User’s Manual L40 Series computers.toshiba-europe.
L40 Series Copyright © 2007 by TOSHIBA Corporation. All rights reserved. Under copyright law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. TOSHIBA L40 Series Portable Personal Computer User’s Manual First edition May 2007 Ownership and copyright of works including, but not limited to music, video computer programs, databases are protected by copyright laws.
L40 Series EU Declaration of Conformity This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on TOSHIBA’s web site http://epps.toshiba-teg.com on the Internet.
L40 Series CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE APPAREIL A LASER DE CLASSE 1 KLASS 1 LASER APPARAT The drive with the above label is certified by the manufacturer that the drive complies with the requirement for laser product on the date of manufacturing pursuant to article 21 of Code of Federal Regulations by the United States of America, Department of Health & Human Services, Food and Drug Administration.
L40 Series Pioneer DVD Super Multi DVR-K17 ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments, or procedures other than those specified may result in hazardous radiation exposure. ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
L40 Series Hitachi-LG Data Storage, Inc. DVD Super Multi GSA-T20N ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments, or procedures other than those specified may result in hazardous radiation exposure. ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
L40 Series Panasonic CD-RW/DVD-ROM UJDA770 ■ The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments, or procedures other than those specified may result in hazardous radiation exposure. ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
L40 Series Panasonic DVD Super Multi UJ-850U ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments, or procedures other than those specified may result in hazardous radiation exposure. ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
L40 Series International Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the manual carefully and keep it for your future reference. In case of any trouble with this model, contact your nearest AUTHORIZED service center. To prevent direct exposure to the laser beam, do not try to open the enclosure. VORSICHT: Dieses Gerät enthält ein LaserSystem und ist als „LASERSCHUTZKLASSE 1 PRODUKT“ klassifiziert.
L40 Series VORSICHT: DIE VERWENDUNG VON ANDEREN STEURUNGEN ODER EINSTELLUNGEN ODER DAS DURCHFÜHREN VON ANDEREN VORGÄNGEN ALS IN DER BEDIENUNGSANLEITUNG BESCHRIEBEN KÖNNEN GEFÄHRLICHE STRAHLENEXPOSITIONEN ZUR FOLGE HABEN. Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision "CTR21"] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN).
L40 Series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to thecomputer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
L40 Series ■ Do not lay the AC adaptor on a material that is sensitive to heat as the material could become damaged. Pressure or impact damage Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer's components or otherwise cause it to malfunction. PC Card overheating Some PC Cards can become hot during prolonged use which may result in errors or instability in the operation of the device in question.
L40 Series Table of Contents Chapter 1 L40 Series Features Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 Utilities and Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L40 Series Chapter 4 Basic Operations Using the TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Using the internal modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 Using optical disc drives . . . . . . . . . . . . . . . .
L40 Series Chapter 8 Troubleshooting Problem solving process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 Hardware and system checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 TOSHIBA support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14 Chapter 9 Disclaimers CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Memory (Main System) . . . . . . . . . . . . . . .
L40 Series Preface Congratulations on your purchase of the L40 Series computer! This powerful notebook computer provides excellent expansion capability, including multimedia devices. It is designed to provide years of reliable, high-performance computing. This manual gives information on setting up and using your L40 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
L40 Series Chapter 6, Power and Power-Up Modes. This chapter gives details on the computer’s power resources. Chapter 7, Optional Devices. This chapter describes the optional hardware available. Chapter 8, Troubleshooting. This chapter provides probable solutions to problems that you may encounter in using the computer. Chapter 9, Disclaimers. This chapter provides Disclaimer(s) information applicable to the computer. The Appendices provides additional information that you may use as reference.
L40 Series Display ABC Names of windows or icons or text generated by the computer that appears on its display screen is presented in the type face you see to the left. Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. WARNING/CAUTION: Information to prevent injury to yourself, or to prevent damage to components when trying to complete a task. NOTE: Instructions that you MUST follow to complete a task.
L40 Series ■ Ulead DVD MovieFactory® for TOSHIBA ■ TOSHIBA SD Memory Utilities ■ Online Manual The system may not function properly if you use drivers that are not preinstalled or distributed by TOSHIBA. SD Memory Card Format Utility and other SD functions are packaged into TOSHIBA SD Memory Utilities. When uninstalling the SD utilities, click Start Control Panel Uninstall a program, and select TOSHIBA SD Memory Utilities.
