User MANUAL Wireless LAN with Bluetooth module Model Name: GN-4030 Brand: TOSHIBA GC-4030 Page 1/10 2019/6/19
CONTENT 1 PRODUCT OVERVIEW ...................................................................................................................... 6 1.1 FEATURES .................................................................................................................................. 6 1.2 GENERAL SPECIFICATIONS......................................................................................................... 6 1.3 BOARD OUTLINE .............................................................
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
20 cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.
questions concerning this document or the responsibilities of the OEM integrator IC statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.
1 PRODUCT OVERVIEW 1.1 FEATURES Operate at 2.4GHz / 5GHz band 867Mbps PHY Rate Support 2T2R Mode USB 2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed IEEE standards support: IEEE 802.11a/b/g and 802.11n/ac Bluetooth supports up to V4.2 802.11i- WEP 64/128, AES, TKIP RoHS compliance Halogen Free compliance 1.2 GENERAL SPECIFICATIONS Main Chipset RTL8822BU Standard IEEE 802.11ac/a/b/g/n , Bluetooth 4.2 LE Bus Interface USB 2.
11n @ MCS7 (2.4g HT20): (Max.) : -67dBm , (Typical) : -74.5dBm (PER<10%) 11n @ MCS7 (5g HT20): (Max.) : -67dBm , (Typical) : -73.5dBm (PER<10%) 11n @ MCS7 (5g HT40): (Max.) : -64dBm , (Typical) : -70dBm (PER<10%) Bluetooth: 1DH5 BDR: (Max.): -86 dBm , (Typical): -95.5 dBm (BER < 0.1%) 2DH5 EDR: (Max.): -86 dBm , (Typical): -92.5 dBm (BER < 0.01%) 3DH5 EDR: (Max.): -80 dBm , (Typical): -86 dBm (BER < 0.10%) BLE : (Max.): -90dBm , (Typical): -97dbBm (PER<30.
1.4 CONNECTOR PIN CONFIGURATION WTB Connector (SM07B-PASS) Pin Description 1 3.3VS 2 RESET(Chip-EN) 3 WL_WAKE_HST 4 HST_WAKE_WL 5 GND 6 BT_WAKE_HST 7 HST_WAKE_BT USB miniB Connector (KS-BS-5B-L) Pin Description 1 NC 2 D3 D+ 4 NC 5 GND 1.5 CONNECTOR SPEC WTB Connector (SM07B-PASS) Model No. SM07B-PASS GC-4030 Dimensions A 12.
USB miniB Connector (KS-BS-5B-L) 1.
1.