÷ TOSHIBA Untroduetion v,_o VURTUAL SURROUND SPATRALiZER o_.__ ............ _ _ Various settings _ Disc pUayback H[-Fi VCR & DVD VIDEO RECORDER Tape pUaybaak SU Recording OVV'NER'S /V'IANUAL [v.
SAFTY PRECAUTIONS A CA°T'°" /k CAUTION: TO REDUCE THE RISK OF ELECTRIC The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
MPORTANT SAFEGUARDS 1. READ INSTRUCTIONS AiI the safety and operating instructions should be read before the unit is operated. 2. RETAIN _NSTRUCT_ONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS =_ AII warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS £. AII operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before eleaning.
IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wail outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fan onto or against such power lines or circuits.
MPORTANT SAFEGUARDS 19. REPLACEMENT 20. 21. 22. 23. PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
introduction @ @ O 0 @ ÷ SAFTY PRECAUTIONS ...................................... IMPORTANT SAFEGUARDS .............................. Contents ............................................................. Features .............................................................. Disc ..................................................................... Handling discs ................................................... DVD-RAM discs with cartridges are recommended for recording ...............................
Tape playback @ Leading and unmeading a cassette tape ........ 48 O Cassette tape playback ................................... 49 @ Special pmayback .............................................. Picture search .................................................. 50 50 Stiii picture ....................................................... Slow motion ..................................................... 50 50 Frame by frame picture .................................... Adjusting tracking condition .........
Recording Not only can you playback and record video tapes, but you can also playback DVD discs or make recordings using DVD-RAM, DVD-RW or DVD-R discs with this unit. In addition, you can enioy editing the programs you record.
Handling Media type discs Removing the Disc from its case Be sure to hotd the disc by its edges. Do not touch the surface of the disc. Take the disc carefully from its case. • Do not scratch the disc. • Do not get dirt on the surface of the disc. • Do not stick labels or adhesive tapes on the disc. • Do not drop or bend the disc. Storing discs • Store the disc in the case to avoid any risk of scratches, dirt or damage. • Do not leave the disc exposed to direct sunlight or in hot or humid pIaces.
DVDoR • You can record on the disc only in the Video mode. • You can record until the disc becomes full • Finalizing the discs allows playback on other DVD players. However, the finalized discs can no longer be recorded. • Discs can be recorded to repeatedIy until they are finalized, The below DVD-Video may not be played back. , DVD-Video that do not have the region number "1" or "ALL", , PAL or SECAM DVD-Video. Prohibited or business-use DVD-Video.
TRle/Chapter/Track A DVD-Video has large partitions called "Titles", and smaller partitions within them ca!Ied "Chapters". A music CD has other partitions called "Tracks". A number is allotted to each partition and these numbers are called "title numbers", "chapter numbers" or "track numbers". NOTES: • The finalization process may require from a few minutes up to I hour depending on the disc type and the amount of free space on the disc. • A DVD-RW Vet.1.1/1.
rts and functions Front * This unit has a door on the front panel+ Please open it to access the S-VHDEO jack and the AUDHO (L/R)/VHDEO HN(HNPUT 2) jacks+ Displa window REW (Rev, Jnd) button CHANNEL Ai,.
rts Display and functions window ® @ ×p RAM yV i No. (_ Display Description • Lights during video tape playback. I1| Video tape is temporarily stopped. • Lights during video tape recording. [] Progressive scanning mode. [] Timer recording display. XP/SPiLP_LP 4DVDrecording modes. XP,SP,LPorSLPcanbeselected inturnbypressing theRECMODE_SPEED repeaedly. Q ÷ S P/SLP 2VCRrecording modes. SPorSLPcanbeselected inturnbypressing theRECMODE/SPEED repeatedly _CD Appears when a CD is inserted.
!!_ %ii_ ¸, rts and functions Remote Page contro_ OPEN/CLOSE Opens or Closes the tray. EJECT Ejects the cassette tapes 33 PROGRESSIVE Activates the progressive TV/VIDEO Select to operate TV/VIDEO ON/STANDBY 0-9 Turns power on/off. Direct channel selection of TV 48 scanning mode. 47 22, 55 22 54 Setting input 37, 74 Entering a password INSTANT REPLAY 25 Repeats playback between the section played 10 seconds before and present section.
