E9TK5FD_EN.book Page 1 Wednesday, January 13, 2010 10:33 AM Introduction Basic Setup / TV View Operation DVR80KF Connections DVD / VIDEO CASSETTE RECORDER OWNER’S MANUAL Recording PAL SECAM Playback Editing Function Setup EN For Customer Use: Carefully read the Model No. and Serial No. located at the back of the unit and enter the information below. Retain this information for future reference. Model No. __________________________ Serial No.
E9TK5FD_EN.book Page 2 Wednesday, January 13, 2010 10:33 AM . Introduction Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
E9TK5FD_EN.book Page 3 Wednesday, January 13, 2010 10:33 AM This product consists of materials which can be recycled and reused if disassembled by a specialised company. Moisture Condensation Warning Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, after heating a cold room, or under conditions of high humidity. Do not use the unit for at least 2 hours to allow the inside to dry.
E9TK5FD_EN.book Page 4 Wednesday, January 13, 2010 10:33 AM Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks and DTS Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
E9TK5FD_EN.book Page 5 Wednesday, January 13, 2010 10:33 AM • Remote control with 2 R6 (1.5 V) batteries • RF cable • Owner’s Manual The following features are available with this unit.
E9TK5FD_EN.book Page 6 Wednesday, January 13, 2010 10:33 AM Table of Contents Introduction ...................................................... 2 Function Setup ............................................... 61 Precautions ........................................................................ 2 General Setting ................................................................ 63 Features ............................................................................. 5 Guide to the Owner’s Manual ..
E9TK5FD_EN.book Page 7 Wednesday, January 13, 2010 10:33 AM Introduction Guide to the Owner’s Manual Symbols Used in the Owner’s Manual Symbol Connections To show what recording mode or media type applies to each function, the following symbols appear at the beginning of each operating item.
E9TK5FD_EN.book Page 8 Wednesday, January 13, 2010 10:33 AM Discs for Recording / Playing Disc Type DVD-RW DVD-R DVD+RW DVD+R Logo Automatically formatted in video mode Format Can be formatted in VR or video mode Video Mode Icon Maximum Record Time VR DVD-RW DVD-RW 480 min (12 cm) 144 min (8 cm) Playable on most DVD players. Finalisation Compatibility necessary.
E9TK5FD_EN.book Page 9 Wednesday, January 13, 2010 10:33 AM Introduction Discs for Playing Disc Type DVD-VIDEO CD-DA Video CD CD-RW CD-R Logo Icon CD VCD CD CD Connections DVD-V Files for Playing MP3 JPEG DivX® Icon MP3 JPEG DivX CD-RW/-R USB device CD-RW/-R USB device CD-RW/-R DVD-RW/-R DVD+RW/+R USB device (not guaranteed) Media ® is a trademark of DVD Format/Logo Licensing Corporation. The following discs will not play back on this unit.
E9TK5FD_EN.book Page 10 Wednesday, January 13, 2010 10:33 AM Functional Overview Front Panel 1*3 2 3*1 4 VCR VCR PROGRAM DUBBING 5 DVD DVD SELECT VCR DVD USB 21 19*2 17*2 15 20*2 18 16 14 13 12 10 11 8 9*1 DV IN 7 6 You can also turn on the unit by pressing these buttons. You can turn on the unit by pressing these buttons only when a videotape is in this unit. Press to turn on the unit, or to turn the unit into the standby mode.
E9TK5FD_EN.book Page 11 Wednesday, January 13, 2010 10:33 AM 18 19 20 MODE (YELLOW) button (VHS) SEARCH (BLUE) button (VHS) 3 5 6 24 25 7 26 8 27 9 28 10 29 30 13 31 32 33 14 34 35 36 37 Note • If you turn off this unit, [OPEN\CLOSE A] on the remote control is not available. Be sure to use [A OPEN\CLOSE] or [STOP\EJECT C \ A] on the unit.
E9TK5FD_EN.book Page 12 Wednesday, January 13, 2010 10:33 AM Installing Batteries in the Remote Control Install 2 R6 (1.5 V) batteries (supplied) into the remote control, carefully match with the polarity indicated inside the battery compartment. 1 2 Switching DVD / VHS mode You must select which component you want to operate first. Press [DVD] or [VCR] on the remote control or the front panel.
