Owner’s Manual L243*D / W243*D L245*D / W245*D DIGITAL Series This standard owner’s manual is designed to show you how to connect and tune in your Toshiba TV and to operate the most commonly used functions. During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance: If your TV is connected to the internet, firmware will be automatically made available.
English Contents Channel Grouping ....................................... 23 Common Interface ...................................... 23 Safety Precautions ............................... 4 Installation and Important Information ............................................ 5 Digital On-Screen Information and Programme Guide ................................ 24 Where to install ........................................... 5 When using a Wall Bracket .........................
Preference Controls ............................. 47 View Photo Files ......................................... 33 Using Slide Show ........................................ 34 Repeat Settings for Slideshow .................... 34 Set Interval Time ......................................... 34 Using the Play List ...................................... 34 Background Music ...................................... 34 Photo Info.................................................... 35 On Timer .....................
English Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased. DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.
Where to install Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV set on a stable, level surface that can support the weight of the TV. The LCD display panels are manufactured using an extremely high level of precision technology, however sometimes some parts of the screen may be missing picture elements or have luminous spots.
English :KHQ XVLQJ 0+/ 0RELOH +LJK GH¿QLWLRQ /LQN Interoperability with MHL devices of other manufacturers is not guaranteed. Toshiba does not provide any guarantee, therefore, against operational failure such as that described below when an MHL source is connected to the TV. - No picture or sound - Some of the functions do not work be remote operation from the TV If the MHL does not work properly, also contact the manufacturer of the source device for advice on its use.
12 Simple at-a-glance reference of your remote control.
English Connecting External Equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. ILLUSTRATION SHOWS 32L24. USB SOCKET *a decoder could be Digital Satellite or any other compatible decoder. *Model will determine power cord position.
If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the television. SCART cables: - - - -- - - - - - - - - - - - - - Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media player SAT socket to the decoder MEDIA REC. socket. Before running Auto Tuning put your decoder and media recorder to Standby.
English HDMI CEC Connections The basic functions of connected audio/video equipment can be controlled using the television’s remote control if an HDMI CEC compatible device is connected. ILLUSTRATION SHOWS 32L24.
The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a settop box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 14.
English To connect a DVI device Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1. The maximum recommended HDMI – DVI cable length is 6.6ft (2m). An HDMI-to-DVI adapter cable transfers video only. Separate analogue audio connection is not supported for audio receivers. ILLUSTRATION SHOWS 32L24.
With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television. To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI cable. If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate analogue cable is not necessary. ILLUSTRATION SHOWS 32L24.
English Acceptable Video signals through HDMI terminals Resolution + )UHTXHQF\ .+] 9 )UHTXHQF\ +] 480i 15.750 60.000 480p 31.500 60.000 576i 15.625 50.000 576p 31.250 50.000 720p 37.500 50.000 720p 45.000 60.000 1080i 28.125 50.000 1080i 33.750 60.000 1080p 27.000 24.000 1080p 28.125 25.000 1080p 33.750 30.000 1080p 56.250 50.000 1080p 67.500 60.000 Acceptable PC signals through HDMI terminals Resolution + .
While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used control some functions. ILLUSTRATION SHOWS 32L24. Common Interface USB HDMI 2 INPUT SOCKET Power Up / down (Volume or channel) Programme / Volume / Source Remote sensor Headphone RED LED - Standby GREEN LED - Power on Switching On Using the Remote Control If the RED Standby LED is unlit, check that the plug is connected to the power supply.
English Tuning the Television Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 7. First Time Using 7 3UHVV Ż RU Ź WR VHOHFW Home or Store. For normal home use, select Home. )RU ¿UVW WLPH XVH SOXJ LQ WKH WHOHYLVLRQ 1 and press the button. Location To use the TV for the display in a store showroom, The Language menu will appear. please select [Store].