Open the battery compartment cover in the direction of the arrow. install two "AAA" batteries, paying attention to the polarity diagram in the battery compartment. Replacethe compartment cover. =_ o,£. Caution: Never throw batteries into a fire. Notes: • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.
tenna connections tf you are using an antenna system, follow these instructions, _fyou are a CabmeTV subscr}ber, to page 18 for the proper connections, IANTENNA TO DVD/VCR CONNECTION sk}p ahead I The DVD/VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna system to a DVD/VCR.
_i!ii _' _ii_'iiiiiii _ tenna IDVDiVCR connections TO TV CONNECTION I After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram. This DVD/VCR has a single 75 ohm output for connection to a TV.
ble TV connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a speciat channel which is scrambled, you must have a descrambler box for proper reception.
bm .......e TV connections iMPORTANT: Make sure the TV/CABLE menu option is set to the "CABLE" mode, This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system.
_!i,__,i_ . nnectJons with the TV or audio component The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent on the model and features of each component. Check the Owner's ManuaI provided with each component for the location of video and audio inputs and outputs.
with the TV or audio component Connect to a stereo ampJifier with audio output Yea can enjoy high quality audio by connecting the audio output to your amplifier. Connect the audio output jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier.
clock setting / Setting the video channeH Auto c_ock setting Preparation: You must connect the antenna or cable before connecting the AC cord to the power source. Wait at least 3 minutes with the power turned off, after the antenna or cable is connected, for the auto clock feature to activate. After the clock is set automatically, you may have to set the time zone and daylight saving time. (See page 26.) Press ON/STANDBY to turn on the DVD/VCR after the auto clock operation completed.
• uP MENU The SETUP MENU consists of severam menus where you can make varieue settings cencerning men= guage, audio functions, and images, h addition, this menu incmudee a deck, channem and other things that require setting just after purchase, Per details of each menu, see the corresponding section in this chapter.
tting the tanguage You can choose the language of the menu screen, DVD menu, DVD audio and subt}tmes. Selectabte Janguages: ENGLISH, FRANCA_S, ESPANOL The language you have selected will play if it is recorded on the disc. Preparation: , Turn ON the TV and set it to the video input mode. , Select "LANGUAGE" from "SYSTEM SETUP". For the procedure, see steps 1 to 3 in "Using the SETUP MENU" on page 23. ORIGINAL The unit will select the first priority language of each disc.
tting the parentat control Some discs are specified as not suitabme for chiF dren, This unit can prevent pmayback of such discs, Preparation: Turn ON the TV and set it to the video input mode. Select "PARENTAL" from "SYSTE_,_ SETUP". For the procedure, see steps 1 to 3 in "Using the SETUP MENU" on page 23. AV'_T_P PARENTAL @H_ET_ _HEE O_ NOTES: • The selected level wiil apply to operations executed after this. • The unit cannot restrict playback of some discs.
tting the clock The clock is set to the correct but it can also for daylight be set manualmy. saving time time and time STANDARD automatically, The clock can be set TiME (Time zone) In the rare event that you live within the broadcast range of two stations in two different time zones, the DVD/ VCR may recognize the wrong station for the auto clock set. To correct the situation: zone. Preparation: . Turn ON the TV and set it to the video input mode. . Select "CLOCK" from "SYSTE_I SETUP".
g the disc You can format, NEW DUSC FORMAT protect, or finamize a disc, Preparation: • Turn ON the TV and set it to the video input mode= • Select "DISC SETUP" from "SYSTEM SETUP"= For the procedure, see steps 1 to 3 in "Using the SETUP MENU" on page 23= If you insert an unused DVD-RW disc, the disc is automatically formatted= If you use the DVD-RW (Ver.1.1/1.
tting the disc / Other SYSTEMSETOP NOTES: NOTES: During the finalization the cursor wi!l move repeatedly. When the finalization finished, "DISC HNALIZED" will appear. The finalization process may require a few minutes to about 1 hour according to disc type or the amount of free space on the disc. "You can record or edit a finalized DVD-RW (in VR mode) by cancelling the finalizing, but you cannot do these operations with a DVD-RW (Video mode), or with a DVD-R.