E9TK5FD_EN.book Page 13 Wednesday, January 13, 2010 10:33 AM Guide to On-Screen Displays Introduction Press [DISPLAY] repeatedly while the display menu is displayed to display the following information.
Title name information DISPLAY Menu Title Name DVD My Title T 1/ 5 C 1/ 5 0:01:00 / 1:23:45 1 -RW 3 VR ORG (only when DVD+RW/+R, VR mode DVD-RW or unfinalised video mode DVD-RW/-R disc is in playback) File name information 8 2 &ILE .E9TK5FD_EN.book Page 14 Wednesday, January 13, 2010 10:33 AM INFO Menu VHS While in the VHS mode, the on screen display of the VHS mode is displayed. Press [VCR] first. Press [DISPLAY] to display the on screen display. DVB Press [INFO C] while viewing a DVB programme to display the programme information. . 3 1 2 STEREO 3 12:00 AV2 7 6 SP 0:00:00 5 STEREO 4 This is an example screen for explanation. Displayed items are depending on the actual mode.
E9TK5FD_EN.book Page 15 Wednesday, January 13, 2010 10:33 AM Introduction Main Menu B Timer Programming Press [SETUP] to display the main menu. Then use [K \ L] to select a menu and press [ENTER\OK] to display the sub menu. Press [RETURN] to return to previous screen. To programme a timer recording. [E Page 33] C Title List To call up the title list.
E9TK5FD_EN.book Page 16 Wednesday, January 13, 2010 10:33 AM Front Panel Display Guide 1 2 DTV DB VCR 3 DVD 4 1 DTV indicator : Appears when a disc is in this unit. : Appears when the channel is in digital mode. 2 : : 3 DB : Title / Track and Chapter number Appears during dubbing. DVD :Appears when this unit is in DVD output mode, or Title / track number Chapter number the timer-standby mode for DVD recording.
E9TK5FD_EN.book Page 17 Wednesday, January 13, 2010 10:33 AM Connect the unit to a TV after considering the capabilities of your existing equipment. Before installation, unplug your TV and this unit Antenna RF cable (not supplied) 1 To Aerial jack Audio IN Component video IN Y PB/CB Recording If your TV has component video input jacks, use a component video cable (to connect the COMPONENT VIDEO OUT jacks) and an audio cable (to connect the AUDIO OUT (L\R) jacks).
E9TK5FD_EN.book Page 18 Wednesday, January 13, 2010 10:33 AM Using an HDMI Compatible Port [HDMI CONNECTION] • HDMI outputs the video / audio signals without converting to analogue signals. • No audio connections is required. • Use the HDMI cable (commercially available) for connection. • Connect the HDMI output jack of this unit to the HDMI input jack of TV.
E9TK5FD_EN.book Page 19 Wednesday, January 13, 2010 10:33 AM Recording from a DVD player, Satellite Box or other Audio-Video equipment with a Scart output socket (AV2) Digital Audio for Better Sound Quality Dolby Digital decoder, DTS decoder or MPEG decoder, etc. Digital audio input jack COAXIAL Connections This unit has three input terminals. Press [INPUT SELECT F] repeatedly to select the external input mode, then press [PROG. G \ H] repeatedly to select AV1, AV2 or DV(AV3).
E9TK5FD_EN.book Page 20 Wednesday, January 13, 2010 10:33 AM Basic Setup / TV View Operation 6 Initial Setting After finishing channel setting, “Clock Setting” will appear. #LOCK 3ETTING When you turn on this unit for the first time, you need to follow these steps. 1 2 Turn the TV on. Select the input to which the unit is connected. Select your desired language for the OSD using [K \ L]. Then press [ENTER\OK] to go to the next step. Langue Aff.
E9TK5FD_EN.book Page 21 Wednesday, January 13, 2010 10:33 AM Channel Setting Select “Auto Tuning” using [K \ L], then press [ENTER\OK]. The unit will start storing channels available in your area. You can retune this unit or edit the channel setting with following methods. !.!,/' #HANNEL 3ETUP !UTO 4UNING -ANUAL 4UNING -OVE Auto Tuning (DVB & ANALOG) ANALOG Programme the tuner to scan both analogue and DVB channels you can receive in your area. 1 In stop mode, press [SETUP].
