User’s Manual P300/P300D Series computers.toshiba-europe.
P300/P300D Series Copyright © 2008 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. Toshiba P300/P300D Series Portable Personal Computer User's Manual First edition February 2008 Ownership and copyright of music, video, computer programs, databases, etc. are protected by the copyright laws.
P300/P300D Series AMD, the AMD Arrow logo, AMD Athlon, AMD Turion, Radeon, and combinations thereof, ATI Mobility Radeon are trademarks of Advanced Micro Devices, Inc. Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated. Bluetooth is a registered trademark owned by its proprietor and used by TOSHIBA under license. ConfigFree is a trademark of TOSHIBA Corporation. The HD DVD Logo is a trademark of DVD Format/Logo Licensing Corporation.
P300/P300D Series ■ Be sure that nothing rests on your AC adapter's power cable and that the cable is not located where it can be tripped over or stepped on. ■ Place the AC adapter in a ventilated area, such as a desk top or on the floor, when you use it to run the computer or to charge the battery. Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case.
P300/P300D Series This product and the supplied accessories are designed to observe the required EMC (Electromagnetic Compatibility) standards. However, Toshiba cannot guarantee that this product still observes these EMC standards if accessories or cables not manufactured/distributed by Toshiba are connected or implemented.
P300/P300D Series Modem warning notice Conformity Statement The equipment has been approved to [Council Decision 98/482/EC - "TBR 21"] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
P300/P300D Series ENERGY STAR® Program Your computer model may be ENERGY STAR® Compliant. If the model you purchased is compliant, it is labeled with the ENERGY STAR® logo on the computer and the following information applies.TOSHIBA is a partner in the Environmental Protection Agency’s (EPA) ENERGY STAR® Program and has designed this computer to meet the latest ENERGY STAR® guidelines for energy efficiency.
P300/P300D Series Hitach-LG Data Storage DVD Super Multi GSA-T40F/GSA-T40N ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
P300/P300D Series Panasonic DVD Super Multi UJ-870B ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
P300/P300D Series Pioneer DVD Super Multi DVR-KD08 ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
P300/P300D Series TOSHIBA SAMSUNG STORAGE TECHNOLOGY CD-RW/DVD-ROM Drive TS-L462D ■ The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
P300/P300D Series TOSHIBA SAMSUNG STORAGE TECHNOLOGY 8x slim DVD Writable Drive TS-L632H ■ This DVD writable drive employ a laser system to ensure proper use of this product, please read this instruction manual carefully and retainfor future reference. Should the unit ever require maintenance, contact an authorized service location-see service procedure. ■ Use of controls or adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
P300/P300D Series TOSHIBA HD DVD-ROM Drive SD-L802B ■ This HD DVD-ROM drive employ a laser system to ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location-see service procedure. ■ Use of controls or adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
P300/P300D Series TOSHIBA HD DVD-RW Drive SD-L912A ■ This DVD writable drive employ a laser system to ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location-see service procedure. ■ Use of controls or adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
P300/P300D Series International Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station." To prevent direct exposure to the laser beam, do not try to open the enclosure.
P300/P300D Series OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
P300/P300D Series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
P300/P300D Series Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.
P300/P300D Series Table of Contents Chapter 1 Introduction Equipment checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12 TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13 Utilities and Applications. . . . . . . . . . .
P300/P300D Series Chapter 4 Operating Basics Using the TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Using the fingerprint sensor (FingerPrint sensor is provided with some models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 USB Sleep and Charge function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 Using the Web Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Using the microphone . . . . . .
P300/P300D Series Chapter 8 Optional Devices ExpressCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 SD/SDHC/MMC/MEMORY STICK/MEMORY STICK PRO/xD Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Additional battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P300/P300D Series Preface Congratulations on your purchase of the P300/P300D Series computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells you how to set up and begin using your P300/P300D Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
P300/P300D Series Chapter 5, The Keyboard, describes special keyboard functions including hot keys. Chapter 6, Power and Power-Up Modes, gives details on the computer's power resources and battery save modes. Chapter 7, HW Setup explains how to configure the computer using the HW Setup program. Chapter 8, Optional Devices, describes the optional hardware available.
P300/P300D Series ABC When procedures require an action such as clicking an icon or entering text, the icon’s name or the text you are to type in is represented in the type face you see to the left. Display ABC Names of windows or icons or text generated by the computer that appears on its display screen is presented in the type face you see to the left. Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below.
Introduction Chapter 1 Introduction This chapter provides an equipment checklist, and it identifies the computer's features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
Introduction ■ TOSHIBA HD DVD PLAYER* (HD DVD model only) ■ TOSHIBA FingerPrint Utility *(FingerPrint support model only) ■ TOSHIBA SD Memory Utilities ■ TOSHIBA Disc Creator ■ TOSHIBA Face Recognition* ■ TOSHIBA Acoustic Silencer ■ Ulead Movie Factory® for TOSHIBA* ■ Presto! BizCard 5 *(Provided with some models) ■ Online Manual(optional) Other software may be preinstalled dependant on the model purchased. * The availability of this software is dependent on the model you purchased.
Introduction Memory Slots PC2-5300 (PM965/GM965/RS690M)/PC2-4200 (GL960) 512 MB, 1024 MB or 2048 MB. Up to 2 GB memory module can be installed in the memory slot for a maximum of 4 GB (PM965/GM965/M690G), 2 GB (GL960) system memory total, depending on the model you purchased. Main Memory Disclaimer Part of the main system memory may be used by the graphics system for graphics performance and therefore reduce the amount of main system memory available for other computing activities.
Introduction Video RAM Depending on the model you purchased. Mobile Intel® GM965 Express Chipset/Mobile Intel® GL960 Express Chipset model: Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology. Mobile Intel® GM965 Express Chipset/Mobile Intel® PM965 Express Chipset model in graphic chip by ATI Mobility Radeon™ HD 3470: External 64/128/256 MB.
Introduction Disks Hard disk Disclaimer 1 Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 230 = 1,073,741,824 bytes, and therefore shows less storage capacity. Available storage capacity will also be less if the product includes one or more pre-installed operating systems, such as Microsoft Operating System and/or preinstalled software applications, or media content.
Introduction DVD Super Multi drive Some models are equipped with a full-size DVD (Supporting DVD±R Super Multi drive module that lets you record data DL) to rewritable CD/DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROM's at maximum 8 speed and CD-ROM's at maximum 24 speed. It writes CD-R's at up to 24 speed, CD-RW's at up to 16 speed, DVD-R's at maximum 8 speed, DVD-RW's at maximum 6 speed.
Introduction HD DVD-ROM User’s Manual Some models are equipped with a full-size HD DVDROM drive module that lets you run CD's or DVD's without using an adaptor. The drive reads DVD-ROM's at a maximum 8x speed and CD-ROM's at a maximum 24x speed, and HD DVD's at a maximum 1x speed and writes CD-R's at up to 16x speed, CD-RW's at up to 10x speed, DVD-R's and DVD+R's at up to 4x speed, DVDRW's and DVD+RW's at up to 4x speed, DVD-R (Dual layer) at up to 2x speed, DVD+R (Double Layer) at up to 2.