4;!;;¸#_ . tting the screen This section describes settings about the screen. Preparation: • Turn ON the TV and set it to the video input mode. • Select "AV SETUP 1" from "AV SETUP". For the procedure, see steps 1 to 3 in "Using the SETUP MENU" on page 23. Note for the field still and frame still: (with 480i interlaced scanning mode) • Field* still (240 lines) Since only one field (half of the video information) is shown on the TV screen, the picture appears rough but does not shake.
4,, _,,,,_ ° ttmng the image quatity / Setting This section describes image quamity settings. This section Preparation: , Turn ON the TV and set it to the video input mode. , Seiect "AV SETUP 2" in "AV SETUP'L For the procedure, see steps 1 to 3 in "Using the SETUP MENU" on page 23. SY_M _ETUP ............ _v SETUP the audio describes audio settings. Preparation: • Turn ON the TV and set it to the video input mode. • Select "AUDIO" from "AV SETUP".
ng the audio / Setting the recording SAP (Second Audio AUTO CHAPTER Program) This unit is fitted with an SAP broadcast system that enables you to switch to a second audio program while viewing a selected channei. This function applies only when the program is broadcast in multiple languages through the SAP broadcast system. Select "SAP" and select "ON" to use SAP, and to not use it, select "OFF".
tting the channel / Setting This DVD/VCR is equipped with a channem memory feature that allows you to skip channels up or down to the next channel set in memory, hence skip over unwanted channels. other items You can set the switching intervambetween pmayed back images in the slide show mode. Preparation: • Turn ON the TV and set it to the video input mode. • Select "OTHER". For the procedure, see steps 1 to 3 in "Using the SETUP MENU" on page 23.
ayback procedure p+o,o,+o,,: + Turn ON the TV and set to the video input mode. . Press DVD to select the DVD mode+ (The DVD indicator will light+) Press OPEN/CLOSE. The disc tray will open. 2 NOTES: + If a non-compatible disc is loaded, 'qNCORRECT DISC", "REGION CODE ERROR" or "PARENTAL ERROR" will appear on the TV screen according to the type of loaded disc.
by selecting i!!ii;iiii!i:i!!ii !iiii ili!ii!ilil li,iiii!ii iii! When pmaying back a recorded disc, you can display the title menu and eemect the title to be a title Preparation: • Turn ON the TV and set to the video input mode= • Load a recorded DVD= • Press DVD to select the DVD mode. (The DVD indicator will light.) pmayed beck.
_iiii_ ¸×__ o . ecKlng media information Various information on the Beaded disc can be dispmayed on the TV screeno Preparation: , Turn ON the TV and set it to the video input mode. , Load the disc, , Press DVD to select the DVD mode. (The DVD indicator will light.) Press DISPLAY= Media information will appear. O present 2 chapter number Press D_SPLAY while the media information The next media information will appear. -_ ÷ above is displayed.
eclat" playback Fast forward NOTE: There lay between may be a slight depressing the button and the function activation. playback Press SEARCH _ during normal playback, Each press of SEARCH _ will increase the speed of the search I_1_ (x2), _ (x12), _ (x24), _ (x60). (The speed of the search is increased up to only 2 steps in Audio CD.) ,, To resume normal playback, press PLAY. Review playback Press SEARCH,_,_ during normal playback.
