CCD Color Camera GiantDragon Color series CSGV90CC3 CSGX36CC3 CSGS20CC2 CSGU15CC18 Instruction Manual Thank you for purchasing our product. Before using this CCD Color Camera, please read through this instruction manual carefully in order to use this product correctly and safely. After reading, keep this instruction manual handy so that you can refer to, whenever you need it. Contents Safety Precautions 1.
Safety Precautions Before using this product, read these safety precautions carefully. Important information is shown in this Instruction Manual to protect users from bodily injuries and property damages, and to enable them to use the product safely and correctly. Please be sure to thoroughly understand the meanings of the following signs and symbols before reading the main text that follow, and observe the instructions given herein.
[General Handing] WARNING Unplug ! Stop operation immediately when any abnormality or defect occurs. If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign matter, or if the equipment is dropped or malfunctions, fire or electric shock may result. Be always sure to disconnect the power cable from the wall socket at once and contact your dealer. ! Do not use the equipment in locations subject to water splashes. Otherwise, fire or electric shock may result.
[General Handing] CAUTION Instruction ! Observe the following when installing the equipment: · Do not cover the equipment with a cloth, etc. · Do not place the equipment in a narrow location where heat is likely to accumulate. Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire. ! Do not place the equipment in locations subject to high moisture, oil fumes, steam, or dust. Otherwise, fire or electric shock may result.
CASES FOR INDEMNITY (LIMITED WARRANTY) We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in the following cases. ! In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party, deliberate or accidental misuse by the user, or use under extreme operating conditions.
Notes on using this product ! Handle carefully Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause malfunctions. Further, do not damage the connection cable, since this may cause wire breakage. ! Environmental operating conditions Do not use the product in locations where the ambient temperature or humidity exceeds the specifications. Otherwise, image quality may be degraded or internal components may be adversely affected.
Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the take-back and recycling of this product, please contact your supplier where you purchased the product.
10 中华人民共和国 环保使用期限 环保使用期限标识,是根据电子信息产品污染控制管理办法以及,电子 信息产品污染控制标识要求(SJ/T11364-2006)、电子信息产品环保使用 期限通则,制定的适用于中国境内销售的电子信息产品的标识。 电子信息产品只要按照安全及使用说明内容,正常使用情况下,从生产 月期算起,在此期限内,产品中含有的有毒有害物质不致发生外泄或突 变,不致对环境造成严重污染或对其人身、财产造成严重损害。 产品正常使用后,要废弃在环保使用年限内或者刚到年限的产品时,请 根据国家标准采取适当的方法进行处置。 另外,此期限不同于质量/功能的保证期限。 The Mark and Information are applicable for People's Republic of China only.
1. Overview This GiantDragon Color series is an integrated-(one-body)-type color camera that adopts all pixel data readout inter line CCD. There are 4 models according to the sensor type. These are CSGV90CC3 (VGA), CSGX36CC3 (XGA), CSGS20CC2 (SXGA), and CSGU15CC18 (UXGA). For video output, the Gigabit Ethernet®* interface standard “IEEE802.3ab” is adopted for high transfer rate, and it is easy to integrate into industrial equipment. * Ethernet® is a registered trademark of XEROX Corporation. 2.
! High-speed draft readout mode By thinning out vertical lines, it can be read all effective area at high-speed frame rate. ! Random trigger shutter The random trigger shutter function provides images in any timing by input of an external trigger signal. Trigger control from PC is possible. ! Scalable Selectable video output area. It can be higher frame rate by reducing vertical output area. And can be reduce occupied data rate of Gigabit Ethernet by reducing horizontal output area.
5. Explanation rear panel (1) Ethernet Gigabit Ethernet Interface connector - Connector model P65-P01-19V8 (Supplied by SpeedTech Corp.) - Pin assignment Pin No. I/O Function 1 I/O BI_DA+ 2 I/O BI_DA- 3 I/O BI_DB+ 4 I/O BI_DC+ 5 I/O BI_DC- 6 I/O BI_DB- 7 I/O BI_DD+ 8 I/O BI_DD- (2) (1) LED1 Rear View - Indication LED1: GREEN (ACT LED) LED2 LED1 indicates the state of ACT. During transfer: Lighting - Indication LED2: YELLOW (LINK LED) LED2 indicates the state of LINK.