L40 Series Features Chapter 1 L40 Series Features This chapter identifies the computer’s special features, options, and accessories. Basic features are described in a separate pamphlet. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Features For the configuration details on your purchased model, visit your region’s TOSHIBA website.
L40 Series Features Main Memory The graphics system in your computer may use part of the main system memory for graphics performance and may reduce the amount of system memory available for other computing activities. The amount of system memory allocated to support graphics may vary depending on the graphics system, applications utilized, system memory size and other factors.
L40 Series Features Disclaimer (Battery Life) For more information on the Disclaimer about Battery Life, refer to the Disclaimers section in Chapter 9. RTC Battery The computer has an internal battery to back up its Real Time Clock (RTC), calendar, and setup information. This battery will last for at least one month without external power source. AC adapter The universal AC adapter provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord.
L40 Series Features Disclaimer (Graphics Processor Unit ("GPU") For more information on the Disclaimer regarding Graphic Processor Unit ("GPU"), refer to the Disclaimers section in Chapter 9. Disks Fixed hard disk Depending on the model purchased, one of the following drives will be installed: 40.0 billion bytes (37.25GB) 60.0 billion bytes (55.88GB) 80.0 billion bytes (74.51GB) 100.0 billion bytes (93.13GB) 120.0 billion bytes (111.76GB) 160.0 billion bytes (149.01GB) 200.0 billion bytes (186.26GB) 9.
L40 Series Features DVD Super Multi drive Some models are equipped with a full-size DVD with double layer disc Super Multi drive module with double layer recording support support that lets you record data to rewritable CD/ DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adapter. It reads DVD-ROMs at maximum 8 speed and CDROMs at maximum 24 speed.
L40 Series Features Ports External monitor 15-pin analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus The computer has 3 Universal Serial Bus (USB) ports that comply with the USB 2.0 standard, which enables data transfer speeds more than 40 times faster than USB 1.1 (which this computer also supports). Multimedia Sound system The integrated Windows compatible sound system provides support for internal speakers as well as jacks for external microphones and headphones.
L40 Series Features Security Power-on password protection Two level password architecture Security Lock Slot Receives an optional security lock in order to anchor the computer to a desk or other large, heavy object. Special features User’s Manual Hotkeys Key combinations that let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
L40 Series Features Panel Power Off/On This feature turns off the computer when the display panel is closed and turns it back on when the panel is opened. You can specify the setting in the Power Options. Low Battery Automatic Hibernation When battery power is exhausted to the point that computer operation cannot be continued, the system automatically enters Hibernation Mode and shuts itself down. You can specify the setting in the Power Options.
L40 Series Features TOSHIBA ConfigFree This is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks. To start ConfigFree, click Start All Programs TOSHIBA Networking ConfigFree.
L40 Series Features Options You can add a number of options to make your computer even more powerful and convenient to use. The following options are available: Memory Modules Two memory module can be installed in this computer. Use only PC5300* compatible DDRII memory modules. See your TOSHIBA dealer for details. * The availability of DDRII depends on the model you purchased. User’s Manual Battery Pack An additional battery pack can be purchased from your TOSHIBA dealer.
The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
The Grand Tour Battery LED The Battery LED indicates the battery’s current charge/discharge status. It lights green when the battery is fully charged. It lights amber while the battery is being charged from the AC adapter. It flashes amber when the battery capacity is low. Hard Disk Drive LED The Hard Disk Drive LED indicates that the hard disk drive is being accessed.
The Grand Tour Multiple Digital Media The Multiple Digital Media Card Slot Access LED Card Slot Access LED illuminates when the card in the slot is in use. Multiple Digital Media The Multiple Digital Media Card Slot allows you to Card Slot use media cards from digital still cameras and other various forms of portable information equipment. The green LED near the media card reader connector flashes when the system accesses the media card.
The Grand Tour Back side The following figure shows the computer’s back panel. 1 1. 2. 3. RGB (Monitor) Port USB Ports LAN Jack 2 3 4 4. 5. 6. 5 6 Modem Jack* DC-In 19V Jack Fan vents * The availability of this feature is dependent on the model you purchased. RGB Monitor Port This 15-pin port lets you connect an external video display to the computer. Universal Serial Bus (USB) Port The Universal Serial Bus (USB 2.0 and 1.
