off in boot mode. ■ Hibernation: Data in memory is saved to the hard disk. ■ Sleep: Data is maintained in the computer’s main memory. Refer also to the sections Turning on the power and Turning off the power in Chapter 3, Getting Started. Windows utilities You can specify the setting in Power Options.
L350/L350D Chapter 7 HW Setup and Passwords This chapter explains how to use TOSHIBA HW Setup program to configure your computer and how to set passwords. HW Setup TOSHIBA HW Setup allows you to configure settings for Display, CPU, Boot priority, Keyboard, USB, LAN, General and Password. If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer.
L350/L350D General This window displays the BIOS version and contains two buttons: Default and About. Default Returns all HW Setup values to the factory settings. About Displays the HW Setup version. Setup This field displays the installed BIOS version and date. Password User Password This option allows you to set or reset the user password for power on. Not Registered Changes or remove the password. (Default) Registered Sets the password.
L350/L350D 3. Click the OK button. If the character string you enter matches the registered password, the password option is reset and the display changes to: Not registered If they do not match, the following message appears. You must repeat step 1. Incorrect Password!!! If you enter the password incorrectly three times in a row, the computer need to shut off. You will not be able to access the password option in the HW Setup. In this case you must turn the power off and back on to retry the procedure.
L350/L350D Boot Priority Boot Priority Options This option sets the priority for booting the computer. The Boot Priority Options setting will be like the following You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: U Selects the USB diskette drive. N Selects the network. 1 Selects the primary HDD. C Selects the CD-ROM*. This procedure does not affect the settings.
L350/L350D Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in sleep mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in sleep mode. Enabled Enables the Wake-up on Keyboard. Disabled Disables the Wake-up on Keyboard. (Default) USB Legacy USB Support Use this option to enable or disable USB Legacy Emulation.
L350/L350D 7-6 User’s Manual
L350/L350D Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility.
L350/L350D ExpressCard Installing an ExpressCard The ExpressCard slot is located on the left side of the computer. You can install one ExpressCard in the slot. Windows’ hot-install feature allows you to install ExpressCard while the computer’s power is on. Do not install an ExpressCard while the computer is in sleep or hibernation mode. Some cards might not work properly. To install an ExpressCard, follow the steps below. 1. Insert the ExpressCard. 2. Press gently to ensure a firm connection. 3.
L350/L350D Removing an ExpressCard To remove the ExpressCard, follow the steps below. 1. In Windows Vista™, open the Safely Remove Hardware icon on the system tray and disable the ExpressCard. 2. Press Eject button slightly to make the ExpressCard stretch out. 3. Grasp the ExpressCard and pull it out from the slot.
L350/L350D Installing a SD/SDHC/MS/MS Pro/MMC card To install the memory card, follow the steps below. 1. Insert the memory card. 2. Press gently to ensure a firm connection. SD/SDHC/MS/MS PRO/ MMC CARD* Multiple Digital Media Card Slot *The shape of the card depends on which type you purchased. Figure 8-3 Inserting the memory card ■ Keep foreign objects out of the multiple digital media card slot. A pin or similar object can damage the computer’s circuitry.
L350/L350D Removing a SD/SDHC/MS/MS Pro/MMC card To remove the memory card, follow the steps below. 1. In Windows Vista™, open the Safely Remove Hardware icon on the system tray and disable the inserted memory card. 2. Gently press the memory card inside the socket to eject it. 3. Grasp the card and remove it.
L350/L350D Memory expansion You can install additional memory in the computer’s memory module to increase the amount of RAM. Installing memory module To install a memory module follow the steps below : 1. Turn the computer off in boot mode. Refer to the Turning off the power section in Chapter 3. ■ If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them.
L350/L350D 6. Insert the memory module into the connector on the computer. Press the module carefully and firmly to ensure a solid connection. 7. Push the module down so that it lies flat and is secured by two latches. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. Figure 8-6 Inserting the memory module Figure 8-7 Pushing the memory module down 8. Seat the cover and secure it with one screw. 9.
L350/L350D Removing memory module To remove a memory module follow the steps below : 1. Turn the computer off and remove all cables connected to the computer. ■ If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. ■ Do not try to remove a memory module with the computer turned on or turned off in sleep and hibernation mode. You can damage the computer and the memory module. 2.
L350/L350D Additional battery pack (6 Cell and 9 Cell) You can increase the portability of the computer with additional battery packs (6 Cell: PA3536U-1BRS/PA3536U-1BAS, 9 Cell: PA3537U-1BRS/ PA3537U-1BAS). If you’re away from an AC power source, you can replace a low battery with a fully charged one. See Chapter 6, Power and Power-up Modes.