6. Connection Connect this camera as shown in the figure below. (The figure below shows an example of connection. For details, contact our sales representative.) Option CameraCable CPRC3910-** Option CameraAdapter CA130C TRIGGER HD AC100VIN WEN CA13 0 C SERIALNo . VD CCD Color Camera GiantDragon (Rear-side) CAMERA VIDEO OUT CLOCK OUT TYPE2 23 2 A5 90 0 AC1 00 V 0 .
7. Functions Control and setting of functions can be done by the camera control based on the Gigabit Ethernet digital camera protocol (GigEVision Ver.1.00). (1) Image output A format of the output image and frame rate which this GiantDragon Color series supports is as follows.
(7) High-speed draft readout mode By thinning out vertical lines, it can be read all effective area at high-speed frame rate. * As for CSGV90CC3 (VGA), this mode supports a fault. CSGV90CC3 CSGX36CC3 CSGS20CC2 CSGU15CC18 Draft mode 1/3 1/2 1/4 Readout vertical line number 254 480 300 86 fps 34fps 46fps Maximum frame rate (8) Image resending control As the resending control of the image, this camera resends the packet which suffered a loss.
(10) Scalable mode This camera has the scalable mode that can read out defined area of the screen. Only continuous rectangle units can be selected, concave or convex shape cannot be selected. - Window size: {A x m(H)} x {B x n(V)} * A and B are minimum unit size. * m, n=integer * The image of maximum unit size or less can be selected. * Only one window can be selected.
8. Timing chart Image data outputs of this camera series are transferred with the UDP protocol of Gigabit Ethernet. Timing numerical value below is prescribed by absolute prerequisite that GiantDragon series use transmission band without restriction of other node. When there is a node transferring with GiantDragon concerned, it is not same the numerical value prescribed below.
(2) In the random trigger shutter mode - When fixed mode (Video format: RGB 24 bit, all pixel readout); TRIG_IN T3 Expose GbE bus Image T1 TDLY1 T2 - When pulse width mode (Video format: RGB 24 bit, all pixel readout); TRIG_IN T3 T4 Expose GbE bus Image T1 TDLY1 T2 Model name T3 [us] T4 [us] CSGV90CC3 0.9 2.8 CSGX36CC3 1.5 25.2 CSGS20CC2 3.4 5.1 CSGU15CC18 1.9 7.5 * The value of T1 and T2 are the same as the value at the of the normal shutter setting.
9. Troubleshooting If any trouble occurs in use, check the following first. If the trouble persists, contact your distributor or our sales representatives. * When user confirms the troubles, please confirms the troubles on the condition that user connected the camera system on the smallest composition and set 1500 byte / packet to the GVSP_SIZE (SCPSx) register for making cause of trouble clear. About the connection of the smallest constitution, please refer to 6.Connection.
10. Specifications [Electrical specification] (1) Imager All-pixel-data-readout interline transfer CCD CSGV90CC3 CSGX36CC3 CSGS20CC2 CSGU15CC18 692 x 504 1077 x 788 1434 x 1050 1688 x 1248 659 x 494 1034 x 779 1392 x 1040 1628 x 1236 640 x 480 1024 x 768 1280 x 960 1600 x 1200 Scanning area 4.88 x 3.66 mm2 4.81 x 3.62 mm2 6.47 x 4.84 mm2 7.16 x 5.44 mm2 (H) x (V) (1/3 type) (1/3 type) (1/2 type) (1/1.8 type) 7.4 x 7.4µm2 4.65 x 4.65µm2 4.65 x 4.65µm2 4.40 x 4.
(8) Gamma correction ON(Gamma = 0.65) /OFF(Gamma = 1.0) switching initial factory setting: ON * When Raw output mode(8/10bit), Gamma correction function is disabled (OFF fixed). (9) Masking correction ON fixed * When Raw output mode(8/10bit), Masking correction function is disabled (OFF fixed).
[Electronic shutter specification] ] (1) AE(Auto Exposure) - Effective range 1/20000s to Setting value of the frame rate - Effective area Full screen - Exposure level -1EV to +1EV (1/3EV step) * When the random shutter is active, AE function is disabled. * When Raw output mode (8/10bit), AE function is disabled.
[Machine externals specification]] ] (1) Dimensions 44mm(W) x 29mm(H) x 70mm(D) (Not including protrusion) (2) Mass Approximately 120g (3) Lens mount C-mount Notes on combination of C-mount lens: - Depending on the lens you use, the performance of the camera may not be brought out fully due to the deterioration in resolution and brightness in the peripheral area, occurrence of a ghost, aberration and others.