The Grand Tour Underside The following figure shows the computer’s underside. 4 3 2 1 1. 2. User’s Manual Battery Pack Battery Pack Lock 3. 4. Battery Pack Latch Expansion Memory Socket Battery Pack The battery pack powers the computer when the AC adapter is not connected. For detailed information on the battery pack, refer to Chapter 6, Power and Power-Up Modes.
The Grand Tour Front with the display open The following figure shows the front of the computer with the display open. To open the display, push the latch on the front of the display and lift it up. Position the display at a comfortable viewing angle. 1 2 3 4 6 5 7 1. 2. 3. 4. Display Screen Keyboard Status Indicators Power Button Keyboard Display Screen 5. 6. 7.
The Grand Tour Keyboard The keyboard provides full-sized keys with comfortable travel (depth at which the keys can be depressed) and palm rest for both hands. Two Windows function keys are provided in the Windows operating system. TouchPad The TouchPad pointing device is located in the center of the palm rest and is used to control the on-screen pointer. Refer to the Using the TouchPad section in Chapter 4: Basic Operations.
The Grand Tour Region codes for DVD drives and media The disc drive and its media are manufactured according to the specifications of six marketing regions. When you purchase DVD-Video, make sure it matches your drive, otherwise it will not play properly.
The Grand Tour DVD Super Multi drive with double layer disc recording support The full-size DVD super multi drive module lets you record data to rewritable discs as well as run either 12cm (4.72") or 8cm (3.15") discs without using an adapter. The read speed is slower at the center of a disc and faster at the other edge.
The Grand Tour Use ONLY the AC Adapter supplied with the computer’s package or an AC adapter certified by TOSHIBA. Using the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.
Getting Started Chapter 3 Getting Started Before you attempt to use your computer, make sure to read the Instruction Manual for Safety and Comfort included in the package. The Instruction Manual for Safety and Comfort provides you with instructions to safely and fully use your computer. This chapter provides basic information to get you started using your computer.
Getting Started Use ONLY the AC Adapter supplied with the computer’s package or an AC adapter certified by TOSHIBA. Using the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. 1. Connect the power cord to the AC adapter. 2. Connect the DC output plug on the AC adapter to the DC IN input port on the back of the computer. 3. Plug the power cord into a live wall outlet.
Getting Started Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Starting up for the first time in this chapter. 1.
Getting Started Turning off the power The power can be turned off in either of these three modes: Shutdown (Boot) Mode, Hibernation Mode, or Sleep Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data will be saved and the computer will boot to the operating system’s main screen the next time it is turned on. 1. If you have entered data, either save it to the hard disk, drive or to other storage media. 2.
Getting Started ■ When the AC adapter is connected, the computer will go into Sleep Mode according to the settings in the Power Options. ■ To restore the operation from the computer from Sleep Mode, press the power button or press any key. ■ If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.
Getting Started 3. Press the power button. This feature must be enabled. To enable it, click Start Control Panel System and Maintenance Power Options Choose what the power button do. When you turn the power back on, you can continue where you left when you shutdown the computer. ■ When the computer is in Sleep Mode, the power indicator will blink orange.
Getting Started Starting Hibernation Mode You can also enable Hibernation Mode by pressing Fn + F4. Refer to Chapter 5, The Keyboard for more details. To enter Hibernation Mode, follow the steps below. 1. Click Start then click the arrow button ( ) in the power management buttons ( ). 2. Select Hibernate from the menu. Automatic Hibernation Mode The computer can be configured to enter Hibernate Mode automatically when you press the power button or close the lid.
Getting Started Restarting the computer You may need to restart your computer in such cases as: changes in computer settings, and system errors. There are three (3) ways to restart the computer. You can do either of the following steps: ■ Click Start then click the arrow button ( ) in the power management buttons ( ) and select Restart from the menu. ■ Press Ctrl + Alt + Del to display the menu window, then select Restart from the Shutdown options.
Getting Started Restoring the preinstalled software from the Product Recovery disc If preinstalled files are damaged, use the Product Recovery disc to restore them. To restore the operating system and all preinstalled software, follow the steps below. When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. You can not use System Recovery Options if restoring the pre-installed software without System Recovery options. 1.
