SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The instructions shall state that an ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in each pole shall be incorporated in the electrical installation of the building. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. In the spaces provided below, record the Model and Serial No.
IMPORTANT SAFETY INSTRUCTIONS 1, Read these instructions, 2. Keep these instructions. 3. Heed all warnings. 9, Do not defeat the safety purpose of the polarized or grounding-type plug, A polarized plug has two blades with one wider than the other, A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety, If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.
ADDITIONAL SAFETY INSTRUCTIONS 15, Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock, 1&Apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should not be placed on the apparatus. 17. Keep your fingers well clear of the disc tray as it is closing, Neglecting to do so may cause serious personal injury, 20. Do not cover the ventilating cooling fan.
• Never disconnect the power cord from a wall outlet while the player is turned on, unless it is in an emergency. Doing so may cause malfunction. • When shipping the player, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. • Do not use volatile liquids, such as insect spray, near the player. Do not leave rubber or plastic products in contact with the player for a long time.
• Moisture condensation damages the unit. Please read the following carefully. Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the unit. • Moisture condensation occurs during the following cases. • When you bring the unit directly from a cold place to a warm place.
HD DVD video discs are high-density, high-capacity discs. • The HD DVD disc standard has been approved by the DVD forum. • HD DVD (single layer): 15 GB HD DVD (dual layer): Maximum capacity of 30 GB A single layer single sided disc (15 GB) has capacity of about 8 hours in 1125 line high definition picture; about 48 hours in 525 line standard definition picture (depending on bitrate of prerecorded contents). "1GB means 1,000,000,000 bytes.
To reach Toshiba Customer Support in the U.S., please call 1 (800) 319-6684 or visit www.tacp.com/customersupport. To reach Toshiba Customer Support in Canada, please call 1 (800) 268-3404 or visit www.toshiba.ca and click on support. This HD DVD player is manufactured under the HD DVD Format adopted by DVD Forum. DVD Forum approved AACS (Advance Access Content System) as content protection system for HD DVD Format like it approved CSS (Content Scramble System) for DVD Format.
• Display ......................................................................................................................................................... 14 • Remote control ............................................................................................................................................. 15 Preparation of the remote control ....................................................................... • Loading batteries ..................................................
Playing repeatedly (Repeat playback) Using EXTENSION ports ...................................................................................... • Using the cursor function • Checking • ................................................................ .................................................................................... the current status and settings .......................................................... 38 39 39 40 Internet connection feature (Outline) ...................
See pages with arrows for details. * The above illustration displays the front panel with the cover open. Note • Do not place a heavy object on the cover while it is open. Doing so may damage the player. ON/STANDBY button / ON/STANDBY indicator (_ page 30 _ (SKIP) button _ page 35 Skips to the next chapter Turns the power on/restores standby mode. the unit to the (_) I<_1 (SKIP) button _ page 35 Skips to the previous (_ Remote sensor _ Front panel display EXTENSION chapter or track.
LAN port _ page 44 (_ Ventilation Use this to connect to a network on broadband connection. with an always- fan Do not cover the ventilation (_ AC IN socket (_) DIGITAL OPTICAL Outputs AUDIO OUTPUT jack _ page 25 digital BITSTREAM/PCM Connect audio signals. (_ VIDEO Connect to a digital audio input on an amplifier equipped with digital audio decoder. When connecting the optional digital the connector into the jack firmly. OUTPUT COMPONENT Outputs monitor.
olsJ• llm_m Ilwmm m a • 1|= _a mm_ llim Status indicator I_ :Playing nn :Pausing : Fast forward : Fast reverse • i II limit• •_mm• m_mmn 1|1|11 •wm_a mum• llll when an HD DVD disc is when a DVD disc is loaded. when a title number _) ADV (Advanced) Illuminates is displayed. indicator when advanced content CHP (Chapter) indicator Illuminates when a chapter number is played. is displayed. CD indicator Illuminates when a CD is loaded.
