USER MANUAL M74** Digital Series L74** Digital Series
English Contents Using 3D functions ..................................................... 32 Viewing 3D images ............................................. 32 Switching display mode or selecting 3D format ......................................................... 33 Setting the auto start mode................................. 34 Adjusting 2D to 3D Depth ................................... 35 Setting the 3D PIN code ..................................... 35 Setting 3D Start Message .........................
TEXT SERVICES Text services .............................................................. 89 Selecting modes ................................................. 89 Text information .................................................. 89 Navigating pages using Auto .............................. 89 Navigating pages using LIST .............................. 89 Control buttons.................................................... 90 PROBLEM SOLVING Questions and Answers ..........................................
English During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance: If your TV is connected to the internet, firmware will be automatically made available. If your TV is not connected to the internet, you can download the latest version of firmware from www.toshiba-om.net/firmware.php *Some features are limited due to local legislation and may not be available in all countries.
INSTALLING YOUR TV DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS. This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.
English INSTALLING YOUR TV Installation and important information Where to install Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Stand style is dependent on model Place the TV on a stable, level surface that can support the weight of the TV.
INSTALLING YOUR TV The digital reception function of this television is only effective in the countries listed in the “Country” section of the “Installation” menu. Depending on country/area, some of this television’s functions may not be available. Reception of future additional or modified services can not be guaranteed with this television. If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on-screen menus, etc.
English INSTALLING YOUR TV The remote control 19 20 Simple at-a-glance reference of your remote control.
CONNECTING YOUR TV English Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. DVB Common Interface (for Conditional Access Module (CAM)) ILLUSTRATION SHOWS 42L.
English CONNECTING YOUR TV Connecting an HDMI® device HDMI’s ARC (Audio Return Channel) feature The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device. This input is designed to accept HDCP (High-Bandwidth Digital Content Protection) programme material in digital form from EIA/CEA-861-D–compliant consumer electronic devices (such as a set-top box or DVD player with HDMI output). For acceptable video signal formats, see page 95.
CONNECTING YOUR TV You can control the basic functions of connected audio/video devices using the television’s remote control if you connect an HDMI CEC compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 86–87. the side of your television AV amplifier Playback device Playback device For the setup shown above, you will need three HDMI cables. NOTE: • If several devices are connected, the HDMI CEC Control feature may not operate properly.
English CONNECTING YOUR TV Connecting a computer To connect a PC to the RGB/PC terminal With either an HDMI or an RGB/PC connection, you can watch your computer’s display on the television. When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable. the back of your television To connect a PC to the HDMI terminal Computer When connecting a PC to the HDMI terminal on the television, use an HDMI cable (type A connector).
CONNECTING YOUR TV The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a media server and play/ display them on your TV. NOTE: • If you connect to a shared network outside your home, it is advisable to use a router. Always use network media products in private network environments. Connect this TV to the same router as other network media products (server).
English CONNECTING YOUR TV To connect the TV to the Device with Intel® WiDi / wireless display Available wireless channel is restricted in the following range in case that you use the Intel® WiDi / wireless display. 2.
CONNECTING YOUR TV English Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. ILLUSTRATION SHOWS 42L. DVB COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). Contact a service provider.
English CONNECTING YOUR TV Using the menu system Press Press B / b Press B / b and OK or c Recording Setup on the remote control to display the menu. The menu appears as a list of eight topics. As each icon is selected by pressing B / b on the remote control, its respective options will appear on the right.
SETTING UP YOUR TV d Before switching on the TV make sure that your aerial is connected and any decoder / media recorder, if applicable is connected and in Standby. Press BbC c to highlight Next and press OK. The Location screen will appear. Quick Setup Quick Setup b Smart TV Press the 1 button, Toshiba logo will appear. After that, The Menu Language screen will appear. This screen will appear the first time that the television is switched on and each time Reset TV is executed.
English SETTING UP YOUR TV There are 3 methods for Wireless Setup: - AES, AES/TKIP: 8-63 ASCII or 64 Hex characters - WEP: 5 or 13 ASCII or 10 or 26 Hex characters • There is only one key ID to set for WEP encryption. • Easy Setup - If the AP supports Wi-Fi Protected Setup, this method can be used. Wi-Fi Protected Setup is an industry standard designed to make connection of wireless LAN equipment and security setup easy. Wi-Fi Protected Setup will automatically configure all wireless settings.
