_n }6V61
SAFETY PRECAUTIONS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NUT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING AO'/ERTENCIA RIESGO I0_ DIE_CAROA ELI_CT_CIA. _ ABRIR WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. //_ _THIS The lightning symbol in the triangle tells you that the voRage inside this product may be strong enough to cause an electric shock.
A polarized alternating current line plug -- having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable A product and cart combination should be moved with care. Quick stops, excessive force, and URn/on surfaces may cause the product and cart combination to overturn. to insert the plug into the outlet, try reversing the plug. Un enchufe de lloea de corriente alterna polarizado -- posee una cuchdla m_s ancha que la otto.
SERVICE / SERVICIO DE REPM_CION Da.ma_ R,_luidug,%n'ioe-- Unplug the TV setfrom thewall outlet and refer servicing to qualified service personnel under the following conditions: Dafios que requieren €1scrvicio de reparacidn-- En los casos siguiemes, de_enchufe d televisor de h toma de h red y solicite los servlclos de peTsonalde reparaci6nespeclali_ado: a. When the power cord or plug is damagedor frayed. a. Cuando se haya dafiadoel cable de alimentacidn o €1enchufe.
Welcome to Toshiba .............................................................................................................................. Exploring your new _ ............................................................................................................................... Selecting a location for the TV .................................................................................................................... Connecting your TV ...........................................
Watching picture-in-picture (PIP) ............................................................................................................. 22 Switching the main and small pictures ................................................................................................ 23 Changing 23 the position of the small picture .......................................................................................... Freezing the small picture ......................................................
Welcome to Toshiba Congratulations! You have purchased one of the finest color TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. Please make sure you've received the following items: TV, remote control, batteries, manual, registration card, and extended service plan literature.If you did not receive all of the items, or any of the items are damaged or broken, please contact your Toshiba dealer.
Connecting your "IV If you haven't connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.) • A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use "F" connectors. • Audio and video cables are usually color coded according to use: yellow for video and red and white for audio.
Connecting a cable converter box This connection allows you to watch cable and premium channels. You should keep your TV selected to ANT-I so that you can use the TV features. When viewing premium channels, select ANT-2 and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels. You will need two coaxial cables.
Connecting a DVD/satellite receiver and a VCR This connection allows you to watch DVD/satellite, video and TV programs. You can record from the DVD/satellite receiver and TV,, as well as record one TV channel while watching another channel. You will need: • one coaxial cable • three pairs of audio cables (only one cable for a mono VCR) • two video cables • one S video cable Caution: You can use a video cable instead of the S-video cable, but the picture quality will decrease.
Caution: To play from the DVD, the DVD and TV must use ColorStream connections. Torecord from the DVD, the DVD and TV must select Video. Connecting two VCRs This connection allows you to record from one VCR to another VCR while watching a video program. You will also be able to record from one TV channel while watching another channel. You will need: • one coaxial cable • two pairs of audio cables (only two cables for mono VCRs) • two video cables Caution.
Connecting This connection a camcorder allows you to watch video materials recorded on a ¢.amcordeL Caution: ff you are using a S-VHS camoorder with a S-video ou_ou_ connect this to the S-video input on the TF and remove the video cable.
Using the remote control Preparing the remote control for use Note: With the remote control, you can operate your TV, most VCR models, and cable TV converters together, even if they are different brands. If you will be using your TV with a Toshiba VCR, your remote control is already programmed and ready to use. If you own different brands of VCRs and/or converters, you first have to program your remote control. (See "Programming the remote control for use with a VCR or a cable TV converter" on page 8.
Programming the remote control for use with a VCR or a cable TV converter Recall POWER This remote control is pre-programmed to operate Toshiba VCRs. To use VCRs or cable converters other than Toshiba models, you must follow the steps below before you operate your remote control. 1. Refer to the "VCR code table" or "Cable "IV converter code table" on pages 9-10 to find the number that corresponds to the brand name of your VCR or converter.
VCR code table Brand name Code number Adventura Aiko Aiwa Akai 019 297 019 060, 068, 080, 125, 261 American High Asha Audiovo× Beaumark Bell & Howell Brandt Broksonic Calix Canon 054 259 056 259 123 206 140, 203, 230, 314, 380 056 054 Capehart Carver CCE Citizen Colt 039 100 091,297 056, 297 ' 091 Craig Curtis Mathes 056, 066, 091,259 054, 060, 079 Cybernex Daewoo 259 039, 064, 297 Daytron Dynatech Elect rohome 039 019 056 Electrophonic Emerex Emerson Fisher 056 051 019, 080, 227, 297, 498 0
Gemini General Instrument Gold Star Hamlin Hitachi Hytex Jasco Jerrold Macom Magnavox Memorex Movietime NSC Oak Panasonic Paragon Philips 034, 030, 059, 028, 292 030 026 172 022, 034, 052 046 019 175 089, 026, 019, 089 295 163 039, 053, 278, 030, 031,033 066, 295 175 038, 267 040, 126 Pioneer Popular Mechanics Pulsar RCA 019 044,046, 047, 048, 049, 050, 172 042, 163, 552 419 019 040 Regal Recoton Regency Rembrandt Runco 039, 278, 292 419 021 030, 089 019 Samsung Scientific Atlanta Signal Signature
Learning about the remote control POWERturns the TV on and off (pages 8 and 26) Recall -- ln/tviaeo selects video input source (page 26) Clhannel• • cycles through programmed channels (page 13) W/Cable/VCR switches between TV, Cable and VCR (page 8) Channel Numbers Channel Numbers allow direct access to channels (page 14) Volume• • adjusts the volume level Channel Returnreturns to the last viewed channel (page 15) Return Menu allows access to programming menus (page 12) Fu_mdteChannels • • cycle
Setting up your TV After you've installed the batteries and programmed the remote control, you need to set some preferences on the TV using the menu. You can access the menu with the buttons on your TV or by using the remote control. • When you make a menu selection, your changes occur immediately; Youdo rtot have to press MENU or EX!T to see your changes, • After fifteen seconds, the menu screen will automatically disappearif yon do not make a selection. Your changes will still be saved.