English Setting the Channels NOTE: When Parental Block is activated, the 4-digit password is needed. 3UHVV Ÿ RU ź WR VHOHFW Start Scan and press to start Auto Tuning. Auto Tuning The Auto tuning function will completely retune the television and can be used to update the channel list. NOTE: It is recommended that Auto tuning is run periodically to ensure that all new services are added. NOTE: All the current channels and settings, for example, the locked channels, will be lost.
English 3UHVV Ÿ RU ź WR VHOHFW Tuning Mode DQG SUHVV Ż RU Ź WR VHOHFW ATV, DTV or ATV and DTV. Manual Tuning There are two TV modes: ATV and DTV that can be tuned-in manually using Manual Tuning. Auto tuning ATV mode - Antenna/Cable Previous settings will be lost ! Press EXIT for no change.
DTV mode - Antenna 1 ATV Manual Tuning Position 1 DK A C 69 0 − − − − − Press MENU 3UHVV Ż RU Ź WR VHOHFW SETUP and press to enter the submenu. 3UHVV Ÿ RU ź WR VHOHFW DTV Manual Tuning and press to enter the submenu. SETUP Select A A B C D E F G H I B Change C OK D E F G Save H RETURN I Position: The number to be pressed on the remote control. System: 6SHFL¿F WR FHUWDLQ DUHDV Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e.
English DTV mode - Cable 1 Automatic Power Down Press MENU 3UHVV Ż RU Ź WR VHOHFW SETUP and press to enter the submenu. 3UHVV Ÿ RU ź WR VHOHFW DTV Manual Tuning and press to enter the submenu. SETUP 1/2 Language Country Tuner Mode Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup OK The TV will automatically turn itself off (standby) within 4 hours, if you do not touch the control buttons on the remote control or on the TV control panel.
English DTV Settings Favorite Channels The channel order may be changed to suit your personal preference. NOTE: This function is only available in DTV mode. 1 Press the button on the remote. A icon appears. Channels Position 803 804 805 806 807 273 Press MENU 3UHVV Ż RU Ź WR VHOHFW SETUP and press to enter the submenu. Re−number PICTURE SOUND SETUP APPLICATIONS Favorite Skip Lock OK Sort Press to show the Channel List and SUHVV Ż RU Ź WR Favorite.
English Password Sort 3UHVV Ÿ RU ź WR VHOHFW WKH GHVLUHG channel and then press . A tick icon appears. Channels Position 803 804 805 806 807 273 Change the 4-digit parental control password. The factory default password is “1276”. 1 In the DTV Settings PHQX SUHVV Ÿ RU ź WR VHOHFW Password, and press to enter the submenu.
1 Common Interface The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. 1 Insert the CAM and card into the Common Interface Slot, following the instructions provided with the CAM. A box ZLOO DSSHDU RQ WKH VFUHHQ WR FRQ¿UP WKDW the CAM has been inserted.
English Digital On-Screen Information and Programme Guide When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. Information 1 Press , and the information screen will appear giving details of the channel and programme currently being viewed.
English General Controls The General Functions allow you to select channels and information, adjust sound features, personalise the picture style and select any connected external equipment. Selecting Channels Subtitles To select a channel use the numbered buttons on the remote control. Channels can also be selected using P and P . If Subtitles are available for your current programme, pressing the SUBTITLE button will toggle Subtitles on or off.
English Sound Controls Volume Controls and Mute Sound Volume Press or Stable Sound The Stable Sound feature limits high volume levels in order to prevent the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial. 1 Press MENU 3UHVV Ż RU Ź WR VHOHFW SOUND and press to enter the submenu. 3UHVV Ÿ RU ź WR VHOHFW Stable Sound, DQG SUHVV Ż RU Ź WR VHOHFW On or Off. to adjust the volume.
Digital Audio Output 1 Press MENU 3UHVV Ż RU Ź WR VHOHFW SOUND and press to enter the submenu. 3UHVV Ÿ RU ź WR VHOHFW Digital Audio Output and press to enter the submenu. 3UHVV Ÿ RU ź WR VHOHFW Audio Format, DQG SUHVV Ż RU Ź WR VHOHFW PCM or Auto. Digital Audio Output Audio Level Offset Sometimes there can be large changes in volume when switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an external input. Using the Audio Level Offset feature reduces these volume differences.