SETTING UP YOUR TV When Encryption is WEP, Key ID setting is available. Press B / b to select Key ID and press c and B / b to select 1 (default), 2, 3 or 4. Press B / b to highlight Done and press OK. When the message “Wireless configuration is complete.” appears on screen, press OK. NOTE: Settings are not saved if BACK is pressed before Done is selected. n p Press OK, and Power Management screen will appear. Press B / b to highlight the External Record Control.
English SETTING UP YOUR TV v The setting LNB Power enables you to switch on or off the LNB’s power supply by means of the TV. When your satellite dish consists of only one LNB, LNB Power should generally be activated (On). When using more than two LNBs, it is recommendable to use external power supply for these. Press B / b to move through the list to select a channel, and then press OK to view. In ATV mode, some areas may receive duplicate stations.
SETTING UP YOUR TV Single Cable Settings Satellite Settings User Slot Number Switch Type None LNB Power On No. Satellite Dish 1 Astra 19.2E 1 0 User Slot Frequency 1284 Password PIN None LNB Verify Slot Frequency 1 2 Done 3 4 y Transponder : 1/120 (10729) MHz Dish Type : Fixed Lower LOF : 9750 Upper LOF : 10600 If the reception testing completes successfully, the Auto Tuning startup screen will display.
English SETTING UP YOUR TV Operator Selection: Ant/Cable/Satellite (if available) You can choose the Cable operator depending on the Country you set. From this menu, you can set the RF input configuration. a Press icon. b Press c and B / b to select Channel Tuning and press OK. c Press B / b to select Ant/Cable/Satellite and press OK. DTV Start Frequency: Press B / b to select Antenna, Cable or Satellite. DTV End Frequency: Press B / b to highlight Next and press OK.
SETTING UP YOUR TV From the System Setup menu, you can add the satellites that you wish to tune and configure detailed settings for each one individually. To add a satellite: a Press icon. b Press c and B / b to select Channel Tuning and press OK. c To edit the satellite settings: a In the Satellite Settings menu, press c to edit Switch Type. b Press B / b to select None, ToneBurst, DiSEqC 2way, DiSEqC 4way or Single Cable as your satellite switch type.
English SETTING UP YOUR TV To delete a transponder: c a In the Transponder Settings menu, press B / b to highlight the line you want to delete. b Press the RED button. Press B / b to select Lower LOF or Upper LOF and use the number buttons (0-9) to input the appropriate frequencies. Auto Tuning NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them.
SETTING UP YOUR TV a Tuning In the Channel Tuning menu, press b to select ATV Manual Tuning and press OK. < Channel Tuning Ant/Cable/Satellite The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/ decoder with a SCART lead or when you want to tune-in a station on another System. Use C / c to move across the screen and select any of the ATV Manual Tuning options.
English SETTING UP YOUR TV g h Each signal will show on the television. If it is not your media recorder, press B / b again to restart the search. When your media recorder signal is found, press c to move along to Station. Use BbC c to put in the required characters, e.g. VCR. ATV Manual Tuning Skip To prevent certain channels from being viewed, positions can be skipped. a Select ATV Manual Tuning from the Channel Tuning menu. b Press B / b to highlight the position to be skipped and press OK.
SETTING UP YOUR TV Channels may be moved and saved to the position of your choice. a Select ATV Manual Tuning from the Channel Tuning menu. b With the list of channels showing, press B / b to highlight the position to be moved and press c. Pos. Channel C - 69 1 C - 31 BBC1 2 C - 43 BBC1 3 C-7 C-9 5 C - 12 6 C - 23 7 C-2 NOTE: This feature varies depending on the Ant/Cable/ Satellite setting.
English SETTING UP YOUR TV Manual Tuning for DVB-C DTV Settings When Ant/Cable/Satellite is set to Cable, DTV Manual Tuning items are as follows: Frequency: Input a specific frequency to be scanned Modulation: Choose from one of five QAM modulation options Symbol Rate: Input a specific baud rate (KS/s) to be used for the manual scan Highlight Start Scan and press OK. Channels (Antenna/Cable) The channel order may be changed to suit your personal preference.
SETTING UP YOUR TV you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, press B / b to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move. Channels Line No.
English SETTING UP YOUR TV Standby Channel Update Data Transfer If the Standby Channel Update is set to On, when the TV is in Standby, Digital Tuning is automatically executed. You can copy channel information from TV to USB memory and edit the channel information by using your PC and updates channel information to your TV. a Select DTV Settings from the Installation menu and press OK. a Select DTV Settings from the Installation menu and press OK.