Introduction HD DVD-RW drive User’s Manual Some models are equipped with a full-size HD DVD-R drive module that lets you run CD's or DVD's without using an adaptor. The drive reads DVD-ROM's at a maximum 8x speed and CD-ROM's at a maximum 24x speed, and HD DVD's at a maximum 1x speed and writes CD-R's at up to 16x speed, CD-RW's at up to 4x speed, DVD-R's and DVD+R's at up to 4x speed, DVDRW's and DVD+RW's at up to 4x speed, DVD-R (Dual layer) at up to 2x speed, DVD+R (Double Layer) at up to 2.
Introduction Display The computer's LCD panel supports high-resolution video graphics. The screen can be set at a wide range of viewing angles for maximum comfort and readability. Built-In 17" WXGA+ 16 M colors, with the following resolution: 1440 horizontal × 900 vertical pixels Graphics Controller Graphics controller maximizes display performance. Refer to Display Controller and Modes section in Appendix B, Display Controller and Modes for more information.
Introduction Slots ExpressCard The ExpressCard expansion slot that can accommodate two standard module formats; an ExpressCard/34 module and an ExpressCard/54 module. An ExpressCard module is a small addin card technology based on the PCI Express and Universal Serial Bus (USB) interfaces. Multiple Digital Media Supports SD/SDHC memory card, MMC, Card Slot MEMORY STICK, MEMORY STICK PRO and xD Picture card. Multimedia Web Camera Record/Send still or video images with this integrated webcam.
Introduction Wireless LAN Where present, it supports the A,B,G and draft N standards but it is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE 802.11 Standard. ■ Automatic Transmit Rate Select mechanism in the transmit range of 54, 48, 36, 24, 18, 12, 9 and 6 Mbit/s. (IEEE 802.11a/g) ■ Automatic Transmit Rate Select mechanism in the transmit range of 11, 5.5, 2 and 1 Mbit/s. (IEEE 802.
Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hot Keys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program. Instant Security The hot key function Fn + F1 blanks the screen and disables the computer, providing data security.
Introduction Hibernation This feature lets you turn off the power without exiting from your software. The contents of main memory are saved to the hard disk so that when you turn on the power again, you can continue working right where you left off. Refer to the Turning off the power section in Chapter 3, Getting Started, for details. Sleep Mode If you have to interrupt your work, you can turn off the power without exiting from your software.
Introduction TOSHIBA Accessibility The TOSHIBA Accessibility utility provides support to movement impaired users when they need to use the TOSHIBA Hot-key functions. In use, the utility allows you to make the Fn key "sticky", that is you can press it once, release it, and then press one of the "F" keys in order to access its specific function. When set, the Fn key will remain active until another key is pressed. TOSHIBA Button Support This utility controls the button operation of the computer.
Introduction TOSHIBA DVD-RAM Utility TOSHIBA DVD-RAM Utility has a Physical Format function and Write-Protect function to DVD-RAM. This utility is contained in the TOSHIBA Disc Creator setup module. To run TOSHIBA DVD-RAM Utility, click , select All Programs, TOSHIBA, CD&DVD Applications, and then click DVD-RAM Utility. CD/DVD Drive Acoustic Silencer This utility allows you to configure the read speed of the CD drive.
Introduction TOSHIBA DVD PLAYER (Depending on configuration) The DVD PLAYER is used to play DVD Video. It has an on-screen interface and functions. TOSHIBA HD DVD PLAYER (Depending on configuration) The HD DVD PLAYER is used to play HD DVD Video. It has an on-screen interface and functions. (Provided with some models) TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections.
Introduction Windows Mobility Center This section describes the Windows Mobility Center. Mobility Center is a utility for accessing several mobile PC settings quickly in one window. A maximum of eight tiles are prepared as the operating system default. Two additional tiles are also added to your Mobility Center. Installing the "TOSHIBA Extended Tiles for Windows Mobility Center" package will add the following functions. ■ Lock Computer: Lock your computer without turning it off.
The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer's front with its display panel in the closed position.
The Grand Tour Power LED The Power indicator glows blue when the computer is on. If you select Sleep Mode from Turn Off Computer, this indicator flashes orange (one second on, two seconds off) while the computer enters Sleep Mode. Battery LED The Battery indicator shows the condition of the battery's charge: Blue indicates a full charge, orange indicates that the battery is charging and flashing orange indicates a low battery charge. Refer to Chapter 6, Power and Power-Up Modes.
The Grand Tour Left side The following figure shows the computer's left side. External Monitor Port Cooling Vents Universal Serial Bus (USB 2.0) TV Out Port HDMI port LAN Jack Express Card Slot i.LINK (IEEE 1394a) Port The left side of the computer External Monitor Port This 15-pin port lets you connect an external video display. Cooling Vents Cooling vents help prevent the CPU from overheating. Do not block the cooling vents.
The Grand Tour i.LINK (IEEE1394a) Port This port allows you to connect an external device, such as a digital video camera, for highspeed data transfer. (Provided with some models) Right side The following figure shows the computer's right side. ODD Indicator USB Ports Modem Jack or FM Antenna Jack* Eject Button Emergency Eject Hole Security Lock DC in 19V Jack The right side of the computer * The figure shows Modem Jack.
The Grand Tour DC IN 19V Jack The AC adaptor connects to this socket. Use only the model of AC adaptor that comes with the computer. Using the wrong adaptor can damage your computer. Backside The following figure shows the computer's back panel. The backside of the computer Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer.
The Grand Tour Hard Disk Cover This cover protects the hard disk. Battery Pack Lock Slide this lock to prepare the battery pack for removal. Battery Pack The battery pack powers the computer when the AC adaptor is not connected. For detailed information on the battery pack, refer to Chapter 6, Power and Power-Up Modes. Battery Release Latch Slide and hold this latch to release the battery pack for removal.
The Grand Tour User’s Manual Speakers The speakers emit sound generated by your software as well as audio alarms, such as low battery condition, generated by the system. Display Screen The LCD displays high-contrast text and graphics. Refer to Appendix B, Display Controller and Modes. When the computer operates on the AC adaptor the display screen’s image will be somewhat brighter than when it operates on battery power. The lower brightness level is intended to save battery power.
The Grand Tour TouchPad A TouchPad located in the centre of the palm rest is used to control the on-screen pointer. Fingerprint Sensor Just by swiping the finger against the fingerprint sensor, the following functions will be enabled: Log-on to Windows and access a securityenabled homepage through IE (Internet Explorer) Files and folders can be encrypted/decrypted and third party access to them prevented. Disable the password-protected screensaver when returning from power-saving (Sleep) mode.
The Grand Tour About the HD DVD This section describes the features, use of HD DVD and HD DVD Media. Summary HD DVD allows users to enjoy video, concerts and other packaged content by taking advantage of its large amount of storage space and high-quality audio and video. HD DVD also allows for the storage of long video when combined with the latest video compression technologies.
The Grand Tour ■ Dolby Digital audio enhancements are only supported by Microsoft® Windows® operating system. Content with high sample rates of 48kHz or more are downsampled when output through either the built-in speakers or headphone jack. ■ This device supports AACS (Advanced Access Content System) next generation copy protection technology. Renewal of the AACS key integrated into this device is required for uninterrupted enjoyment of HD DVD. An Internet connection is required when renewing the key.