E9TK5FD_EN.book Page 22 Wednesday, January 13, 2010 10:33 AM 9 Select “Channel” using [K \ L], then press [1]. 10 Press [K \ L] to start scanning. • The tuner will begin to search up or down automatically. When a channel is found, the unit will stop searching and the picture will appear on the TV screen. • You can select a desired channel number using [the Number buttons]. Refer to the following Channel Plan table and press the three digits to select the channel number.
E9TK5FD_EN.book Wednesday, January 13, 2010 10:33 AM Press [ENTER\OK] to exit. • After auto tuning is completed, the lowest memorised DVB channels appears on the screen. • You can use [PROG. G \ H] to change the DVB channels. Note Manual Tuning (DVB) DVB You can preset a DVB channel manually and individually. Select a Channel DVB Select “Manual Tuning” using [K \ L], then press [ENTER\OK]. 3 Select your desired position number using [K \ L], then press [ENTER\OK].
E9TK5FD_EN.book Page 24 Wednesday, January 13, 2010 10:33 AM 4 Quick Select DVB Select “Edit Channels” using [K \ L], then press [ENTER\OK]. • “Edit Channels” menu will appear. 2 With “Quick Select” menu, you can select your favourite DVB channel quickly. Refer to “Edit Group Lists” on this page. 1 Edit Channels S.No. Channel Name Press [ENTER\OK] while watching a DVB channel. 1 5 Quick Select Group: All Press [0 \ 1] to select your favourite group list.
E9TK5FD_EN.book Page 25 Wednesday, January 13, 2010 10:33 AM Delete Channels DVB DVB You can delete the DVB channels from the memorised DVB channels. 1 Follow steps 1 to 4 in “Edit Channels” on page 24. 1 Follow steps 1 to 4 in “Edit Channels” on page 24. 2 Select the DVB channel you want to skip using [K \ L], then press [GREEN]. 2 Select the DVB channel you want to delete using [K \ L], then press [BLUE]. Edit Channels S.No. Channel Name 5 Fav. Skip Lock Edit Channels S.No.
E9TK5FD_EN.book Page 26 Wednesday, January 13, 2010 10:33 AM Edit Channel Names Teletext Reception DVB DVB You can edit the DVB channel names as you want. If a broadcaster provides a DVB Teletext service, you can enjoy it. The DVB Teletext service includes news, weather forecast and subtitles. 1 Follow steps 1 to 4 in “Edit Channels” on page 24. 2 Select the DVB channel you want to edit the name using [K \ L], then press [RED]. 1 • Name editing display will appear.
E9TK5FD_EN.book Page 27 Wednesday, January 13, 2010 10:33 AM DVB Many DVB channels transmit Subtitle information along with their DVB channels. You can retrieve and display it on the TV screen. While viewing a DVB programme, press [SUBTITLE]. • If the programme has no subtitle information, “No Information.” will appear. • Select the channel and TV programme using [K \ L \ 0 \ 1]. • Press [ENTER\OK] or [BLUE] to go to “Timer Programming” menu after you select the TV programme using [K \ L \ 0 \ 1].
E9TK5FD_EN.book Page 28 Wednesday, January 13, 2010 10:33 AM Recording Restrictions on Recording Information on DVD Recording Type of Discs This unit can record on DVD-RW/-R discs and DVD+RW/+R discs. DVD-R/+R discs allow you to record programmes only once, and the recorded contents can be erased although the space left on the disc does not change. DVD-RW/+RW discs allow you to record programmes repeatedly, and the recorded contents can be erased.
E9TK5FD_EN.book Page 29 Wednesday, January 13, 2010 10:33 AM Introduction Making Discs Playable in Other DVD Players (Finalise) After recording, you must finalise the disc to play it back in other players. (See page 42.) You cannot finalise discs in other DVD recorders. Disc Type DVD-R DVD-RW Video Mode VR Mode DVD+RW DVD+R ✔ ✔ After finalising Undo finalising (See page 42.) Additional recording or editing (See page 42.
E9TK5FD_EN.book Page 30 Wednesday, January 13, 2010 10:33 AM Make Recording Compatible Formatting a Disc Choosing the Recording Format of a Blank DVD-RW Disc Video VR DVD-RW DVD-RW When inserting a brand-new DVD-RW/+RW disc, the unit automatically starts to initialise the disc. DVD+RW disc will always be formatted in +VR mode, and DVD-RW disc will be formatted either video or VR mode according to the recording format mode setting of the unit.