L350/L350D HDMI (optional) Some models are equipped with HDMI out port than can send/receive video, audio and control signals by connecting with external display/audio devices. 1080p, 720p, 576p and 480p signal formats are supported, but actually available signal format depends on each HDMI devices.
L350/L350D Settings for audio on HDMI To set the audio device to use the HDMI, follow the steps below. 1. Click Start. 2. Click Control Panel. 3. Click Hardware and Sound. 4. Click Sound. 5. Click Playback tab. 6. Click HDMI Device. 7. Click the Set Default button. To set the audio device to use internal speaker, follow the steps below. 1. Click Start. 2. Click Control Panel. 3. Click Hardware and Sound. 4. Click Sound. 5. Click Playback tab. 6. Click Speakers. 7. Click the Set Default button.
L350/L350D 8-12 User’s Manual
L350/L350D Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines: ■ Stop immediately when you recognize a problem exists.
L350/L350D ■ Inspect all connecting cables for loose wires and all connectors for loose pins. ■ Check that your diskette is correctly inserted and that the diskette’s write protect tab is correctly set. Make notes of your observations and keep them in a permanent error log. This will help you describe your problems to your dealer. If a problem recurs, the log will help you identify the problem faster.
L350/L350D Hardware and system checklist This section discusses problems caused by your computer’s hardware or attached peripherals.
L350/L350D Power When the computer is not plugged into an AC adaptor, the battery pack is the primary power source. However, your computer has a number of other power resources, including intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems. This section provides check lists for AC adaptor and the main battery. If you cannot resolve a problem after following them, the cause could lie with another power resource.
L350/L350D Battery If you suspect a problem with the battery, check the DC IN indicator as well as the battery indicator. For information on indicators and battery operation see Chapter 6, Power and Power-up Modes. Problem Procedure Battery doesn’t power the computer The battery may be discharged - connect the AC adaptor to recharge the battery. Battery doesn’t charge when the AC adaptor is attached (Battery indicator does not glow orange).
L350/L350D Password Problem Procedure Cannot enter password Refer to the Password section in Chapter 7, HW Setup and Passwords. Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard and Chapter 7, HW Setup and Passwords. Problem Procedure Some letter keys produce numbers Check that the numeric keypad overlay is not selected. Press FN + F10 and try typing again.
L350/L350D Hard disk drive Problem Procedur Computer does not boot from hard disk drive Check if a diskette is in the diskette drive or a CD/DVD is in the optical disc drive. Remove any diskette and/or CD/DVD and check Boot priority. Refer to Chapter 7, Boot Priority section. There may be a problem with your operating system files. Refer to your OS documentation. Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk.
L350/L350D Problem Procedure Some CD/DVDs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware not configuration matches your software’s needs. Check the CD/DVD’s documentation. Check the type of CD/DVD you are using. Refer to Chapter 1, Introduction, for more information. Check the region code on the DVD. It must match that on the drive. Region codes are listed in the Optical disc drive section in Chapter 2, The Grand Tour.
L350/L350D Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. Touchpad User’s Manual Problem Procedure On-screen pointer does not respond to Pad operation The system might be busy. If the pointer is shaped as an hourglass, wait for it to resume its normal shape and try again to move it. Double-tapping does not work Try changing the double-click speed setting in the mouse control utility. 1.
L350/L350D USB mouse This section applies only with Windows Vista™ operating systems. Problem Procedure On-screen pointer does not respond to mouse operation The system might be busy. If the pointer is shaped as an hourglass, wait for it to resume its normal shape and try again to move it. Make sure the mouse is properly connected to the USB port. Double-clicking does not work Try changing the double-click sped setting in the mouse control utility 1.
L350/L350D SD/SDHC/MS/MS Pro/MMC card Refer also to Chapter 8, Optional Devices. Problem Procedure Memory card error occurs Reseat the memory card to make sure it is firmly connected. Check the card’s documentation. You cannot write to the memory card Make sure the card is not write protected. You cannot read a file Make sure the target file is on the memory card inserted in the slot. If problems persist, contact your dealer.
L350/L350D Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. Make sure the headphone connection is secure. Check Windows Device Manager. Make sure the sound function is enabled and that settings for I/O address, Interrupt level and DMA are correct for your software and do not conflict with other hardware devices that you may have connected to the computer. If problems persist, contact your dealer.
L350/L350D Modem User’s Manual Problem Procedure Communication software can’t initialize modem Make sure the computer’s internal modem settings are correct. Refer to Phone and Modem Options in the Control Panel. You can hear a dial tone but can’t make a call If the call is going through a PBX machine, make sure the communication application’s tone dial detection feature is disabled. You can also use the ATX command.