TV VOL. buttons _page 17 ON/STANDBY button _ page 30 OPEN/CLOSE button_ page 30 DISPLAY button _ page 41 ANGLE button_ page 34 SUBTITLE button_ page 34 MENU button _ page 32 Direction buttons _ page 32, 50 OK button @ page 32, 50 RESUME PLAY buttonOpage RETURN button_page 36 50* II(PAUSE) buttonO page 31 ==(STOP) button_ I_(PLAY) button Opage page 31 31 I , J I (SKIP) button_page 35 button_ page 35 I<< (SKIP) button_ page 35 /!.!._.=_ _<< |_ __tHH <1<1button _ _,a'_e 35 .............
Set up the remote control to operate the player and your TV. Open the cover. Point the remote control at the remote sensor and press the buttons. sensor Withinabout7 m(23ft) Insert batteries. Distance: About 7 m (23 ft) from the front of the remote sensor Angle • Use 2 batteries (AAA sizes). • Make sure to match the + and - on the batteries to the marks inside the battery compartment. • About 30 ° in each direction of the front of the remote sensor Close the cover.
Point the remote control to your TV after you have While holding press the number buttons to enter a corresponding brand code below) of your TV. e.g. To enter 0001 TVCODE 0 entered the brand code. Operate your TV with the buttons below. (see TV lie : To turn on and off the TV TV/DVD • 0 0 1 To change the video L input 0 Hold down. TV MUTE • To mute the TV • Some brands have several codes. Try one by Release one until the remote control can operate your TY The brand code is memorized.
Brand name L×I Maganvox Marantz Memorex MGA Mitsubishi MTC NAD Optonica Panasonic Philco Philips Pioneer Proton Quasar Radio Shack Radio ShacWRealistic RCA 0311 0881 0051 0551 1131 0051 0081 5251 0051 0661 0051 0501 5261 0051 0311 0541 0631 1501 2301 5311 5371 0051 0501 0051 0461 2351 5461 5541 0051 1241 0051 0711 5661 0431 0051 0621 6641 0621 0941 1211 1531 5691 Brand code 0391 1041 0271 0621 2221 0481 0431 0411 1171 0291 0631 5221 0621 0501 0431 1521 0341 0661 5231 0631 0621 0621 2491 0361 09
L I iiii _ /ii ii Connections Connect your player to your A/V system.
Connect the player to your TV to view pictures. Follow the steps 1 to 3 below to make your connection. Check the type of video input on your TV. To view 480p, 720p, 1080i pictures, use the HDMI OUTPUT jack or the COMPONENT OUTPUT jacks to connect to a TV. Some discs may require use of the HDMI OUTPUT jack for viewing of high resolution material. HDMI input 1 HDMI Viewable. iNPUT 21 Most recommended* Viewable. (Some discs may be down converted or require HDMI connection.
Connect the player to your TV. HDMI stands for High Definition Multimedia Interface. HDMI transfers digital audio and uncompressed digital video on a single cable. As a result, audio cables and video cables don't need to be connected separately to a device. The HDMI OUTPUT jack is designed to HDMI Version 1.2a. HDMI INPUT } I I To HDMI OUTPUT Finally connect the supplied power cord to a wall outlet.
Video cable (not supplied) r To COM • iLL j'q ii A_Oe _,_rau_ll ] ..... ............. Iii VIDEOool PUT• ...................................................................................................................... E.......................... ............................. J I i If you obtain analog sound output, connect these jacks to audio input jacks on your TV using the audio cable.
Make the necessary setting. 1 Turn on the connected 2 Press ON/STANDBY ONiSTAN DBY TV and select the input from the player. to turn on the player (_ page 30). 3 Press SETUP to display "SETUP MENU", if not displayed. _ _ -- ON/STANDBY mA/V OK 4 Press • / • to select "Picture" 5 Press • / • to select "Resolution 6 Press •/• then press OK. Setting", to select the resolution your TV as shown then press OK. according -- to the performance SETUP of in the table below.