CONTROLS AND FEATURES Quick menu item example Quick Menu Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, More Information, Sleep Timer etc. Mode Quick menu item Description When viewing a TV programme or pictures from the external input Intel® WiDi / wireless display See page 65. Picture Mode See page 41. Picture Size See page 39. Single Window Press QUICK to open the Quick Menu and use B / b to select the option.
English CONTROLS AND FEATURES The Time Display – analogue only The time display facility allows the current (text service) time to be seen on the television screen. Press D whilst watching a normal television broadcast to see the time display from the broadcaster. It will remain on screen for about 5 seconds. NOTE: This display may not be available in some cases.
CONTROLS AND FEATURES To switch to 3D mode: • Set 3D Auto Start in the 3D menu to 3D. • Press 3D while viewing 2D mode or Native mode. Trigger of Switching Display Mode Press 3D button Input Signal Type Additional Information 3D Format Signal With 3D Auto Detect Information Switching display mode or selecting 3D format FP TB Without 3D Auto Detect Information Description Source Signal Select 3D 3D Select 2D to 3D * 3D SBS There are four modes for watching TV.
English CONTROLS AND FEATURES To switch to 2D mode: To switch to Native mode: • Set 3D Auto Start in the 3D menu to 2D. • Press 3D while viewing 3D mode. • Press 3D while viewing 3D mode. • Press 3D while viewing 2D to 3D mode. Trigger of Switching Display Mode Input Signal Type Additional Info Format 3D Format Signal With 3D Auto Detect Information FP Source Signal Press 3D button 3D * • From the Quick Menu in 2D mode.
CONTROLS AND FEATURES You can adjust the level of 3D. From the Menu: a b In the 3D menu, press B / b to select 2D to 3D Depth and press OK. Setting 3D Start Message When this feature is set to On, a message is displayed onscreen when a 3D signal is received. Press C / c to select 1, 2, 3, 4, or 5 and press OK. The higher the number, the stronger the 3D effect. a In the 3D menu, press B / b to select 3D Safety Settings and press OK. From the Quick Menu: a Press QUICK to open the Quick Menu.
English CONTROLS AND FEATURES Sound controls Setting Enable 3D Timer This feature helps to remind you not to watch 3D video for extended periods of time. Once a set period of time has passed, a dialogue will be shown asking you if you wish to continue viewing or not. Volume controls and sound mute Volume Press 2+ or 2– to adjust the volume. a In the 3D menu, press B / b to select 3D Safety Settings and press OK. b Enter your 4-digit 3D PIN code. c Press B / b to select Enable 3D Timer.
CONTROLS AND FEATURES English Surround TruVolume™ This feature is effective only the selection of Standard in Sound Mode. Consistent volume, despite volume spikes or changes in content sources. When TV Speaker is On, you can set TruVolume to On or Off. a In the Advanced Sound Settings menu, press B / b to select Surround and press c and B / b to select Off, TruSurround or Depth Rendering. TruSurround: High quality surround sound and expanded sound field over two speakers.
English CONTROLS AND FEATURES Audio Level Offset Headphone Level Sometimes there can be large changes in volume when switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an external input. Using the Audio Level Offset feature reduces these volume differences. This setting is used to set the sound output when headphones are connected. a Set the volume level usually used when watching a DTV 5.1ch programme. b Tune to a channel which is DTV 2ch, ATV or an external input.
CONTROLS AND FEATURES English Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. WIDE Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. 4:3 Use this setting to view a true 4:3 broadcast.
English CONTROLS AND FEATURES NATIVE This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This setting will show the picture without overscan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. PC WIDE This setting will show the picture without overscan or side panels. This option is only available when watching a PC signal source via HDMI or PC terminal. Dot by Dot Press the “Dot by Dot” is a non-scaling display.
CONTROLS AND FEATURES English Picture controls Reset Most of the picture controls and functions are available in both digital and analogue modes. PLEASE NOTE: Features not available will be greyed out. Picture Mode This feature resets all picture settings to the factory settings except Picture Mode. a In the Picture menu, press B / b to select Reset and press OK. b A confirmation message will appear. Press C / c to select Yes and press OK.
