User's Manual Part 3

Settings
82
Settings
You can choose a preferred one by tapping the
Find Network button.
Network selection - By default, the Network
selection field is set to Automatic. If you select
Manual, you will need to wait for the phone to
search for all available networks. You can then
select one to register to.
Set Networks button - Tap this button to
display the list of Preferred networks. You can
press the Move Up and Move Down buttons to
arrange the order of the networks.
4. Tap ok.
Mode settings
To select a network mode:
1. From the Today screen, tap Start > S
ettings.
2. On the Personal tab, tap Phone.
3. Tap the Mode tab and select the mode from the
following list:
- Automatic - selects network mode
automatically.
- HSDPA - selects 3G network mode.
- GSM - selects 2G/2.5G network mode.
4. Tap ok.
Configuring channels
To configure the channel settings:
1. From the Today screen, tap Start > S
ettings.
2. On the Personal tab, tap Phone.
3. Tap the Channel tab, then tap the Channels
button.
4. Select the required channels from the list.
G910-G920_UM_EN.book Page 82 Friday, November 9, 2007 2:02 PM