E9TK5FD_EN.book Page 31 Wednesday, January 13, 2010 10:33 AM Video 5 VR e.g.) VR mode DVD-RW DVD-RW DVD-RW DVD-R DVD+RW DVD+R The unit inserts a chapter mark periodically (every 15 minutes by default) during recording. Using the Auto Chapter menu, you can set this function off or change the time period. In stop mode, press [SETUP]. Select “General Setting” using [K \ L], then press [ENTER\OK]. 2 Select “Recording” using [K \ L], then press [ENTER\OK].
E9TK5FD_EN.book Page 32 Wednesday, January 13, 2010 10:33 AM Setting Bilingual Recording Audio Video DVD-RW DVD-R DVD+RW DVD+R You can select either “Main” or “Sub” audio to record a bilingual broadcast in video mode or +VR mode. This setting is only for recording analogue channel. 1 In stop mode, press [SETUP]. Select “General Setting” using [K \ L], then press [ENTER\OK]. 2 Select “Recording” using [K \ L], then press [ENTER\OK].
E9TK5FD_EN.book Page 33 Wednesday, January 13, 2010 10:33 AM 9 Introduction • When the unit reaches the specified time, it will be turned off automatically. • To change the recording length during One-touch Timer Recording, press [REC I] repeatedly until the desired length appears. • To cancel One-touch Timer Recording within the specified time, press [STOP C]. Timer Recording DVB ANALOG Video VR DVD-RW DVD-RW DVD-R DVD+RW DVD+R Press [STOP C] to stop the recording.
E9TK5FD_EN.book 5 Page 34 Wednesday, January 13, 2010 10:33 AM Select the digital (DVB) / analogue (ATV) mode or external input (AV1/AV2) using [K \ L], then press [1]. 6 Select the channel number to record using [K \ L], then press [1]. 7 Select the recording media (“DVD” or “VCR”) using [K \ L], then press [1]. 8 Select the recording mode using [K \ L], then press [1]. Refer to “Recording Mode” on page 28 for DVD or page 70 for VHS.
E9TK5FD_EN.book Page 35 Wednesday, January 13, 2010 10:33 AM 1 Press [TIMER SET] to cancel the timer-standby mode. 2 Press [TIMER PROG.]. If the Timer Programming did not Complete Correctly The error number appears on “Timer Programming” list. Timer Programming “Timer Programming” list will appear. Press [TIMER SET] to return to the timerstandby mode. To check the timer programming in progress Press [TIMER PROG.]. Note 1/1 The error programme will be displayed in grey with an error number.
E9TK5FD_EN.book Page 36 Wednesday, January 13, 2010 10:33 AM Notes for the Timer Recording • If there is a power failure or the unit is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If there is no disc or an unrecordable disc in the tray (finalised DVD-RW/-R, finalised DVD+R, a fully recorded disc, etc.), the DVD on the front panel display will flash and the timer recording will not occur. Insert a recordable disc.
E9TK5FD_EN.book Page 37 Wednesday, January 13, 2010 10:33 AM Satellite Link You can set the unit to start recording whenever it detects the video scart control from the external tuner. DVB Video VR 1 Preparing for the satellite link timer recording: While viewing a DVB programme, press [GUIDE]. List of DVB programmes will be displayed. e.g.) Daily Mode [Preparation of this unit] • Make sure to select the desired recording mode beforehand.
E9TK5FD_EN.book Page 38 Wednesday, January 13, 2010 10:33 AM Note • If you have not set the clock, the clock setting window will appear and follow to “A Clock Setting” on page 67. • You cannot set the End time for the satellite link timer recording on this unit. • Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording. • When a regular timer recording and the satellite link timer recording are overlapped, the examples are given below.
E9TK5FD_EN.book Page 39 Wednesday, January 13, 2010 10:33 AM When the DVC is in video mode... Press [VCR]. Insert a videotape with a record tab into the cassette compartment. 3 T 1 2 1/ 1 C 1/ 1 -RW Control DV Audio Start Rec Select the input terminal to which the external equipment is connected (AV1 or AV2).
E9TK5FD_EN.book 7 Page 40 Wednesday, January 13, 2010 10:33 AM Status of the current operation and the time counter 4 Each icon means (Available icons may vary depending on the DVC): With “Control” highlighted, press [ENTER\OK] to display the available devices to control with the remote control of this unit. Select “DVC” using [K \ L], then press [ENTER\OK]. e.g.) DVC to DVD dubbing DVC is in stop mode. DVC is in playback mode. T 1/ 1 C 1/ 1 DVC is in pause mode.