The Grand Tour DVD Super Multi drive (Supporting DVD±R DL) The full-size DVD Super Multi drive module lets you record data to writable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the centre of a disc and faster at the outer edge.
The Grand Tour HD DVD-RW drive The full-size HD DVD-RW drive module lets you run either 12 cm (4.72") HD DVDs,12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the centre of a disc and faster at the outer edge.
The Grand Tour AC adaptor The AC adaptor converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any country/region. To recharge the battery, simply connect the AC adaptor to a power source and the computer. Refer to Chapter 6, Power and Power-Up Modes, for details.
The Grand Tour Remote controller (Provided with some models) A remote controller, which is provided with some models, enables you to perform some functions of your computer from a distant location. You can use your remote controller with Media Center to play CDs, DVDs and videos, to view pictures. The remote controller helps you to control the playback of a movie through Media Center. Using the remote controller, you can: ■ Navigate and control all Media Center windows. ■ Control the video.
The Grand Tour User’s Manual Power Starts or terminate the operating system.This button functions like the power button of your computer. By default, the Sleep mode is equivalent to the power off state of your computer. To change the setting, click Start Control panel System and Maintenance Power Options Choose what the Power button does. The following four options are available: Do nothig, Sleep, Hibernate and Shut down. Volume + Increases the volume while viewing DVDs or replaying CDs.
The Grand Tour Replay Moves media backward (seven seconds for videos, one music track or one DVD chapter at a time). Stop Stops the media currently playing. Skip Moves media forward (30 seconds for videos, one music track or one DVD chapter). Using the remote controller Some computers include a remote control unit, which allows you to control some of your computer’s functions from a distant location. ■ The remote controller is designed specifically for this computer.
The Grand Tour Even if within the effective scope as described above, the remote controller may malfunction or not work correctly in the following cases. ■ When an obstacle stands between the infrared receiver window of your computer and the remote controller. ■ When direct sunlight or strong fluorescent light strikes the infrared receiver window. ■ When the infrared receiver window or the infrared emission part of the remote controller is dirty.
The Grand Tour Type of battery that can be used for the remote controller When the provided batteries run down, please replace them with adequate ones. CR2016 type battery is available. Other types or battery should not be used. Installing the batteries 1. Open the battery cover on the back side of the remote controller. Battery Cover Opening the battery cover 2. Be sure to place the batteries with correct polarities.
The Grand Tour Slim size remote controller 1. Open the battery cover on the back side of the remote controller. 2. Hold down the stopper and slide the battery out of battery case. Stopper Battery Removing the batteries 3. Insert the battery in place. Be sure to place the batteries with correct polarities. Press the battery down to the stopper then push it forward to fit into the battery case. 4. Close the battery cover. Close the cover securely until it clicks.
Getting Started Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Be sure also to read the Safety Instruction Manual. This guide, which is included with the computer, explains product liability.
Getting Started 4. Secure the Battery Pack Lock to ensure the battery is locked into place. Later, when you want to remove the battery you must disengage this lock first. Battery Pack Lock Battery Release Latch Securing the battery pack Refer to Removing the battery pack section in Chapter 6, Power and Power-Up Modes,for removing the battery pack. Connecting the AC adaptor Attach the AC adaptor when you need to charge the battery or you want to operate from AC power.
Getting Started ■ Use only the AC adaptor supplied with your computer or an equivalent adaptor that is compatible. Use of any incompatible adaptor could damage your computer. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor. ■ When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in the User's Manual.
Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. Opening the display Turning on the power This section describes how to turn on the power.
Getting Started Turning on the power Windows Vista™ setup When you first turn on the power, the computer's initial screen is the Microsoft® Windows Vista™ Startup Screen Logo. Follow the on-screen directions. Be sure to read the Windows End User License Agreement display carefully. Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Sleep Mode.
Getting Started Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge. Sleep Mode If you have to interrupt your work, you can turn off the power without exiting from your software. Data is maintained in the computer's main memory. When you turn on the power again, you can continue working right where you left off. ■ When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options.
Getting Started ■ Click , click power button located in the power management buttons , or click arrow button and select Sleep from the menu. ■ Close the display panel. This feature must be enabled. Please refer to the Power Options (to access it, click Control Panel System and Maintenance Power Options). When you turn the power back on, you can continue where you left when you shut down the computer. You can also enable Sleep Mode by pressing Fn + F3. Refer to Chapter 5, The Keyboard, for details.
Getting Started Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits: ■ Saves data to the hard disk when the computer automatically shuts down because of a low battery. ■ You can return to your previous working environment immediately when you turn on the computer. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the duration set by the System hibernate feature. ■ You can use the panel power off feature.
Getting Started Restarting the computer Certain conditions require that you reset the system. For example, if: ■ You change certain computer settings. ■ An error occurs and the computer does not respond to your keyboard commands. ■ There are three ways to reset the computer system: 1. Click then click the arrow icon located in the power management button , and select Restart from pull down menu. 2. Press Ctrl + Alt + Del to display the menu window, then select Restart from the Shut down options. 3.
Getting Started Restoring the pre-installed Software Depending on the model you purchased, different ways for restoring the pre-installed software are offered: ■ Creating optical Recovery Discs ■ Restoring the pre-installed software from your created Recovery Discs. ■ Restoring the pre-installed software from the Recovery hard disk drive ■ Restoring the pre-installed software from the bundled Product Recovery DVD-ROM (optional).
Getting Started 5. Double click the Recovery Disc Creator icon on the Windows Vista® desktop, or select the application from Start Menu. 6. After Recovery Disc Creator starts, select the type of media and the title you wish to copy, and then click the Create button. 7. Follow the on-screen instructions. Your Recovery Discs will be created.
Getting Started When the sound mute feature has been activated by pressing the Fn + ESC key, be sure to disable this to allow sounds to be heard before starting the restore process. Please refer to Chapter 5, The Keyboard for further details. Be sure to connect the AC adaptor, otherwise you may run out of battery during the recovery process. When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. 1. Turn off the computer. 2.
Getting Started 4. A menu will be displayed from which you should follow the on-screen instructions. 5. If your computer came with additional software installed, this software can not be recovered from the Product Recovery DVD-ROM. Re-install these applications (e.g. Works Suite, Games, etc.) separately from other media.
Operating Basics Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad, optical media drives, sound system, modem, the wireless LAN and LAN. It also provides tips on caring for your computer. Using the TouchPad To use the TouchPad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.
Operating Basics Do not press on the TouchPad too hard or press a sharp object such as a ball point pen against the TouchPad. The TouchPad could be damaged. For some functions, you can tap the TouchPad instead of pressing a control button. Click: Double-click: Drag and drop: Scroll: Tap the TouchPad once Tap the TouchPad twice 1. Hold down the left control button and move the cursor to drag the item you want to move. 2. Lift your finger to drop the item where you want it.
Operating Basics 3. Ensure the center of the fingerprint is on the sensor when swiping the finger. Slide the finger over the recognition sensor ■ Avoid swiping with the finger stiff or pressed-on too hard: Fingerprint reading may fail if the center of the fingerprint is not touching on the sensor, or when finger is swiped while pressing hard. Make sure that the center of the fingerprint is touching the sensor before swiping.