_stant skip / Locating a specific scene _nstant s._p Use this function to skip commercials while you playback. Press _NSTANT SKiP during playback. The time iumps to a point approx. 30 seconds later and playback resumes= NOTE: With some DVD-Video, the Commercial skip operation may not work. Locating a specific Specify the time recorded 1 scene on the disc, chapter or title to pmayback, ° Press PLAY NODE= The play mode screen will appear.
peat playback instant repmay This feature can be used to repeat the mast 10 seconds material, and continues to pmayas normal of viewed Press INSTANT REPLAY during playback. The video returns to a point 10 seconds before and playback resumes. NOTES: • If the time from the title top is less than 10 seconds when _NSTANT REPLAY is pressed, the title top is repeated and then the video is played back. • With some DVD-Video, the one touch repeat operation may not work.
selection / OVO menu Title selection Two or more titles ere recorded on some discs. If the title menu is recorded on the disc, you can select the desired title. Press TOP _,IENU/TITLE MENU during playback. The title menu appears on the screen. , Press TOP MENU/TITLE MENU again to resume playback at the scene when you pressed TOP tt,IENU/TITLE fvIENU. Press i,/'!l' or '_ / • to select the desired title. Press ENTER. The playback of the selected title will start.
anging angles / Zooming / Karaoke playback ChaogJog aogm When playing back a disc recorded with muitFangle facility, can change the angle that you are viewing the scene from. you Press ANGLE during playback. The current angle will appear= i / _ ii ii ii ii ii _ ii i i Press ANGLE repeatedly until the desired angle is selected. Zooming This unit will allow you to zoom in on the frame image, You can then make selections by switching the position of the frame, Press ZOOM during playback.
_!i!i_!_ k angmg soundtrack language/ Subtitbs / To turn off the PBC Changing soun,Jtrao, mangu_g_ You can select the language when you play a multilingua! disc. Press AUDIO during playback. The current soundtrack language will appear. i! _L _ ii _ _ i _x !_ iiiiiiiiiiiiiiiii 2 Press AUDIO repeatedly until the desired language is selected. The on-screen display will disappear after a few seconds.
rious operations on CO This section describes the TRACK tNFO screen where music CDs can be pmayed back using the various operations. Preparation: , Turn ON the TV and set to the video input mode. , Load the music CD= , Press DVD to select the DVD mode. (The DVD indicator wilI light.) Press TOP MENU/TITLE The TRACK INFO screen appear.
jiiiii! iii_ ¸_¸ _ . on CO C nous operations Random playback Press • or to select "RANDOM PLAY" from the menu list and press ENTER. The order of music tracks is randomly changed. Press PLAY, Music is played back in random order. To cancet random playback, select "RANDOM PLAY" from the menu list again, and press ENTER. Repeat pJayback of selected track Press • or • to select the track number you want to repeat playback and press •.
P3/WMA/JPEG playback t_P3 and WMA files can be pmayed beck. Aieo_ you can dispmay JPEG flies on the TV screen and enjoy them as a elide show, Some discs may not pray due to the condition of the recording. Preparation: . Turn ON the TV and set to the video input mode= . Load the disc storing MP3, WMA or JPEG. . Press DVD to select the DVD mode= (The DVD indicator wilI light=) Using the BROWSER screen PressTITLE MENU. The BROWSER screen will appear= NpopAi _ =_ Grammya3 01 .rap3 ._ G_ammy03 o2.
'WMA/JPEG playback Ptaying back BaP3/WMA files Press • or to select MP3 or WMA file. . In case the disc includes more than 10 files, you can turn to the next or the previous page. (See page 42.) Gra_lmy03 02.t_p3 GrammyO303.mp3 Gr_mmyO304.mp3 Gram_yo_os.mp_ _rammyo3_BJ_p3 _rawn_yo3_7.t_p_ G ra Frd_yO3o8.m_3 O GrammVO3Og.mp_ MP3 CD • IVlP3 flies must have the extension letters ".mp3". • Standard, sampling frequency, and the bit rate: MPEG-1 Audio 32kHz, 44.
fd_ P3/WMA/JPEG playback Playing back JPEG files Press • or to select JPEG file. in case the disc includes more than 10 files, you can turn to the next or the previous page. (See page 42.) AJOJ_e4pg Ambas_adeurs-Ar_s_ide Al_s_de At t_e Brus_14_ Brua_t._pg _oulir_ _oug_4pg C!_W_ Ch_-U-Kan.jpg i _Hce_ lfied laS_ated.jpg Gu[_ le.jpg E_ Dorado.jpg G_el_e O Ja_e 2 65 CaHl_es.ir Avl_J-18_3._pg Carry out either of the item a or b below. a: Press ENTER. b: Press • to select "PLAY" and press ENTER.