E9TK5FD_EN.book Page 41 Wednesday, January 13, 2010 10:33 AM Dubbing Mode Video VR DVD-RW DVD-RW DVD-R DVD+RW Note for recording to a disc: • The DVD disc is satisfied with the recording status. See pages 28 to 29. In stop mode, press [SETUP]. Select “General Setting” using [K \ L], then press [ENTER\OK]. 2 Select “Recording” using [K \ L], then press [ENTER\OK]. 3 Select “Dubbing Mode” using [K \ L], then press [ENTER\OK].
E9TK5FD_EN.book Page 42 Wednesday, January 13, 2010 10:33 AM Setting a Disc to Protect VR To cancel finalising (DVD-RW disc only): At step 4, press [STOP C]. Select “Yes” using [K \ L], then press [ENTER\OK]. Finalising is cancelled and the unit switches to stop mode. DVD-RW DVD+RW DVD+R To prevent accidental over-recording, editing or erasing of recordings, you can protect them using “Setup” menu. Do you want to cancel? Yes No Insert a recordable disc. 1 In stop mode, press [SETUP].
E9TK5FD_EN.book Page 43 Wednesday, January 13, 2010 10:33 AM Introduction Playback Note Note for DVD Playback The contents of a DVD are generally divided into titles. Titles are further subdivided into chapters depend on Auto Chapter setting (See page 31). Stop Rec./Start Rec. Title 1 Stop Rec.
E9TK5FD_EN.book 4 Page 44 Wednesday, January 13, 2010 10:33 AM Press [K \ L] to select the desired track / file or folder, then press [ENTER\OK]. e.g.) Photo (JPEG) files File List DISC NAME A B JPEG file1 JPEG file2 JPEG file3 JPEG file4 JPEG file5 JPEG file6 Note • Files with extensions other than “.mp3 (MP3)” or “.jpg / .jpeg (JPEG)” will not be listed in the File List. • Some folders or tracks listed in the File List may be unplayable due to their recording status.
E9TK5FD_EN.book Wednesday, January 13, 2010 10:33 AM In stop mode, plug your USB flash memory. DivX® VOD File type selection screen will appear. DivX ® VCR PROGRAM VCR DUBBING DVD SELECT DVD USB DV IN 1 2 3 Video Files Music Photo DivX® VOD DivX Subtitle DivX® VOD selection screen will appear. 2 Select the desired file type using [K \ L], then press [ENTER\OK]. DivX® VOD Registration Code Deactivation Code Deactivation Your registration code or deactivation code will appear. e.g.
E9TK5FD_EN.book Page 46 Wednesday, January 13, 2010 10:33 AM Hint for the purchased or rental official DivX® Certified product • When you purchased or rental a DivX® file through the official site of DivX® video which is called DivX® Video-OnDemand (VOD) services, a registration code is required every time you get the new file from the DivX® VOD services. Refer to “DivX® VOD” on page 45. • Some DivX® VOD files are restricted with the limited playable times (you cannot play them back beyond the limit).
E9TK5FD_EN.book Wednesday, January 13, 2010 10:33 AM Select a desired item using [K \ L \ 0 \ 1], then press [ENTER\OK]. The disc will start playing back at the title you selected. The following operations are available. [TOP MENU] button: Displays the DVD “Title Menu” which will vary between discs. VCD (PBC OFF) [K \ L \ 0 \ 1] buttons: Move the cursor from item to item on the screen. Insert a video CD. 1 In stop mode, press [SETUP]. [ENTER\OK] button: Selects the currently highlighted menu option.
E9TK5FD_EN.book Page 48 Wednesday, January 13, 2010 10:33 AM Fast Forward / Fast Reverse DVD-V DVD+R 1 Video VR DVD-RW DVD-RW CD Pause DVD-R VCD MP3 DivX ® DVD+R During playback, press [FWD D] or [REV E]. Each time you press [FWD D] or [REV E], the approximate speed will change as follows. Fast forward or fast reverse playback across titles (for DVDs) or tracks / files (for video CD / MP3 / DivX®) is not possible.
