Specification Sheet

Specifications

Capacity

: 4TB, 5TB, 6TB, 8TB

Compatibility

: PC and Apple computers with a Serial ATA interface

Interface Speed

: SATA up to 6 Gbit/s

Form Factor

: 3.5 inch

Rotational Speed: 7,200 RPM

Average Latency Time: 4.17 ms

Buffer Size: 128 MB

Bottom Mounting Holes Configuration:

For more details about mounting, see below

3.5 inch HDD - Location of bottom mounting holes

Location of bottom mounting holes

SLocation of bottom mounting holes is different as following figure 1 and 2.

PAGE 1
Specifications Capacity1: 4TB, 5TB, 6TB, 8TB Compatibility3: PC and Apple computers with a Serial ATA interface Interface Speed4: SATA up to 6 Gbit/s Form Factor5: 3.5 inch Rotational Speed: 7,200 RPM Average Latency Time: 4.17 ms Buffer Size: 128 MB Bottom Mounting Holes Configuration: For more details about mounting, see below 3.5 inch HDD - Location of bottom mounting holes Location of bottom mounting holes SLocation of bottom mounting holes is different as following figure 1 and 2.
PAGE 2
Note: SFF-8301 specification from the industry-standard Small Form Factor (SFF) committee defines the dimensions for 3.5 inch Form Factor Disk Drives. SFF-8301 defines three pairs of bottom mounting holes as follows: Source: SFF Committee, SFF-8301 Specification for Form Factor of 3.5" Disk Drives Rev 1.6 March 16, 2010 "The pair of bottom mounting holes located by dimension A7 is required.
PAGE 3
PAGE 4
TB: Type 2 5TB: Type 2 6TB: Type 1 8TB: Type 1 Size: Inch (WxHxL): 4 x 1.03 x 5.79 Milimeter (WxHxL): 101.6 x 26.1 x 147 Weight (max): 4TB, 5TB: 25.4 oz (720 g) 6TB, 8TB: 27.