• Output resolution of the player "Resolution Output jacks on the player Setting" (_ page 23) resoi'ution k...,,/ HDMI OUTPUT COMPONENT S-VIDEO jack OUTPUT jack / VIDEO jacks jack Vl_O 480i 480i 480p (maximum) _* 720p (maximum) _* 1080i (maximum) _* 480p 480i 480p (maximum) 1. 720p (maximum) 1. 1080i (maximum) 1. 720p 480i 480p (maximum) 1. 720p (maximum) 1. 1080i (maximum) 1. 1080i 480i 480p (maximum) 1. 720p (maximum) 1. 1080i (maximum) 1.
You can enjoy mu_ts_..... Dolby ®Digital and DTS = sound. [] ( • Set "Digital Output SPDIF" (_ I page 53), Optical digital cable 1 (not supplied) Caution • When you are connecting (via the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack) an AV decoder that does not have Dolby Digital, DTS or MPEG decoding capability, be sure to set "Digital Output SPDIF" (@ page 53) to "PCM". Otherwise, high volume sound may damage your hearing as well as the speakers.
Manufactured under license from Dolby Laborstories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U,S. and world-wide patents issued and pendling. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 26 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved.
Playback (Basic) Play your favorite disc.
HD DVD • 12cm (43/4in.)/ video disc 8cm (31/4in.) DVD video disc • 12cm (43/4in.)/ 8cm (31/4in.) • Region number 1 or ALL VIDEO The region number of this HD DVD player is 1. If region numbers, corresponding to a specific playable area, are printed on your DVD video disc and you do not find _ or _, or the disc is encoded to permit playback only in regions other than Region 1, disc playback will not be allowed by the player. Audio CD • 12cm (43/4in.)/ DI61T_L HD DVD-R AUDIO 8cm (31/4in.
'!!! • Because HD DVD is a new format, certain disc, • • • • • • • • • • digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact Toshiba Customer Service. Viewing high-definition content and up-converting standard DVD content may require an HDMIcapable input or HDCP-capable DVI input on your display device. Some HD DVD discs and DVD discs may restrict the use of some operation commands or features.
............... Press O Press ON/STANDBY. ON/STANDBY (front panel) or The power turns off and ON/STANDBY indicator on the front panel turns red (standby mode). (remote control). ON/STANDBY indicator ON/STANDBY button When you power on this player for the first time, the setting screen will appear. Please refer to _ page 50 and select "General" > "Clock Set". Check the date and time are set properly and correct them if necessary. When complete, press SETUP to exit. Your player is ready.
1 Turn on the TV or audio system and select the corresponding input source that the player is connected to. 2 Turn the power on. (_ page 30) Load a disc and close the disc tray. page 30) Playback starts. • If playback does not start Press _. If a loaded disc contains a top menu, a top menu appears when you start playback. TOPMENU Depending on the disc, you may need to press _) display a top menu.
Some discs may include a top menu, on which you can view the structure of contents or select a scene. Discs recorded on personal devices such as DVD recorders may contain menus, on which items can be easily selected. MENU TOPMENU Press O" Press 0- A top menu appears. Recorded contents are displayed. Press &/T/
If a disc contains several languages, you can select a preferred language from them to hear. ® @ @ AUDIO During playback, e.g. Start press i--- I. Some HD DVD video discs may not _ display this window. Language code (_ page 59) AUDIO . Press _1 L,,:i_ w_=,,u the audio setting is displayed on the TV screen. Notes • Some discs allow you to change audio selections only via the disc menu.
You can display subtitles on the TV and select a subtitle language from those included on the disc. SUBTITLE Press C221during playback. The current subtitle setting appears. Some HD DVD video discs may not e.g. display this window. Start I Language code (@ page 59) Each time you press _1/I,., "On" and "Off" alternate. Select "On" to view subtitles.
Page 36 I Playbackstartsfromthebeginning ofthecurrentchapterortrack. Whenyoupresstwice,playback startsfromthebeginningofthe previouschapteror track. II During playback, press F-_I. Picture pauses. If you press _ while a picture is paused, you can play the picture During normal playback, ,<1<1 frame by frame. press [_Z]/i----i. <1<1 • To resume normal playback, press : Fast reverse playback • Fast forward playback • Each time you press the button, Some discs may not permit this operation.