E9TK5FD_EN.book Page 49 Wednesday, January 13, 2010 10:33 AM Note Video VR DVD-V DVD-RW DVD-RW DVD+R VCD JPEG DivX DVD-R DVD+RW ® During playback, press [DISPLAY] to bring up the display menu. 2 Select the icon using [0 \ 1] to display the selection menu. T 1/ 5 C 1/ 5 0:01:00 / 1:23:45 DVD Video Chasing Playback during Recording Four options are available, “x1.0”, “x1.2”, “x1.5” and “x2.0”. These are displayed excluding the current zoom rate.
E9TK5FD_EN.book Page 50 Wednesday, January 13, 2010 10:33 AM 3 Press [STOP C] once to stop playback. Using the [TIME SLIP] button The resume message will appear. With [TIME SLIP], even if you leave your couch while you are watching TV through this unit, you can come back and watch rest of the programme from right where you left at any convenient time with just one button. Please make sure to put VR mode DVD-RW disc, and set the recording mode to LP, EP or SLP.
E9TK5FD_EN.book Page 51 Wednesday, January 13, 2010 10:33 AM 3 Enter the desired title number to search for using [K \ L] or [the Number buttons], then press [ENTER\OK]. Title search will start. Note CD You can search the desired track directly. Using [the Number buttons] 1 During playback, if the display menu is not displayed, press [the Number buttons] to enter the desired track number. Note Chapter Search Press [0 \ 1] to highlight the number displayed in the right side of the icon.
E9TK5FD_EN.book Page 52 Wednesday, January 13, 2010 10:33 AM Random Playback Repeat / Random / Programme Playback / Slide Show CD You can use this function to play back a disc randomly instead of in the recorded order. Repeat Playback DVD-V DVD+R Video VR DVD-RW DVD-RW CD VCD DVD-R DVD+RW 1 2 MP3 JPEG DivX ® 2 3 During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. Select the icon using [0 \ 1] to display the selection menu.
E9TK5FD_EN.book Page 53 Wednesday, January 13, 2010 10:33 AM Selecting the Format of Audio and Video VCD CD (PBC OFF) You can programme the disc to play back in your desired order. Follow steps 1 to 2 in “Random Playback” on page 52. 2 Select “Programme Play” using [K \ L], then press [ENTER\OK]. 3 Select the desired track using [K \ L], then press [ENTER\OK] or [1].
E9TK5FD_EN.book 3 Page 54 Wednesday, January 13, 2010 10:33 AM Select a desired audio soundtrack or audio channel using [K \ L], then press [ENTER\OK]. With a DVD-video, VR mode DVD-RW, or DivX® files: Audio soundtrack will switch. Example: English J Spanish J French If the title contains both main and sub audio, you can further select L (main), R (sub), L/R (mixed of main and sub). With an audio CD or video CD: The Audio channel will switch.
E9TK5FD_EN.book Page 55 Wednesday, January 13, 2010 10:33 AM 1 Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [DVD], then press [TOP MENU].
E9TK5FD_EN.book Page 56 Wednesday, January 13, 2010 10:33 AM Deleting Titles Editing Discs You will find editing discs is easy. This unit offers convenient edit functions. You can edit the following from a title list.
E9TK5FD_EN.book Page 57 Wednesday, January 13, 2010 10:33 AM Video Guide to Editing Title Names VR DVD-RW DVD-R DVD-RW DVD+RW DVD+R You can edit the title names from this menu. The title names you edit will appear on the title list. Press [DVD] first. Step 2 : Using the list below as a guide, press [the Number buttons] repeatedly until the desired letter appears. In stop mode, press [TOP MENU]. Select Press “Title List” will appear.
E9TK5FD_EN.book 5 6 Page 58 Wednesday, January 13, 2010 10:33 AM Select “Yes” using [K \ L], then press [ENTER\OK]. Hiding Chapters Adding a chapter mark: If you select “Add” at step 4, a new chapter mark is created at the point you specified. DVD+RW DVD+R You can hide chapters from the title list. Hidden chapters are skipped during playback. Deleting a chapter mark: If you select “Delete” at step 4, the chapter mark you selected is deleted. Press [DVD] first.
E9TK5FD_EN.book Page 59 Wednesday, January 13, 2010 10:33 AM Writing onto the disc starts. It may take awhile to write the data on a disc. VR DVD+RW DVD-RW Press [RETURN] to exit. Note Playlist You can divide a title into two new titles. Press [DVD] first. Follow steps 1 to 3 in “Editing Title Name” on page 57. 2 Use [SKIP H \ G], [REV E], [FWD D], [PLAY B] and [PAUSE F] to find where you want to divide the title.