English CONTROLS AND FEATURES Base Colour Adjustment Auto Brightness Sensor The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. When the Auto Brightness Sensor is activated, it will automatically optimise the backlighting levels to suit ambient light conditions. a In the Advanced Picture Settings menu, press B / b to select Base Colour Adjustment and press OK.
CONTROLS AND FEATURES Scene + When watching a DVD, the compression may cause some words or picture elements to become distorted or pixelated. Using the MPEG NR feature reduces this effect by smoothing out the edges. This feature helps to improve the performance of motion picture. a b a In the Advanced Picture Settings menu, press B / b to select Scene + and press OK. In the Advanced Picture Settings menu, press B / b to select Noise Reduction and press OK. b Press B / b to select On or Off.
English CONTROLS AND FEATURES Colour Decoding Expert Picture Settings If you view DVDs with this TV, the Colour Decoding option may be set to ensure the colourimetry reproduction. This feature is available when the Picture Mode option is Standard, Hollywood Day, Hollywood Night, and Hollywood Pro. NOTE: The modes excluding Auto (BT.709 and BT.601) are to convert an irregular signal output from the DVD etc. with incorrect colour to the optimum state. If BT.709 or BT.
CONTROLS AND FEATURES a Press b to select 2P White Balance and press OK. b Press B / b to select Red-Offset, Green-Offset, Blue-Offset, Red-Gain, Green-Gain, or BlueGain. A white square will appear on the screen. Automatic Format (Widescreen) When this television receives a true Widescreen picture and Auto Format is On, it will automatically be displayed in Widescreen format irrespective of the television’s previous setting. a Press b Press c and B / b to select Display Settings and press OK.
English CONTROLS AND FEATURES Picture Position The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs. NOTE: The Picture Position feature cannot be selected on DTV or PC Inputs. a In the Display Settings menu, press B / b to select Picture Position and press OK. b Press B / b to select an option and press C / c to adjust the settings and press OK. The options differ depending on the currently selected widescreen format and the input signal.
CONTROLS AND FEATURES English • It is recommended to use IEEE 802.11n on 5 GHz for HD video streaming. • It is recommended that the encoding rate for streaming video content is 20 Mbps or less. • It is not recommended to use 2.4 GHz for audio and video streaming. • Content playback may be interrupted by various surrounding interference.
English CONTROLS AND FEATURES Setting up the Network Easy Setup using PBC (Push Button Configuration) You can select the Network Type. a Press b Press c and B / b to select Network Setup and press OK. a In the Network menu, press B / b to select Network Setup and press OK. b Press B / b to select Wireless Setup and press OK. c Press B / b to select Easy Setup and press OK. and B / b to highlight Network icon.
CONTROLS AND FEATURES Manual Setup Press BACK while searching for the AP. A message will appear, and then press C / c to select Yes and press OK. a In the Network menu, press B / b to select Network Setup and press OK. b Press B / b to select Wireless Setup and press OK. Assisted Setup a In the Network menu, press B / b to select Network Setup and press OK. c Press B / b to select Manual Setup and press OK. b Press B / b to select Wireless Setup and press OK.
English CONTROLS AND FEATURES j Highlight Done and press OK. Item Description Status Connected is displayed when the TV is connected with the AP. Disconnected is displayed when the TV is not connected with the AP. Signal Connection signal strength with AP (STRONG/MEDIUM/WEAK) The settings configured in Wireless Setup can be confirmed.
CONTROLS AND FEATURES d NOTE: • When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (This should usually be set to On.) • When the DHCP function of the router is Off, set Auto Setup to Off, and set the IP Address manually. Highlight Auto Setup and press c and B / b to select Off. IP Address Setup Auto Setup IP Address Subnet Mask Default Gateway Off xxx . xxx . xxx . xxx xxx . xxx . xxx . xxx xxx . xxx . xxx .
English CONTROLS AND FEATURES MAC Address DNS Setup You can view the fixed MAC address for the TV (Wired and Wireless). NOTE: When the DHCP function of the router connected to this TV is Off, set Auto Setup to Off, and manually set the DNS address(es). Your internet service provider should have provided these to you. Auto setup a In the Network menu, press B / b to select Network Setup and press OK. b Press B / b to select Advanced Network Setup and press OK.
CONTROLS AND FEATURES Network Device Setup You can enter text by using the Software Keyboard. The Software Keyboard window will appear when you press OK on a field that accepts character input. To enter text using the software keyboard: a Highlight the desired character on the on-screen software keyboard. b Press OK. c Repeat steps 1 and 2 until you have entered all desired text. d Press the GREEN button to save your settings and return to the previous screen.