[Typical spectral response] ] The lens characteristics and light source characteristics is not reflected in table. 1.0 G Relative Responce 0.8 B 0.6 R 0.4 0.2 0.0 400 450 500 550 600 650 700 650 700 Wave Length[nm] 1.0 G Relative Responce 0.8 B R 0.6 0.4 0.2 0.
1.0 G B Relative Responce 0.8 R 0.6 0.4 0.2 0.0 400 450 500 550 600 650 700 Wave Length[nm] 1.0 G B 0.8 Relative Responce R 0.6 0.4 0.2 0.
11.
NOTE D4153660A
NOTE D4153660A
Head Office : 7-1, 4 chome, Asahigaoka, Hino-shi, Tokyo, 191-0065, Japan (Overseas Sales Department) Phone : +81-42-589-8771 Fax : +81-42-589-8774 URL : http://www.toshiba-teli.co.jp Distributor •This product must be classified for disposal according to the laws of each country and municipal laws. •Information contained in this document is subject to change without prior notice.
CCD Color Camera GiantDragon Color Series CSGV90CC3 CSGX36CC3 CSGS20CC2 CSGU15CC18 Specifications Contents CASES FOR INDEMNITY (LIMITED WARRANTY) RESTRICTION FOR USE Notes on using this product 1. Overview····································································1 2. Features ·····································································1 3. Configuration ····························································2 4.
CASES FOR INDEMNITY (LIMITED WARRANTY) We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in the following cases. ! In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party, deliberate or accidental misuse by the user, or use under extreme operating conditions.
RESTRICTION FOR USE ! Should the equipment be used in the following conditions or environments, give consideration to safety measures and inform us of such usage: 1. Use of the equipment in the conditions or environment contrary to those specified, or use outdoors. 2. Use of the equipment in applications expected to cause potential hazard to people or property, which require special safety measures to be adopted. ! This product can be used under diverse operating conditions.
Notes on using this product ! Handle carefully Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause malfunctions. Further, do not damage the connection cable, since this may cause wire breakage. ! Environmental operating conditions Do not use the product in locations where the ambient temperature or humidity exceeds the specifications. Otherwise, image quality may be degraded or internal components may be adversely affected.
! If the equipment is not to be used for a long duration Turn off power to the camera for safety. ! Maintenance Turn off power to the equipment and wipe it with a dry cloth. If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with diluted neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such chemicals may damage or discolor the paint and indications.
1. Overview This GiantDragon Color series is an integrated-(one-body)-type color camera that adopts all pixel data readout inter line CCD. There are 4 models according to the sensor type. These are CSGV90CC3 (VGA), CSGX36CC3 (XGA), CSGS20CC2 (SXGA), and CSGU15CC18 (UXGA). For video output and camera control, the Gigabit Ethernet®* interface standard “IEEE802.3ab” is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
(8) GenICam Ver 1.0 conformity This product is based on GenICam Generic Interface for Cameras Ver 1.0 that is industrial camera standard. Therefore, control of this camera is easy. (9) High-speed draft readout mode By thinning out vertical lines, it can be read all effective area at high-speed frame rate. (10) Random trigger shutter The random trigger shutter function provides images in any timing by input of an external trigger signal. Trigger control from PC is possible.
5. Functions (1) Setup-level setting You can set the pedestal in 192 steps in the range between 6.3 and 25%. (2) Gain setting There is AGC (Auto Gain Control) other than manual setting, too. Setting range and effective range are 0 to +6dB. (3) White balance There are two types of white balancing mode, MWB (Manual White Balance) and OPWB (One Push White Balance). You can set white balancing mode, according to the subject and purpose. (4) Gamma correction You can set gamma correction ON/OFF.
(8) Electronic shutter mode switching You can switch the shutter modes by adjusting the setting value of the command status register of the camera via the Gigabit Ethernet. The setting method has two kinds of the following. - AE (Auto Exposure) The brightness is adjusted automatically by the average photometry of the entire screen.
(9) Scalable mode This camera has the scalable mode that can read out defined area of the screen. Only continuous rectangle units can be selected, concave or convex shape cannot be selected. - Window size: {A x m(H)} x {B x n(V)} * A and B are minimum unit size. * m, n = integer, and the image of maximum unit size or less can be selected. * Only one window can be selected.