Normally titles, chapters, and tracks are numbered. By entering these numbers, you can access a desired section. Press T_c,repeatedly to select the area you want to input. TSEARCH Press O, You may have to press repeatedly, depending on a disc. Press the button until the cursor moves to " area. e,g, egi-Jm_ | _, / lm To enter a title number _. To enter a chapter number _, b To enter the elapsed time Press the number buttons to enter the desired time location on the disc. 666 Off (See right).
iI ,i_!_ii_ ,_ii_I ii!_ii!ii!i_ii_!_i_i_ii!_ii_ !_ Playback (Advanced) Playback variations and other functions.
You can repeat a desired section. z f 7"-_, REPEAT Press I--3. The repeat modes are listed. Press &/1' to select the repeat mode. (The selections on the list vary depending on category or status of a disc.) e,g, All Repeat: Repeats the entire disc. (Not availablein playbackof a disc recordedin DVD VR mode.) Title Repeat: Repeats the same title. Chapter Repeat: Repeats the same chapter. Track Repeat: Repeats the same track. Disc Repeat: Repeats the entire disc.
Depending Available commercial on the features of the disc you HD are using, you may be able to connect USB DVD discs include game game controllers to the EXTENSION ports to use some interactive features. Additional software and drawing software. You can use the features may be supported in the future. cursor function for some software. EXTENSION ports Press _ while a disc with support for cursor use is playing. Use the eight direction buttons to move the cursor.
You can confirm operational status and setting details. DISPLAY Press The following on-screen display appears, (The actual display varies depending on the disc.) %i7'i!,!iii number e.g, number Elapsed time of a title Elapsed time of a chapter 'Video codec Language setting Subtitle setting Angle number Definition Sound output setting *The subtitle setting shows a language code (_ page 59).
Internet connection Connect to a network with an always-on use special content.
If you connect the player to the Internet via an always-on broadband connection, some HD DVD discs enable you to access special HD DVD sites, etc. For example, if an HD DVD site includes content such as movie trailers, you can watch the content on the player via the Internet. On such sites, downloading service of the control program (firmware) updates of the player is also available. You do not need to connect to a PC to use this function.
• Even if the player is properly connected configured, and some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, problems at the provider of the content or compatibility issues. • The communication features of this player comply with the institute of Electrical and Electronic Engineers (IEEE) 802.3.
Connect the player to the Internet via an always-on broadband connection. In addition to accessing special HD DVD sites, this function is used when updates are available for the control program (firmware) of the player. Back view of the player I Regarding the cable used: Use a commercially available straight LAN cable (Category 5/CAT5 or better with RJ45 connector). To LAN )ort t % Broadband modem (with integrated router) service Connecting using a router (e.g.
1 Press SETUP button. 1_ DHCP setting • Set "DHCP" to "On". The network information is automatically ° Set "DNS" to "On". The DNS server is obtained automatically DHCP server. ==J "SETUP MENU" appears. 2 Press •/Y buttons to select "Ethernet", then press OK button. set. 3 On "Ethernet" menu, press •/Y buttons to select "DHCP" then press OK button. 4 Set "DHCP" to "On", then press OK button. from the ..... If a connection cannot be established if "DHCP" is set to "On". ° Set "DHCP" to "Off".
• User information Enter the proxy server address when your provider requires proxy setting. 1 On "Ethernet" menu, press &/Y buttons to select "Proxy setting" then press OK button. Although not directly setting related to the Internet some HD DVD discs may require settings to be configured. 1 On "Ethernet" menu, press k/V 2 Set "Proxy" to "On" then press OK button. connection, the following Information" buttons to select "User then press OK button. 2 Select "User" then press OK button.
Some HD DVD discs enable you to access special HD DVD sites. If an HD DVD site includes content such as movie trailers, you can watch the content on the player via the Internet if your internet connection provides sufficient bandwidth. Connect and configure the player to access the Internet beforehand (_ pages 44 to 46). Insert the HD DVD disc and close the tray. The disc begins to play. If the disc does not begin to play, press _. Select an item from the menu. • If the menu does not appear, press _.