Operating Basics Observe the following before you place your finger on the sensor whether for fingerprint enrollment/registration or recognition. ■ Wash and dry your hands thoroughly. ■ Remove static electricity from your fingers by touching any metal surface. Static electricity is a common cause of sensor failures, especially when the weather is dry. ■ Clean the sensor with a lint-free cloth. Do not use detergent to clean the sensor.
Operating Basics How to delete the fingerprint data Saved fingerprint data is stored in the Non-volatile memory inside the fingerprint sensor. If you hand over the PC to others, or dispose of it, the following operations are recommended. 1. Click Start, point to All Programs, point to TrueSuite Access Manager and click it. 2. The TrueSuite Access Manager Fingerprint Software screen is displayed. 3. Enter your Windows Password and click Next to enter the Control Center.
Operating Basics Set up procedure Please use the following procedure when first using fingerprint authentication. Fingerprint registration Enroll the required authentication data using the Fingerprints Enrollment Wizard. ■ The fingerprint authentication uses the same Windows logon ID and password. If the Windows logon password has not been setup, please do so before registration. ■ Up to 30~34 fingerprint patterns can be registered. 1.
Operating Basics Fingerprint authentication procedure 1. Start up the computer. 2. The Logon Authorization screen is displayed. Choose any of the enrolled fingers and swipe the fingerprint on the sensor. If authentication is successful, the user will be logged on to Windows. ■ If the fingerprint authentication fails, please logon using the Windows logon password. ■ Please logon using the Windows logon password if the fingerprint authentication failed for five times.
Operating Basics How to enable fingerprint system boot authentication settings It is necessary to first enroll your fingerprint with the TrueSuite Access Manager application prior to enabling and configuring the fingerprint PreOS feature. Check that your fingerprint is enrolled before configuring the settings. 1. Swipe your finger across the fingerprint sensor. Or enter Windows password and click Next. 2. Click settings. 3. The Administrator Settings screen is displayed.
Operating Basics Fingerprint utility limitations TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free. TOSHIBA does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Operating Basics Metal paper clips or hair pins/clips will generate heat if they come into contact with USB ports. Do not allow USB ports to come into contact with metal products, for example when carrying the computer in your bag. How to enable/disable USB sleep and charge function You can set enable/disable USB sleep and charge function in HW setup Refer to the USB Sleep and Charge function in Chapter 7, HW Setup.
Operating Basics Using the software The web camera software is pre-configured to start when you turn on Windows Vista; if you need to restart it go to Start All Programs Camera Assistant Software Camera Assistant Software. Capture Still Images Video Recording Audio Recording Function Display Window Camera resolution Effects User’s Manual Mute Capture Still Images Click to see a preview of the captured image; you can also e-mail the image. Video Recording Click to prepare for recording.
Operating Basics Settings Choose from the: Options tab to change the tool bar position; the Picture tab to select picture output options such as size, export file and save path; the Video tab to choose video output settings such as Frame Rate, Size, Compression and the frame rate, size, record compressor, and save path; the Audio tab to change the audio device, audio compressor, audio volume and save path. Help Displays the help files for the software.
Operating Basics Loading discs To load a disc, follow the steps below and refer to the figures. 1. a. When the power is on, press the eject button to open the drawer slightly. Eject Button Pressing the eject button b. Pressing the eject button will not open the drawer when the disc drive's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Operating Basics 2. Grasp the drawer gently and pull until it is fully opened. Pulling the drawer open 3. Place the disc, label side up, in the drawer.
Operating Basics When the drawer is fully opened, the edge of the computer will extend slightly over the disc tray. Therefore, you will need to turn the disc at an angle when you place it in the tray. After seating the disc, however, make sure it lies flat, as shown in the figure above. ■ Do not touch the laser lens. Doing so could cause misalignment. ■ Keep foreign matter from entering the drive. Check the back edge of the tray to make sure it carries no debris before closing the drive. 4.
Operating Basics Removing discs To remove the disc, follow the steps below and refer to the figure. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical media drive indicator to go out before you open the drawer. Also, if the disc is spinning when you open the drawer, wait for it to stop before you remove it. 1. To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened.
Operating Basics Writing CD/DVD with the DVD Super Multi drive or HD DVD-ROM drive supporting DVD±R DL Some models in this series are equipped with Writing CD/DVD with the DVD Super Multi drive or HD DVD-ROM drive (Supporting DVD±R DL). You can use the DVD Super Multi drive or HD DVD-ROM drive to write data to either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are preinstalled: TOSHIBA Disc Creator and TOSHIBA Direct Disc Writer. Ulead Movie factory for TOSHIBA.
Operating Basics DVD-RW: DVD+RW: DVD-RAM: DVD Specifications for Recordable Disc for Version 1.1 or 1.2 Victor Company of Japan, Ltd. (JVC) MITSUBISHI KAGAKU MEDIA CO, LTD. MITSUBISHI KAGAKU MEDIA CO, LTD. DVD Specifications for DVD-RAM Disc for Version2.0, 2.1 or 2.2 Hitachi Maxell Ltd. Matsushita Electric Industrial Co., Ltd.
Operating Basics ■ Before you enter Sleep Mode/Hibernation Mode, be sure to finish DVDRAM writing. Writing is finished if you can eject DVD-RAM media. ■ Be sure to close all other software programs except the writing software. ■ Do not run software such as a screen saver, which can put a heavy load on the CPU. ■ Operate the computer under the power scheme High Performance. Do not use power-saving features. ■ Do not write while virus check software is running.
Operating Basics ■ Always copy data from the hard disk drive to the CD-R/-RW,DVD-R/ -RW/-RAM or DVD+R/+RW disc. Do not use cut-and-paste. The original data will be lost if there is a write error. Disclaimer (DVD Super Multi drive or HD DVD-ROM drive supporting DVD±R DL) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may be caused by writing or rewriting with this product.
Operating Basics When writing information to media using an optical drive, you should always ensure that you connect the AC adaptor to a live power socket. It is possible that, if data is written while powered by the battery pack, the write process may sometimes fail due to low battery power - these instances data loss may occur.
Operating Basics DVD+R DL: TAIYO YUDEN CO., LTD. MITSUBISHI KAGAKU MEDIA CO., LTD. RICOH Co., Ltd. Hitach Maxell Ltd. (High-Speed, Multi Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. RICOH Co., Ltd. (Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. DVD Specifications for Recordable Disc for General Version 2.0 TAIYO YUDEN CO., LTD. Matsushita Electric Industrial Co., Ltd. MITSUBISHI KAGAKU MEDIA CO., LTD. RICOH Co., Ltd. DVD Specifications for Recordable Disc for General Version 1.1 or 1.
Operating Basics ■ If the disc is poor in quality, or is dirty or damaged, writing or rewriting errors may be noted - ensure that you check all discs for dirt or damage before you use them. ■ The actual number of rewrites to CD-RW, DVD-RW, DVD+RW, DVDRAM or HD DVD-RW media will be affected by the quality of the disc itself and the way in which it is used. ■ There are two types of DVD-R media available, authoring discs and general use discs.
