User’s Manual A80 User’s Manual TOSHIBA A80 *PMR300062EN0* PMR300062EN0 TOSHIBA A80 TOSHIBA A80 TOSHIBA A80 TOSHIBA A80 TOSHIBA A80 TOSHIBA A80 TOSHIBA A80 Choose freedom. computers.toshiba-europe.com 䍯癥爠䄸〠偍刳〰〶㉅丰 䵯湴慧Ⱐㄳ⸠䑥穥浢敲′〰㐠ㄴ㨴㘺㈱ Choose freedom. computers.toshiba-europe.
Copyright © 2005 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. TOSHIBA Toshiba A80 Series Portable Personal Computer User's Manual First edition Jan. 2005 Ownership and copyright of music, video computer programs, databases, etc. are protected by the copyright laws.
TruSurround XT, TruBass, Dialog Clarity, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is in corporated under license from SRS Labs, Inc. Macrovision License of Notice This product incorporates copyright protection technology that is protected by methods and claims of certain U.S. patents and other intellectual rights owned by Macrovision Corporation, and other rights owners.
■ Before you connect the computer to a power source, ensure that the voltage rating of the AC adapter matches that of the available power source. 115 V/60Hz in most of North and south America and some Far Eastern countries such as Taiwan. 100 V/50Hz in eastern Japan and 100 V/60Hz in western Japan. 230 V/50 Hz in most of Europe, the Middle East, and the Far East.
■ Before you clean your computer, turn if off, unplug it from its power source, and remove the battery. ■ Handle components with care. Hold a component such as a memory module by its edges, not its pins.
Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's or expansion unit's external monitor port, USB port and microphone jack.
Cet appareil numérique de la class B respecte toutes les exgences du Règlement sur le matériel brouilleur du Canada. BSMI Notice (Taiwan BSMI Notice (Taiwan Only)Only) ᤞ; ृشࠌܫ ຍਢԬᣊऱᇷಛขΔڇၲ࣋ऱᛩቼխࠌشழΔױ౨ᄎທྤګᒵሽեឫΔڇ ຍጟൣݮՀΔࠌृشᄎޣආ࠷ਬࠄᔞᅝऱኙΘ Optical Disc Drive Safety Instruction ■ Be sure to check the international precautions at the end of this section. The optical drive that is used in this computer is equipped with laser.
Manufacturer Type Matsushita DVD Super Multi UJ-830B Matsushita DVD Super Multi UJ-831B TEAC CD-ROM CD-224E TEAC CD-RW/DVD-ROM DW-224E TEAC DVD Super Multi DV-W28E Pioneer DVD Dual DVR-K15TBT International precautions ■ This drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station." To prevent direct exposure to the laser beam, do not try to open the enclosure. VORSICHT: Dieses Gerät enthält ein LaserSystem und ist als "LASERSCHUTZKLASSE 1 PRODUKT" klassifiziert.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER'S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. VORSICHT: DIE VERWENDUNG VON ANDEREN STEURUNGEN ODER EINSTELLUNGEN ODER DAS DURCHFÜHREN VON ANDEREN VORGÄNGEN ALS IN DER BEDIENUNGSANLEITUNG BESCHRIEBEN KÖNNEN GEFÄHRLICHE STRAHLENEXPOSITIONEN ZUR FOLGE HABEN.
The hookflash (timed break register recall) function is subject to separate national type approvals. It has not been tested for conformity to national type regulations, and no guarantee of successful operation of that specific function on specific national networks can be given. Japan regulations Region selection If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select the Japan country mode.
Type of service Your modem is designed to be used on standard-device telephone lines. Connection to telephone company-provided coin service (central office implemented systems) is prohibited. Connection to party lines service is subject to state tariffs. If you have any questions about your telephone line, such as how many pieces of equipment you can connect to it, the telephone company will provide this information upon request.
Instructions for IC CS-03 certified equipment 1. NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user's satisfaction.
Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been designed to specifically configure to ensure compliance with Austel standards when the country/region selection is set to Australia. The use of other country/region setting while the modem is attached to the Australian PSTN would result in your modem being operated in a noncompliant manner.
Notes for use of this device in New Zealand ■ The grant of a Telepermit for a device in no way indicates Telecom acceptance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which this modem is capable of operating depend on a specific network implementation which is only one of many ways of delivering high quality voice telephony to customers. Failure to operate should not be reported as a fault to Telecom.
■ The preferred method of dialing is to use DTMF tones (ATDT...) as this is faster and more reliable than pulse (decadic) dialing. If for some reason you must use decadic dialing, your communications program must be set up to record numbers using the following translation table as this modem does not implement the New Zealand "Reverse Dialing" standard.
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual. Stress injury Carefully read the Safety Instruction Manual.
LCD Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode. Screen will dim when the computer is operated on battery power and you may not be able to increase the brightness of the screen.
Hard Disk Drive Capacity 1 Gigabyte (GB) means 1000 x 1000 x 1000 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 1024 x 1024 x 1024 = 1,073,741,824 bytes, and therefore may show less storage capacity.
CE compliance This product and the original options are designed to observe the related EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected / implemented those options / cables have to provide assurance that the system (PC plus options / cables) still fulfils the required standards.
Network connection (Class A warning) If this product has networking capabilities and will be connected to a network, Class A radiation limits will be observed (in accordance with technical conventions). This means that if the product will be used in a domestic environment, other devices in the near surrounding area may suffer interference. Consequently, please do not use this product in such environments (for example a living room), otherwise you could be held responsible for any ensuing interference.
Limitation of Liability For damage occurring due to an earthquake or thunder, fire beyond our responsibility, action by third party, other accident, intentional or accidental mistakes by a user, misuse, use under abnormal conditions, we do not take any responsibility. For incidental damage (loss of business profit, business interruption, etc.) occurring due to use or disability of the product, we do not take any responsibility.
Warning Turn OFF the Wireless Communication switch of Wireless Products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles. Turn OFF the Wireless communication switch inside a medical facility or near medical electric equipment. Do not bring medical electric equipment close to the product.
Toshiba A80 Table of Contents Preface Manual contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxi Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxxii Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxii Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxii Keys. . . . . . . . . . . . . . . . . . . . . . . .
DVD Super Multi drive supporting Double Layer . . . . . . . . . . . . . . . 2-13 DVD Super Multi drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 DVD-ROM drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 Chapter 3: Getting Started Setting up your work space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 General conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using optical media drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 Loading compact discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 Removing compact discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 CD/DVD play control buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Express Media Player . .
Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Windows special keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Keypad overlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Turning on the overlays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Temporarily using normal keyboard (overlay on). . . . . . . . . . . . . . . .
Removing memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8 Additional battery pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Additional AC adaptor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 External monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 Television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 i.
Appendix A: Specifications Appendix B: Display Modes Appendix C: AC Power Cord and Connectors Appendix D: If your computer is stolen Glossary Toshiba A80 xxix
Toshiba A80 Preface Congratulations on your purchase of the Toshiba A80 computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your Toshiba A80 computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
Preface Manual contents This manual has nine chapters, four appendixes and a glossary. Here is a brief introduction to preview the details of each chapter. Chapter 1, Toshiba A80 Features, is an overview of the computer's special features, utilities and options. Chapter 2, The Grand Tour, identifies the components of the computer and briefly explains how they function.
Preface Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary. Icons Icons identify ports, dials, and other parts of your computer.
Preface Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read. A note is a hint or advice that helps you make best use of your equipment.
Preface Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
Preface Documentation ■ ■ ■ ■ TOSHIBA A80 Series User's Manual TOSHIBA A80 Quickstart Safety Instruction Manual Warranty information Backup Media and Addtional Software ■ Product Recovery Disc ■ Additional Software CD * ■ Express Media Player Recovery CD * * indicates an optional part that is dependant on the model purchased. If any of the items are missing or damaged, contact your dealer immediately.
Toshiba A80 Chapter 1 Toshiba A80 Features This chapter provides the information of computer's features, utilities, and options. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA.
Toshiba A80 Features Memory Slot Two SODIMM with 256MB/512MB/1GB Max. upgrade to 2GB with 2 SODIMM sockets L2 Cache 1MB L2 Cache (Intel® Celeron® M Processor) 2MB L2 Cache (Intel® Pentium® M Processor) Video Controller Depending on the model you purchased: Intel: Mobile Intel® 915GM Express Chipset Mobile Intel® 910GML Express Chipset up to 128MB. ATI: MOBILITYTM RADEON® X600 with 64MB or 128MB MOBILITYTM RADEON® X300 with 32MB, 64MB, or 128MB.
Toshiba A80 Features Power Battery Pack 12-cell Li-Ion smart battery pack with 10.8V*8600mAh capacity or 6-cell Li-Ion smart battery pack with 10.8V*4300mAh capacity (depending on the models) Approximately 12 hours or longer charging time to 100% battery capacity (system on). Approximately 4 hours charge time to 100% battery capacity (system off) Approximately 2 days discharge time in standby mode for 12-cell battery and 1 days for 6-cell battery. Discharge time in shutdown mode is approximately 1 month.
Toshiba A80 Features Display 15.0" TFT screen with a resolution of 1600 horizontal x1200 vertical pixels UXGA 15.0" TFT screen with a resolution of 1400 horizontal x1050 vertical pixels SXGA+ 15.0" TFT screen with a resolution of 1024 horizontal x768 vertical pixels XGA 15.0" TFT screen with a resolution of 1024 horizontal x768 vertical pixels XGA (CSV) 15.0" TFT screen with a resolution of 1024 horizontal x768 vertical pixels XGA (HCSV) 14.
Toshiba A80 Features Disks Toshiba A80 Fixed hard disk Either one 30.0 billion bytes (27.94GB) 40.0 billion bytes (37.26GB) 60.0 billion bytes (55.88GB) 80.0 billion bytes (74.52GB) 100.0 billion bytes (93.16GB) 120.0 billion bytes (111.78 GB) Bus Master IDE 9.5m/m 2.5" HDD Support Ultra DMA 100 CD-RW/DVD-ROM drive Some models are equipped with a full- size CD-RW/DVD-ROM module that lets you record data to rewritable CD/CD-RWs as well as run either 12 cm (4.72") or 8 cm (3.
Toshiba A80 Features Toshiba A80 DVD±R/±RW (DVD Dual) drive supporting Double Layer Some models are equipped with a full- size DVD Dual module that lets you record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CDROMs at maximum 24 speed.
Toshiba A80 Features DVD Super Multi drive Some models are equipped with a full- size DVD Dual module that lets you record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CDROMs at maximum 24 speed. It writes CD-R at up to 24 speed, CD-RW at up to 10 speed, DVD-R at maximum 8 speed, DVD-RW at maximum 4 speed, DVD+R at maximum 8 speed, and DVD+RW at maximum 4 speed.
Toshiba A80 Features Ports (depending on configuration) Parallel This port is used to connect a parallel printer or other parallel device. External monitor 15-pin analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus The computer provides Universal Serial Bus (USB) ports that comply with the USB 2.0 standard, which enables data transfer speeds more than 40 times faster than USB 1.1 (which this computer also supports.
Toshiba A80 Features Communications (depending on configuration) Modem An internal modem provides capability for data and fax communication. It supports V.90 or V.92 depending on the region. The speed of data transfer and fax depends on analog telephone line conditions. It has a modem jack for connecting to a telephone line. Both of V.90 and V.92 are supported only in USA, Canada, Australia, UK, France and Germany. Only V.90 is available in other regions.
Toshiba A80 Features Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Toshiba A80 Hotkeys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
Toshiba A80 Features Low Battery Automatic Hibernation When battery power is exhausted to the point that computer operation cannot be continued, the system automatically enters Hibernation and shuts down. You can specify the setting in the TOSHIBA Power Saver utility. Hibernation This feature lets you turn off the power without exiting from your software. The contents of main memory are saved to the hard disk. When you turn on the power again, you can continue working right where you left off.
Toshiba A80 Features Utilities This section describes pre-installed utilities (depending on the configuration) and tells how to start them. For details on operations, refer to each utility's online manual, help files or readme files. Toshiba A80 TOSHIBA Power Saver There are two ways to display the Windows XP Control Panel. The default is Category View. TOSHIBA Power Saver utility is under the Performance and Maintenance item.
Toshiba A80 Features Toshiba A80 DLA for TOSHIBA DLA (Drive Letter Access) is the packet writing software which provides the function which writes files and/or folders to DVD+RW, DVD-RW or CD-RW disc via a drive letter like a floppy disk or other removable disks. TOSHIBA Touch and Launch TOSHIBA Touch and Launch is a tool that allows you to perform various tasks easily using Touch Pad. It is useful in the following conditions. – To open a file located on the desktop whose icon is obscured by a window.