C ogressiv÷ scan _i!ii,!_ii!:iii _ii_!ii!ii_!iiii_ _iiiiii_!iii_i_i!i;l _ii!ii!!!iiii!!i _iiiiiiiii_l The unit supports the progressive scanning system as well as the conventional intedaced scanning system, if your TV is equipped with corn= portent video input jacks which suppert the progressive video input, you can enjoy high quality picture by making the progressive scanning mode active, Preparation: , Connect to a TV equipped with component jacks which support the progressive video input.
adwng and unloading Use onJy video cassette tapes marked a cassette _ and S_HS tape • SQPB , Cassettes marked "VHS" (or "S-VHS" can be used with this video cassette recorder However, S-VHS recording is not possible with this model. , This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to playback S-VHS recordings with regular VHS resolution. , HQ VHS is compatible with existing VHS equipment.
ssette tape playback Preparation: , Turn ON the TV and set to the video input mode. , Press VOR to select the VCR mode. (The VCR indicator will light.) Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically). 2 To ÷ ÷ To rewind the tape or forward it rapidly Press STOP. NOTES: • This VCR selects the playback tape speed SP, LP or SLP automatically= • A cassette tape and DVD disccan be played back simultaneously.
eciat ptayback Repeat Picture search Reverse picture search function Press REW x 1 or x 2 during the playback. Forward picture search function Press RFWD x 1 or x 2 during the playback. To return to playback: Press PLAY. Press REPEAT while the VCR is playing back. By pressing REPEAT each time, "REPEAT ON" or "REPEAT OFF" is selected in turn.
RETURN function ZERO RETURN function / Video index search system The counter disptay shows the tape run- !!i: tape position= The counter display wiII be reset to the "00:00:00" position (e=g=the be- H_F! 0 roco This function makes tape rewinding step at the counter "00:00:00" position automatically, ginning ofrecording [ j Press STOP when playback OF recording is finished= Press ZERO RETURN= The tape will be rewound or fast forwarded and automatically at the "00:00:00" position.
iiii!!/ 7 j .!_I!I: .
this before recording The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability, images on disc that cannot be recorded Some DVD-Video and broadcasts contain copy-restriction signals to protect copyrights, There are 3 types of copy-restriction signals: "Copy Free", "Copy Never" and "Copy Once", "Copy Free"
/ i!il!_; /,, /' ./ / .....
g a TV program Press STOP tostop recording. seconds." []" wilI appear on the screen for about 4 NOTE: When recording onto a DVD, even if STOP is pressed during recording, recording does not stop instantly. Recording may continue for as long as 1 minute maximum. To stop recording temporarily VCR mode unwanted mater a, " till" will appear on screen for about 4 seconds. Press again to resume recording.
neotouch Timer Recording _iii!_i_!i!!iiiii iiii;i;i!!!i!i!!ili!ii!i iiii_!iiiii!iiii!_!!ii _iiii_!iiiiii _i_i'i_ii_ The One-touch Timer Recording feature provides a simpme and convenient way to make a timed recording, (OTR) Preparation: Turn ON the TV and set to the video input mode. Load a recordabie DVD or video tape into the unit. Press DVD or VCR to select the appropriate mode. Example: One-touch Timer Recording for 30 minutes. Press REC MODE/SPEED VCR mode to select the recording mode.
_i_i!_ ¸¸¸_"20 recording Setting timer recording _iii_i!!ii!_!iii _iiiili!i!iii_i @!i_MiiiiiX!i_iii_ii_i @!iiiii!iil Preparation: The timer recording system allows you to select the date, time and channel and record the desired programs. Up to 12 timer programs within a month can be stored in this unit° , , , , Turn ON the TV and set to the video input mode. Load a recordabie DVD or video tape. Press [VD or VOR to select the appropriate mode. Confirm that the clock is indicating the correct time.
Ii1,, 7 / .
