TOSHIBA introduction 0 VIDEO _ OleiT_LAUOiO D FsrPURE | G I T A L Digital0ut Comb Filter @ur¢" Connections COMBINATION FLAT COLOR TELEViSiON AND DVD VIDEO PLAYER D14H63 D20H63 D24H63 MANUAL l{ustration of MD14H63 @2007 Toshiba Corporation This device does not tape-record copy protected DVD viaeo alscs.
Dear Customer_ Thank you for purchasing this Toshiba TV. This manual will help you use many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions WARNING TO REDUCE THE RiSK OF FiRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: To REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTSINSIDE.
iMPORTANT SAFEGUARDS importantSafetyinstructions 1) Read these instructions. installation,Care, and Service Installation 2) Keep these instructions. Follow these recommendations and precautions and heed all warnings when installing your TV: 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus 16) Never modify this equipment.
IMPORTANT SAFEGUARDS 25) Always operate this equipment from a 120 V AC, 60 Hz power source only. _- _ ___ 32) For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time. 26) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).
;AFETY PRECAUTION/Power WARNING: source This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
[] When shipping the unit, the original shipping carton and packing materials come in handy. For fully protection, repack the unit as it was originally packed at the factory. [] Do not use volatile liquids, such as insect spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long time. They will leave marks on the finish. [] The top and rear panels of the unit may become warm after a long period of use. This is not a malfunction.
Introduction iMPORTANT SAFEGUARDS ............................. SAFETY PRECAUTION ..................................... Power source ..................................................... Precautions ........................................................ Contents ............................................................ Notes and information ........................................ identification of controls ................................... Basic 3 5 5 6 7 8 10 Connections Antenna connections .....
tes and Information ® Do not touch the playback side of the disc. Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks. /( 0 ..... "'_ DVD video disc Playback side DVD video disc Title 2 ® Do not attach paper or tape to discs. Chapter 1 Chapter 2 X Video CD/Audio Video CD/Audio CD ® Fingerprints and dust on the disc cause picture and sound deterioration.
=-2 a This unit can play the following Disc Mark discs. Contents Audio + Video DVD video discs v I D Eo (moving pictures) Disc Size 12cm 8 cm Audio Approx.4 hours (singlesideddisc) Approx.8 hours (doublesideddisc) Approx.80 minutes (singlesideddisc) Approx.160minutes (doublesideddisc) Approx.74 minutes £ I_,lh': may appear on the TV screen during operation. A" II "means that the operation is not permitted by the unit orthe disc.
of controls See the page in _ for details.
g a The instructions in this manual describe the function on the remote control. See the page in [_ OPEN/CLOSE for details. button POWER button [_ TV/DVD button Direct channel Selection buttons (0-9) SLEEP button 1_ I_ Number buttons (0-9) I_ [_ DISPLAY button I_ [_ -- - button ID !. CH/_,/V ® DISPLAY JUMP JUMP button [_ buttons -- SUBTITLE button I_ INPUT button ZOOM button I_ PLAY MODE button VOL +/- buttons I_ AUDIO SELECT button [_ PLAY MODE -- MUTE button [_ .
of controls (Continued) Install two "RO3/AAA" batteries compartment Open the battery cover in the direction of the arrow. cover. Replace the compartment (supplied), paying attention to the polarity diagram in the battery compartment. Caution: Never throw batteries into a fire. Notes: • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind.
tenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see Cable TV connections _. Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack. O Antenna jack o Antenna jack If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matching transformer (not supplied) may be necessary.
ble TV connections This unit has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer "premium pay channels" inwhich the signal is scrambled. Descrambiing these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
@nneetmg -0-3 INPUT -- CH ^/v _,/_, to optional equipment Before connecting the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. You can enjoy the camcorder or high quality dynamic sounds of DVD video discs or audio CDs by connecting the unit to optional audio equipment. .................. ENTER Press INPUT. Press A/'v or Number buttons (0-3) to select the desired mode, then press ENTER.
_ ¸¸¸¸5 • nneetmg to optional equipment (Continued) Youcan enjoy high quality dynamic sounds by connecting the • This section uses the following reference mark. unit to optional audio equipment. _ :Front speaker :Rear speaker :Sub woofer B ! r4 : Center speaker _ : Signalflow Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home.