Operating Basics ■ Do not write information while virus checking software is running, instead wait for it to finish, then disable the virus protection applications, including any software that checks files automatically in the background. ■ Do not use any hard disk utilities, including those that are intended to enhance hard disk drive access speeds, as they may cause unstable operation and damage data. ■ CD-RW (Ultra Speed +) media should not be used as data may be lost or damaged.
Operating Basics ■ Set the computer on a level surface and avoid places subject to vibration such as airplanes, trains or cars. In addition, do not use the computer on an unstable surface such as a stand. ■ Keep mobile phones and other wireless communication devices away from the computer. TOSHIBA Disc Creator Note the following limitations when you use TOSHIBA Disc Creator: ■ DVD-Video cannot be created using TOSHIBA Disc Creator. ■ DVD-Audio cannot be created using TOSHIBA Disc Creator.
Operating Basics ■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs to achieve this you should use Windows Explorer or another similar utility. ■ When you back up a DVD disc, be sure that the source drive supports recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW media - if this is not the case then the source disc might not be backed up correctly.
Operating Basics 3. 4. 5. 6. 7. 8. Click Print Disc Label Label Printing. Ulead Label@Once is started. Click the General tab. Choose DVD Drive for Printer. e.g. PIONEER DVD.... Add and customize the look of your images and text. Click Labelflash setting and choose Draw Quality. Click Print. How to make a DVD-Video Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder: 1.
Operating Basics Important information for use Note the following limitations when you write video DVD: 1. Editing digital video ■ Log in with Administrator rights to use DVD MovieFactory. ■ Make sure that your computer is running on AC power when using DVD MovieFactory ■ Operate the computer at Full Power. Do not use power-saving features. ■ While you are editing DVD, you can display previews. However, if another application is running, the preview might not display properly.
Operating Basics ■ Please verify your disc after recording important data. ■ DVD-R/+R/-RW disc cannot be written in VR format. ■ Not support to output VCD or SVCD format. 3. About Straight to Disc ■ Not support to record on DVD-R/+R disc ■ Not support to record DVD+VR format by HDV ■ HDV support to burn DVD-Video only ■ DVD-VR format not support to add Menu 4. About recorded DVDs ■ Some DVD-ROM drives for personal computers or other DVD players may not be able to read DVD-R/+R/-RW/-RAM discs.
Operating Basics Modem Some models has a built in modem. This section describes how to connect and disconnect the internal modem to and from a telephone jack. The internal modem does not support voice functions. All data and fax functions are supported. ■ In case of a lightning storm, unplug the modem cable from the telephone jack. ■ Do not connect the modem to a digital telephone line. A digital line will damage the modem.
Operating Basics Settings You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. Open the Dialling Properties dialog box after selecting region The dialing properties dialog box will be displayed automatically after you select the region. Location list for region selection A submenu appears displaying location information for telephony.
Operating Basics Connecting To connect the modem cable(optional), follow the steps below. ■ The modular cable that comes with the computer must be used to connect a modem. Connect the end of the modular cable with the core to the computer. ■ In case of a lightning storm, unplug the modem cable from the telephone jack. ■ Do not connect the modem to a digital telephone line. A digital line will damage the modem. 1. Plug one end of the modular cable into the modem jack. 2.
Operating Basics Using the FM tuner The availability of this feature is depending on the model you purchased. 1. Plug the FM tuner antenna into the FM Antenna Jack. FM tuner antenna FM Antenna Jack 2. Select Start All Programs FM Tuner Utility to start FM software. Wireless communications The computer’s wireless communication function supports both Wireless LAN and Bluetooth devices.
Operating Basics Wireless LAN Where present, it supports the A,B, G and draft N standards but it is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with IEEE802.11 Wireless LAN standard. ■ Automatic Transmit Rate Select mechanism in the transmit range of 54, 48, 36, 24, 18, 12, 9 and 6 Mbit/s. (IEEE 802.11a/g) ■ Automatic Transmit Rate Select mechanism in the transmit range of 11, 5.5, 2 and 1 Mbit/s.
Operating Basics 2. Multi User: On Windows Vista™, the use of Bluetooth is not supported in a multiuser environment. This means that, when you use Bluetooth, other users logged onto the same computer will not be able to use its Bluetooth functionality. Product Support: The latest information regarding Operating System support, Language Support or available upgrades can be found on our web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.toshiba.
Operating Basics LAN The computer has built-in support for Fast Ethernet LAN or Giga bit Ehternet LAN (depends on the model you purchased). LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer's default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-TX), be sure to connect with a CAT5 cable or higher.
Operating Basics Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer's LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub. Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer.
Operating Basics ■ Never transport your computer with ExpressCards installed. This could cause damage to your computer and/or ExpressCard, resulting in product failure. ■ Use the carrying case when transporting the computer. ■ When carrying your computer, be sure to hold it securely so that it does not fall or hit anything. ■ Do not carry your computer by holding protruded portions.
The Keyboard Chapter 5 The Keyboard The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are five types of keys: typewriter keys, function keys, soft keys, Windows® special keys, and cursor control keys. Typewriter keys The typewriter keys produce the upper- and lower-case letters, numbers, punctuation marks, and special symbols that appear on the screen.
The Keyboard F1 ... F12 function keys The function keys (not to be confused with Fn) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, keys marked with icons execute specific functions on the computer. Refer to the section, Soft keys: Fn key combinations, in this chapter.
The Keyboard + Power plan: Displays the power save modes and lets you change the power settings. + Sleep: This hot key switches the system to Sleep Mode. + Hibernate:This hot key switches the system to Hibernate mode. + Output: Changes the active display device. Default resolution for simultaneous mode is set to 1024 × 768. If you connect an RGB (Monitor) that is not 1024 × 768 resolution, change it in "Display Properties". + Brightness (decreases): Turns the monitor brightness down.
The Keyboard + TOSHIBA Zooming Utility (reduce): Reduces the icon size on the desktop or the font size within one of the supported application windows. + TOSHIBA Zooming Utility (enlarge): Increases the icon size on the desktop or the font size within one of the supported application windows. Before using Fn + 1 and Fn + 2, you must install the TOSHIBA Zooming Utility.
Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Power and Power-Up Modes Power indicators As shown in the above table, the Battery Power indicators on the system indicator alert you to the computer’s operating capability and battery charge status. Battery indicator Check the Battery indicator to determine the status of the battery pack. The following indicator lights indicate the battery status: Flashing orange The battery charge is low. The AC adaptor must be connected to recharge the battery.
Power and Power-Up Modes Battery types The computer has the following batteries: ■ Battery pack (6cell or 9cell depending on the model.) ■ Real Time Clock (RTC) battery ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Sleep Mode.
Power and Power-Up Modes Real Time Clock battery The Real Time Clock (RTC) battery provides power for the internal real time clock and calendar. It also maintains the system configuration. If the RTC battery becomes completely discharged, the system loses this data and the real time clock and calendar stop working. The computer's RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative.
Power and Power-Up Modes Safety precautions Mishandling of batteries can cause death, serious injury or property damage. Carefully observe the following advisories: Danger: Indicates an imminently hazardous situation, which could result in death or serious injury, if you do not follow instructions. Warning: Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions.