English CONTROLS AND FEATURES Device Registration Setup Companion Device Control Once a User Name has completed authentication, it is stored in the TV along with the password. The upper limit for the number of Use Names that can be remembered is 20. You can delete User Names that are stored in the TV. When the TV is connected to the home network via Wireless LAN, with the Companion Device Control in Enabled, your TV can be turned on by control from Apps.
CONTROLS AND FEATURES The TV’s device name can be changed. a In the Network menu, press B / b to select Network Device Setup and press OK. b Press B / b to select Device Name Setup and press OK. The Device Name Setup screen will appear. c Press B / b to select Device Name and press OK. The Software Keyboard window will appear. d Input the Device Name by using the software keyboard (see page 53). To save your setting, press the GREEN button. NOTE: • The Device Name can be up to 15 characters long.
English CONTROLS AND FEATURES • When the USB HDD is formatted, all the data stored on the HDD will be erased. • Locked channel cannot record (One Touch Recording, TimeShift), even if you watch the programme. • Do not connect 2 or more USB HDD for recording at the same time.
CONTROLS AND FEATURES • For auto recordings, when the auto recording region is full, auto recordings are automatically deleted from the oldest programme. - Automatic deletion of auto recordings cannot be disabled. • Auto recording schedule items and auto recordings can be changed to manual recording schedule items or manual recordings by the following operations. - For auto recording schedule items, change to manual recording schedule with the Edit Timer.
English CONTROLS AND FEATURES To search for and record a programme using Genre Search: a Press the YELLOW button on the remote control to access the Genre Search screen. Genre Search To programme the timer: a Press the BLUE button on the remote control. b Select the unprogrammed column (blank column) and press OK. The Edit Timer screen will appear. Press B / b to select Timer Type.
CONTROLS AND FEATURES a To check, edit or delete scheduling information Press , the information screen will appear giving details of the channel and programme currently being viewed. 4 CHANNEL Z You can check, edit or delete scheduling information. a 6:00 Thu, 11 Oct My TV Timer List English 3D 2D • Depending on the transmitter information, programme broadcast time or other information may not be correctly displayed in the recording list.
English CONTROLS AND FEATURES To view a recorded programme To view the recorded My TV Library screen and select a title from the recorded programme list. a Press and highlight My TV Library icon or select My TV Library from Quick Menu and press OK. The My TV Library screen will appear.
CONTROLS AND FEATURES Recording Setup Input your desired title by using the software keyboard (see page 53). Press the GREEN button to save your settings. To delete a recorded programme: a Press the RED button. Check boxes will appear next to the titles. b Press B / b to select the title you want to delete and press OK. A check mark will be inserted in the check box. You can set your preferences for recording.
English CONTROLS AND FEATURES To select the TimeShift Size: To perform a USB HDD operation test: a In the Recording Setup screen, press B / b to select TimeShift Size. a b Press c and B / b to select 512 MB, 1 GB, 2 GB or 4 GB and press OK. To use TimeShift recording: In the Recording Setup screen, press B / b to select Device Test and press OK. USB HDD operation test will start. Wait until the test ends. NOTE: The results of the device test are only a guide.
CONTROLS AND FEATURES Toshiba’s universal portal for internet content and services (services are dependent on country), offering you a multitude of smart features. For detailed information on how to access and use those features, please refer to our website http://www.toshiba.eu/smarttv NOTE: • You need to configure a home network before using this feature (see page 13). • This service may not be available or the contents may change depending on the service side. a b Press .
English CONTROLS AND FEATURES To browse favourite websites a Press on the remote control and select Internet icon to open the web browser. b Use BbC c to select Favourites STAR and press OK. c Select the item or folders to move to the desired URL address and press OK. d You can now browse websites on your TV using BbC c on the remote control.
CONTROLS AND FEATURES Intel® WiDi / wireless display is supported on this TV. You can use your TV as second display for PC with Intel® WiDi or other device. Intel® WiDi / wireless display Device Name The TV’s Intel® WiDi / wireless display device name can be changed. a In the Network menu, press B / b to select Network Device Setup and press OK. b Press B / b to select Intel® WiDi / wireless display Setup and press OK. A prompt will appear on the screen. Select Yes.