Basic Operations Chapter 4 Basic Operations This chapter gives information on basic operations including using the TouchPad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal. Using the TouchPad To use the TouchPad, simply move your finger tip across it in the direction you want the on-screen pointer to go. 2 1 1. TouchPad Control Buttons 2.
Basic Operations You can customize pointing device actions in Mouse Properties. Open the Control Panel, select the Mouse icon and press Enter to open the Mouse Properties window. Click: Click the left control button or tap the TouchPad once. Double-click: Click the left control button twice or tap the TouchPad twice. Scroll Vertical: Move your finger up or down the right edge of the TouchPad. Horizontal: Move your finger left or right along the bottom edge of the TouchPad.
Basic Operations Region selection Telecommunication regulations vary from one country/region to another, so you will need to make sure the internal modem’s settings are correct for the country/region in which it will be used. 1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA Networking. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
Basic Operations Settings You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region The dialing properties dialog box will be displayed automatically after you select the region. Location list for region selection A submenu appears displaying location information for telephony.
Basic Operations Connecting To connect the internal modem cable, follow the steps below. ■ In case of a lightning storm, unplug the modem cable from the telephone jack. ■ Do not connect the modem to a digital telephone line. A digital line will damage the modem. 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a telephone jack. Do not pull on the cable or move the computer while the cable is connected.
Basic Operations LAN The computer is equipped with networking hardware that supports Ethernet LAN (10 megabits per second, 10BASE-T), and Fast Ethernet LAN (100 megabits per second). Do not install or remove an optional memory module while the Wake-up on LAN feature is enabled. The Wake-up on LAN feature does not work on battery power, you should always leave the computer connected to the AC adapter if you are using this feature.
Basic Operations Disconnecting the LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub. Wireless LAN The wireless LAN is compatible with other LAN systems that comply with the IEEE 802.11 b/g / 802.11 a/b/g wireless LAN standards.
Basic Operations Wireless communication switch You can enable or disable the wireless LAN function with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch forward to turn it on and backward to turn it off. Turn the switch off in airplanes and hospitals. Check the LED, it stops glowing when the wireless communication function is off. Wireless communication LED The LED indicates the status of the wireless communication functions.
Basic Operations Loading optical disc media To load a disc, follow the steps below. 1. Turn on the power. 2. a. Press the eject button to open the drawer slightly. b. Pressing the eject button will not open the drawer when the computer’s power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Basic Operations 3. Grasp the drawer gently and pull until it is fully open. 4. Lay the disc, label side up, in the drawer. Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 5. Press gently at the center of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with its base.
Basic Operations 6. Push the center of the drawer to close it. Press gently until it locks in place. If the disc is not seated properly when the drawer is closed, it might be damaged. Also, the drawer might not open fully when you press the eject button. Removing compact discs To remove the disc, follow the steps below. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical disc indicator to go out before you open the drawer.
Basic Operations 3. Push the center of the drawer to close it. Press gently until it locks into place. Writing CDs on a CD-RW/DVD-ROM drive You can use the CD-RW/DVD-ROM drive to write data to CD-R/RW discs. This application for writing is preinstalled: TOSHIBA Disc Creator. Important message Before you write or rewrite to CD-R/RW media, read and follow all setup and operating instructions in this section.
Basic Operations Before writing or rewriting Observe the following points when you write or rewrite the data. ■ We recommend the following manufacturers of CD-R and CD-RW media. Media quality can affect write or rewrite success rates. CD-R discs can be written only once. CD-RW discs can be rewritten many times. CD-R TAIYOYUDEN CO., LTD. MITSUBISHI KAGAKU MEDIA CO., LTD. RICOH Co., Ltd. Hitachi Maxell Ltd. CD-RW and High speed CD-RW MITSUBISHI KAGAKU MEDIA CO., LTD. RICOH Co., Ltd.
Basic Operations When writing or rewriting Observe/consider the following when you write or rewrite to a CD-R/RW, DVD-R/-RW/-RAM or DVD+R/+RW disc. ■ Do not perform any of the following actions when writing or rewriting: ■ Change users in the Windows Vista™ operating system. ■ Operate the computer for any other function, including using a mouse or TouchPad or closing/opening the LCD panel. ■ Start a communication application such as a modem. ■ Apply impact or vibration to the computer.