MPEG2 sound You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor. 0 o tB o A'_mplifierequipped with a_] 2PEG2 audio deeodej type digital To COAXIAL DIGITAL audio input To COAXIAL l AUDIO OUT 75 O coaxial cable (not supplied) Use DVD video discs encoded via the Dolby Digital recording system.
_l_*_I setttp The STARTING SETUP function help to install your unit easily. It leads you to the Language selection, TV/CABLE selection and auto channel memory automatically. iMPORTANT: Make sure that the antenna or cable TV system connection is made! 1 Press POWER. The starting setup function begins and the Language setup menu appears on the screen. Press A or T to select your desired language, then press ENTER. After the starting Now "CH PROGRAM" setup is completed, starts.
ek setting Example: Setting the clock to "8:30 AM", 31th. (SAT) March, 2007. w Set theENTER. press day, year and time as in step 3, then o option. Press MENU, then press _ or _ to select MENU SETUP 0 After setting automatically. functioning the clock, date and time starts Press A or T to select "CLOCK SET", then press _. ® ® [] To make corrections anytime during the process Press A or T repeatedly until the item you want to change blinks, then set the item again.
_ _ttmg the langttage/ operation status • • This unit can display the on screen language Spanish or French. option. Press MENU, then press in English, f While watching TV Press DISPLAY to display screen. the information on the When the TV receives a digital signal, press once, the digital information will appear. _ or _ to select Program name MEnU SETUP 0 Channel number _ -- Clock Station _. name -- V-Chip Content rating Press _, or T to select "LANGUAGE/IDIOMN LANGUE", _.
C2;C2iC27 1 5 To turn on the unit, press POWER. The power indicator will light. * Every time you turn on the TV, the unit starts from TV mode. When you use TV after DVD operation, press TV/DVB. powE. \ I / Illustration of MD14H63 (0-9) or Direct and = channel button selection to select the o =o o 2_ For example, to select channel 125, press 1,2,5. Adjust the volume level by pressing VOL +/-.
operation (Continued) f [] CHANNEL UP/DOWN [] SLEEP Press and release CH ^ / v.The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See page [_ "To memorize channels". To set the unit to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count down 10 minutes for each press of SLEEP (120, 110, ... 10, 0).
captions WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display closed captioned television programs. Closed captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. analog themode. Tune unit to Press the desired MENU, then channel pressin 4 theor to select _ option.
captions (Continued) Tune the unit to the desired channel digital mode. Press MENU, then select _ option. in the press 4 or to 1 Follow Press press steps 1-2 on the left. A or v to select _. "CC ADVANCED", then MENU SETUP O Press _. press • or T to select "DiGiTAL SETUP", then Press Athen adjust, or Tpress to select _. the desired item to ® ® then Press press A or _. v to select "CLOSED CAPTION", Press ENTER.
memorize channels This unit is equipped with a channel memory feature which allows channels to skip up or down to the next channet set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the unit's memory.To use this unit with an antenna, set the TV/CABLE selection to the TV position. When shipped from the factory, this selection is in the CABLE position. Press MENU in the TV mode, then press _ or to select _ option. .................. C H ^/v ...........
memorize channels (Continued) After you have programmed the channels automatically, 'ou can add or erase specific channels manually. Press MENU in the analog or _ to select _ option. mode, then After you have programmed the channels automatically, _ou can add or erase specific channels manually. press Press digital mode, then press or _ toMENU select in the option. _u S_TU_ O O Press press Press _. press A or T to select "ADD/ERASE', • or v to select _.
the V-Chip An age limitation can be set to forbid children to watch programs according to "TV RATING" and "MOVIE RATING" level set. To use the V-Chip function, you must register a password. Notes: * If you forget the password, you cannot set the V-Chip. I * To avoid forgetting the password, write it down and keep in the safe p ace. I_ress _ press IVI_:NU, or =,-to then se ect _ option. in the V-CHIP "CHANGE PASSWORD", menu, pressthen A orpress v to _.