E9TK5FD_EN.book Page 60 Wednesday, January 13, 2010 10:33 AM Deleting All Playlists Deleting Parts of Titles VR VR DVD-RW All Playlists can be deleted if it is no longer needed. 1 2 3 Press [SETUP]. DVD-RW You can delete a specific part of a title. Even when a title is deleted from the Playlist, the original title will remain as it is. The available recording time on the disc will not increase. Select “DVD Menu” using [K \ L], then press [ENTER\OK]. Press [DVD] first.
E9TK5FD_EN.book Page 61 Wednesday, January 13, 2010 10:33 AM Introduction Function Setup The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Items (highlight is the default) Parental Lock E Page 64 Audio Out Dynamic E Pages 64-65 Range Control PCM MPEG DTS Disc Menu Language E Page 65 General Setting Display TV System E Page 66 OSD Language E Page 66 Video Out E Page 67 Set the language for subtitles.
E9TK5FD_EN.book Setup Recording Page 62 Wednesday, January 13, 2010 Items (highlight is the default) Auto Chapter E Page 31 Recording Audio Select (XP) E Page 32 Auto Finalise E Page 42 Aspect Ratio (Video mode) E Page 30 Dubbing Mode E Page 41 Make Recording Compatible E Page 30 Bilingual Recording Audio E Page 32 External Input Audio E Page 31 Video Colour System E Page 38 10:33 AM Contents Insert chapter marks periodically.
E9TK5FD_EN.book Page 63 Set whether to output the HDMI audio signal or not. Set the black-white contrast level for HDMI RGB output. Set the Adult Lock and change Pincode. Lock each DVB programme. Set the Audio language. Set the Subtitle language. Check the current DVB system software version of the unit. Set to the default setting. About E Page 69 Reset All E Page 69 Basic Setup / TV View Operation Subtitle Contents Set the colour space for the HDMI output.
E9TK5FD_EN.book Page 64 Wednesday, January 13, 2010 10:33 AM Playback Setup A General Setting A Playback A password is already set 1 Enter the current password using [the Number buttons]. A B C D E F G H Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode TV System Password Input 2-A Select “No” using [K \ L], then press [ENTER\OK]. Change Password? Yes No A Parental Lock (Default: OFF) (DVD only) “Parental Lock” level is activated.
E9TK5FD_EN.book Page 65 Wednesday, January 13, 2010 10:33 AM PCM 48kHz 96kHz C Disc Menu Language (Default: French) (DVD only) Set “Disc Menu Language”. Disc Menu Language : If your amplifier / decoder is NOT compatible with 96 kHz PCM, select “48kHz”. Sound recorded at 96 kHz is down sampled to 48 kHz. 96kHz : If your amplifier / decoder is compatible with 96 kHz PCM, select “96kHz”. Sound is sampled at 96 kHz. Note D Audio Language (Default: Original) (DVD only) Set “Audio Language”.
E9TK5FD_EN.book Page 66 Wednesday, January 13, 2010 10:33 AM G Still Mode (Default: Auto) (DVD only) Still Mode Display Setup A General Setting A Display Auto Field Frame Auto Field Frame : Automatically select the best resolution setting (“Frame” or “Field”) based on the data characteristics of the pictures. : Select “Field” when the pictures are still unstable even if “Auto” is selected.
E9TK5FD_EN.book Page 67 Wednesday, January 13, 2010 10:33 AM Introduction 3 Select “Yes” using [K \ L], then press Video [ENTER\OK] within 15 seconds. Setup A General Setting A Video Confirm again to use progressive scan. If picture is good, select “Yes”. A TV Aspect B Video Out Use this feature to adjust the aspect ratio of the video source which is different from your TV’s ratio to fit your TV monitor without distorting the picture.
E9TK5FD_EN.book Page 68 Wednesday, January 13, 2010 10:33 AM B Auto Clock Setting (Default: ON) This unit receives time signals from the analogue / DVB channels, and set the clock automatically. Set the channel tuning before setting Auto Clock. Auto Clock Setting ON OFF HDMI Setup A General Setting A HDMI • Make sure that the HDMI cable is connected and the TV input is set to HDMI. A Format B HDMI Audio C RGB Range 1 Select “ON” using [K \ L], then press [ENTER\OK]. 2 Press [SETUP] to exit.