Toshiba A80 Features Options You can add a number of options to make your computer even more powerful and convenient to use. The following options are available: Memory Modules Two memory modules can be installed in the computer The computer comes with at least one memory module pre-installed. Use only PC2700 compatible DDR memory modules. See your TOSHIBA dealer for details Toshiba A80 Battery Pack An additional battery pack can be purchased from your TOSHIBA dealer.
Toshiba A80 Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
The Grand Tour Off On Toshiba A80 DC-In LED The DC-IN LED indicates the computer is connected to the AC adapter and it is plugged into an AC power source. Power LED The Power LED flashes amber while the system is in Standby mode. The LED turns off when the computer is turned off or in Hibernation mode. In normal operating mode, the LED is blue. Battery LED The Battery LED indicates the battery's current charge/discharge status. It lights blue when the battery is fully charged.
The Grand Tour Left side The following figure shows the computer left side 1 2 1. PARALLEL PORT * 2. S-VIDEO PORT 3. FAN VENT 4. PC CARD SLOT 3 4 5 6 7 5. MULTIPLE DIGITAL MEDIA CARD SLOT * 6. MULTIPLE DIGITAL MEDIA CARD SLOT ACCESS LED * 7. I.LINK PORT * * available depending on the model you purchased The left side of the computer Parallel Port This Centronics-compatible 25-pin parallel port is used to connect a parallel printer or other parallel device.
The Grand Tour Toshiba A80 Multiple Digital Media Card Slot Access LED The Multiple Digital Media Card Slot Access LED lights up when the Multiple Digital Media Card is accessed. (This function is available depending on the model you purchased.) i.LINK (IEEE1394) Port Connect an external device, such as a digital video camera to this port for high-speed data transfer. This only applies the i.LINK model of the computer. (This function is available depending on the model you purchased.
The Grand Tour Right side The following figure shows the computer right side 1 2 3 1. UNIVERSAL SERIAL BUS (USB) PORTS 2. OPTICAL MEDIA DRIVE 3. UNIVERSAL SERIAL BUS (USB) PORT OR SERIAL PORT * * available depending on the model you purchased. Some model have no port The right side of the computer Toshiba A80 Universal Serial Bus (USB) Ports The Universal Serial Bus (USB 2.0 and 1.1) port enables USB-equipped devices (such as keyboards, mice, hard drives, scanners, and printers).
The Grand Tour Back side The following figure shows the computer back panel. 1 2 4 3 5 1. SECURITY LOCK 2. MODEM JACK * 3. LAN JACK * 4. RGB (MONITOR) PORT 5. DC IN 15V JACK * available depending on the model you purchased. The back side of the computer Toshiba A80 Security Lock A security cabel attaches to this port. The optional security cable anchors your computer to a desk or other large object to deter theft.
The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. 4 5 1 2 3 1 2 1. BATTERY PACK 2. BATTERY PACK LOCK 3. BATTERY PACK RELEASE LATCH 4. EXPANSION MEMORY SOCKET 5. FAN VENT The underside of the computer Battery Pack This is the battery pack, which powers the computer when the AC adaptor is not connected. For detailed information on the battery pack, refer to Chapter 6, Power System.
The Grand Tour Front with the display open The following figure shows the front of the computer with the display open. To open the display, slide the display latch on the front of the display and lift up. Position the display at a comfortable viewing angle. 10 2 3 4 5 6 7 1 8 9 1. POWER BUTTON 2. INTERNET BUTTON * 3. CD/DVD BUTTON * 4. PLAY/PAUSE * 5. STOP * 6. PREVIOUS/FAST REWIND * 7. NEXT/FAST FORWARD * 8. TOUCHPAD 9. TOUCHPAD CONTROL BUTTONS 10.
The Grand Tour CD/DVD Button Pressing this button in the power-off condition will run Express Media Player. Once Express Media Player is launched, the Power indicator turns on and the audio buttons are enabled. When Express Media Playeris running, pressing CD/DVD button will do nothing. Pressing CD/DVD button in the power-on or standby conditions will launch Windows Media Player/WinDVD. (Express Media Player is available depending on the model you purchased.
The Grand Tour Display Screen The LCD displays high-contrast text and graphics at up to 2048x1536 pixel. Refer to Appendix B. When the computer operates on the AC adaptor the display screen's image will be brighter than when it operates on battery power. The brightness level is intended to save battery power. To prolong the life of your display screen, use a screen saver when you're not working the computer.
The Grand Tour Keyboard Indicators ARROW MODE NUMERIC MODE CAPS LOCK Arrow Mode When the Arrow mode icon lights, you can use the keypad overlay (light gray labeled keys) as cursor keys. Refer to the Keypad Overlay section in Chapter 5, The TouchPad and Keyboard. Numeric Mode You can use the keypad overlay (light gray labeled keys) for numeric input when the Numeric mode icon lights up. Refer to the Keypad Overlay section in Chapter 5, The TouchPad and Keyboard.
The Grand Tour 5 Russia, Indian Subcontinent, Africa, North Korea, Mongolia 6 China Writable discs This section describes the types of writable CD/DVD discs. Check the specifications for your drive to for the type of discs it can write. Use Record Now! to write compact discs. Refer to Chapter 4, Operating Basics. CDs ■ CD-R discs can be written only once. The recorded data cannot be erased or changed. ■ CD-RW discs can be recorded more than once.
The Grand Tour DVD±R/±RW (DVD Dual) drive supporting Double Layer The full- size DVD±R/±RW drive module lets you record data to rewritable CD/ DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the other edge.
The Grand Tour DVD Super Multi drive The full-size DVD super multi drive module lets you record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the other edge.
The Grand Tour AC adaptor The AC adaptor converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any country/region. To recharge the battery, simply connect the AC adaptor to a power source and the computer. See Chapter 6, Power System, for details. The AC adaptor Use of the wrong adaptor could damage your computer.
Toshiba A80 Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space – for your health and safety ■ ■ ■ ■ ■ ■ ■ Connecting the AC adaptor Opening the display Turning on the power Starting up for the first time Turning off the power Restarting the computer Restoring the preinstalled software from the Product recovery disc.
Getting Started General conditions In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment. ■ TOSHIBA Power SaverMake sure there is adequate space around the computer for proper ventilation. ■ Make sure the AC power cord connects to an outlet that is close to the computer and easily accessible.