To select the antenna input: 1. Press the ANT/VIDEO button. The signal source you are connected to is displayed in purple. I Ant/Video Note: 2. Press the button until ANT 1 or ANT 2 is displayed in purple, indicating the antenna terminal you wish to use. Adding channels Video 3 is only available on model CZ36V6L to the TV's memory Your TV will stop on specific channels that are stored in the TV's channel memory when you press Channel • or v.
Adding and erasing channels After you've programmed channels. manually the channels, you can add or erase specific To add or erase channels: 1. Select the channel you want m add or erase using Channel • or v. If adding channels, you must select the channel to add by using the Channel Number buttons. 2. Press MENU, then press • or • to highlight 3. Press • or • to highlight Enter the SET UP menu. ADD/ERASE. Channel Number 4. Press • or • to select ADD or ERASE, whichever function want to perform.
Using the TV's features Adjusting Switching the channel between settings two channels You can switch between two channels without entering an actual channel number each time. • O0 Channel Number To switch between two channels: 1. Select the first channel you want to view. 2. Select a second channel with the Channel Number buttons 100). (0-9, Channel Retum 3. Press CH RTN. The previous channel will be displayed. Each time you press CH RTN, the TV will switch back and forth between the two channels.
To dear your favorite channels: 1. Select a channel you want to dear. 2. Press MENU, then press • or I_ to highlight 3. Press • or • to highlight FAVORITE the SET UP menu. CH. 4. Press • or • to display the FAVORITE CH menu. SET/CLEAR Channel Number will be highlighted. Menu/Enter TA 41b 5. Press the • or • to highlight CLEAR. Exit Favodte Channel vA 6. Press ENTER to erase. unt'l '0" replaces the channel number you want 7. Press EXIT to dear the screen. 8.
3. Press to • or • display the V-CHIP menu. 4. Use the Channel Number buttons (0-9) to enter your PIN code. If you are accessing the V-Chip menus for the first time, select°a four-digit number to be your PIN code. Press ENTER. The BLOCKING menu appears. Note: ff you forget your PIN code, press RECALL four times vd_in five seconds from _TeV-CHIP menu. Thisallows you to proceed to _e BLOCKING menu and reset your PIN code. 5.
MPAA Ratings X NC17 R PG13 PG G For adults only. Not intended for anyorie !7 or under. Restricted. Under 17 requires an accompanying parent or adult guardian. Parentsstrongly cautioned. Some material may be inappropriate for children under 13, Parental guidance suggested. Some material may not be appropriate for children, General audience. Appropriate for all ages. Youth "IVRatings Y7, Y7 FV Directed to older children. This program is designed for children age 7 and above.
To use the V-Chip to block programs by rating: 1. Press MENU, then press • or • to highlight the SET UP menu. 2. Press • or • to highlight V-CHIE 3. Press • or • to display the V-CHIP menu. 4. Use the Channel Number buttons (0-9) to enter your PIN code. If you are accessing the V-Chip menus for the first time, select a four-digit number to be your PIN code. Press ENTER. The BLOCKING menu appears. Channel Number Menu/Enter _A 4_ Exit 5. Press • or • to highlight ENABLE BLOCKING.
Blocking unrated movies or programs Some movies and programs arenot rated. You can block these movies and programs using the V-Chip. To block unrated movies or programs: 1. PressMENU, then press • or • to highlight the SET UP menu. 2. Press• or * to highlight V-CHIE 3. Press • or • to display the V-CHIP menu. 4. Use the Channel Number buttons (0-9) to enter your PIN code. If you are accessing the V-Chip menus for the first time, select a four-digit number to be your PIN code. PressENTER.
7. Press ENTER. 8. Repeat steps 1 through 7 to block other channels. When you are finished blocking channels, press EXIT to return to normal viewing. If you try to display a blocked channel, will display the nearest unblocked To unblock channels: 1. Press MENU, the TV will not display it, but Note: AfterprogrammingCHANNELBLOCK changechannelsbeforeturningoff me television. channel. then press • or • to highlight the SET UP menu. 2.