L350/L350D Sleep/Hibernation Problem Procedure The system will not enter sleep/hibernation Is Windows Media Player open? The system might not enter sleep/hibernation, if Windows Media Player is either playing a selection or finished playing a selection. Close Windows Media Player before you select sleep/ hibernation. If problems persist, contact your dealer. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN HUB.
L350/L350D Recovery discs Problem Procedure The following message appears when executing Recovery Disc Creator. [The Recovery Disc Creator can not be launched because there is no recovery partition.] You will see this message if you have previously chosen to remove the partition and are trying to create Recovery Media. When there is no recovery partition, the Recovery Disc Creator cannot make Recovery Media.
L350/L350D 9-16 User’s Manual
L350/L350D Chapter 10 Disclaimers This chapter slates the Disclaimer(s) information applicable to TOSHIBA computers. CPU Central Processing Unit (CPU) Performance Disclaimer.
L350/L350D 64-Bit Computing. 64-bit processors are designed to take advantage of 32 and 64 bit computing. 64-Bit Computing requires that the following hardware and software requirements are met: ■ 64-bit Operating System ■ 64-bit CPU, Chipset and BIOS (Basic Input/Output System) ■ 64-bit Device drivers ■ 64-bit applications Certain device drivers and/or applications may not be compatible with a 64-bit CPU and therefore may not function properly.
L350/L350D HDD drive capacity 1 Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 230 = 1,073,741,824 bytes, and therefore shows less storage capacity. Available storage capacity will also be less if the product includes one or more pre-installed operating systems, such as Microsoft Windows and/or pre-installed software applications, or media content.
L350/L350D Copy protection Copy protection technology included in certain media may prevent or limit recording or viewing of the media. Images All images are simulated for purposes of illustration. LCD brightness and eye strain Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes.
L350/L350D Appendix A Specifications This appendix summarizes the computer’s technical specifications.
L350/L350D Built-in modem The ability of this feature is depending on the model you purchased. Network control unit (NCU) Type of NCU AA Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications A-2 Communication system Data: Fax: Full duplex Half duplex Communication protocol Data ITU-T-Rec (Former CCITT) Bell Fax ITU-T-Rec (Former CCITT) V.21/V.22/V.22bis/V.32 /V.
L350/L350D Appendix B Display Controller Display controller The display controller interprets software commands into hardware commands that turn particular pixels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors. A high-resolution external monitor connected to the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16M colors.
L350/L350D B-2 User’s Manual
L350/L350D Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications User’s Manual Form Factor ■ Mini Card Compatibility ■ IEEE 802.11 Standard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.
L350/L350D Radio characteristics Radio characteristics of Wireless LAN cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4 GHz and 5 GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
L350/L350D Supported frequency sub-bands Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in your country/region. Table Wireless IEEE 802.11 Channels Sets (Revision B and G) Frequency Range Channel ID 2400-2483.
L350/L350D Table Wireless IEEE 802.
L350/L350D Appendix D AC Power Cord and Connectors The AC input plug of power cord must be compatible with various international AC power outlets. Power cords need to meet the local standards and the specifications listed as below: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.
L350/L350D For the United States and Canada, two pin plug configuration must be 2-15P (250V) or 1-15P (125V); while three pin be 6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for USA, Australia, Canada, United Kingdom, Europe, and China.
L350/L350D Appendix E If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office.
L350/L350D TOSHIBA Theft Registration Send to: Fax number: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. L350/L350D) Model number: (e.g. PPM70EYXT) Serial number: (e.g.
L350/L350D Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
L350/L350D HDD: hard disk drive IDE: integrated drive electronics I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MB: megabyte OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock SCSI: small computer system interface SIO: serial input/ou
L350/L350D analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted. Voice communications are analog signals. ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements. antistatic: A material used to prevent the buildup of static electricity.
L350/L350D byte: The representation of a single character. A sequence of eight bits treated as a single unit; also the smallest addressable unit within the system. C cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
L350/L350D components: Elements or parts (of a system) which make up the whole (system). Composite Video (YUV): A standard video signal used to transmit images, e.g. from a VCR to a TV. computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information.
L350/L350D dialog box: A window that accepts user input to make system settings or record other information. Digital Audio: An audio compression standard that enables high-quality transmission and real-time playback of sound files. disk drive: The device that randomly accesses information on a disk and copies it to the computer’s memory. It also writes data from memory to the disk. To accomplish these tasks, the unit physically rotates the disk at high speed past a read-write head.
L350/L350D E echo: To send back a reflection of the transmitted data to the sending device. You can display the information on the screen, or output it to the printer, or both. When a computer receives back data it transmitted to a CRT (or other peripheral device) and then retransmits the data to printer, the printer is said to echo the CRT. erase: See delete.