Power and Power-Up Modes Warning 1. Never allow caustic electrolyte fluid leaked from a battery pack to contact your eyes, skin or clothing. If caustic electrolyte fluid should contact your eyes, immediately wash your eyes with large amounts of running water and seek medical attention, to help prevent eye damage. If electrolyte fluid should contact your skin immediately wash it under running water to prevent rash.
Power and Power-Up Modes Note 1. Never remove the battery pack while the Wake-up on LAN function is enabled. Data will be lost. Before you remove a battery pack, disable the Wake-up on LAN function. 2. After the battery pack is charged, avoid leaving the AC adaptor connected and the computer turned off for more than a few hours at a time. Continuing to charge a fully-charged battery pack can damage the battery.
Power and Power-Up Modes Battery charging notice The battery may not charge right away under the following conditions: ■ The battery is extremely hot or cold. If the battery is extremely hot, it might not charge at all. To ensure the battery charges to its full capacity, charge the battery at room temperature of 10° to 30°C (50° to 88°F). ■ The battery is nearly completely discharged. Leave the AC adaptor connected for a few minutes and the battery should begin charging.
Power and Power-Up Modes Maximizing battery operating time A battery’s usefulness depends on how long it can supply power on a single charge. How long the charge lasts in a battery depends on: ■ CPU processing speed (depends on the model you purchased) ■ Screen brightness ■ Cooling method (depends on the model you purchased) ■ System Sleep Mode ■ System Hibernation ■ Monitor power off ■ How often and how long you use the hard disk, optical disc. ■ How much charge the battery contained to begin with.
Power and Power-Up Modes 3. Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the Battery indicator flashes or there is some other warning to indicate a low battery, go to step 4. 4. Connect the AC adaptor to the computer and the power cord to a power outlet. The Battery indicator should glow orange to indicate that the battery pack is being charged.
Power and Power-Up Modes 5. Slide and hold the battery release latch to free the battery pack after moving the battery pack lock into its unlock position - then slide the battery pack out of the computer. Battery Release Latch Battery Pack Lock Battery pack Releasing the battery pack Installing the battery pack To install a battery, follow the steps below. ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of.
Power and Power-Up Modes Starting the computer by password If you have already registered a password, there are two ways to start the computer: ■ Swipe your fingerprint on the sensor if you have already registered the fingerprint with the Fingerprint utility and enabled Fingerprint Poweron Security. If you would not like to swipe your finger or cannot authenticate the fingerprint for some reasons, push the BkSp key to skip the fingerprint authentication screen.
Power and Power-Up Modes Panel power off/on You can set up your computer so that power turns off automatically when you close the display panel. When you open the panel, power turns on in Sleep Mode or Hibernation Mode but not in boot mode. If the panel power off function is enabled and you use Shut down Windows®, do not close the display until the shut down function is completed. System Auto Off This feature turns the system off automatically if it is not used for a set duration.
HW Setup Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Password, Display, Boot Priority, Keyboard, LAN, and USB. Accessing HW Setup To run HW Setup, click , All Programs, TOSHIBA, Utilities, HWSetup. HW Setup Window The HW Setup window contains the following tabs: General, Password, Display, Boot Priority, Keyboard, USB and LAN.
HW Setup User Password Lets you register a new password or un-register an existing password. Not Registered Un-registers an existing password Registered Register a new password by following the on screen instructions Owner String This blank field is used to display a message when the password field is displayed on startup. If a password is not registered the message will not be shown. The maximum length is 256 characters.
HW Setup Disabled Disables the Wake-up on Keyboard function (Default). USB USB Keyboard/Mouse/FDD Legacy Emulation Use this option to enable or disable Legacy USB support. If your operating system does not support USB, you can still use a USB mouse, keyboard, and FDD by setting the Legacy USB Support to enable. USB Sleep and Charge function This section describes the setting for "USB Sleep and Charge function". For more information, please refer to the USB Sleep and Charge function section in Chapter 4.
Optional Devices Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility.
Optional Devices Inserting an ExpressCard One ExpressCard connector is located on the left side of the computer. The computer's hot-install feature lets you install ExpressCard while the computer's power is on. To install an ExpressCard, follow the steps below. 1. Insert the ExpressCard. 2. Press gently to ensure a firm connection. Windows® hot-install feature lets you insert an ExpressCard while the computer’s power is on.
Optional Devices ExpressCard Removing the ExpressCard SD/SDHC/MMC/MEMORY STICK/MEMORY STICK PRO/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MEMORY STICK/MEMORY STICK PRO/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory.
Optional Devices Do not insert Memory Stick Duo/PRO Duo into the slot. Data may be lost or damaged if you use any card other than those supported. The card is designed so that it can be inserted only one way. Do not try to force the card into the slot. For more details on using memory cards, see manuals accompanying the cards. The Logo of SD memory card is The Logo of SDHC memory card is . . Installing a memory card To install a memory card: 1. Insert the memory card. 2.
Optional Devices Removing a memory card To remove a memory card, follow the steps below: 1. Click the Safely Remove Hardware icon on the Taskbar. 2. Select a device, then click the Stop button. A confirmation dialog may appear, depending on how the device is registered with the system; if so, confirm that you want to remove the device. 3. Gently press the memory card inside the socket to eject it. 4. Grasp the card and remove it.
Optional Devices 5. Do not twist or bend memory cards. 6. Do not expose memory cards to liquids or store in humid areas or lay media close to containers of liquid. 7. After using a memory card, return it to its case. 8. Do not touch the metal part or expose it to liquids or let it get dirty. Memory expansion You can install additional memory in the computer's memory module socket to increase the amount of RAM. This section describes how to install and remove a memory module.
Optional Devices Memory Module Cover Removing the memory module cover 6. Lift one side of the insulator sheet and fit the module's connectors into the computer's connectors at about a 45 degree angle. Press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. Slot A is reserved for main memory. Use slot B for expanded memory. If only one card is installed use slot A. 7.
Optional Devices Points to note about memory module error If you install a memory module that is not compatible with the computer, the Power indicator will flash (on for 0.5 seconds, off for 0.5 seconds) in the following ways: ■ If there is only an error in Slot A: repeatedly flashes orange twice, then blue. ■ If there is only an error in Slot B: repeatedly flashes orange, then blue twice. ■ If there is an error in Slot A and in Slot B: repeatedly flashes orange twice, then blue twice.
Optional Devices Latches 1 2 1 Removing the memory module 6. Seat the cover and secure it with screws and replace the battery pack. Additional battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. Refer to Chapter 6, Power and Power-Up Modes.
Optional Devices When you turn on the power, the Windows® Bootup screen (Windows® Logo) appears on the display device. However, the Windows® Desktop appears on a display device that you used last time to shut down your PC, if the display device exists when you turn on the power. To change the display settings, press Fn + F5. If you disconnect the monitor before you turn the computer off, be sure to press Fn + F5 to switch to the internal display.
Optional Devices HDMI (optional) A HDMI monitor can be connected to the HDMI out port on the computer. 1080p, 1080i, 720p, 576p and 480p signal formats can be supported. But actual signal format you can use depends on HDMI monitor. To connect monitor, follow the steps as detailed below: As the port operation of all HDMI (High-Definition Multimedia Interface) monitors has not been confirmed, some HDMI monitors may not function properly. 1.