Basic Operations Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may be caused by writing or rewriting with this product. ■ Any change or loss of the recorded contents of CD-R/RW or DVD-R/ -RW/+R/+RW/-RAM media that may be caused by writing or rewriting with this product, or for any business profit loss or business interruption that may be caused by the change or loss of the recorded contents.
Basic Operations DVD+RW MITSUBISHI KAGAKU MEDIA CO., LTD. RICOH Co., Ltd. *DVD-RAM DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2 Matsushita Electric Industrial Co., Ltd. Hitachi Maxell Ltd. DVD+R (Double Layer) MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-R (Dual Layer) MITSUBISHI KAGAKU MEDIA CO., LTD. ■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it.
Basic Operations ■ When multiple drives that can write data to discs are connected, be careful not to write to the wrong drive. ■ Be sure to connect the universal AC adapter before you write or rewrite. ■ Before you enter Sleep/Hibernation Mode, be sure to finish DVD-RAM writing. Writing is finished if you can eject DVD-RAM media. ■ Be sure to close all other software programs except the writing software. ■ Do not run software such as a screen saver, which can put a heavy load on the CPU.
Basic Operations ■ Always copy data from the hard disk drive to the CD. Do not use cut and paste as the original data will be lost if there is a write error. When Using Ulead DVD MovieFactory® for TOSHIBA How to make a DVD-Video Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder: 1. Click Start All Programs DVD MovieFactory for TOSHIBA Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Insert a DVD-RW or DVD+RW disc in Burner. 3.
Basic Operations Important information for use Note the following limitations when you write video DVD: 1. Editing digital video ■ Log in with Administrator rights to use DVD MovieFactory. ■ Make sure that your computer is running on AC power when using DVD MovieFactory ■ Operate the computer at Full Power. Do not use power-saving features. ■ While you are editing DVD, you can display previews. However, if another application is running, the preview might not display properly.
Basic Operations ■ ■ ■ 4. ■ Not support to record DVD+VR format by HDV HDV support to burn DVD-Video only DVD-VR format not support to add Menu About recorded DVDs Some DVD-ROM drives for personal computers or other DVD players may not be able to read DVD-R/+R/-RW/-RAM discs. ■ When playing your recorded disc on your computer, please use the WinDVD software application. ■ If you use an over-used rewritable disc, the full formatting might be locked. Use a brand new disc.
Basic Operations ■ When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW, be sure to use the same type of disc. ■ You cannot partially delete any data written to a CD-RW, DVD-RW or DVD+RW disc. Data Verification To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data CD/DVD. 1. Display the setting dialog box by one of the following two steps: ■ Click the setting button ( ) for writing on the main toolbar in the Data CD/DVD mode.
Basic Operations 4. Do not place heavy objects on your discs. 5. Do not eat, smoke, or use erasers near your discs. Foreign particles inside the disk’s jacket can damage the magnetic surface. 6. Magnetic energy can destroy data on discs. Keep your discs away from speakers, radios, television sets and other sources of magnetic fields. Setting up more than one display You can set up your computer to utilize more than one display, effectively spreading a single desktop screen across two monitors.
Basic Operations Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again. ■ Clean the computer using a slightly damp (with water) cloth. You can use glass cleaner on the display.
The Keyboard Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 104/105-key enhanced keyboard. By pressing some keys in combination, all the 104/105-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available.
The Keyboard F1 ... F12 function keys The function keys, not to be confused with Fn, are the 12 keys at the top of your keyboard. These keys are dark gray, but function differently from the other dark gray keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, keys marked with icons execute specific functions on the computer. See the section, Soft keys: Fn key combinations, in this chapter.
The Keyboard Hotkeys Fn + ESC Mute – Turns the volume on and off. Fn + F1 Lock – Enters "Lock computer" mode. To restore your desktop, you need to log on again. Fn + F2 Power Plan Mode – Displays the power save modes and lets you change the power settings Fn + F3 Sleep – This hot key switches the system to Sleep mode. Fn + F4 Hibernate – This hot key switches the system to Hibernate mode. Fn + F5 Output – Changes displays. Default resolution for simultaneous mode is set to WXGA (1280 × 800).
The Keyboard Keypad overlay Your computer’s keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the center of the keyboard with white letters make up the numeric keypad overlay. The overlay provides the same functions as the numeric keypad. Turning on the overlays The numeric keypad overlay can be used for numeric data input or cursor and page control. Numeric mode To turn on the Numeric mode, press Fn + F11 (Numeric mode indicator lights).
