MANUAL CCD COLOR CAMERA IK-629A der cor Re ady Re
CONTENTS SECTION 1 GENERAL DESCRIPTION (IK-629A) 1. FEATURES & DESCRIPTION .......................................... 2. COMPONENTS ................................................................. 3. PART NAMES & FUNCTIONS ......................................... 4. CONNECTIONS AND OPERATIONS .............................. 5. LENS .................................................................................. 6. AUTOMATIC ELECTRONIC SHUTTER (AES) ............... 7. BACKLIGHT COMPENSATION (BLC) ........
(IK-629A) IMPORTANT SAFEGUARDS 12. Lightning For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the video product due to lightning and power-line surges. 13. Overloading Do not overload power supply and extension cords as this can result in a risk of fire or electric shock. 14.
3. PART NAMES & FUNCTIONS : Recorder Ready DAY/NIGHT LEVEL DAY/NIGHT (ON/OFF) 4 3 116 1 2 ON OFF LINE LOCK BLC AC 24V ~ / DC 12V --power terminal Right Side View Focus Lock Screw Top View V PHASE : Line-Lock Phase adjustment trimmer Rear View V PHASE AC 24V ~ GND IRIS AES VIDEO DC H L LEVEL VIDEO OUT DC 12V--- Video output terminal : connect to a TV monitor, etc.
4. CONNECTIONS AND OPERATIONS Line - Lock control Notes on connecting Power plugs of connected equipment must be disconnected before installations. A 75-ohm coaxial cable (3C-2V or 5C-2V) is required for standard connection. For details of wiring and operation of equipment to be connected, refer to their operation manuals. Lenses, coaxial cables for video signals and the power cord are not supplied with the camera. 1.
5. LENS 6. AUTOMATIC ELECTRONIC SHUTTER (AES) Back-Focus Adjusment Exposure time is controlled automatically within a range of 1/60 sec. to 1/100000 sec. to obtain an adequate signal when the back panel switch is turned to AES. Back-Focus is adjusted at the factory to accommodate most standard lenses. However, at times, slight adjustment to the IK-629A back-focus is necessary. Focus Lock Screw When the back panel switch is turned to VIDEO or DC, the exposure time is fixed 1/60 sec.
8. WHITE BALANCE (AWB) If the DAY / NIGHT LEVEL switch is set to Low (OFF position), the croma cut level is set less than 20 to 30 IRE. In this camera, the white balance is automatically adjusted corresponding to the color temperature variations on the object. ON OFF O N 1 2 3 4 DAY / NIGHT LEVEL DAY / NIGHT (ON/OFF) This camera is applicable to color temperature of 2500 to 10K. If this switch is set to High (ON position), the croma cut level is set less than 40 to 50 IRE.
H L AC 24V ~ GND Are the camera and connected equipment turned on? Is the iris of the lens adjusted properly? Are cables connected correctly? Unnatural color Is the monitor TV adjusted correctly? Is the lighting too weak? Recorder Ready DAY/NIGHT LEVEL DAY/NIGHT (ON/OFF) 4 3 1 2 116 BLC Right Side View 63 No image Front View Check Points Top View Left side View Condition Recorder Ready 12.
SECTION 5 SPECIFICATIONS 1. SPECIFICAIONS Power – ±10% AC 24V ~ ±10% 60Hz / DC 12V ... Power consumption IK-629A, IK-644A: 4.0w (max) with AI lens IK-645A: 4.5w (max) with AI lens Image sensor 1/3 inch CCD image area sensor Image pickup area 4.96mm (0.195inch) horizontal x 6.0mm (0.