; tttng 1 the V-Chip (Continued) in the V-CHIP menu, press _, or v to select "V-CHIP SET", then press _. Press 4 press A or _T to to select twice.
As a supplement to the standard V-Chip rating system, your Toshiba Television will be able to download an additional rating system, if such a system becomes available in the future. 1 PLEASE In theV-CHIP menu, press A or T to select CHiP SET (DTV)", then press _. (You cannot select this feature if the TV is not receiving a digital signal for the current station.) "V- NOTE THE FOLLOWING: * You can only download the additional V-Chip rating system when your TV is receiving a digital signal. .
_ _eture control at_ustment Picture controls are factory preset but you can adjust them individually as follows: Press MENU, then press option, then press v. ,_ or _ to select MENU SETUP 0 Press or Tpress to select you the wantsetting. to adjust, Athen 4 or the _ toitem adjust ® ® BRIGHTNESS CONTRAST COLOR TINT SHARPNESS darker lower paler reddish softer lighter higher deeper greenish shar er Note: The CONTRAST default setting is set to maximum (+32) at the factory. is cleared.
ewmg the wide-screen picture formats You can view 480i format programs in a variety of picture sizes--4:3, 16:9, ZOOM. The way the image displays in any of the picture sizes witi vary depending on the format of the program you are viewing. Select the picture size that displays the current program the way that looks best to you. PIC SIZE Press PIC SIZE repeatedly on the remote control cycle among the three picture sizes, as described below. F4:3 ._ 16:9 4.
reo and Second Audio Program (SAP) The unit is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes. Press or _ to MENU select in_ the option.
_ _tting the digital setup (digital mode) When two or more audio languages are included in a digital signal, you can select one of the audio languages, or Press _ toMENU select in_4:tile option. digital mode, then press - 0-7 You can check the strength of the digital signal by viewing the digital signal meter, ,_ Follow steps 1-2 on the left. -4 ,< o Press _• to press or check _ to select the digital "SIGNAL signalMETER", strength.then d ii ti) i_ o Press _.
_ _tng the auto shut off feature In case of "AUTO SHUT OFF" is "ON", if a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes. Press MENU, then press 4 or _ to select option. (Analog mode) ® ® (Digital mode) select SHUT Press "AUTO A or T to OFF", then press 4 or _ to select "ON" or "OFF". (Analog mode) (Digital mode) is cleared.
mg a also This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. Illustration of MD14H63 1 3,5 5 6 Preparations: Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. If the AC cord plug is plugged in for the first time, you need to set "Starting setup" _. When connecting to other equipment, turn power off. control to turn on on the the unit unit.
a disc (Continued) [] To pause playback (still [] To remove the disc Press OPEN/CLOSE. mode) Press PAUSE during playback. PAUSE To resume normal playback, PLAY. PLAY CE) [] press OPENICLOSE (_) Remove the disc after the disc tray opens completely. The sound is muted during still mode. To stop playback Press STOP. STOP (]E) Be sure to press OPEN/CLOSE after you remove the disc.
PAUSE PLAY FF SKIP I_ / _,1 SLOW II_ REV in fast Press REV or FF during (_ (_ reverse or fast forward directions playback. REV: Fast reverse playback FF: Fast forward playback Each time you press REV or FF, the playback speed changes. Notes: • The unit mutes sound during reverse and forward scan of DVD/VCD video discs. ° The playback speed may differ depending on the disc. w 6") o Press PLAY. PA_ Each time you press PAUSE, the PAUSE during still playback. (_ picture advances one frame.
.... omm DISPLAY oca#ng desired scene 0-9 ZOOM JUMP CANCEL ENTER f_ Zooming" / _ This unit will allow you to zoom in on the frame image.You can then make selections by switching the position of the frame. Press ZOOM during The center part of the image will be O zoomed in. Each press of ZOOM will change the ZOOM O.1 (x 1.3), 0,2 (x 1.5) and 0` 3 (x 2.0). desired scene Use the title, chapter and time recorded on the DVD disc to locate the desired point to playback.