The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold down Fn and press any other key. All keys will operate as if the overlay were off. 2. Type upper-case characters by holding down Fn + Shift and pressing a character key. 3. Release Fn to continue using the overlay.
Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Power and Power-Up Modes Power indicator Check the DC IN indicator to determine the power status with the AC adapter connected: Green The power button will glow green while power is being supplied and the computer is turned on. The power indicator on the front of computer will glow green when the computer is switched on. Blinking amber Indicates power is being supplied to the computer while the computer is in Sleep mode. No light Under any other conditions, the indicator does not light.
Power and Power-Up Modes Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance. Safety precautions Mishandling of batteries can cause death, serious injury or property damage.
Power and Power-Up Modes 8. DO NOT expose the battery pack to abnormal shock, vibration or pressure. The battery pack’s internal protective device will fail, causing it to overheat, explode, ignite or leak caustic liquids possibly resulting in death or serious injury. 9. DO NOT let a battery pack to become wet. A wet battery pack will overheat, ignite or explode, possibly resulting in death or serious injury. Warning 1.
Power and Power-Up Modes 6. Be sure to monitor the remaining battery power. If the battery pack or real time clock battery discharge completely, Sleep Mode will not function, data in memory will be lost, and the computer might register an incorrect time and date. In this case, connect the AC adapter to recharge the batteries. 7. DO NOT install or remove the battery pack without first turning off the power and disconnecting the AC adapter.
Power and Power-Up Modes Time The following table shows the time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack about 12 or longer about 4 or longer RTC battery about 24 about 24 with AC or Battery pack The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer.
Power and Power-Up Modes Leaving the AC adapter connected will shorten battery life. At least once a week, run the computer on battery power until the battery is fully discharged, then recharge the battery. Monitoring battery capacity Remaining battery power can be monitored using the following methods.
Power and Power-Up Modes ■ The condition of the battery terminals. Make sure the battery terminals stay clean by wiping them with a clean dry cloth before installing the battery pack. Retaining data with power off (sleep mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery Approximately 1.5 days (Sleep mode, 4-cell) Approximately 2.0 days (Sleep mode, 6-cell) Approximately 1.
Power and Power-Up Modes 5. Unlock the Battery Pack Lock. 1 6. Slide the battery pack latch to the left, then pull the battery out of the battery bay. 3 2 Installing the battery pack To install a battery pack, follow the steps below. The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1.
Power and Power-Up Modes 3. Hold the battery pack so that the label faces down and the connectors on the battery face the connectors on the computer. 4. Put the battery into the battery bay until the latch clicks into place.
Optional Devices Chapter 7 Optional Devices Optional devices can expand the computer’s capabilities and its versatility.
Optional Devices 3. Check the configuration in the HW Setup window to make sure it is appropriate for your card. Removing an Express Card To remove the Express Card, follow the steps below. 1. In Windows Vista™, open the Safely Remove Hardware icon on the system tray and disable the Express Card. 2. Press the Express Card slightly to make it stretch out. 3. Grasp the Express Card and pull it out from the slot.
Optional Devices SD/SDHC/MMC/MS/MS Pro/xD Memory card The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory. Card Type Capacities SD 8MB to 2GB SDHC 4GB to 8GB MMC 8MB to 2GB MS 8MB to 256MB MS Pro 256MB to 2GB xD 16MB to 2GB Keep foreign objects out of the memory card slot.
Optional Devices Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Be sure the memory card is oriented properly before you insert it. If Windows fails to read the card, remove then reinsert it. The multiple digital media card slot only accepts one type of card at a time. Do not attempt to install more than one card as you risk damaging either the cards themselves or the computer.
Optional Devices 4. Grasp the card and remove it. ■ Make sure the memory card indicator is out before you remove the card or turn off the computer’s power. If you remove the card or turn off the power while the computer is accessing the card you may lose data or damage the card. ■ Do not remove the card while the computer is in Sleep or Hibernation mode. The computer could become unstable or data in the memory card could be lost.
Optional Devices Memory expansion You can install additional memory module in the computer’s main or second memory module socket to increase the amount of memory. This section describes how to install and remove a memory module. ■ Before you install or remove a memory module, turn off the computer with the Shut Down option in the Windows Start menu. If you install or remove a memory module while the computer is in Sleep or Hibernation mode, data will be lost.
