TOSHIBA Color Television. I OWNER'S MANUAL CF36G40 ....
Dear Customer Customer's Congratulation!! You h_£,,_urcl_sed finest Color TV's on the market! one of the You will find the model number and serial number on the back of your -FVset. This manual will help you use the many exciting and useful featuresto make-_viewing more enjoyable than. ever before. Before operating your TV set, please read all these safety and operating instructions then retain for future reference. Record completely and Record these numbers in the spaces provided below.
Table of Contents Set Up Advanced Operation Installing YoLir TV Set ....................................... Antenna/Cable TV Connection 3 ......................... 4 Preparation Using Closed-Captioned Locking Channels ............................................ Programming Location of Controls (-IV Set) ........................... Location of Controls (Remote Control) 5 ........... 6 Before Using the Remote Control .....................
Antenna/Cable TV Connection You can use either an indoor or outdoor antenna to receive VHF and/or UHF channels. Channels 2- 13 are VHF channels, and channels 14- 69 are UHF channels. We recommend using an outdoor antenna for better picture quality. You can receive Cable, TV by connecting a cable supplied by your local cable company. F-type connector (Not supplied) 75-ohm coaxial cable VHF, UHF or Cable 300_ohmiRwin_lead I _._ cable , Antenna oR.
Location of Controls (TV Set) For specific use of each control, consult the corresponding page numbers in brackets. . o Front view Rear view t- o_ o-- ,..> VIDEO/AUDIO terminals [24] ,/ >o .,Q t,_ £o -_ i VOLUME V/A buttons* TV/VIDEO button* [24] F_[_] _ - CHANNEL "/. I I I_L- T_','#IE)EO • VOLUME • L'-_- :__+ -- ADV button [8] [11] i--i iI • CH.k_E[• -/+ buttons [8] butt°ns ......
Location of Controls (Remote Control) For details o%,,_heUS e of each control, refer to pages in brackets. Aim at the remote sensor on the TV t SURROUND TV/VlDEO button* button TIMER button* [14] [24] [13] 2 3 7 8 _ _ 100 ., C23 _0 [8] buttons* C__7 _ [8] button* [12] CHANNEL _l,fV buttons ] VOLUME _i,/_ buttons CH RTN buttcn* J C.CAPT button* C_ i EDS • EDS button* RESET buttor* [22] TOSHIBA *These functions do not have duplicate locations on the TV set.
Before Using the Remote Control m 1 Place the Remote Control with the face down. Press clown on the ridged area of the battery cover and slide it off. F- Press and slide to remove. / 2 CAUTION: • Do not throw your batteries into a fire. Dispose of your batteries in a designated disposal area. • Do not combine used old batteries w'ith new ones. • Do not mix battery types.
Menu Function (General Instructions) We suggest you familiarize yourself with the procedure To adjust any TV feature, the use of the Menu function before using the Menu function. is required. The adjustments that can be made tothe TV appear on the screen. MENU _.IENLJ TV,'VIDEO ® • VOI.UME @®®00 _-- ADV-- • • CHANhEL button (on TV and on Remote) Each time you press MENU, the Picture, Audio, Setup or Option on-screen display is selected in order, then press ADV.
,P,'ogramming Channel Memory The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL • or • button. __rst, use the "I-V/CABLE and OH PROGRAM functions to preset all active channels in your area. If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into onl,! desired channels. 1 7/I° 1 Press POWER to turn on the TV. :cHANNE.-j-PO!ER 2 Press MENU repeatedly until the Setup menu is displayed on the screen.
Programming Channel Memory (Continued) After performing the CH PROGRAM function, specific channels. ......... + " -- you ('an add or erase t 1 Select the channel you want to erase using the CHANNEL • or • button, or select the channel you want to add using the Channel Number buttons. CHANNEL 2 Press MENU repeatedly until the Setup menu is displayed on the screen. •/i " T 3 Press ADV repeatedly until "ADD/ERASE" is displayed in magenta.