6 Others This chapter includes details on setting on troubleshooting problems.
You can change the default settings to customize performance preference. to your During stop, press "_)P. "SETUP MENU" appears. Press A/T to select the group that contains a desired item, then press (_oK_. Group Returnsto the _revi0usscreen Press &/T to select the setting item, then press (_. -- Start Setting item Refer to the explanations on pages beginning from 52, to change the selection by A/T or other buttons, then press (_oK"). Repeat step 3 and 4 to set other items if necessary.
Group Setting Picture TV Shape Enhanced Level Audio Language Disc Page To select a picture size according of your TV. Black to the aspect ratio To select the black level of playback pictures. 52 52 Picture Mode To select the system of output signal corresponding to playback source. (Only when connected to a PROGRESSIVE TV.) 52 Resolution Setting To select the resolution of the player's output, according to the connected TV.
Video The player filters video signal, and converts it in the 16:9 Select when a 16:9 wide TV is connected. progressive output format appropriately. Suitable for playback of video content pictures. 4:3 Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Either or both of the picture's sides are cut off. Auto Select this position normally.
Note Selects the output sound format when an audio device such as an amplifier to the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack on this player. • Setting "Auto" or "PCM" will reduce output level of multi channel sound from the ANALOG AUDIO OUTPUT jacks and the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack if you: - For details about output sound selection, see _ view the playback page 60. Bitstream Select this when an amplifier equipped Digital, DTS or MPEG decoder to this player.
Others To make a further language choice. To select a preferred language for disc menus. After pressing OK button, follow steps 1) -4) English 1) Obtain the language To display disc menus in English. from the Language French below. code of the preferred language code list (_ page 59). 2) Select the first character by pressing •/V To display disc menus in French. 3) Press 4/1_ by pressing •/T Japanese buttons. buttons to shift. Select the second character buttons.
To select a preferred language for on-screen displays. English To view on-screen display in English. French To view on-screen display in French. Japanese To view on-screen display in Japanese. German To view on-screen display in German.
HD DVD and DVD video discs equipped function have a predetermined with the Parental Lock limitation level. The limitation level or limitation method may differ depending on the disc. FRANCE FR GERMANY DE INDONESIA ID ITALY IT For example the whole contents of a disc may not be played JAPAN JP back, or an extreme violent scene may be cut or replaced automatically by another scene.
iHli il;li! To set the clock of the player. 1 Press •/Y To turn on or off the confirmation beeper announcing each remote command is received. buttons to select the input area. when On Turns on the beep sound. Off Turns off the beep sound. A/T to change 2 Press the number buttons to change the digit to set the date and time. 3 Press •/V time zone.
_nt_ _nc_;_ (including internet firmware update) Initialize To reset all the settings listed on _ default. page 53 to factory set Press 4/1_ buttons to select "Yes" then press OK button. Update (Firmware update) To determine the current firmware version. Or To download the latest firmware from the Toshiba server. Before you can use this function, the player needs to be connected to the Internet via an always-on broadband connection. For details on connecting, refer to the "lnternet connection" chapter.
Abbreviation CHI (ZH) DUT (NL) ENG (EN) FRE (FR) GER (DE) ITA (IT) JPN (JA) KOR (KO) MAY (MS) Language Abbreviation Language Abbreviation Language No alternate GN Guarani PT language Chinese GU HA Gujarati Hausa QU RM Portuguese Quechua Rhaeto-Romance Dutch HI HR Hindi Croatian RN RO Kirundi Rumanian HU Hungarian Armenian RU Russian RW SA Kinyarwanda Sanskrit SD SG Sindhi English French German Italian HY IA Japanese Korean IE IK Malay IN IS Inupiak Indonesian Icelandic In
DD plus True HD HD DVD Video Standard contents Advanced dts-HD L-PCM DD L-PCM MPEG DD L-PCM DVD-Video CD DVD-VR dts MPEG L-PCM dts DD HD DVD Video Standard contents Advanced con. 44.1kHz 44.1 kHz 48kHz 96kHz 192kHz dts-HD L-PCM 48kHz 96kHz 192kHz MPEG Depends on contents. DD L-PCM MPEG DD L-PCM DVD-Video DVD-VR 48k 96k L-PCM MPEG DD plus True HD CD 48k 96k 192k con. HD DVD-R HD DVD-R 48kHz 96kHz 192kHz dts MPEG L-PCM dts DD L-PCM MPEG 48kHz 96kHz 44.1 kHz 44.