Optional Devices External monitor An external analog monitor can be connected to the external monitor port on the computer. To connect a monitor, follow the steps below. 1. Turn the computer off. 2. Connect the monitor to the external monitor port. 3. Turn the monitor's power on. 4. Turn the computer on. When you turn on the power, the computer automatically recognizes the monitor. To change the display settings, press Fn + F5.
Troubleshooting Chapter 8 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help you to determine the cause. Problem solving process ■ Stop immediately when you recognize that a problem exists. Further action may result in data loss or damage. You may destroy valuable problem related information that can help solve the problem. ■ Observe what is happening.
Troubleshooting ■ Check that the optical disc drive is correctly inserted. Make notes of your observations and keep them in a permanent error log. This will help you describe your problems to your dealer. If a problem recurs, the log will help you identify the problem faster. Analyzing the problem Sometimes the system gives clues that can help you identify why it is malfunctioning.
Troubleshooting Hardware and system checklist This section discusses problems caused by your computer’s hardware or attached peripherals.
Troubleshooting This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system based around how the Boot Priority option is set within the computer’s BIOS setup. If any of the following conditions are present, the self test failed: ■ The computer stops and does not proceed to display information or messages except the TOSHIBA logo. ■ Random characters appear on the screen, and the system does not function normally.
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. Problem Procedure Some letter keys produce numbers. Check that the numeric keypad overlay is not selected. Press Fn + F11 and try typing again. Output to screen is garbled. Make sure the software you are using is not remapping the keyboard. Remapping involves reassigning the meaning of each key. See your software’s documentation. If you are still unable to use the keyboard, consult your dealer.
Troubleshooting Problem Procedure Battery does not power Check the power consumption settings in the the computer as long as Power Options. Consider using a power saving expected. mode. Hard disk drive Problem Procedure Computer does not boot Insert a system disk and reboot. from hard drive. There may be a problem with your operating system files. Refer to your operating system documentation. Slow performance Your files may be fragmented.
Troubleshooting Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. Problem Procedure Cannot access Wireless Make sure the computer’s wireless LAN communication switch is set to on. Use the Config Free program that comes preinstalled in your computer to see LAN status. If the problem persists, consult your LAN administrator. PC Card Problem Procedure PC Card error occurs Reset the PC Card to make sure it is firmly connected.
Troubleshooting Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. If appropriate, make sure the headphone connection is secure. Check Windows Device Manager and ensure the sound function is enabled and that settings for I/O address, interrupt level and DMA are correct for your software and do not conflict with other hardware devices that you have connected to the computer.
Troubleshooting USB Refer also to your USB device’s documentation. Problem Procedure USB device does not work Check for a firm cable connection between the USB ports on the computer and the USB device. Make sure the USB device drivers are properly installed. Refer to your Windows documentation for information on checking the drivers. If problems persist, contact your dealer. USB mouse Problem Procedure On-screen pointer does The system might be busy.
Troubleshooting Memory expansion Problem Procedure The computer hangs up and issues beep sounds. (A long beep, three short beeps, three short beeps, and then a long beep.) Make sure the memory module installed in the expansion slot is compatible with the computer. If an incompatible module has been installed, follow the steps below. 1. Turn off the power. 2. Disconnect the AC adapter and all peripheral devices. 3. Remove the battery pack. 4. Remove the memory module. 5.
Troubleshooting Problem Procedure A CONNECT display is quickly replaced by Check the error control setting in your communications application. NO CARRIER In data transmission, make sure the parity bit and Character display becomes garbled during stop bit settings correspond with those of the remote computer. a communication Check the flow control and communication protocol. You cannot receive an incoming call Check the "rings before auto answer" setting in your communications application.
Troubleshooting Problem Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. ■ Do not run or start other software during writing. ■ Do not jar the computer during writing. ■ Do not connect/ disconnect external devices or install/remove internal cards during writing.
Troubleshooting Problem Procedure Some discs run correctly, but others do not The software or hardware configuration may be causing a problem. Make sure the hardware configuration matches your software’s needs. Check the disc’s documentation. Check the type of disc you are using.