_i!;!i_ ¸ ;_'_, mer recording 11 12 13 Select "OK" and press ENTER. The timer program is determined screen appears again. and the TIMER REC SET When you enter the other program for the timer recording, repeat the steps 3 to 11. Press SETUP. The TIMER REC SET screen disappears return to the normal screen. and the display will O w= 14 ÷ Press TIMER REC.
ase Ptayback While recording a TV program on the DVD-RAM disc, press PLAY to start chase playback. The TV program as it is being recorded will played back. You can begin playback from the beginning of a program currently being recorded. You will find this function of great advantage on long programs, as you do not have to wait for the end of recording to begin playback. Locate a scene you want through the following operations if necessary= Still playback: Press PAUSE.
ereo recording and playback The VHS NFFi audio system permits high fidemity recording of MTS STEREO TV broadcasts.
_ii:i_ ii_iii i¸_¸ lting the disc THe section e×plains how to edit the recorded contents on DVDRWs. However, the items that you can edit vary with the recording formate. _n VR mode, you can edit various title menus, whereas in Video mode, you can edit onmy a few items. Title menu When the content is recorded, a title name that includes the date, time, channel number and other information is created automatically.
_i!i r_,J °o° l tng a piaytist You can create and edit the pmaymist based on the original titme, Preparation: • Turn ON the TV and set to the video input mode= • Load the recorded DVD-RAM/RW (VR)= • Press DVD to select the DVD mode. (The DVD indicator will light=) cr at ogapm y.st PressTITLE MENU= The title menu will appear= _,_ DiSC NAME: .... O to select the original title which will be used Press • OF base of a playlist. 3 ÷ as the Press p,. The editing menu of originaI title will appear.
_i y _ ninq a p_aytist u w_ w Press TITLE t_ENU to display the title menu. 2 Select the playlist where you want to change the title name. • Press • or • to select the playlisL • Press • to display the editing menu of the playlist. • Press • or • to select "RENAME THTLE". Press ENTER. The keyboard screen will appear. ÷ 4 Use the keyboard screen to enter the title name. !/_iii _II_ 5 Press DISPLAY to return the title menu. NOTES: , The title name can be a maximum of 64 characters.
_i! r_joo o rang a playtist Erasiog a scone(E_ittitle_ "Youcan erase an unnecessary scene from the created playlist. When you erase the scene from the playlist, the scene is not erased from the original titie. Press TITLE MENU to display the title menu. Select the , Press • , Press • , Press • playlist where a scene you want to erase is included. or • to select the playlist. to display the editing menu of the playlist. or • to select "EDIT TITLE'k i_i i _ DISC NAME: i_ _i _i _ ....
{ iting a p[ay[ist 5 Press • or • to select "SET START" at the start point of the scene that you want to erase and press ENTER. (To set the start point easily, search the start point while "SET START" is selected) The still image at the start point appears at the Ieft small screen. CHAPTER 2_3 00:!1:4'_ .... _r_ulga 6 Press • or • to seiect "SET END" at the end point of the scene you want to erase and press ENTER. The still image at the end point appears at the right small screen.
_iting a playtist combioiog thotitme "Youcan create a playllst by combining the several original titles or ptaylists= To combine the titles, it ls necessary to create a pIayIist at first. By combining the titles in the playllst, a playlist where several titles are combined is created. Press TITLE MENU to display the title menu. 2 Select the playlist where you want to combine the titles. . Press • or • to select the piaylisL . Press • to display the editing menu of the playtisL .
_iting a pl a yti st Erasing aplay.st You can erase the created playlist. Even if you erase the playlist, the original title will not be erased. Press T_TLE MENU to display the tit)e menu. 2 Select the piaylist that you want to erase. , Press • or • to select the playlist. , Press _ to display the editing menu of the playlist. , Press • or • to select "DELETE THTLE'L Q D_SC NA_E: .... Press ENTER. The selected playlist will be erased.