Getting Started Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. BELOW EYE LEVEL 90°ANGLES FOOT REST Posture and positioning of the computer ■ Place your chair so that the keyboard is at or slightly below the level of your elbow. You should be able to type comfortably with your shoulders relaxed. ■ Your knees should be slightly higher than your hips.
Getting Started Work habits A key to avoiding discomfort or injury from repetitive strain is to vary your activities. If possible, schedule a variety of tasks into your work day. If you must spend long periods at the computer, finding ways to break up the routine can reduce stress and improve your efficiency. ■ Sit in a relaxed posture. Good positioning of your chair and equipment as described earlier can reduce tension in your shoulders or neck and ease back strain. ■ Vary your posture frequently.
Getting Started Connecting the AC adaptor Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power. The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery pack, refer to Chapter 6, Power System.
Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer to the right to unlatch the display panel. Opening the display 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. Turning on the power This section describes how to turn on the power.
Getting Started Turning on the power Starting up for the first time When you first turn on the power, the computer's initial screen is the Microsoft® Windows XP Startup Screen Logo. Follow the on-screen directions for each screen. During setup, you can click the Back button to return to the previous screen. Be sure to read the Windows End User License Agreement display carefully.
Getting Started Make sure the Built-in Hard Disk Drive and optical media drive are off. If you turn off the power while a disk is being accessed, you can lose data or damage the disk. 3. Click start and click Turn Off Computer. From the Turn Off Computer window click Turn Off. 4. Turn off the power to any peripheral devices. Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.
Getting Started To enter Hibernation mode, follow the steps below. 1. Click Start. 2. Select Turn Off Computer. 3. Open the Turn Off Computer dialog box. Hibernate is not displayed. 4. Press the Shift key. The Standby item will change to Hibernate. 5. Select Hibernate. Automatic Hibernation The computer will enter Hibernate mode automatically when you press the power button or close the lid. First, however, make the appropriate settings according to the steps below. 1. Open the Control Panel. 2.
Getting Started Standby mode In standby mode the power remains on, but the CPU and all other devices are in sleep mode. ■ If the computer is not used or accessed in any way, including receipt of e-mail, for 15 or 30 minutes when the AC adaptor is connected, the computer will automatically enter Standby mode (TOSHIBA Power Saver default). ■ To restore operation, press the power button.
Getting Started You can enter standby mode in one of three ways: 1. Click start, click Turn Off Computer and click Stand by. 2. Close the display panel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel. Open Performance and Maintenance and open TOSHIBA Power Saver. 3. Press the power button. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel.
Getting Started Restoring the preinstalled software from the backup media If preinstalled files are damaged, use the supplied backup media to restore them. To restore the operating system and all preinstalled software, follow the steps below. Use the Express Media Player Recovery CD first to restore the Express Media Player and then the Product Recovery media next for restoring the Windows Operating system.
Getting Started 3. Use the cursor keys to select the CD/DVD drive in the Boot menu. For details, refer to the Boot Priority section in Chapter 7, HW Setup. 4. Follow the on-screen instructions. 5. If your computer came with additional software installed, this software can not be recovered from the Product Recovery disk. Re-install these applications (e.g. Works Suite, DVD Player, Games, etc.) separately from other media.
Toshiba A80 Chapter 4 Operating Basics This chapter gives information on using the TouchPad, internal modem, LAN, wireless LAN, optical media drives, and TV-Out function. It also provides tips on caring for your computer and on heat dispersal. Using the TouchPad To use the TouchPad, simply move your finger tip across it in the direction you want the on-screen pointer to go. 2 1 1. TOUCH PAD CONTROL BUTTONS 2.
Operating Basics You can customize pointing device actions in Mouse Properties. Open the Control Panel, select the Mouse icon and press Enter to open the Mouse Properties window. Click Click the left control button or tap the TouchPad one time. Double-click Click the left control button twice or tap the TouchPad twice. Scroll Vertical: Move your finger up or down the right edge of the TouchPad. Horizontal: Move your finger left or right along the bottom edge of the TouchPad.
Operating Basics Region selection Telecommunication regulations vary from one country/region to another, so you will need to make sure the internal modem's settings are correct for the country/region in which it will be used. 1. Point to "All Programs", point to "TOSHIBA", point to "Networking" and click "Modem Region Select". Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
Operating Basics Setting You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region. Location list for region selection. A submenu appears displaying location information for telephony.
Operating Basics Connecting To connect the internal modem cable, follow the steps below. ■ In case of a lightning storm, unplug the modem cable from the telephone jack. ■ Do not connect the modem to a digital telephone line. A digital line will damage the modem. 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a telephone jack Connecting the internal modem Do not pull on the cable or move the computer while the cable is connected.
Operating Basics LAN The computer is equipped with LAN circuits that support Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX), or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T) (depending on the model yor purchased). This section describes how to connect/disconnect to a LAN. Do not install or remove an optional memory module while Wake-up on LAN is enabled. Wake-up on LAN does not work without the AC adaptor.
Operating Basics Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer's LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub. Wireless LAN The wireless LAN is compatible with other LAN systems that comply with the IEEE 802.11a+g or 802.11g wireless LAN standards.
Operating Basics Wireless communication switch You can enable or disable wireless LAN function, with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch forward to turn it on and backward to turn it off. Turn the switch off in airplanes and hospitals. Check the LED. It stops glowing when the wireless communication function is off. Wireless communication LED The LED indicates the status of the wireless communication functions.
Operating Basics Loading compact discs To load a DVD/CD, follow the steps below. 1. Turn on the power. 2. a. Press the eject button to open the drawer slightly. EJECT BUTTON Pressing the eject button b. Pressing the eject button will not open the drawer when the computer's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Operating Basics 4. Lay the DVD/CD, label side up, in the drawer. Inserting a DVD/CD Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 5. Press gently at the center of the DVD/CD until you feel it click into place. The DVD/CD should lie below the top of the spindle, flush with its base. 6. Push the center of the drawer to close it. Press gently until it locks in place. If the DVD/CD is not seated properly when the drawer is closed, it might be damaged.
Operating Basics Removing compact discs To remove the DVD/CD, follow the steps below. Do not press the eject button while the computer is accessing the DVD drive. Wait for the Diskette/Optical Media indicator to go out before you open the drawer. Also, if the disc is spinning when you open it, wait for it to stop before you remove it. 1. To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened.