English CONTROLS AND FEATURES Device List Device List displays a list of MAC addresses for previously connected device that have been connected before. The maximum number that can be stored is 20. If the list runs out of space, the least-recently-used MAC address will be deleted and the new MAC address added automatically. a In the Intel® WiDi / wireless display Setup screen, highlight the Device List and press OK. Device List will appear.
CONTROLS AND FEATURES English Manual Start Basic operation Using My Contents with USB When Auto Start is enabled, you will be asked if you want to start the My Contents whenever a USB device is inserted. If Auto Start is disabled (or if you want to connect to a media server on the network), you must manually start the My Contents from the menu. a Insert a USB device into the USB port. b Press and select My Photos, My Videos, or My Music icon and press OK.
English CONTROLS AND FEATURES To select a file in the list of contents: a Press BbC c to select a file or folder. b Press OK to move to the next layer, or press BACK to return to the previous layer. When you select a file, press OK to play or view. Viewing photo files (on a media server or USB device) There are two types of viewing modes. Photos List (USB and Network Player Photo) This view allows you to search for photos in a grid format.
CONTROLS AND FEATURES Selecting the Playback Mode: In this mode, only files located in the selected directory will be displayed. This view allows you to change the photo content manually. When moving from Photos List to Single View, the currently selected photo will be displayed. You can view 3D photos in 3D and you can also view 2D photos in 3D. a Press c to view the next photo. Press C to view the previous photo. b Press to display file status information (file number, photo title, resolution etc.
English CONTROLS AND FEATURES To select a photo from Play List (USB and Network Player Photo): Viewing movie files (on a media server or USB device) While in the Single View mode or Slide Show mode, you can select a different photo from the Play List. a Press QUICK to open the Quick Menu from Single View mode or Slide Show mode. b Press B / b to select Play List and press OK. The Photos List will appear. c You can select movies from a Videos List of available files.
CONTROLS AND FEATURES Resume Play • Press W to pause. PAUSE may not be available depending on the contents or media server. • To resume normal playback, press c (play). • To play in fast reverse or fast forward directions, press CC / cc during playback. Each time you press the CC / cc, the playback speed will change. • Press Z to playback from the beginning of currently selected file. Press z to locate subsequent files.
English CONTROLS AND FEATURES To register your TV to a DivX® account: To playback DivX Plus HD content: This TV allows you to play back files purchased or rented from DivX® Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code. • To play in fast reverse or fast forward directions, press CC / cc during playback. Each time you press the CC / cc, the playback speed will change.
CONTROLS AND FEATURES You can listen to music from a Music List of available files. Music List (USB and Network Player Music) Videos Music Devices: /usb/sda1 Photos To set the repeat mode: a Press QUICK to open the Quick Menu. b Press B / b to select Repeat. c Press c and B / b to select Off, All or 1. Search Mode Sort: File Name Total time/Date xxxxxxxxxxx Files in the same folder are played back once. All Files in the same folder are repeatedly played back.
English CONTROLS AND FEATURES Other features Netflix® To confirm the Netflix ESN (Electronic Serial Number) Panel Lock Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. a Press b Press c and B / b to select Panel Lock and press OK. c Press B / b to select On. and B / b to highlight Options icon. a In the Network menu, press B / b to select Smart Apps Setup and press OK. b In Smart Apps Setup menu, select Netflix Setup and press OK.
CONTROLS AND FEATURES e My TV Timer List – digital only Power On Time (only for DTV Clock On mode): Set the time you prefer with the number buttons. Repeat (only for DTV Clock On mode): Select the desired On Timer operation (Once, Every Day, Mon-Fri, Mon-Sat, Sat-Sun). Input: Select a video input source (ATV, DTV Ant, EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC). Channel: Set the channel that will be tuned when the television turns on.
English CONTROLS AND FEATURES Energy Saving Settings Digital on-screen information When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. Automatic Power Down The TV will automatically turn itself off (Standby) after your selection Time, if you do not operate the TV either from the remote control or the TV control panel. a Press b Press c and B / b to select Power Management and press OK.
CONTROLS AND FEATURES a Press QUICK to open the Quick Menu. b Press b to highlight More Information and press OK.
English CONTROLS AND FEATURES Genre selection/searching From the Guide screen, you can use the genre selection and search features. a In the Guide screen, press QUICK. b Press B / b to highlight Genre Colour in the Quick Menu and press OK. Digital settings – parental control In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. These can then only be accessed with a security code PIN.