_i!i r_,J °o° rang an origina in VR mode, you items, whereas you can edit can edit in Video the title various mode, names only. title Preparation: • Turn ON the TV and set to the video input mode_ • Load the recorded disc. • Press DVD to select the DVD mode. (The DVD indicator will light.) Adding a chapter mark You can add a chapter mark to the original title. 'You can add up to 999 chapter marks to one disc. Press TITLE MENU to display the title menu.
_il _...... _!i_ lting an originat titte When the scene you want to add a chapter mark, press ENTER. The playback is paused and the position of the added chapter mark appears green. The added chapter mark If you want to continue to add chapter mark, repeat step 5. Adding chapter marks is finished. , To display the title menu, press RETURN. , To return to the normaI screen, press TITLE MENU. Combining chapters By erasing the added chapter marks, the chapters can be combined.
an originaJ title Press SKiP + or SKiP to select the chapter marks to be erased, Press ENTER, The chapter marks are erased and 2 chapters are combined into 1 chapter, 6 7 ÷ To continue erasing the chapter marks, repeat steps 4 and 5, The combining chapters will completed, * To display the title menu, press RETURN, * To return to the normaI screen, press TITLE MENU, m ¢ Changing 1 2 an origina_ title name Press TITLE MENU to display the title menu.
_ii:i_ ii_iii i¸_¸ _ting an origina_ title E_asiog ascene (E_ittit_÷_ "You can erase an unnecessary scene from the original title_ Erase the scene after checking the title. You cannot restore the erased scene. When you erase the scene, you can increase the disc space. Press TITLE MENU to d_sp_aythe title menu. 2 Select the cluded. , Press • , Press _ , Press • original title where a scene you want to erase is inor • to seiect the original title. to display the editing menu of original title.
_+_i+i r_°+ o rang an originat titte Eras+n+ aoor+++na+ t+t+e "YOUcan erase an original title+ Erasing the title deletes both the title and the recording saved under that title name. Erase the original title after checking its title+ The erased title cannot be restored. When you erase the title, you can increase the disc space. Press T_TLE MENU to display the title menu. 2 Select the original title you want to erase. + Press • or • to select the original title.
anging a disc name You can change a disc name from the title menu, Preparation: , Turn ON the TV and set to the video input mode, , Load the recorded DVD disc, , Press DVD to select the DVD mode. (The DVD indicator will light.) Changing a disc name }:); Press TITLE MENU to display the titie menu. to select"DISC NAME". , Press • or , Press _, to display the editing menu. , Press • or • to select "RENAME DISC". 3 ÷ ÷ Press ENTER, The keyboard screen wiII appear.
ging a disc name Using the keyboard screen This section explains the function of the keyboard screen and how to input characters. The disc name and the titie name can be changed using the keyboard screen. Character input 2 Example: Explained here is the procedure when you input "F" and "J". Press the numeric keys continuously the character to be input. Keyboard screen types The keyboard screen has three types of "Letters", "Numbers" and "Signs". The type can be switched over by pressing REW or F.FWD.
ing a disc name Erasing a character "Youcan erase the input character, Press • or to select the type of letters Jnthe list below and press ENTER. Erasing method Auto saps: Press A 1 V, • or • to select "Back". Upper: Lower: Press ENTER. The last input character wiJJbe erased. Determining a name To determine the entered disc name and title name, press D_SPLAY. Or, press •, •, • or • to select "OK", then press ENTER. To erase the characters continuously, press ENTER.
bbing a tape onto a disc iiiiii!ii!!i!ii iiiiiiiiiiiiii:il;ii :iiii iJi;,i i:iiii i i!:ii!i i:iiii!iiii You can record video or audio on a video tape onto a disc. Preparation: • T_JrnON the TV and set to the video input mode. • Load a source video tape and a disc for recording. • Remove the erase protection tab of the source video tape to prevent the data from accidenta!ly being erased. • Confirm the disc space before operation.
bbing a disc onto a tape illi!i!iii!!ii iii i!!i:! !i ii!iil;t itliii!iii!!iii iiii !,i:iiiii;;ili ii:ii You can record both video and audio from a disc to a video tape= When a disc with a copy guard is used_ a distorted image is recorded onto the video tape, Preparation: . Turn ON the TV and set to the video input mode. . Load a source disc and a video tape for recording. . Confirm the remaining tape for recording before operation. Press VOR to set this unit to VCR mode. The VCR indicator will light.