Operating Basics Buttons For the Internet button and CD/DVD buttons functions can de assigned in the TOSHIBA Controls Properties. CD/DVD play control buttons In addition to the power button, the following buttons control functions of the optical media drive and Digital Audio Data are available depending on the model purchased. Play/Pause Press the button to begin or pause play. Stop Press the button to stop play. Previous Press the button to advance to the previous track, chapter or data.
Operating Basics Express Media Player Express Media Player is availble depending on the model you purchased Express Media Player is a quick play feature that enables users to perform DVD and CD playback without using Windows. Press F1 once or twice to show the pop up guide for Express Media Player. This guide is only available when the Express Media Player is running. Press F2 to display the settings menu.
Operating Basics Writing CDs on a CD-RW/DVD-ROM drive You can use the CD-RW/DVD-ROM drive to write data to CD-R/RW discs. The following applications for writing are preinstalled: Record Now!/DLA, licensed by Sonic Solutions. Important message Before you write or rewrite to CD-R/RW disc, read and follow all setup and operating instructions in this section. If you fail to do so, the CD-RW/DVDROM drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage.
Operating Basics TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used. ■ Be sure to connect the universal AC adaptor when you write or rewrite. ■ Be sure to close all other software programs except the writing software.
Operating Basics Writing CD/DVDs on a DVD±R/±RW drive supporting Double Layer You can use the DVD±R/±RW drive to write data to either CD-R/RW or DVDR/-RW/+R/+RW discs. The following applications for writing are preinstalled: Record Now!/DLA, licensed by Sonic Solutions. InterVideo WinDVD Creator 2 Platinum, which is a product of InterVideo, Inc. Important message Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW disc, read and follow all setup and operating instructions in this section.
Operating Basics DVD-R: DVD-RW: DVD Specifications for Recordable Disc for General Version 2.0 TAIYOYUDEN CO., LTD. PIONEER VIDEO CORPORATION MITSUBISHI CHEMICAL CORPORATION DVD Specifications for Re-recordable Disc for Version 1.0 or Version 1.1, Version 1.2 VICTOR COMPANY OF JAPAN, LIMITED TDK Corporation DVD+R: MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. DVD+RW: MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd.
Operating Basics ■ Be sure to close all other software programs except the writing software. ■ Do not run software such as a screen saver, which can put a heavy load on the CPU. ■ Operate the computer in the full-power mode. Do not use power-saving features. ■ Do not write while virus check software is running. Wait for it to finish, then disable virus detection programs including any software that checks files automatically in the background.
Operating Basics Writing CD/DVDs on a DVD Super Multi drive and a DVD Super Multi drive supporting Double Layer You can use the DVD Super Multi drive to write data to either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are preinstalled: Record Now!/DLA, licensed by Sonic Solutions. InterVideo WinDVD Creator 2 Platinum, which is a product of InterVideo, Inc.
Operating Basics CD-R: TAIYOYUDEN CO., LTD. MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. Hitachi Maxell Ltd. CD-RW: MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. DVD-R: DVD Specifications for Recordable Disc for General Version 2.0 TAIYOYUDEN CO., LTD. PIONEER VIDEO CORPORATION MITSUBISHI CHEMICAL CORPORATION DVD-RW: DVD Specifications for Re-recordable Disc for Version 1.0 or Version 1.1, Version 1.
Operating Basics ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ cannot be recovered. Check the content of the disc carefully before you delete it. If multiple drives that can write data to discs are connected, be careful not to delete data from the wrong drive. In writing to a DVD-R/+R/-RW/+RW disc, some disc space is required for file management, so you may not be able to write the full capacity of the disc.
Operating Basics ■ Install, remove or connect external drives, including the following: PC card, USB devices, external display, i.LINK devices, optical digital devices. ■ Use the Audio/Video control button to reproduce music or voice. ■ Open the CD-RW/DVD-ROM, DVD-R/-RW,DVD+-R/+-RW, or DVD Super Multi drive. ■ Do not use shut down/log off and Standby/Hibernation while writing or rewriting. ■ Make sure writing or rewriting is completed before going into standby/ hibernation.
Operating Basics ■ RecordNow! does not support recording to DVD-RAM discs. To record to a DVD-RAM, use Explorer or other utility. ■ When you back up a DVD disc, be sure the source drive supports recording to DVD-R/-RW or DVD+R/+RW discs. If the source drive does not support recording to DVD-R/-RW or DVD+R/+RW discs, it might not be backed up correctly. ■ When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW, be sure to use the same type of disc.
Operating Basics Installing InterVideo WinDVD Creator Platinum To install the InterVideo WinDVD Creator, you must logon with administrator rights. Before you install InterVideo WinDVD Creator, close all programs. 1. Insert the Additional Software CD-ROM that contains WinDVD Creator Platinum into your optical disk drive. 2. Follow the installation instructions that appear on the screen. 3. When the installation is complete, restart your computer when prompted for the changes to take effect.
Operating Basics 6. Put a blank DVD-R/+R disc or an erased DVD-RW/+RW disc in the drive. 7. Click [Start] to record to the disc. 8. When recording is finished, the tray opens. Important information for use Note the following limitations when you write video DVD: 1. Editing digital video ■ Log in with Administrator rights to use WinDVD Creator. ■ Make sure that your computer is running on AC power when using WinDVD Creator. ■ Operate the computer at Full Power. Do not use power-saving features.
Operating Basics ■ Please verify your disc after recording important data. ■ DVD-R/+R/-RW disc cannot be written in VR format. ■ WinDVD Creator cannot export to DVD-Audio, VideoCD, miniDVD format. ■ WinDVD Creator can write DVD-RAM/+RW in VR format, but the disc may only play on your computer. ■ When writing to DVD disc, WinDVD Creator requires 2GB or more over disk space every one hour of video. ■ When you make a fully recorded DVD, the chapter sequence may not play correctly. 3.
Operating Basics CD/ DVD. If necessary, use a cloth dampened in water or a neutral cleaner. Do not use benzine, thinner or similar cleaner. Diskettes 1. Store your diskettes in the container they came in to protect them and keep them clean. If a diskette is dirty, do not use cleaning fluid. Clean it with a soft damp cloth. 2. Do not slide back the diskette's protective metal covering or touch the diskette's magnetic surface. Fingerprints may prevent the diskette drive from reading data from the diskette.