Optional Devices Settings for audio on HDMI To set the audio device to use the HDMI, follow the steps below. 1. Click Start. 2. Click Control Panel. 3. Click Hardware and Sound. 4. Click Sound. 5. Click Digital Output Device (HDMI). 6. Click the Set Default Device button. To set the audio device to use internal speaker, follow the steps below. 1. Click Start. 2. Click Control Panel. 3. Click Hardware and Sound. 4. Click Sound. 5. Click Speakers. 6. Click the Set Default Device button. i.LINK (IEEE1394) i.
Optional Devices 5. If you connect/disconnect an i.LINK device to/from another i.LINK device that is currently exchanging data with the computer, data frames might be dropped. 6. Make sure data transfer has ended or turn off the computer, before you: a. Connect/disconnect an i.LINK device to/from the computer. b. Connect/disconnect an i.LINK device to/from another i.LINK device that is connected to the computer. Connecting 1. Make sure the connectors are properly aligned and plug the i.
Optional Devices Security lock Security locks enable you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. The computer has a security lock slot on the left side. Attach one end of the cable to a desk and the other end to the security lock slot. 1. Turn the computer so the left side faces you. 2. Align the holes for the security lock and attach the lock.
Troubleshooting Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines: ■ Stop immediately when you recognize a problem exists.
Troubleshooting ■ Inspect all connecting cables for loose wires and all connectors for loose pins. ■ Check that your CD/DVD/CD-RW/HD DVD-R is correctly inserted. Make notes of your observations and keep them in a permanent error log. This will help you describe your problems to your dealer. If a problem recurs, the log will help you identify the problem faster. Analyzing the problem Sometimes the system gives clues that can help you identify why it is malfunctioning.
Troubleshooting Hardware and system checklist This section discusses problems caused by your computer's hardware or attached peripherals.
Troubleshooting Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and a Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems. This section provides checklists for AC power and the battery. If you cannot resolve a problem after following them, the cause could lie with another power resource.
Troubleshooting Battery If you suspect a problem with the battery, check the Battery indicator. For information on indicator and battery operation refer to Chapter 6, Power and Power-Up Modes. Problem Procedure Battery doesn't power the computer The battery may be discharged. Connect the AC adaptor to charge the battery. Battery doesn't charge when the AC adaptor is attached (Battery indicator does not glow orange.) If the battery is completely discharged, it will not begin charging immediately.
Troubleshooting Disposing of PC and PC batteries ■ Discard this PC in accordance with applicable laws and regulations. For further information, contact your local government. ■ This PC contains rechargeable batteries. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under certain applicable laws and regulation, it may be illegal to dispose of old batteries by placing them in the trash. ■ Please be kind to our shared environment.
Troubleshooting After configuring the time and date for the Real Time Clock battery, we recommend that you turn the power status of your computer to "ON" so that the Real Time Clock battery is charged. Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard. Problem Procedure Output to screen is garbled Make sure the software you are using is not remapping the keyboard. Remapping involves reassigning the meaning of each key.
Troubleshooting DVD Super Multi drive (Supporting DVD±R DL) For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a CD/DVD in the drive Make sure the drive's drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated. It should lie flat with the label facing up. A foreign object in the drawer could block laser light from reading the CD/DVD. Make sure there is no obstruction.
Troubleshooting Problem Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. ■ Do not run or start other software during writing. ■ Do not jar the computer during writing. ■ Do not connect/disconnect external devices or install/remove internal cards during writing.
Troubleshooting Problem Procedure Some CD/DVDs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware not configuration matches your software’s needs. Check the CD/DVD’s documentation. Check the type of DVD/CD you are using.
Troubleshooting Problem Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording. Do not run or start other software during writing. Do not jar the computer during writing. Do not connect/disconnect external devices or install/remove internal cards during writing.
Troubleshooting Problem Procedure Some CD/DVD/HD DVD run correctly, but others do not The software or hardware configuration may be causing a problem. Make sure the hardware configuration matches your software’s needs. Check the CD/DVD/HD DVD documentation. Check the type of DVD/CD you are using.
Troubleshooting Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. TouchPad Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to Pad shaped as an hourglass, wait for it to return to its operation normal shape and try again to move it. User’s Manual Double-tapping does not work Try changing the double-click speed setting in the mouse control utility. 1.
Troubleshooting USB mouse Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to mouse shaped as an hourglass, wait for it to resume its operation normal shape and try again to move it. Make sure the mouse is properly connected to the USB port. Double-clicking does not work Try changing the double-click speed setting in the mouse control utility. 1. To access this utility, click , Control Panel, Hardware and Sound, then Mouse icon. 2.
Troubleshooting USB Sleep and Charge function Problem Procedure I cannot use the "USB Sleep and Charge function". The setting of "USB Sleep and Charge function" may be [Disabled]. Change the setting to [Enabled] in the HW Setup. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply may be stopped for safety reasons. When the happens, disconnect an external device if some external devices are connected.
Troubleshooting Problem Procedure External devices connected to the compatible ports do not work when connected to a compatible port. Some external devices may not work when connected to a compatible port when the "USB Sleep and Charge function" is [Enabled] in the HW Setup. Reconnect the external device after turning ON the computer.
Troubleshooting Sound system Refer also to documentation for your audio devices. Problem Procedure No sound is heard Check the software volume settings. Make sure the headphone connection is secure. If problems persist, contact your dealer. Monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation. Problem Procedure Monitor does not turn on Make sure that the external monitor’s power switch is on.
Troubleshooting Problem Procedure Communication is cut off unexpectedly The computer will automatically cut off communication when connection with the carrier is not successful for a set time interval. Try lengthening this time interval. A CONNECT display is Check the error control setting in your quickly replaced by NO communications application. CARRIER You can also use the AT\N command.
Troubleshooting Fingerprint sensor Problem Procedure Reading of the fingerprint was not successful Please try again using the correct posture. Refer to Using the fingerprint sensor (FingerPrint sensor is provided with some models) in Chapter 4, Operating Basics. Try the recognition process again using another enrolled finger. The fingerprint cannot be read due to injuries to the finger Try the recognition process again using another enrolled finger.
Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first. Before contacting TOSHIBA, try the following: ■ Review troubleshooting sections in the documentation for software and peripheral devices.
Specifications Appendix A Specifications This appendix summarizes the computer's technical specifications.
Specifications Communication specifications User’s Manual Communication System Data: Full duplex Fax: Half duplex Communication protocol Data ITU-T-Rec (Former CCITT) Bell Fax: ITU-T-Rec (Former CCITT) V.21/V.22/V.22bis/V.32/ V.32bis/V.34/V.90/V.92 103/212A V.17/V.29/V.27ter/V.21 ch2 Communication Speed Data transmission and reception 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.
Display Controller and Modes Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors. A high-resolution external monitor connected to the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16M colors.
Display Controller and Modes Video Modes The computer supports video modes defined in the table below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on, resolution, number of colors and refresh rates.