Watching TV Programs Press POWER to turn on the TV. To turn offthe 2 TV, press POWER again. 1 T\I 4 TV/VIDEC) 2 6@, Select a channel in one of the following two ways. • To scan the memorized channels in numerical sequence Press CHANNEL • to select the next higher channel. Press CHANNEL • to select the next lower channel. Press the button again to select the next memorized channels.
Convenient Remote Functions Press RECALL to display the following screen information for a few seconds. TIMER TIMER-- TVNIDEO RECALL 0 0, 2 3 MUTE MUTE RECALL • • • • Channel number VIDEO mode selected Stereo or SAP audio status Closed Caption or Text program on- status I STEREO SAP CAPTION TEXT T£ 4 Channel Number MENU-- CH RTN ADV A/T -/+ - EDS TOSHIBA Press MUTE to mute the sound. The word "MUTE" will be displayed on the screen as shown.
With the off-timer, you can set the-rv to turn off automatically after a pre-determined period of time (up to 3 hours, in 10 minute units). 1 Press TIMER to select the OFF TIMERhqode. I 2- Press two Number (0-9) - outtons to enter the iength of time you want - the TVto stay on after each number position starts to blink. Example: 3 OFF TIMER COO 1 Press EDS to display the following EDS (Extended Data Service) information for about 10 seconds.
Selecting Stereo/SAP Broadcasts The MTS (Multi-channel TV Sound) feature allows you to improve your TV viewing with high fidelity stereo sound. This TV also allows you to activate or deactivate the stereo surround sound effect. MTS also provides for an extra channel, SAP (Second Audio Program), used to transmit a seconc language or other audio information.
1 When the -IV receives a SAP broadcast, the word "SAP" .,;Green. is displayed on the Sq EREO SAP TV r Press MENU repeatedly until the Audio menu is displayed on the screen. 3- Press ADV repeatedly until "MTS" is displayed in magenta. If.a SAP broadcast in received, "SAP" displayed in y.&_/ow. 4 MTS [ STR ] SAP MONO =,: ....... | ....... il;.E ....... | ....... is TO SELECT ITEM PUSH ADV TO C(NNTRQL PUSH - + !3ress - or + until "SAP" is displayed in -nagenta.
Adjusting the Picture You can adjust the picture quality _IENU . TV_'ClDEO • VOLUME• e _9_€ (CONTRAST, BRIGHTNESS, SHARPNESS, Press MENU repeatedly until the Picture menu is displayed on the screen. • CHANNEL• 0 COLOR and TINT) to suit your taste. 0 2 Press ADV repeatedly until the item you want to adjust is displayed in magenta. -/+ ADV CONTRAST BRIGHTNESS ............... ....... I ....... I+ + SHARPNESS ........ ! ....... + COLOR TINT RESET ........ ........ I ....... I .......
Adjusting the Sound You can adjust the sound quality (BASS, TREBLE and BALANCE) to suit your taste. 1 MENU "" 0 _#NrDEO • 0 VOtUME • • ,,CHANNEL • O0 0 .... ADV 0 + 2 -/+ -- Press MENU repeatedly until the Audio menu is displayed on the screen. Press ADV repeatedly until the item you want to adjust is displayed in magenta. MTS JSTRJSAP BASS .... TREB.E ML)NO "'''1 -''''='+ li....... II....... ........ BALAMCE ........
Using Closed-Captioned Function Closed-captioning is a printed version of the dialogJe, narration, and/or sound effects of a TV program. Captions will appear at either the top or bottom of the screen during captioned broadcasts as shown. Captioning is especially helpful for hearing impaired individuals. 1 2 ...... e ME/U @ o......... o Select the desired program. Press RECALL to check if the program is being captioned. If it is, the word "CAPTION" is displayed on the screen.
Text is information screen. It is usually For example, news, 1 2 weather it could that is presented not related be a listing information to the using from one half to full of the closed-captioned or stock television program. market programs, reports. Select the _]esir_d program. Press RECALL to check if the program includes text information. If it is, the word "TEXT" is displayed on the screen. TEXT __ TV 13 tO 3 r- Press C.
Locking Channels With this function you can lock out specific channels (for example a channel that you do not wan_: your children to watch) by entering your own 4-digit code. The TV will not be able to tune them for the next 24 hours; unless you cancel the locked out channels. This TV has 8 memory spaces total, 4 for the TV mode and 4 for the CABLE mode. Select a channel you want to lock out.