Operating Basics Setting up more than one display You can set up your computer to utilize more than one display, effectively spreading a single desktop screen across two monitors. The Display Properties window allows you to adjust more precisely the relative positioning of the two displays when they are configured as an extended desktop. On the Display Properties window, the two displays can be positioned horizontally, vertically or in any diagonal configuration you wish, as shown below.
Operating Basics Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again. ■ Clean the computer using a slightly damp (with water) cloth. You can use glass cleaner on the display.
Toshiba A80 Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/102key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are five types of keys: typewriter keys, keypad overlay, function keys, soft keys and cursor control keys.
The Keyboard F1 ... F12 function keys The function keys, not to be confused with Fn, are the 12 keys at the top of your keyboard. These keys are dark gray, but function differently from the other dark gray keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, keys marked with icons execute specific functions on the computer. See the section, Soft keys: Fn key combinations, in this chapter.
The Keyboard Press Fn + Enter to simulate Enter on the enhanced keyboard's numeric keypad. Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key. Hotkeys Fn + ESC Volume Mute Turns the volume on and off. Fn + F1 Instant Security Enters screen saver mode and blanks the screen. To restore your desktop, press any key or use the TouchPad.
The Keyboard Fn + F11 Numeric Keypad On/Off This hot key enables/ disables the embedded numeric keypad. Numeric lock state is logically enabled. Fn + F12 Scroll Lock On/Off Fn + Space Change Resolution Cycles sequentially from the current resolution to 800x600 to 1024x768 and back again to the original resolution. . Fn + 1 Fn + 2 TOSHIBA Zooming Utility (reduce): To reduce the icon size on the desktop or the application window, press 1 key while holding down the Fn key.
The Keyboard Arrow mode To turn on the Arrow mode, press Fn + F10 (Arrow mode indicator lights). Now try cursor and page control using the keys below. Press Fn + F10 again to turn off the overlay. Numeric mode To turn on the Numeric mode, press Fn + F11 (Numeric mode indicator lights). Now try numeric data entry using the keys below. Press Fn + F11 again to turn off the overlay. The numeric keypad overlay (U.S.
The Keyboard Temporarily using overlay (overlay off) While using the normal keyboard, you can temporarily use the keypad overlay without turning it on: 1. Press and hold down Fn. 2. Check the keyboard indicators. Pressing Fn turns on the most recently used overlay. If the Numeric mode indicator lights, you can use the overlay for numeric entry. If the Arrow mode indicator lights, you can use it for cursor and page control. 3. Release Fn to return to normal keyboard operation.
Toshiba A80 Chapter 6 Power System The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Power System Power on AC adaptor not connected Battery charge is above low battery trigger point • Operates • LED: Battery off DC IN off Battery charge is below low battery trigger point • Operates • Alarm sounds (depending on the TOSHIBA Power Saver utility setting) • LED: Battery flashes amber DC IN off Battery charge exhausted Computer goes into Hibernation or shuts down No battery installed • No operation • LED: Battery off DC IN off Power off (no operation) (depending on the TOSHIBA Power Sa
Power System DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected: Blue Indicates the AC adaptor is connected and supplying proper power to the computer. No light Indicates the AC adaptor is not connected. Power indicator Check the Power indicator to determine the power status with the AC adaptor connected: Blue The power button will shinning blue while power is being supplied to the computer and the computer is turned on.
Power System Real Time Clock battery The Real Time Clock (RTC) battery provides power for the internal real time clock and calendar. It also maintains the system configuration. If the RTC battery becomes completely discharged, the system loses this data and the real time clock and calendar stop working. The following message appears when you turn on the power: S ERROR 0271:Check date and time settings. WARNING 0251:System CMOS checksum bad - Default configuration used.
Power System Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance. Safety precautions Mishandling of batteries can cause death, serious injury or property damage.
Power System 8. Never expose the battery pack to abnormal shock, vibration or pressure. The battery pack's internal protective device will fail, causing it to overheat, explode, ignite or leak caustic liquids possibly resulting in death or serious injury. 9. Never let a battery pack become wet. A wet battery pack will overheat, ignite or rupture possibly resulting in death or serious injury. Warning 1. Never allow caustic electrolyte fluid leaked from a battery pack to contact your eyes, skin or clothing.
Power System 6. Be sure to monitor the remaining battery power. If the battery pack and real time clock battery discharge completely, Standby and Suspend will not function and data in memory will be lost. Also, the computer might register an incorrect time and date. In this case, connect the AC adaptor to recharge the batteries. 7. Never install or remove the battery pack without first turning off the power and disconnecting the AC adaptor.
Power System Charging time (hours) Battery type Power on Power off Battery pack about 12 or longer about 4 or longer RTC battery about 24 about 24 with AC or Battery pack The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer. If you make heavy use of external devices, for example, the battery might scarcely charge at all during operation. Refer also to the section Maximizing battery operating time.
Power System Monitoring battery capacity Remaining battery power can be monitored by the TOSHIBA Power Saver utility. ■ Wait for a moment after turning on the computer before trying to monitor the remaining operating time. The computer needs this time to check the battery's remaining capacity. ■ With repeated discharges and recharges, the battery's capacity will gradually decrease. Therefore, an often used, older battery will not operate for as long as a new battery even when both are fully charged.
Power System Retaining data with power off (standby mode) When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods: Battery Approximately 2 days (Standby mode, 12-cell) Approximately 1 days (Standby mode, 6-cell) Approximately 1 month (Shut down mode, both) RTC battery Approximately 1 month Extending battery life To maximize the life of your battery pack: ■ If you have extra battery packs, rotate their use.
Power System 1 1 2 Battery Removing the battery pack-1 1 2 2 3 Battery Removing the battery pack-2 For environmental reasons, do not throw away a spent battery pack. Please return spent battery packs to your TOSHIBA dealer.
Power System Installing the battery pack To install a battery pack, follow the steps below. The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer. 3.
Power System Panel power off/on In AC mode, this feature turns power to the computer off when the display panel is closed and turns it back on when the panel is opened. In Battery mode, the Hibernation feature turns power to the computer off when the display panel is closed and cannot turn it back on when the panel is opened. The Standby feature turns power to the computer off when the display panel is closed and turns it back on when the panel is opened.
Toshiba A80 Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Display, Boot Priority, Keyboard, CPU, LAN, and USB. Some models are not equipped with Parallel/Printer tab and/or CPU tab. Accessing HW Setup To run HW Setup, click Start, click Control Panel, click Printers and Other Hardware and select TOSHIBA HW Setup.