6. Press • to highlight LABEL. 7. Assign the label to the channel. Press • or • to enter a character in the first space. Press the button repeatedly until the character you, want appears on the screen. Press ENTER. 8. Repeat step 7 to enter the rest of the characters. If you would like a blank space in the label name, you must choose an empty space from the list of characters. Otherwise, dash will appear in that space. 9. Press EXIT to clear the screen. 10. Repeat steps 1 through 32 labels.
To display a picture from an external source as a small picture: 1. Make sure you have connected the external source equipment properly. For more information, see the "Connecting your TW' on page 2. 2. Turn on the TV and select the program you want to watch. 3. Press the PIP button once to display a small picture. A window 1/9 the size of the screen will appear. Press PIP a second time to display a 1/16 size window.
Freezing the small picture Press STILL while you are watching a small picture. The small picture will become a still picture. To return to the moving picture, press STILL again. Watching multi-window Multi-window PIP appears as six small boxes across the bottom screen. You must program channels channels automatically).
Adjusting Adjusting the picture the picture quality You can adjust the picture quality including the contrast, brightness, qualities you choose will be stored memory so you can recall them at to your personal preferences, color, tint, and sharpness. The automatically in your TV's any time. • • VA Menu To adjust the picture quality: 1. Press MENU, menu. then press • or • to highlight the PICTURE Menu/Enter TJ, 41_ 2. Press • or • until the item you want to adjust is highlighted. 3.
Adjusting the picture preferences You can select your desired picture type from three preset picture modes: Normal, Theater, and Memory. To select the picture preferences: 1. Press MENU, then press • or • to highlight PREFERENCES menu. 2. Press • or • to highlight PICTURE the PREFERENCES. 3. Press • or • to highlight the mode you want. The table below describes the effects of the different preferences.
Using the closed caption feature You have two options with the closed caption feature: captions or text. A caption is a printed version of the dialogue, narration and/or sound effects ofa TV program. Text is information not related to the program that appears on half of the TV screen. To view captions or text: 1. Select the desired program. The captioned programs are usually marked in your local TV listing by "CC." 2. Press MENU, then press • or • until the C.CAPT menu appears.
Adjusting the sound Muting the sound Mute Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display the word MUTE in the lower tight-hand corner. To restore the sound, press MUTE again. When you press the MUTE button, you automatically activate the closed caption feature. To deactivate this feature, press the MUTE button again. This feature only works when the closed caption mode is set to off. See =Using the closed captioned feature" on page 27 for more information.
Adjusting the sound quality You can change the sound quality of your TV by adjusting treble, and balance. the bass, To adjust the sound quality: 1. Press MENU, then press • or • until the AUDIO menu appears. 2. Press • or • to highlight the item you want to adjust. Note: 3. Press • or • to adjust the level. To reset the audio adjustments to the factory settings, select RESET from the PICTURE menu.
Viewing the demonstration mode The demonstration mode (DEMO) is an option available on the SET UP menu. If you select this mode, the "IV will demonstrate several of the TV's features. To stop tb.e demonstration mode: Select DEMO STOP in the SET UP menu, or press the RECALL, EXIT, or POWER buttons. Understanding the last mode memonj feature If the power is cut off while you are viewing the TV and the power is resupplied, the last mode memory feature will turn theTV on automatically.
Appendix Cleaning and care WARNING: 73/setsuse high voltage.Do not try to removethe cabinetback. Refersen4c_ng to qualifiedservicetechnicians. To clean the TV screen: I. Unplug the TV to avoid possible shock hazard. 2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean the TV screen and trim. Do not use too much water because water spills into the cabinet can cause damage to the TV. 3. Wipe offany excess moisture with a clean dry cloth. 4.
Poor color or no color • The station may have broadcast difficulties. Try another • Adjust theTINT and/or COLOR in the PICTURE channel. menu. • If you change the direction of the TV while it is turned on, the picture could suffer from color shading. If so, turn off the TV and allow it to cool down for several hours before turning it on again. No stereo or SAP sound from a known MTS broadcast • Make sure the MTS feature is set properly.
Limited United States warranty Toshiba America Consumer Products, Inc. ("TACP') and Toshiba Hawaii Inc. ("THI') make the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
Authorized TACP/THI service station personnel will come to your home when warranty service is required. Depending on the type of repair required, the service will either be performed in your home or the set will be taken to the TACP/THI Authorized service station for repair and returned to your home at no cost to you. In the Continental U.S.
Index color temperature, adjusting ........................................... 25 connecting adding and erasing channels manually ..................... 14 audio amplifier ................................................................... 6 adding channels to the TV's memory .......................... 13 cable converter box ......................................................... 3 adjusting cable converter box and a VCR .................................. 3 channel settings ................................
picture-in-picture pIP) changing the position of the small picture ..........23 freezing the small picture ............................................ 24 main and small pictures, switching ......................... 23 watching ............................................................................. 22 watching multi-window ............................................... 24 PIN code, selecting ............................................................. 16 power, auto off .............................