Troubleshooting Real Time Clock Problem Procedure The following message The RTC battery charge has become exhausted, is displayed on the LCD: you should set the date and time in within the BIOS setup screen through the following steps: RTC battery is 1. Press [F1] key. BIOS setup will boot up. low or CMOS checksum is 2. Press [F2] to set the date in [System Date]. inconsistent. 3. Press [F2] to set the time in [System Time]. Press [F2] key to set Date/ Time.
Disclaimers Chapter 9 Disclaimers This chapter states the Disclaimer(s) information applicable to TOSHIBA computers. CPU Central Processing Unit ("CPU") Performance Disclaimer.
Disclaimers Memory (Main System) Part of the main system memory may be used by the graphics system for graphics performance and therefore reduce the amount of main system memory available for other computing activities. The amount of main system memory allocated to support graphics may vary depending on the graphics system, applications utilized, system memory size and other factors.
Disclaimers Graphics Processor Unit ("GPU") Graphics processor unit ("GPU") performance may vary depending on product model, design configuration, applications, power management settings and features utilized. GPU performance is only optimized when operating in AC power mode and may decrease considerably when operating in battery power mode.
Specifications Appendix A Specifications This appendix contains the Notebook PC’s technical specifications. Dimensions 365mm 269.5mm 35.
Specifications Weight Starting at 2.75kg* * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected. Environmental Requirements Characteristics Temperature Specifications Operating 5°C to 35°C Altitude (from sea level) -30 to 10,000 feet Humidity Non-operating -20°C to 65°C -30 to 40,000 feet 20% to 80% Built-in Modem Some computers in this series are equipped with Modem functionality.
Specifications User’s Manual Communication Speed Data transmission and reception 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/ 31200/33600 bps Data reception only with V.90/V.92 28000/29333/30666/32000/33333/34666/ 36000/37333/38666/40000/41333/42666/ 44000/45333/46666/48000/49333/50666/ 52000/53333/54666/ 56000 bps Fax: 2400/4800/7200/9600/12000/14400 bps Error correcting MNP class 4 and ITU-T V.42 Data compression MNP class 5 and ITU-T V.
Display Modes Appendix B Display Modes This appendix contains a table listing all the display modes when the display. is set to an external monitor. If you are running some applications (for example a 3D application or video playback and so on), you may see some disturbance, flickering or frame dropping on your screen. If that occurs, adjust the resolution of display, lowering it until the screen is displayed properly. You could also disable Windows Aero™. to help correct this situation.
AC Power Cord and Connectors Appendix C AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Voltage rating: 125 or 250 VAC (depending on country/region's power standards) Certification agencies U.S.
AC Power Cord and Connectors For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U. S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U. S. A. and Canada, the United Kingdom, Australia and Europe.
If your computer is stolen Appendix D If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office.
If your computer is stolen TOSHIBA Theft Registration Send to: Fax number: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. L40 Series) Model number: (e.g. PSA30 YXT) Serial number: (e.g.
Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
Glossary ROM: read only memory RTC: real time clock SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array WXGA: wide extended graphics array A adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
Glossary C cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time. The computer has two cache levels. Level one is incorporated into the processor and level two resides in external memory.
Glossary CPU: Central Processing Unit. The portion of the computer that interprets and executes instructions. CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. D DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries.
Glossary F floppy disk: A removable disk that stores magnetically encoded data. floppy disk drive (FDD): An electromechanical device that reads and writes to floppy disks. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
Glossary K K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte. L Light Emitting Diode (LED): A semiconductor device that emits light when a current is applied. Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewingside coating is etched into character forming segments with leadsthat extend to the edge of the glass.
Glossary O operating system: A group of programs that controls the basic operation of a computer. Operating system functions include interpreting programs, creating data files, and controlling the transmission and receipt (input/output) of data to and from memory and peripheral devices. output: The results of a computer operation. Output commonly indicates data. 1) printed on paper, 2) displayed at a terminal, 3) sent through the serial port of internal modem, or 4) stored on some magnetic media.
Glossary S SCSI: Small Computer System Interface is an industry standard interface for connection of a variety of peripheral devices. soft key: Key combinations that emulate keys on the IBM keyboard, change some configuration options, stop program execution, and access the numeric keypad overlay. stop bit: One or more bits of a byte that follow the transmitted character or group codes in asynchronous serial communications. system disk: A disk that has been formatted with an operating system.