Notes • Some discs allow you appropriate language • When you turn on the Depending on a disc, • Immediately after you • The BITSTREAM/PCM • The ANALOG AUDIO to change audio selections only via the disc menu. If this is the case, press MENU button and choose the from the selections on the disc menu. player or replace a disc, the player returns to the initial default setting. ( _ page 54) a specific type of audio the disc has is output.
This document is statement purpose only. Not concerned with operation of this product. The software pre-installed in the TOSHIBA HD DVD player consists of multiple, independent is copyrighted by TOSHIBA or a third party. The TOSHIBA HD DVD player uses software components copyright notice (hereinafter referred to as a "EULA"). that are distributed software components.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.
original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
F ExhibitB GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright © 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1 .
such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany tile combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8.
ExhibitC LICENSE ISSUES This package The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. Eric Young (eay@cryptsoft.com). See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org. OpenSSL License Copyright © 1998-2002 The OpenSSL Project. All rights reserved.
ExhibitD This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail. COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: If you modify libpng you may insert additional following this sentence. libpng version 1.2.
If you experience any of the following your nearest Toshiba dealer. difficulties while using this unit, check • No power. _ Is tile power plug disconnected? • No picture. _ Is the cable for connecting Check the connections *'-Switch (_ the list below • No sound. or not connected properly? page 21 - 22) TV to the signal from the player. *'-Are both the HDMI OUTPUT jack and the COMPONENT (_ consulting Check tile power connection.
• • Power requirement • Power supply (L, R) x 2 systems • Mass External • VIDEO • laser, Wavelength: 405nm/650nm/ • port HDMI output Remote control Wireless remote control (SE-R0252) output • Operating conditions Temperature: 41°F - 95°F (5°C - 35°C), Pin jack x 1 system S-VIDEO EXTENSION x 1 19 pin 1.
Limited United States Warranty Digital Audio Video ("DAV") Product-Depot Repair Warranty Toshiba America Consumer Products, L,L,C, ("TACP") makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE, DAV PRODUCTS PURCHASED IN THE U,S,A, AND USED ANYWHERE OUTSIDE OF THE U.
How to Obtain Warranty Services If, after following all of the operating instructions in this manual and checking the section "Before calling service personnel", you find that service is needed: (1) For instructions on how to obtain warranty service for your DAV Product, contact TACP's Consumer Solution Center toll-free at 1-800-319-6684, (2) You must include a copy of original bill of sale or other proof of purchase along with the entire DAV Product to the Depot Warranty Repair Center specified by the
TOSHIBA -IMPORTANTCANADIAN WARRANTY INFORMATION GARANTIE CANADIENNE STANDARD WARRANTY TYPE OF SET WARRANTY PERIOD GARANTIE NORMALE TYPE D'APPAREIL DVD Player DVD/VCR Combination Home Theatre in a Box DVD Recorder Portable DVD DVD/magnetoscope combo Cinema maison dans une bo_te Enregistreur DVD DVD Portatif 12 MONTHS CANADIAN DUREE DE LAGARANTIE: WARRANTY Warranty Information All in-warranty repairs must be made by an authorized TCL service centre.
INFORMATION ON CUSTOMER SUPPORT HD DVD is a new and evolving format, so changes and improvements are possible. To obtain updated information about HD DVD and this product, as well as customer support information about this product, please contact Toshiba Customer Support: * In the U.S., please call 1 (800) 319-6684 or visit www.tacp.com/customersupport. * In Canada, please call 1 (800) 268-3404 or visit www.toshiba.ca and click on support.