bbinq using other equipment You can connect another VCR or camcorder to dubbing. Typical connection: When using this unit as a recording device Playback VCR To Video OUT--_x_--To / AUDiO/VIDEO Audio (R) OUT Recording VCR "To Audio (L) OUT mj [_ cord (supplied) Recording °°/ VCR . J ..... Te 'Video _N--0Q%._-- To Audio (R)IN 1[ T }_,.. _._ "To Audio (L) _N AUDIO/WDEO ., cord (not supplied) You can also connect to the audio/video input jack (L1) at the rear side of this unit.
DTS This is a digital sound system developed by Digital Theater Systems for use in cinemas. This system uses 6 audio channels and provides accurate sound field positioning and realistic acoustics. (By connecting a DTS Digital Surround decoder, you can aIso listen to DTS Digital Surround sound.) A-B Repeat Pmayback Playback that repeats between two set points, A and B.
parental controm settings Level 1 : Adult discs and general discs (R-rated discs included) cannot be played back. Level 2 to 3: Adult discs and R-rated discs cannot be played back. Level 4 to 7: Adult discs cannot be played back. (Level 4 to 7 discs contain content children age 15 and younger may not see.) Level 8: AII discs can be played back without restriction. PBS Acronym for Public Broadcast System. The PBS channel transmits data for auto clock setting.
e code tist Enterthe appropriate code number for the initialsettings "DVD MENU","AUDIO" and/or "SUBTITLE" (see page 24).
4iii_ii ¸ _ oblems and troubleshooting Use the following check list for troubleshooting when you have problems with your unit, Consult your local dealer or service outlet if problems persist, Be sure aII connections are properly made when using with other units. F SYMPTOMS DVD/VCR does not operate. , , o , , , , Make sure the power cord is plugged in. Try another AC outlet. Power is off, check fuse or circuit breaker. Unplug unit, then plug it back in. Select the DVD or VCR mode before operating.
obmemsand troubmeshooting SVMPTO. S i TV recordingdoes notwork, POSSIBLE SOLUTIONS I _ The erase preventiontabofthevideocassetteisbroken offi 148,54 ._ The unit is in the external input mode. . The time is not set correctly. 2126 Timer recording Noise bars on screen. does not work. ÷ / Video head cmeaning TIMER REC has not been pressed ([] is not lit). 59 . Tracking adiustment beyond range of automatic tracking circuit. 50 Try Manual tracking adiustment .
Jrning message r ERROR/WARNING Power MESSAGE CAUSE ON SYSTEM PLEASE The power termination connection nation) ERROR WAIT SYSTEM ERROR PLEASE WAIT DISC CHECKING Playback was abruptly ing to the disc The data turned off before writ- restoration When a disc was was pressed, NO DISC A disc specified CODE INCORRECT C106, C 107 ERROR DISC ALL" was - C104, C105, The disc was completed, not loaded other than "Region cannot PROCESSING PLEASE WAIT The recording CANNOT INTERRUPTED RECO
GENERAL Power supply: Power consumption: Weight: Dimensions: Operating temperature: Operating humidity: Inputs/Outputs: Video: Audio: Antenna: VCR section Video head: Audio track: Tuner: ÷ RF channel output: RFWD/REW Time: Hi-Fi frequency response: Hi-Fi dynamic range: DVD section Signal system: Applicable disc: Recording format: Recording discs: Recording time: (based on a 4.
Limited United States Warranty DigitaJ Audio Video ("DAV") Product o Depot Repair Warranty Toshiba America Consumer Products, EL.C. ("TACP") makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A.
( Rmited warranty How to Obtain Warranty Services If, after following all of the operating (continued) instructions THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE _NTHE U.S.A. SOME STATES OFTHE U.S.A. DO NOT ALLOW UMITATmONS ON HOW LONG AN _MPLIED WARRANTY LASTS, WHEN AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR UMmTATION OF mNCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCU_4STANCES.