HW Setup Setup This field displays BIOS Version and date. Password This tab allows you to set or reset the user password for power on. Parallel/Printer Some models are equipped with a Parallel/Printer tab. This tab lets you set the Parallel Port Mode. Use the Windows Device Manager to make settings for the Parallel port. Parallel Port Mode The options in this tab are ECP and Standard Bi-directional. ECP Sets the port type to Extended Capabilities Port (ECP).
HW Setup CPU This function lets you set the CPU operating mode. It is displayed in Pentium-M model only. Dynamic CPU Frequency Mode This option lets you choose from the following settings: Dynamically Switchable CPU power consumption and clock speed automatic switching function is enabled. When the computer is in use, CPU operation is automatically switched when necessary (Default). Always Low CPU power consumption and clock speed automatic switching function is disabled.
HW Setup 2nd HDD -> Built-in HDD The computer will look for the 2nd hard disk drive first, next the Built-in hard disk drive, and then the hard disk drive. If a boot command is not found on the first detected hard disk drive, the system will not boot from the other hard disk drive. It will search the next device in the boot priority for a boot command. Some modules may not be displayed.
HW Setup Built-in LAN This feature enables or disables the Built-in LAN. Toshiba A80 Enabled Enables Built-in LAN function (Default). Disabled Disables Built-in LAN function.
Toshiba A80 Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility.
Optional Devices PC cards The computer is equipped with a PC card expansion slot that can accommodate one 5 mm Type II card. Any PC card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC cards, including PC card 16's multifunction card and CardBus PC cards. CardBus supports the new standard of 32-bit PC cards. The bus provides superior performance for the greater demands of multimedia data transmission.
Optional Devices Removing a PC card 1. 2. 3. 4. 5. Click the Safety Remove Hardware icon on the Task Bar. Click the PC card you want to remove. Press the eject button of the PC card to extend it. Press the extended eject button to pop the card out slightly. Grasp the PC card and remove it.
Optional Devices SD/MMC/SM/MS/MS Pro/xD Memory Cards The computer is equipped with a Multiple Digital Media Card Slot that can accommodate SD/MMC/SM/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use flash-memory.
Optional Devices Be sure the memory card is oriented properly before you insert it. If Windows fails to read the memory card, remove it then reinsert it. ■ 5V SmartMedia card is not supported. ■ Memory Stick Duo/ Memory Stick Pro Duo/ Mini-SD card is not supported. Removing a Memory card To remove a memory card, follow the steps below. 1. Click the Safely Remove Hardware icon on the Task Bar. 2. Stop a memory card device which you want to remove. 3. Grasp the card and remove it.
Optional Devices Memory card care Set the write-protect switch to the lock position, if you do not want to record data. 1. Do not write to a memory card if the battery power is low. Low power could affect writing accuracy. 2. Do not remove a memory card while read/write is in progress. 3. The memory card is designed so that it can be inserted only one way. Do not try to force the card into the slot. 4. Do not leave a memory card partially inserted in the slot.
Optional Devices Follow these steps to install a memory module: 1. Set the computer to boot mode and turn off the power. Do not try to install a memory module under the following conditions. You can damage the computer and the module. 2. 3. 4. 5. a. The computer is turned on. b. The computer was shut down using the Stand by mode. c. Power to the optical media drive has been turned on by the CD Power switch. Remove all cables connected to the computer.
Optional Devices 1 2 1 1 2 Installing a module 8. Seat the cover and secure it with the screw. 9. Replace the battery pack as described in Chapter 6, Power System. 10. Turn the power on and make sure the added memory is recognized. Removing memory module If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. To remove the memory module, make sure the computer is in boot mode then: 1.
Optional Devices 4. Push the latches to the outside to release the module force one end of the module up ➁. ➀. A spring will 5. Grasp the module and pull it out. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. 2 1 LATCH 1 2 Removing the memory module 6. Seat the cover and secure its screw. 7. Replace the battery. Additional battery pack You can increase the portability of the computer with additional battery packs.
Optional Devices External monitor An external analog monitor can be connected to the external monitor port on the computer. To connect a monitor, follow the steps below. 1. Turn the computer off. 2. Connect the monitor to the external monitor port. 3. Turn the monitor's power on. 4. Turn the computer on. When you turn on the power, the computer automatically recognizes the monitor. To change the display settings, press Fn + F5.
Optional Devices i.LINK (IEEE1394) i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as: ■ Digital video cameras ■ Hard disk drives ■ MO drives ■ Optical media drives i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply. Precautions ■ Make a back-up of your data before transferring it to the computer. There is a possibility that the original data will be damaged.
Optional Devices Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer.
Toshiba A80 Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines: ■ Stop immediately when you recognize a problem exists.
Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer. This includes your printer and any other external device you are using. ■ Before you attach an external device, turn the computer off. When you turn the computer back on it recognizes the new device.
Troubleshooting Software The problems may be caused by your software or diskette. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation. These documents usually include a problem solving section or a summary of error messages. Next, check any error messages in the OS documentation.
Troubleshooting System start-up When the computer does not start properly, check the following items: ■ Self Test ■ Power Sources ■ Power-on Password Self test When the computer starts up, the self test will be run automatically, and the following will be displayed: This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system. Depending on how the Boot Priority is set in the computer’s BIOS.
Troubleshooting Overheating power down If the computer’s internal temperature becomes too high, the computer will automatically shut down. AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator. Refer to Chapter 6, Power System, for more information. Toshiba A80 Problem Procedure AC adaptor doesn't power the computer (DC IN indicator does not glow blue). Check the connections.
Troubleshooting Battery If you suspect a problem with the battery, check the DC IN indicator as well as the indicators for the battery. For information on indicators and battery operation see Chapter 6, Power System. Problem Procedure Battery doesn't power the computer. The battery may be discharged. Connect the AC power cord to charge the battery. Battery doesn't charge when the AC power cord is attached. (Battery indicator does not glow amber.
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard. Problem Procedure Some letter keys produce numbers. Check that the numeric keypad overlay is not selected. Press Fn + F10 and try typing again. Output to screen is garbled. Make sure the software you are using is not remapping the keyboard. Remapping involves reassigning the meaning of each key. See your software's documentation.
Troubleshooting Hard disk drive Problem Procedure Computer does not boot Insert a system diskette and reboot. from hard drive. There may be a problem with your operating system files. Refer to your OS documentation. Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk. Refer to your OS documentation or online HELP for information on running SCANDISK and the defragmenter. Contact your dealer if the problems continue.