CONTROLS AND FEATURES The Parental Control feature allows you to block programmes according to their rating levels. If a PIN has been set, you will need to enter it before adjusting the level. a In the DTV Settings menu, press B / b to select Parental Control and press OK. b Press B / b to select Parental Setup and press OK. Parental Setup: Select when you want to set viewing restrictions on broadcast programmes. c Press B / b to select an option.
English CONTROLS AND FEATURES Digital settings – other settings Skip channels This feature allows you to set channels that will be skipped when Pu or PU are used to tune. Subtitles a Select the channel you want to skip in your channel list. b In DTV mode, this feature will show subtitles on the screen in the selected language provided they are being broadcast. In the Quick Menu, press b to select Channel Options and press OK.
CONTROLS AND FEATURES The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. a Insert the CAM and card into the Common Interface Slot, following the instructions provided with the CAM. A box will appear on screen to confirm that the CAM has been inserted. b Press icon.
English CONTROLS AND FEATURES Software Licences The licences for the software used in this television are available for viewing. a In the Get Help menu, press B / b to select Software Licences and press OK. A screen will appear displaying all the licensing information required for the televisions software. System Information and Reset TV System Information This feature can be used to check the version of software currently installed.
CONTROLS AND FEATURES Sampling Clock Horizontal and Vertical Position Connect the PC (as shown in the ‘Connecting a computer’ section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference. a Press b Press c and B / b to select Display Settings and press OK. c and B / b to highlight Picture icon. a In the Display Settings menu, press B / b to select PC Settings and press OK. b Press B / b to select Sampling Clock.
English CONTROLS AND FEATURES Input selection and AV connections See page 9 for a detailed image showing recommended connections. Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket. Labelling video input sources These input labels are shown in the input selector. You can label video inputs according to the devices you have connected to the TV. a Press b Press B / b to select AV Connection and press OK.
CONTROLS AND FEATURES When connecting a surround sound amplifier to the digital audio output (Sony/Philips Digital Interface Format [S/ PDIF]), the following options can be selected or adjusted. a In the Sound menu, press B / b to select Digital Audio Output and press OK.
English CONTROLS AND FEATURES Using HDMI CEC Control Auto Standby When Auto Standby is enabled, the television, when switched off, will automatically switch off (Standby) all connected HDMI CEC Control equipment. This is a new feature that uses CEC technology and allows you to control Toshiba HDMI CEC Control compatible devices from the television remote control via HDMI connection (page 11).
CONTROLS AND FEATURES If an HDMI CEC Control device with HDMI switching capability (e.g. AV amplifier) is connected to the HDMI input, you can select another HDMI CEC Control device that is connected to the master HDMI device on the input source list. a Press o and a list will appear on screen showing available input sources. b Press b to select the input source that the HDMI CEC Control devices are connected.
English CONTROLS AND FEATURES Using MHL TV function You can use the following functions by connecting between the TV HDMI 3 port and a USB port of mobile phones etc. with an MHL cable. • Charge with mobile phone from TV • Two-way remote operation between TV and mobile phone • Video/Audio output from mobile phone NOTE: These functions may not be available depending on the connected device. Connecting an MHL-compatible device Connect the device to the HDMI 3 port on the TV with an MHL cable (not supplied).
TEXT SERVICES Navigating pages using Auto If Fastext is available, four coloured titles will appear at the base of the screen. This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. List will save your four favourite pages. To access one of the four given subjects, press the relevant coloured button on the remote control.
English TEXT SERVICES Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. Channels cannot be changed until this has been done.
PROBLEM SOLVING English Questions and Answers Below are the answers to some of the most common queries. Question Sound Why is there no sound or picture? Answer Check the television is not in Standby mode. Check the mains plug and all mains connections. Why is there a picture but no sound? Check all lead connections. No sound or unacceptable format sound may be received. Check the volume has not been turned down or that sound mute has not been selected. Check shared audio settings.
English PROBLEM SOLVING Question Answer Picture Why are there horizontal stripes and/ The Clock Phase may need adjustment. Select PC Settings from the or blurred images on the screen when Display Settings menu, highlight Clock Phase and adjust until the in PC mode? picture clears. Why are the colours wrong when an NTSC source is played? Connect the source via a SCART lead and play. Select Colour System from the Options menu. a Set the Colour to Auto and exit.