L350/L350D H hard disk drive (HDD): An electromechanical device that reads and writes a hard disk. See also hard disk. hard disk: A non-removable disk usually referred to as drive C. The factory installs this disk and only a trained engineer can remove it for servicing. Also called fixed disk. hardware: The physical electronic and mechanical components of a computer system: typically, the computer itself, external disk drives, etc. See also software and firmware.
L350/L350D J jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys. Each keystroke activates a switch that transmits a specific code to the computer.
L350/L350D modem: Derived from modulator/demodulator, a device that converts (modulates) digital data for transmission over telephone lines and then converts modulated data (demodulates) to digital format where received. monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images. See also CRT. motherboard: A name sometimes used to refer to the main printed circuit board in processing equipment.
L350/L350D parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1. 2) In serial communications, an error detection bit that is added to a group of data bits making the sum of the bits even or odd. Parity can be set to none, odd, or even. password: A unique string of characters used to identify a specific user. The computer provides various levels of password protection such as user and supervisor.
L350/L350D restart: Resetting a computer without turning it off (also called “warm boot” or “soft reset”). See also boot. RGB: Red, green and blue. A device that uses three input signals, each activating an electron gun for a primary additive color (red, green and blue) or port for using such a device. See also CRT. RJ11: A modular telephone jack. RJ45: A modular LAN jack. ROM: Read Only Memory: A nonvolatile memory chip manufactured to contain information that controls the computer’s basic operation.
L350/L350D T terminal: A typewriter-like keyboard and CRT display screen connected to the computer for data input/output. TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. touchpad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
L350/L350D Glossary-14 User’s Manual
L350/L350D Index A C AC adaptor, 1-5, 2-4, A-1 DC IN 19V port, 2-4 additional, 1-12, 8-9 connecting, 3-2 problems, 9-4 safety instructions, -iii, -xviii ASCII characters, 5-5 Auto power on, See Power Checklist equipment, 1-1 problems, 9-1, 9-3 Cleaning the computer, 4-25 COM port, 4-21 B Battery charging, 6-7 indicator, 2-10 life, 10-2 monitoring capacity, 6-9 real time clock, 6-4 Real Time Clock battery, 1-5, 6-4 retention time, 6-10 types, 6-3 Battery pack, 1-5, 1-12, 6-3 additional, 8-9 extending ba
L350/L350D E ExpressCard, 1-5 location of slots, 2-2 overheating, -xviii problems, 9-10 using, 8-2 External monitor, 8-9 controlle, B-1 HW Setup, 7-3 port, 1-5 problems, 9-11 F FN + 1 (TOSHIBA zooming utility reduce), 5-4 FN + 2 (TOSHIBA zooming utility enlarge), 5-4 FN + ESC (sound mute), 5-2 FN + F1 (lock), 5-2 FN + F2 (power plan), 5-2 FN + F3 (sleep), 5-3 FN + F4 (hibernate), 5-3 FN + F5 (output), 5-3 FN + F6 (brightness down), 5-3 FN + F7 (brightness up), 5-3 FN + F8 (wireless), 5-3 FN + F9 (touchpad
L350/L350D L LAN, 1-6, 4-24 cable types, 4-24 connecting, 4-24 disconnecting, 4-25 indicator, 4-25 Lock, security, See Security lock M Main battery, See Battery pack Memory, 1-2, 10-2 expansion, 1-12, 8-6 installing module, 8-6 removing module, 8-8 Microphone, 1-5 problems, 9-12 using, 4-16 Microprocessor, See Processor Modem, 1-6, 4-20, A-2 connecting, 4-22 disconnecting, 4-22 problems, 9-13 properties menu, 4-21 region selection, 4-20 Moving the computer, 4-26 Multiple digital media card slot using, 8-3
L350/L350D R T Real Time Clock battery, See Battery Recovery Discs, 3-10 Recovery hard disk drive, 3-8, 3-10 Restarting the computer, 3-7 TOSHIBA Assist, 1-10 TOSHIBA Disc Creator, 4-10 TOSHIBA PC Diagnostic Tool, 1-9 TOSHIBA support, 9-15 TOSHIBA Theft Registration, E-2 TOSHIBA zooming utility, 1-9 Touchpad using, 4-1 S Security lock attaching, 8-11 location, 2-4 using, 8-11 Sleep mode, 1-9 problems, 9-14 setting, 3-6 Sound system, 1-6 headphone, 1-5, 2-2 microphone, 2-2, 5-2, 5-3, 5-4 speaker, 2-7 vo