Troubleshooting CD-RW/DVD-ROM drive For more information, refer to Chapter 4, Network and Entertainment. Problem Procedure You cannot access a CD/DVD in the drive. Make sure the drive's drawer is securely. Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated. It should lie flat with the label facing up. A foreign object in the drawer could block laser light from reading the CD/DVD. Make sure there is no obstruction. Remove any foreign object.
Troubleshooting DVD±R/±RW drive (DVD Dual Drive) For more information, refer to Chapter 4, Network and Entertainment. Problem Procedure Some CD run correctly, The software or hardware configuration may be but others do not. causing a problem. Make sure the hardware configuration matches your software's needs. Check the CD/DVD's documentation. Check the type of CD/DVD you are using.
Troubleshooting DVD Super Multi drive For more information, refer to Chapter 4, Network and Entertainment. Problem Procedure You cannot access a CD/DVD in the drive. Make sure the drive's drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated. It should lie flat with the label facing up. A foreign object in the drawer could block laser light from reading the CD/DVD. Make sure there is no obstruction. Remove any foreign object.
Troubleshooting Problem Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. ■ Do not run or start other software during writing. ■ Do not jar the computer during writing. ■ Do not connect/ disconnect external devices or install/remove internal cards during writing.
Troubleshooting PC Card Refer also to Chapter 8, Optional Devices. Problem Procedure PC Card error occurs. Reseat the PC Card to make sure it is firmly connected. Make sure the connection between the external device and the card is firm. Check the card's documentation. If problems persist, contact your dealer. Memory cards Refer also to Chapter 8, Optional Devices. Problem Procedure Memory card error occurs. Reseat the memory card to make sure it is firmly connected. Check the card's documentation.
Troubleshooting Problem Procedure Double-tapping does not work. Try changing the double-click speed setting in the mouse control utility. 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Buttons tab. 3. Set the double-click speed as instructed and click OK. The mouse pointer moves too fast or too slow. Try changing the speed setting in the mouse control utility. 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Pointer Options tab. 3.
Troubleshooting USB Refer also to your USB device’s documentation. Problem Procedure USB device does not work. Check for a firm cable connection between the USB ports on the computer and the USB device. Make sure the USB device drivers are properly installed. Refer to your Windows documentation for information on checking the drivers. If problems persist, contact your dealer. Standby/Hibernation Problem Procedure The system will not enter Is Windows Media™ Player open? The system Standby/Hibernation.
Troubleshooting Memory expansion Refer also to Chapter 8, Optional Devices, for information on installing memory modules. Problem Procedure The computer hangs up and issues beep sounds. (A long leep, three short beeps, three short beeps, and then a long beep.) Make sure the memory module installed in the expansion slot is compatible with the computer. If an incompatible module has been installed, follow the steps below. 1. Turn off the power. 2. Disconnect the AC adaptor and all periph-eral devices. 3.
Troubleshooting Problem Procedure Character display In data transmission, make sure the parity bit and becomes garbled during stop bit settings correspond with those of the a communication. remote computer. Check the flow control and communication protocol. You cannot receive an incoming call. Check the "rings before auto answer" setting in your communications application. If problems persist, contact your dealer. Problem Procedure Cannot access LAN LAN jack and the Wake up on LAN does not work.
Troubleshooting Monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation. Problem Procedure Monitor does not turn on. Make sure that the external monitor's power switch is on. Confirm that the external monitor's power cable is plugged into a working power outlet. No display Try adjusting the contrast and brightness controls on the external monitor. Press hotkeys Fn + F5 to change the display priority and make sure it is not set for the internal display.
Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first. Before contacting TOSHIBA, try the following: ■ Review troubleshooting sections in the documentation for software and peripheral devices.
Toshiba A80 Appendix A Specifications This appendix summarizes the computer's technical specifications. Dimensions 338 mm x 279.7 mm x 29.4 mm (Front)/36.9 mm (Rear) Weight 3 kg/6.6 lbs Dimensions and weight may vary with other configurations. Above dimensions and weights are measured at a specific criteria. They are not guaranteed as the maximum dimensions and weight of the actual product.
Specifications Built-in Modem Network control unit (NCU) Type of NCU AA Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer's speaker Communication specifications Communication System Data: Fax: Communication Protocol Data: ITU-T-Rec (Former CCITT) Bell Fax: ITU-T-Rec (Former CCITT) Toshiba A80 Full duplex Half duplex V.21/V.22/V.22bis/V.32/ V.32bis/V.34/V.90/ V.92(only for USA and Canada) 103/212A V.
Toshiba A80 Appendix B Display Modes This appendix contains a table of the display mode options of your computer.
Toshiba A80 Appendix C AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 2 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Voltage rating: 125 or 250 VAC (depending on country/region's power standards) Certification agencies U.S.
AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U. S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U. S. A.
Toshiba A80 Appendix D If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office.
If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Toshiba A80) Model number: (e.g. PSL10YXT) Serial number: (e.g.
Toshiba A80 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
Glossary RAM: random access memory ROM: read only memory RTC: real time clock SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array XGA: extended graphics array A adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
Glossary C cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time. The computer has two cache levels. Level one is incorporated into the processor and level two resides in external memory.
Glossary CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. D DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries. default: The parameter value automatically selected by the system when you or the program do not provide instructions.
Glossary floppy disk drive (FDD): An electromechanical device that reads and writes to floppy disks. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk. function keys: The keys labeled F1 through F12 that tell the computer to perform certain functions.
Glossary IrDA 1.1: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 Mbps. J jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte.
Glossary N numeric keypad overlay: A feature that allows you to use certain keys on the keyboard to perform numeric entry, or to control cursor and page movement. O operating system: A group of programs that controls the basic operation of a computer. Operating system functions include interpreting programs, creating data files, and controlling the transmission and receipt (input/output) of data to and from memory and peripheral devices. output: The results of a computer operation.
Glossary ROM: Read Only Memory: A nonvolatile memory chip manufactured to contain information that controls the computer’s basic operation. You cannot access or change information stored in ROM. S SCSI: Small Computer System Interface is an industry standard interface for connection of a variety of peripheral devices. soft key: Key combinations that emulate keys on the IBM keyboard, change some configuration options, stop program execution, and access the numeric keypad overlay.