E9TK5FD_EN.book Page 69 Wednesday, January 13, 2010 10:33 AM Setup A General Setting A DVB Setting You can make settings of the digital tuner from the DVB Setting. DVB Language Audio Subtitle Adult Lock Maturity Lock Language About Audio : Set the Audio language. Subtitle : Set the Subtitle language. A Adult Lock (Default: OFF) DVB 1 Select “ON” or “OFF” using [K \ L], then press [ENTER\OK].
E9TK5FD_EN.book Page 70 Wednesday, January 13, 2010 10:33 AM VHS Functions Common Procedures 1 Press [B ON\STANDBY] to turn on the unit. To play back a tape, turn on the TV and be sure to select the input to which the unit is connected. 2 Basic Recording and One-touch Timer Recording (OTR) VHS Press [VCR].
E9TK5FD_EN.book Page 71 Wednesday, January 13, 2010 10:33 AM One-touch Timer Recording will start. 0:30 8:00 This function helps you to dub the contents in the DVC (digital video camcorder) to VHS. Preparing for DV dubbing (DVC to VHS): 1:00 • Insert a recordable videotape. • Make sure your DVC is in video mode. Press [INPUT SELECT F] repeatedly to select the external input channel, then press [PROG. G \ H] repeatedly to select DV(AV3). 2 Select the recording mode using [REC MODE].
E9TK5FD_EN.book Page 72 Wednesday, January 13, 2010 10:33 AM Time Search VHS This feature allows you to go to a specific point on a tape by entering the exact amount of time you want to skip in order to reach the point. 1 Press [SEARCH] repeatedly until the time search menu appears. 2 Enter your desired time to skip using [the Number buttons] within 30 seconds. 3 Press [FWD D] or [REV E] to start time search. If you want to go in the forward direction, press [FWD D].
E9TK5FD_EN.book Page 73 Wednesday, January 13, 2010 10:33 AM Introduction Others Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. • Check that the AC power cord is connected securely. • Batteries of the remote control are weak. • Press [TIMER SET] to cancel the timer-standby mode.
E9TK5FD_EN.book Page 74 Wednesday, January 13, 2010 Symptom Remedy CHANNEL TV channels cannot be changed. • Check if the connections are made securely and correctly. • Check if the cables are damaged. • Try “Channel” setting by following the steps on pages 21-23. Some settings are lost even though you • If you unplug the AC mains cable while the warning message, “Saving settings. followed the procedure correctly. Please wait.”, is displayed, some settings may be lost.
E9TK5FD_EN.book Page 75 Wednesday, January 13, 2010 10:33 AM Remedy GENERAL • Check if all the connections are made correctly. • Check if the “Audio Out” is set correctly. (See pages 64-65.) • There is a possibility that the selected subtitle language is not supported by the disc. Digital audio setting cannot be changed to main audio (L), sub audio (R) or combination of both. • If the audio source is in the Dolby Digital format, set “Dolby Digital” setting to “PCM” in “Playback” menu.
DVD EDITING E9TK5FD_EN.book Page 76 Wednesday, January 13, 2010 Symptom Remedy Titles cannot be edited or deleted. • The titles or the disc itself may be protected. Cancel the protection by following the steps on page 58 for title protection and page 42 for disc protection. Dubbing cannot be executed. • When the number of the titles or the chapters exceeds the maximum recordable number, the dubbing will not be executed. Titles cannot be edited or deleted.
E9TK5FD_EN.book Page 77 Wednesday, January 13, 2010 Cause Introduction Error message 10:33 AM Solution • Insert a recordable disc with enough recording space. • Delete unnecessary original titles. (See page 56.) Recording Error You cannot record more than 99 titles on one disc. (The maximum is 99) • You are trying to record onto the DVD-RW / -R disc on which the number of recorded titles has reached the maximum (99). • Delete unnecessary original titles. (See page 56.
E9TK5FD_EN.
E9TK5FD_EN.book Page 79 Wednesday, January 13, 2010 10:33 AM Introduction Specifications General Four heads Power requirements 220–240 V Power consumption 35 W ± 10 %, 50 Hz ± 0.5 % Power consumption (standby) 0.95 W Weight 4.9 kg Dimensions (width x height x depth) 435 x 99.
E9TK5FD_EN.