English Widescreen Viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Wide (Expect PC) Wide (PC only) 4:3 Super Live Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen.
English This setting will show the picture without over scan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. Normal “Dot by Dot” is a non-scaling display. Depending on the input signal format, the setting will display the picture with side panels and/or bars at the top and bottom (i.e. VGA input source).
English Picture Controls Most of the picture controls and functions are available in both digital and analogue modes. NOTE: Features not available will be greyed out. Picture Position Picture Mode The Picture Position may now be adjusted to suit personal preference. 1 Press MENU 3UHVV Ż RU Ź WR VHOHFW SETUP and press to enter the submenu. PICTURE SOUND SETUP APPLICATIONS You can adjust the picture appearance by selecting the preset value in picture mode based on the programme category.
Static Gamma The static gamma feature allows you to adjust the levels of black in the picture. 1 In the Picture Settings PHQX SUHVV Ÿ RU ź WR VHOHFW Static Gamma. 3UHVV Ż RU Ź WR VHOHFW WKH QXPEHU RI Static Gamma (-5~+5). 1 In the Picture Settings PHQX SUHVV Ÿ RU ź WR VHOHFW Black/White Level. 3UHVV Ż RU Ź WR DGMXVW WKH OHYHO IURP Off, Low, Middle or High. The effect depends on the broadcast and is most noticeable on dark colours.
English 3D Colour Management Digital Noise Reduction When 3D Colour Management is set to On, it allows the Base Colour Adjustment feature to become available. You can adjust the picture colour quality by selecting from 6 base colour adjustments : Red, Green, Blue, Yellow, Magenta or Cyan. 1 In the PICTURE PHQX SUHVV Ÿ RU ź WR select 3D Colour Management. '15 'LJLWDO 1RLVH 5HGXFWLRQ enables you to “soften” the screen representation of a weak signal to reduce the noise effect.
English Enjoy Photos through USB Port 7KH 3KRWR 9LHZHU DOORZV \RX WR SOD\EDFN LPDJH ¿OHV IURP D 86% VWRUDJH GHYLFH Image Photo Resolution Base-line 15360x8704 (1920x8 x 1088x8) Progressive 1024x768 non-interface 9600x6400 interface 1200x800 JPEG PNG BMP 9600x6400 3UHVV Ÿ ź Ż RU Ź WR VHOHFW WKH IROGHU you wish to view and press to enter. Press P or P to page up or down. View Photo Files 1 Insert a USB storage device and press on the remote. 8VH Ÿ RU ź WR VHOHFW MEDIA and press .
English Press MENU to change the settings when viewing a photo. Set Interval Time 1 Press MENU to change the settings when viewing a photo. 3UHVV Ż RU Ź WR VHOHFW and press to select the desired interval time (3/5/10/15/30/60/90 Sec). Off Using the Play List On 15 sec 788 X 1157 00001 / 00004 0000-1.
and press Photo Info . Info GLVSOD\V WKH ¿OH VWDWXV LQIRUPDWLRQ FRQWHQW number, photo title, shooting date and time, resolution etc.). 1 Press MENU to change the settings when viewing a photo. 3UHVV Ż RU Ź WR VHOHFW and press . Background Music 16 Play List Move OK Select RETURN Back 3UHVV Ÿ RU ź WR VHOHFW PXVLF DQG SUHVV to play music. Press RETURN on the remote to collapse the list. USB:\ 0000-1.
English Enjoy Music through USB Port 7KH 03 3OD\HU DOORZV \RX WR SOD\EDFN PXVLF ¿OHV IURP D 86% VWRUDJH GHYLFH Audio Codec File Extension Bit Rate MPEG1 Layer2/3 MP3 Bit Rate: 8Kbps ~ 320Kbps Sampling rate: 16KHz ~ 48KHz AAC, HEAAC M4A/AAC Bit Rate: Free Format Sampling rate: 8KHz ~ 48KHz LPCM WAV Bit Rate : 64Kbps ~ 1.5Mbps Sampling rate : 8KHz ~ 48KHz 3UHVV Ÿ RU ź WR VHOHFW WKH IROGHU \RX wish to play and press to enter. Press P or P to page up or down.