6 Press ADV to lock out the channel. The display at{he right will appear on the screen for about 4 seconds. CH 4 LOCKED 1234 7 Repeat steps 1 to 6 for other channels. This TV has 8 memory spaces total, 4 for the TV mode and 4 for the CABLE mode. Note: If a different code number is used whenever you lock out a channel, the last one has priority over the preceding ones. 8 Select another channel. Select "CLEAR" following on the previous page. the steps 2 to 4 CH LOCK CLEAR 0 0 tt- TV ....
Programming Your Favorite Channels The Favorite Channel Programming feature allows you to program up to 12 of your favorite channels. Once prograrrrmed, you can use the FAV •/• buttons on the Remote Control 1:o scan through on!y your favorite nels, skipping other channels you do not normally view. You can use the CHANNEL •/• buttons to scan through all the channels you programmed in the TV's memory. 1 _,IENU I_//VIDEO o o o Example: _AOV-----+ -- -- a channel you want to program.
;Clhanging On-Screen Display Language Three different languages (ENGLISH, FRENCH and SPANISH) are available nSenus, and messa_ges), and you can choose the desired one. MENU . ® TVNIDEO • VOtLI&_E • displays • CH/kNJ_EL • (adjustment O Press MENU repeatedly until the Option menu is displayed on the screen. 0@@00 1 C O LANGUAGE : [ENGL I SHIFRENCH SPANISH + ADV for the on-screen 2 Press ADV repeatedly until "LANGUAGE" is displayed in magenta.
Connecting a VCR Connect VIDEO/AUDIO IN jacks on the TV rear to the video/audio output jack,'; of a VCR, (Laser Disc Player, Video Camera, etc.) for playback of video material. The S-VIDEO jack is provided for direct S-video connection from VCR. When the S-video cable is connected to the S-VIDEO IN jack, the VIDEO plug should not be connected.
Cleaning and Care WARNING: ' TV sets use High Voltage. Do not try to remove the cabinet back. Refer servicing to qualified service personnel. To clean the TV screen: 1 First remove the plug from the power outlet to avoid possible shock hazard. 2 Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean TV screen and trim. Do not use too much water on the TV scre6n. Water spills into the cabinet and may cause damage to the TV. Avoid excess water.
Before Calling Service Personnel Before calling service personnel, please check the following chart for a possible cause of the problem encing. A minor adjustment on your part may eliminate the problem and restore your TV reception. ,:_;_; • • • ib Be sure power May be station Check antenna Check antenna you are experi- :Adjustments cord is plugged in. trouble. connections. for broken wires. • Press POWER buttolq. • Try another channel. • May be station trouble. • Try another channel.
'Limited Toshiba America warranties to'no other Limited United States Warranty Consumer One (1) Year repair Inc. ('TACP") this or workmanship retail purchase. a defective ized ]-ACP!THI when warranty Hawaii person Inc. ("THI") receiving service service and its parts against defects in You this for a period of one (1) yea r after the date Durng this period, TACP and THI will product and returned or any or part, without charge station personnel will is required.
NOTES 28
NOTES 29
NOTES 30
NOTES 31
TOSHIBA AMERICA CONSUMER PRODUCTS, INC. HEAD OFFICE/82 TOTOWA ROAD, WAYNE, NEW JERSEY 07470 FACTORY SERVICE CENTERS/NORTHEAST: 82 TOTOWA ROAD, WAYNE, NEW JERSEY 07470 MIDWEST: 1010 JOHNSON DRIVE, BUFFALO GROVE, ILLINOIS 6()089-6900 WEST: SOUTHWEST: SOUTHEAST: TOSHIBA HEAD HAWAII, OFFICE/327 KAMAKEE --TOSHIBA INC. STREET, HONOLULU, OF 5490 E. FRANCIS ST., ONTARIO, CA 91761 1421 CHAMPION DRIVE, SUITE 304 CARROLLT(DN, TEXAS 75006 6115 JIMMY CARTER BLVD.