Wireless LAN Appendix C Wireless LAN Card Specifications Form Factor Mini PCI TypeIII Compatibility ■ IEEE 802.11 Standard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The "Wi-Fi CERTIFIED" logo is a certification mark of the Wi-Fi Alliance. Network Operating System ■ Microsoft® Windows® Networking Media Access Protocol ■ CSMA/CA (Collision Avoidance) with Acknowledgement (ACK) Data Rate ■ 54/48/36/24/18/12/9/6 Mb/s (IEEE 802.11a/g) ■ 11/5.5/2/1 Mb/s (IEEE 802.
Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
Wireless LAN Supported Frequency Sub-bands Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions. Wireless IEEE 802.11 Channels Sets (Revision B, G and draft N) Frequency Range Channel ID 2400-2483.
AC Power Cord and Connectors Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Voltage rating: 125 or 250 VAC (depending on country/region’s power standards) Certification agencies U.S.
AC Power Cord and Connectors The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia and Europe.
Legal Footnotes Appendix E Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual. Clicking on *XX will display the related description.
Legal Footnotes CPU performance may also vary from specifications due to design configuration. Under some conditions, your computer product may automatically shutdown. This is a normal protective feature designed to reduce the risk of lost data or damage to the product when used outside recommended conditions. To avoid risk of lost data, always make back-up copies of data by periodically storing it on an external storage medium.
Legal Footnotes After going through many charge and discharge cycles, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is a normal phenomenon for all batteries. To purchase a new battery pack, see the accessories information that is shipped with your computer. Hard Disk Drive (HDD) Capacity 1 Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10.
Legal Footnotes Images All images are simulated for purposes of illustration.
If your computer is stolen Appendix F If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office.
If your computer is stolen TOSHIBA Theft Registration Send to: Fax number: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. P300/P300D Series) Model number: (e.g. PSA50 YXT) Serial number: (e.g.
Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
Glossary HDD: hard disk drive HD DVD: High Definition DVD HDCP: high-bandwidth digital content protection HDMI: high definition multimedia interface HDMI-CEC: high definition multimedia interface consumer electronics control IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engineers IMSM: Intel Matrix Storage Manager I/O: input/output IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media
Glossary A AACS: A standard for copy protection that is used for HD DVD. It manages copy and output. adaptor: A device that provides a compatible connection between two units. For example, the computer's internal display adapter receives information from the software and translates it into images on the screen. An adapter can take a number of forms, from a microprocessor to a simple connector: An intelligent adapter (one that is capable of doing some processing) may also be called a controller.
Glossary Bluetooth: A short-range radio technology designed to simplify wireless communication among computers, communication devices and the Internet. board: A circuit board. An internal card containing electronic components, called chips, which perform a specific function or increase the capabilities of the system. boot disk: See system disk. boot: Short for bootstrap. A program that starts or restarts the computer. The program reads instructions from a storage device into the computer's memory.
Glossary CD-RW: A Compact Disc-ReWritable disc can be rewritten many times. See also CD-ROM. character: Any letter, number, punctuation mark, or symbol used by the computer. Also synonymous with byte. chassis: The frame containing the computer. chip: A small semiconductor containing computer logic and circuitry for processing, memory, input/output functions and controlling other chips. click: To press and release the pointing device's primary button without moving the pointing device.
Glossary CPU: Central Processing Unit. The portion of the computer that interprets and executes instructions. CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. D data bits: A data communications parameter controlling the number of bits (binary digits) used to make up a byte.
Glossary documentation: The set of manuals and/or other instructions written for the users of a computer system or application. Computer system documentation typically includes procedural and tutorial information as well as system functions. double click: To press and release the pointing device's primary button rapidly twice without moving the pointing device. In the Windows? operating system, this refers to the pointing device's left button, unless otherwise stated.
Glossary escape: 1) A code (ASCII code 27), signaling the computer that what follows are commands; used with peripheral devices such as printers and modems. 2) A means of aborting the task currently in progress. execute: To interpret and execute an instruction. F fast infrared: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 Mbps. file: A collection of related information; a file can contain data, programs, or both.
Glossary H hard disk drive (HDD): An electromechanical device that reads and writes a hard disk. See also hard disk. hard disk: A storage device composed of a rigid platter or platters that can be magnetically coded with data. Hard disks hold much more information than diskettes and are used for long-term storage of programs and data. The primary (or only) hard disk in a computer is usually fixed, but some computers have secondary hard disks that are removable.
Glossary instruction: Statements or commands that specify how to perform a particular task. interface: 1) Hardware and/or software components of a system used specifically to connect one system or device to another. 2) To physically connect one system or device to another to exchange information. 3) The point of contact between user, the computer, and the program, for example, the keyboard or a menu. interrupt request: A signal that gives a component access to the processor.
Glossary Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewingside coating is etched into character forming segments with leads that extend to the edge of the glass. Applying a voltage between the glass sheets. M main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte. megahertz: A unit of wave frequency that equals 1 million cycles per second. See also hertz.
Glossary N network: A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail. non-system disk: A disk for storing programs and data that cannot be used to start the computer. Compare system disk. nonvolatile memory: Memory that is capable of permanently storing information.
Glossary P parallel: Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time. On your computer, the parallel port provides a parallel communications interface between the computer and an appropriate device. Compare serial. parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1.
Glossary R Radio frequency interference (RFI) shield: A metal shield enclosing the printed circuit boards of the printer or computer to prevent radio and TV interference. All computer equipment generates radio frequency signals. The FCC regulates the amount of signals a computing device can allow past its shielding. A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use.
Glossary serial: Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel. On your computer, the serial port provides a serial interface between the computer and an appropriate device. Compare parallel. SIO: Serial Input/Output. The electronic methodology used in serial data transmission.
Glossary V VGA: Video Graphics Array is an industry standard video adaptor that lets you run any popular software. volatile memory: Random access memory (RAM) that stores information as long as power is supplied to the computer. W warm start: Restarting or resetting a computer without turning it off.
Index Index A E AC adaptor, 1-4 additional, 1-17 connecting, 3-2 ASCII characters, 5-4 Equipment checklist, 1-1 Express card inserting, 8-2 removing, 8-2 Expresscard, 8-1 B Battery charging, 6-7 extending battery life, 6-9 indicator, 6-1 location, 2-5 Monitoring capacity, 6-8 real time clock, 1-4, 6-4 safety precautions, 6-5 save mode, 1-12 types, 6-3 Battery pack, 1-4 additional, 8-9 replacing, 6-10 C Cleaning the computer, 4-37 D Display, 1-9 automatic power off, 1-12 brightness decreases, 5-3 brig
Index K Keyboard, 1-9, 5-1 emulating keys on enhanced, 5-2 F1 ...
Index S Security lock attaching, 8-14 Sleep Mode, 1-13 setting, 3-6 System automatic, 1-12 Soft keys emulating keys on enhanced keyboard, 5-2 ScrLock, 5-2 Sound System, 1-10 Headphone (S/P DIF) jack, 1-10 microphone jack, 1-10 mute hot keys, 5-2 T TOSHIBA ConfigFree, 1-16 TOSHIBA Theft Registration, F-2 Touch Pad, 1-9 location, 2-6 using, 4-1 U USB, 1-9 V Video modes, B-2 Video RAM, 1-4 W Wireless communication switch, 4-35 indicator, 4-35 Wireless LAN, 1-11 using, 4-34 User’s Manual Index-3