English 3UHVV Ÿ RU ź WR VHOHFW WKH GHVLUHG PXVLF and press to play. Repeat Settings 1 3UHVV Ż RU Ź WR VHOHFW . Play Press to select Off, One or Folder. Using the Play List 1 Folder 00:00:02 / 00:02:42 16 00001 / 00003 001.
English Enjoy Videos through USB Port 7KH 9LGHR 9LHZHU DOORZV \RX WR SOD\EDFN YLGHR ¿OHV IURP D 86% VWRUDJH GHYLFH NOTE: USB 2.0 or above is recommended for best media performance. File Container Video Codec Extension dat, mpg, mpeg ts, trp, tp vob mp4, m4v mkv MPEG MPEG1 MPEG2 MPEG2-TS H.264 H.264-TS SPEC 1080P@ 30fps H.264: 1080P@50fps MPEG2 Others: 1080P@30fps MPEG2-PS MPEG2 1080P@ 30fps MP4 MKV H.264 H.264: 1080P@50fps MPEG4 Others: 1080P@30fps H.264 H.
1 English Press MENU to change the settings when viewing a video. Play Video Files Insert a USB storage device and press on the remote. 8VH Ÿ RU ź WR VHOHFW MEDIA and press . Play Inputs TV Standard Sta 1 2 3C HDMI1 HDMI2 MEDIA PC Native ti Folder 00:00:08 / 00:02:28 Move OK Select RETURN Back 3UHVV Ż RU Ź WR USB 2.
English Repeat Settings 1 Video Info Info GLVSOD\ ¿OH VWDWXV LQIRUPDWLRQ FRQWHQW number, video title, audio track, subtitle, program, size, etc.). 1 Press MENU to change the settings when viewing a video. Press MENU to change the settings when viewing a video. 3UHVV Ż RU Ź WR VHOHFW and press to select Off, One or Folder. 3UHVV Ż RU Ź WR VHOHFW Set 1 Press MENU to change the settings when viewing a video. and press . Play 001.
English HDMI CEC Control This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba HDMI CEC compatible equipment from the television’s remote control. NOTE: Not all Toshiba products currently support HDMI CEC. Equipment Control Select HDMI CEC Device The HDMI CEC mode on the television’s remote control allows the control of connected HDMI CEC equipment being watched.
English HDMI CEC Menus By activating the Enable HDMI-LINK feature in the HDMI CEC Control menu, individual HDMI-LINK features can then be activated. One Touch Play Enable HDMI-LINK The function of HDMI CEC will automatically power on the television that was in standby mode and switch the television’s input source to the port connected with the audio/video equipment by powering-on or playing from the audio/video equipment. NOTE: This feature is dependent on the connected equipment and television setting.
English Auto Power On The Auto Power On setting allows the television to be automatically switched On if user pressed Play key on the HDMI CEC device. 1 In the HDMI CEC Control menu, press Ÿ RU ź WR VHOHFW Auto Power On. 2 3UHVV Ż RU Ź WR VHOHFW On or Off. Auto Standby When the Auto Standby is enabled, switching off the television will automatically switch off all connected HDMI CEC equipment. 1 In the HDMI CEC Control menu, press Ÿ RU ź WR VHOHFW Auto Standby. 3UHVV Ż RU Ź WR VHOHFW On or Off.
English HDMI CEC Playback Device Control This is a new feature that uses CEC technology and allows you to control HDMI CEC compatible devices from the TV remote control via HDMI connection. When there are two or more HDMI CEC devices connected to the television, the device selection to select. menu appears.