PROBLEM SOLVING English Question Answer Why don’t the networked devices work? The LAN cables are not connected properly or at all. Connect all cables (see page 13). Make sure your network address is set up correctly (see page 51). Why doesn’t the wireless network work? Check that the AP is powered on. Why doesn’t the My Contents feature Make sure that devices are connected correctly. operate? Incorrect behaviour may occur with a USB Hub connection.
English INFORMATION Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
INFORMATION The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur: incorrect display, false format detection, picture position failure, blur, or judder.
English INFORMATION My Contents Supported Format My Contents Photo Media Format JPEG File Extension .jpg .jpeg Video codec Audio codec JPEG USB Network yes yes yes no yes no – MPO .mpo MPO – BMP .bmp BMP – Note USB Data compatibility: JPEG Exif ver 2.2 Maximum viewable resolution: •JPEG 15360 × 8640 (Baseline) 1024 × 768 (Progressive) •BMP 9600 × 6400 Maximum number of files: 1000 / folder Network Data compatibility: JPEG Exif ver 2.
INFORMATION Movie Music Media Format File Extension Video codec Audio codec USB Network MOV .mov H.264 (MPEG-4 AVC) MPEG-4 part2 MPEG-1/2 Layer3 MPEG-2/4 LC-AAC MPEG-4 HE-AAC yes no MP4 .mp4 .m4v H.264 (MPEG-4 AVC) MPEG-4 part12,14 MPEG-1/2 Layer3 MPEG-4 HE-AAC DTS yes no H.264 (MPEG-4 AVC) MPEG-2/4 LC-AAC yes yes ASF .asf .wmv VC-1 (WMV9) WMA9 Std yes yes WMA7/8 WMA9 Pro yes no DivX .divx .div DivX 3,4,5,6 yes no Xvid .
English INFORMATION 3D Support Format (HDMI) Resolution Aspect ratio V.Frequency 1280 × 720p 16:9 59.940/60.000 Hz H.Frequency Pixel Clock Frequency 3D Structure 90.0/89.91 kHz 148.352/148.500 MHz Frame Packing 44.955/45.000 kHz 74.176/74.250 MHz Side by Side (Half) 75.000 kHz 148.500 MHz Frame Packing 37.500 kHz 74.250 MHz Side by Side (Half) 33.716/33.750 kHz 74.176/74.250 MHz Side by Side (Half) Side by Side (Half) Top and Bottom 50.000 Hz Top and Bottom 1920 × 1080i 16:9 59.
INFORMATION English Licence information • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • The terms HDMI and HDMI HighDefinition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • This product contains Adobe® Flash® Player software under license from Adobe Systems Incorporated. Copyright© 1995-2009 Adobe Systems Incorporated.
English INFORMATION EU Conformity Statement (EU Only) This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA, 23 Davy Road, Plymouth, PL6 8BY, UK This product is labeled with the CE Mark in accordance with the related European Directives, notably Low Voltage Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC and RoHS Directive 2011/65/EU.
INFORMATION Important information for 3D viewing CAUTION • The 3D function has been designed for private use and entertainment in your home environment. Please note that any commercial use of the 3D function could lead to copyright infringement of authors’ rights. Toshiba asks you to respect the intellectual property rights of third parties. About handling the 3D glasses • Do not leave the 3D glasses or the accessories within the reach of small children.
English INFORMATION • For optimal 3D effect and to avoid eye fatigue it is important that you properly select your viewing position. The best viewing position is at the indicated viewing distance with your eyes at the same level as the center of the display as shown below. The center of the optimum viewing area varies from set to set. The usable viewing area is generally over the range shown in the table below (actual angle not depicted in drawing).
INFORMATION English Specifications and accessories Receiving systems DVB-T Broadcast systems/ Broadcast systems/channels channels UK UHF 21-68 PAL-I UHF UK21-UK69 France VHF 05-10 PAL-B/G UHF E21-E69 (VHF 01-05) VHF E2-E12, UHF 21-69 S1-S41 Germany VHF 05-12 SECAM-L UHF F21-F69 UHF 21-69 VHF F1-F10, B-Q Austria VHF 05-12 SECAM-D/K UHF R21-R69 UHF 21-69 VHF R1-R12 Switzerland VHF 05-12 UHF 21-69 Italy VHF 05-12 (D,E,F,G,H,H1,H2) UHF 21-69 Spain UHF 21-69 Netherlands VHF 05-12 UHF 21-69 Greece VHF 05-12 UHF
© TOSHIBA All rights reserved. Reproduction in whole or part without written permission is strictly prohibited.