: rkmg destred scenes The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene. CANCEL ENTER MARKER Press MARKER during playback or stop mode. _ARKER CD Press4 or _ to select the Marker 1-3. Select press ENTER the blankat the Marker desired usingscene. _ or _, then • Up to 3 scenes can be selected. • Repeat this procedure to set the other 2 scenes. < Press ENTER. Playback starts from the marked scene.
eat playbaek/A-B CD_227 ,;Z_)ili Repeat playback _iii?_iiiii?_:2 _iii PLAY MODE : ENTER ,back mode. Press PLAY MODE during playback A-B repeat playback allows you to repeat a section between two selected points. or stop PLA_MOOE Press REPEAT A-B during playback. The start point is selected. _Ep_ATA-B EZ] O Press 4/_[DVD] repeatedly to select "Chapter" or "Title". The unit automatically starts repeat playback after finishing the current title or chapter. Press REPEAT A-B again.
ogram ii o oo playback/Random playback -- 0-9 You can arrange the playback order of tracks or files on the disc. And also the unit can playback tracks or files in random order.These feature works for Audio CD, Video CD and JPEG CD. -- PLAY MODE ENTER -- A/_,/4/_ -- CANCEL ......... PLAY SKIP _,4 Program playback: Press PLAY MODE PLAY in the stop mode. Presspress and _,/T/_/_ ENTER. to select "Program Playback" tdODE © Press _repeatedly ENTER or _ to select to select Play Mode, "Program".
angmg" angles/Title seleetion/D VD menu L_) (_2_ (2) iii ENTER A/v/,q/_ DVD MENU PLAY When playing back a disc recorded Press ANGLE during with multi-angle facility, you can change the angle that you are viewing the scene from. playback. angle is selected. The current angle will appear. A_LE ANGLE CD I PressCD ANGLE repeatedly until the desired Note: Depending angles ® Two or more titles are recorded on some discs.
anging soundtraek language/ titles You can select the language when you play a multilingual disc. SUBTITLE AUDIO SELECT When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off. Press AUDIO SELECT during playback. _u0,0saEc_ The current soundtrack language will O Pressthe until SUBTITLE desired language repeatedlyisduring selected. playback appear. SUBTITLE O To turn off the subtitle, press SUBTITLE until "Off" appears.
@sc status/To turn Press DISPLAY during of the disc will appear the figure below. off the PBC ......... 1 playback. The status display on the screen in order like Press DISPLAY PLAY MODE PLAY MODE in the stop pLAy mode. NOD_ O DISPLAY Press _/_ to select Play Mode, then ENTER repeatedly to select "Off". press DVD Title elapsed playing time Title total time Chapter number '_ Press PLAY MODE again ® Subtitle language to clear the screen.
: G CD reformation his unit can playback the JPEG-data which has been recorded need a Windows-PC with CD-R/RW drive and a JPEG-encoding The Apple-HFS-System cannot be played. on CD-R or CD-RW.To produce the OPEG-data, you Software (not supplied). This player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality. There are many different types of recordable disc formats (including CD-R containing JPEG files).
GcD playbach u can select your desired JPEG file on the file menu and picture menu. The selected JPEG file is automatically adjusted to the TV screen. (When the aspect ratio of the JPEG file is different to your TV screen, the black bar will appear at the top and bottom, or the both sides of the TV screen). OPEN/CLOSE. Place a JPEG disc on the disc tray, then The slide show enables you to view pictures (files) one after another automatically.
_,_stomtzmg "_ the function settings You can change the default settings to customize performance to your preference. 1 Press SETUP during stop mode RETURN. To clear SETUP screen, press SETUP or _NU 0 s_u_ The following on-screen display appears. MEt_U S_TUP 0 []@[]@ RE_URN E_ _ll!l_/Enter/Setu p/Return Press _ orENTER. pressTor _* to select the desired section, then ® "33 0 Press A or v to select the desired option. "13 Change to the corresponding the selection using 4_ or~ __.
stomtzmg" " the function Section Option Details Menu Subtitle Audio To select the language of "Menu", "Subtitle" and "Audio" if more than one language are recorded on the disc. TV Screen To select a picture size according to the aspect ratio of you r TV. Display Picture ® settings (Continued) Page To turn On or Off the operational screen. status display on the Mode To select a preferred "Auto".