English Using MHL TV Function You can use the following functions by connecting between the TV HDMI 2 port and micro USB port of mobile phones etc. with a MHL cable.
English Operating an MHL-compatible Device MHL is a new mobile audio video interface standard for direct connection with MHL enabled mobile devices to MHL enabled TVs, providing instant access to a wealth of mobile content with ease of control through the TV remote controller. Remote Control Pass-Through Control Panel 1 2 1 3 No Item EXIT Exit. Ÿ Up. ź Down. Ż Left. Ź Right. Select. RETURN Exit. Entry MHL Control (Pass-Through Control Panel) 1 GUIDE Record.
On Timer 5 This feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. 1 Press MENU 3UHVV Ż RU Ź WR VHOHFW APPLICATIONS and press to enter the submenu. PICTURE 2 SOUND SETUP APPLICATIONS 6 7 8 PREFERENCES 3UHVV Ÿ RU ź WR VHOHFW On timer and press to enter the submenu.
English EPG 4 EPG (Electronic Programme Guide) supports 9 sets of timers. You can set or cancel a timer for a selected programme within the guide. When the TV is on and the timer activates, a dialogue box is shown informing you that the programme is about to start. When the TV is in standby mode and the timer activates, the TV will wake up with backlight off, speaker mute on, and change to the channel selected. You must set the time correctly before using this function.
Blue Screen When Blue Screen is selected, the screen will turn blue when no signal is received. 1 In the PREFERENCES PHQX SUHVV Ÿ RU ź WR VHOHFW Blue Screen. 2 3UHVV Ż RU Ź WR VHOHFW On or Off. NOTE: This function is not available in DTV mode. PICTURE 2 SOUND SETUP APPLICATIONS PREFERENCES 3UHVV Ÿ RU ź WR VHOHFW Panel Lock and SUHVV Ż RU Ź WR VHOHFW On or Off. Side Panel The Side Panel feature lightens or darkens the band each side of the screen when in 4:3 or 14:9 format.
English DivX Deregistration 1 2 System Information In the PREFERENCES PHQX SUHVV Ÿ RU ź WR VHOHFW DivX Deregistration and press . 3UHVV Ż RU Ź WR VHOHFW OK WR FRQ¿UP RU select Cancel to exit and press . In the SETUP PHQX SUHVV Ÿ RU ź WR VHOHFW System Information and press to display WKH PRGHO LQIRUPDWLRQ DQG ¿UPZDUH YHUVLRQ System Information TOSHIBA 2013 Nov 9 2012, 17:48:06, FW: v0.08 (SR) Your device is already registered.
This television has a multi-page text memory, which takes a few moments to load. Setting the Modes 1 Control Buttons In the PREFERENCES PHQX SUHVV Ÿ RU ź WR VHOHFW Teletext. Below is a guide to the functions of the remote control text buttons. Displays the index/initial page: Press to access the index/initial page. The page displayed is dependant on the broadcaster. Reveals concealed text: To discover the solutions on quiz and joke pages press the button.
English PC Settings Most of the picture controls and functions are available. However features not available will be greyed out. In the PC input mode, the Manual Setting is not displayed. First press XQWLO WKH YLGHR LQSXW PRGH OLVW DSSHDUV RQ WKH VFUHHQ WKHQ SUHVV Ÿ RU ź DQG in order to select the PC input mode. This function may not be available for some signal or if no signal is received.
Use the Input Selection feature if the television does not switch over automatically when using an external device. Input Signal Selection You can select source of AV or S-VIDEO from this function. 1 Press MENU 3UHVV Ż RU Ź WR VHOHFW SETUP and press to enter the submenu. PICTURE 2 3 SOUND SETUP APPLICATIONS PREFERENCES 3UHVV Ÿ RU ź WR VHOHFW AV connection, and press to enter the submenu. 3UHVV Ÿ RU ź WR VHOHFW EXT1 input and SUHVV Ż RU Ź WR VHOHFW AV or S-VIDEO.