6. Specifications [Electrical specification] (1) Imager all-pixel-data-readout interline transfer CCD CSGV90CC3 CSGX36CC3 CSGS20CC2 CSGU15CC18 692 x 504 1077 x 788 1434 x 1050 1688 x 1248 659 x 494 1034 x 779 1392 x 1040 1628 x 1236 640 x 480 1024 x 768 1280 x 960 1600 x 1200 Scanning area 4.88 x 3.66mm2 4.81 x 3.62mm2 6.47 x 4.84mm2 7.16 x 5.44mm2 (H) x (V) (1/3 type) (1/3 type) (1/2 type) (1/1.8 type) 7.4 x 7.4µm2 4.65 x 4.65µm2 4.65 x 4.65µm2 4.40 x 4.
(9) Masking correction ON fixed * When Raw output mode(8/10bit), Masking correction function is disabled (OFF fixed). (10) White balance OPWB/MWB switching (initial factory setting: MWB) -OPWB (One Push White Balance) ・Effective range 2500 K to 6500 K ・Effective area Full screen * When the random shutter is active, OPWB function is disabled. * When Raw output mode (8/10bit), OPWB function is disabled.
[Electronic shutter specification] (1) AE (Auto Exposure) - Effective range 1/20000s to Setting value of the frame rate - Effective area Full screen - Exposure level -1EV to +1EV (1/3EV step) * When the random shutter is active, AE function is disabled. * When Raw output mode (8/10bit), AE function is disabled.
(5) Conformity cable Twist pair (Category 5e or over) (6) Cable length To 100m (at the Unshielded Twist Pair (UTP) cable using) (7) Recommended cable Oki Electric Cable Co., Ltd HONDA TSUSHIN KOGYO CO., LTD High bending resistance shielded Cat5e LAN cable * Because above recommendation cable is high bending resistance, maximum length of cable is 40m. * Contact your dealer / distributor for details of recommended cable.
[Connector pin assignment] (1) Gigabit Ethernet interface connector - Connector model (Camera side) P65-P01-19V8 (Supplied by SpeedTech Corp.) - Pin assignment Pin No. I/O Function 1 I/O BI_DA+ 2 I/O BI_DA- 3 I/O BI_DB+ 4 I/O BI_DC+ 5 I/O BI_DC- 6 I/O BI_DB- 7 I/O BI_DD+ 8 I/O BI_DD- (2) Connector for Power Supply and trigger signal input - Connector (Camera side) HR10A-7R-6PB(73) (Supplied by HIROSE ELECTRIC CO., LTD.
[Typical spectral response] The lens characteristics and light source characteristics is not reflected in table. 1.0 G B Relative Responce 0.8 R 0.6 0.4 0.2 0.0 400 450 500 550 600 650 700 650 700 Wave Length[nm] 1.0 G B Relative Responce 0.8 R 0.6 0.4 0.2 0.
1.0 G B Relative Responce 0.8 R 0.6 0.4 0.2 0.0 400 450 500 550 600 650 700 650 700 Wave Length[nm] 1.0 G B 0.8 Relative Responce R 0.6 0.4 0.2 0.
7. Timing chart Image data outputs of this camera series are transferred with the UDP protocol of Gigabit Ethernet. Timing numerical value below is prescribed by absolute prerequisite that GiantDragon series use transmission band without restriction of other node. When there is a node transferring with GiantDragon concerned, it is not same the numerical value prescribed below.
(2) In the random trigger shutter mode - When fixed mode (Video format: RGB 24 bit, all pixel readout); TRIG_IN T3 Expose GbE bus Image T1 TDLY1 T2 - When pulse width mode (Video format: RGB 24 bit, all pixel readout); TRIG_IN T3 T4 Expose GbE bus Image T1 TDLY1 Model name CSGV90CC3 CSGX36CC3 CSGS20CC2 CSGU15CC18 T3 [us] 0.9 1.5 3.4 1.9 T2 T4 [us] 2.8 25.2 5.1 7.5 * The value of T1 and T2 are the same as the value at the of the normal shutter setting.
8. Guarantee The term of a guarantee is 12 months after the product delivery. If by any chance trouble by responsibility of our company occurs before an above period, TELI repairs it free of charge according to a repair rule of Clause 9. During terms of a guarantee, when the trouble cause is the case of below, TELI charges the repair costs. - Troubles and the damages that causes by misuse, unsuitable repair or remodeling. - Distribution hazards like drops and vibrations after purchase.
10.
Head Office : 7-1, 4 chome, Asahigaoka, Hino-shi, Tokyo, 191-0065, Japan (Overseas Sales Department) Phone : +81-42-589-8771 Fax : +81-42-589-8774 URL : http://www.toshiba-teli.co.jp Distributor • This product must be classified for disposal according to the laws of each country and municipal laws. • Information contained in this document is subject to change without prior notice.