[]@[]@ Menu Subtitle Audio TV Screen Display Picture Mode JPEG IntervN English Engfish AT/Setup/Return m Menu, Subtitle, AT/Setup/Return [] TV Screen Audio You can select the language of "Menu", "Subtitle" and "Audio" if more than one languages are recorded onto the disc. You have the following Other: Other language can be selected (see "Language 4:3 E] : (Pan & scan) It displays the wide picture on the whole screen with left and right edges automatically cut off. code list" {_).
stomtzmg" " the function settings (Continued) [] Picture Mode []@[][] There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed. Auto: Film: ® Video: DRC AT/Setup/Return [] DRC Select this selection normally.
[] To change [3aN3o@ [3a[_[3tal [3e1_[_'t[]2][_[3 AT[E_F_E_e_ [] Parental control [3[m [311 _[3el_etu[3@ etu@ setting Some discs are specified as not suitable for children• Such discs can be limited not to playback with the unit. 1) Press A or T to select "Parental", then press 4 or until the parental level you require to appear. • Level Off: The parental control setting does not function• • Level 8: All DVD software can be played back. . Level 1 : DVD software for adults cannot be played back.
OPEN/CLOSE 0-9 mporary cancel the rating level by D VD C Depending on the DVD disc. the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. A/v ENTER PLAY RETURN Load on the a unit DVD _.disc and press PLAY or OPEN/CLOSE Then Enter press the password ENTER. with Number buttons (0-9). To exit from the entry, press RETURN.
.guage code#st Enter the appropriate ® code number for the initial settings "Menu", "Subtitle" and/or "Audio" _.
Check the following guide for the possible cause of a problem before contacting service. r SYMPTOMS POWER No power, CAUSE POSSIBLE SOLUTIONS The AC power cord is not connected, IPAGE_ outlet,C°nnect the AC power cord to the AC 5 Try another channel. 21 Picture control is not adjusted. Check picture control adjustments. 30 Possible local interference. Check for source of reception disturbance. 56 Antenna (CABLE) connector is not connected or possible local interference.
r SYMPTOMS CAUSE POSSIBLE SOLUTIONS I PAGE_ DVD The playback picture has occasional distortion. The unit does not start playback. Playback does not follow the course of the disc's program. "appears REMOTE on the screen. Remote control does not I 5YS0101A indb 55 Eject the disc and clean it. It is in fast forward or fast reverse playback. Sometimes a small amount of picture distortion may appear. This is not a malfunction. No disc is inserted. Insert a disc.
c on disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below, if one of these symptoms appear when the unit is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.
MD14H63 Model MD2OH63 MD24H63 General AC 120 V 60 Hz Power supply Power consumption Operation: 95 W 120 W 140 W 3W 3W 3W Picture tube 14 inches (355.6 mm) 20 inches (508.0 mm) 24 inches (600.0 mm) Speaker 1-1/2 x 2-11/16 inches (38.1 x 68.6 mm), 8 _Qx 2 1-13/16 x 3-7/8 inches (45.7 x 99.1 mm), 8 _ x 2 Stand by: Audio output power 1.0 W + 1.0 W Weight 29.8 Ibs (13.5 kg) 55.1 Ibs (25.0 kg) 75.0 Ibs (34.
mtted United States VVarranty for model MD14H63/MD20H63/MD24H63 ("TV Combination") Toshiba America Consumer Products, LLC. ("TACP") makes the following limited warranties to original consumers in the United States. THESE LiMiTED WARRANTIES EXTEND TO THE ORIG_NAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TV COMBINATION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. TV COMBINATIONS PURCHASED iN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A.
Your Responsibility THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS: (1) You must retain your original bill of sale or provide other proof of purchase. (2) All warranty servicing of this TV Combination must be performed by an Authorized TACP Service Station. (3) The warranties from TACP are effective only if this TV Combination is purchased and operated in the Continental U.S.A. or Puerto Rico.
I ÷ I ® ® TOSHIBA TOSH|B_ AMERICA CONSUMER PRODUCTS_ L,L,C. FST Pure is registered trademark of Toshiba America Consumer Products, L.L.C.