English Frequently Asked Questions Q A Q A :K\ LV WKHUH QR VRXQG RU SLFWXUH" Q A Check that the television is on and that all connections are made properly. 7KHUH LV D SLFWXUH EXW ZK\ LV WKHUH OLWWOH RU QR FRORXU" 1 The colour is factory set to Auto to automatically display the best colour system. When using an external source, if there is little or no colour, improvements may sometimes be achieved. 1 2 8VLQJ Ÿ RU ź WR FKRRVH IURP Auto, NTSC 4.43, NTSC 3.58, SECAM or PAL.
:K\ DUH WKH FRORXUV ZURQJ ZKHQ DQ 176& VRXUFH LV SOD\HG" A Connect the NTSC source via a SCART cable and play. Select Manual setting from the SETUP menu and set the Colour System to Auto. English Q Manual setting Colour system: Auto EXT 1 Select Q A Q A Q A Q A A Change OK Save RETURN Back :KDW FDQ EH GRQH LI WKH XVHU GH¿QHG SDVVZRUG KDV EHHQ IRUJRWWHQ" Use the universal password 1276, then change to a new number of your choice.
English 6SHFL¿FDWLRQV DQG $FFHVVRULHV 7KLV WHOHYLVLRQ FRPSOLHV ZLWK WKH VSHFL¿FDWLRQ OLVWHG EHORZ Receiving systems DVB-T Broadcast systems/ channels UK UHF 21-68 Broadcast systems/channels PAL-I UHF UK21-UK69 France PAL-B/G UHF E21-E69 VHF 05-10 (VHF 01-05) Germany UHF 21-69 VHF 05-12 SECAM-L VHF E2-E12, S1-S41 UHF F21-F69 Austria UHF 21-69 VHF 05-12 SECAM-D/K VHF F1-F10, B-Q UHF R21-R69 Power consumption 32W (approx.) 32L 40L Standby power consumption (approx.
t 0DQXIDFWXUHG XQGHU OLFHQVH IURP 'ROE\ /DERUDWRULHV 'ROE\ DQG WKH GRXEOH ' V\PERO DUH WUDGHPDUNV RI 'ROE\ /DERUDWRULHV t +'0, WKH +'0, ORJR DQG +LJK 'H¿QLWLRQ 0XOWLPHGLD ,QWHUIDFH DUH WUDGHPDUNV RU UHJLVWHUHG WUDGHPDUNV RI +'0, /LFHQVLQJ //& LQ WKH 8QLWHG 6WDWHV DQG RWKHU FRXQWULHV t DivX® 'LY; &HUWL¿HG DQG DVVRFLDWHG ORJRV DUH WUDGHPDUNV RI 5RYL &RUSRUDWLRQ RU LWV VXEVLGLDULHV DQG DUH XVHG XQGHU OLFHQVH &RYHUHG E\ RQH RU PRUH RI WKH IROORZLQJ 8 6 SDWHQWV
English Cleaning the screen and cabinet… 7XUQ RII WKH SRZHU FOHDQ WKH VFUHHQ DQG FDELQHW ZLWK D VRIW GU\ FORWK :H UHFRPPHQG WKDW \RX GR QRW XVH DQ\ SURSULHWDU\ SROLVKHV RU VROYHQWV RQ WKH VFUHHQ RU FDELQHW DV WKLV PD\ FDXVH GDPDJH Disposal… 7KH IROORZLQJ LQIRUPDWLRQ LV RQO\ IRU (8 PHPEHU VWDWHV Disposal of products 7KH FURVVHG RXW ZKHHOHG GXVW ELQ V\PERO LQGLFDWHV WKDW SURGXFWV PXVW EH FROOHFWHG DQG GLVSRVHG RI VHSDUDWHO\ IURP KRXVHKROG ZDVWH ,QWHJUDWHG EDWWHULHV DQG DFFXPXODWRUV FDQ EH GLVSRVHG R
© TOSHIBA All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA 23 Davy Road, Plymouth, PL6 8BY, UK Specification is subject to change without notice.
