TOSHIBA Color Televisio a OWNER'S MANUAL CF27G50/CF32G50/CF3 _I.I.
Customer's Record Dear Customel Congratulations! You have purchased finest Color TV's on the market! one of the This manual will help you use tl'ie many exciting and useful features to make your TV viewing more enjoyable than ever before ...... Before operating y()ur T_V se{i please read all these safety and operating instructions then retain for future reference. completely You will find the model number and serial number on the back of your TV set. Record these numbers in the spaces providecl below.
Table of Contents Advanced Operation Set Up Introduction ....................................................... 4 Watching Installing Your TV .............................................. 4 Using Closed-Captioned Antenna/Cable "IV Connection ......................... 5 Pre_aration Picture-in-Picture (TV Set) ........................... 6 Location of Controls (Remote Control) ........... 9 Function ...................27 Locking Channels .............................................
Introduction This manual applies to models CF27G50, CF32G50 and CF36G55, and there are slight differences the model of your TV before using this manual. CF27G50 CF32G50 between them. Check C:F36G55 Installing your TV Where to install Place the TV on the floor or on a sturdy platform. The mounting surface should be flat and steady. WARNING : TO AVOID PERSONAL INJURY • Do not stand or climb on the TV. Lighting • Do not put a VCR or any heavy object on top of the TV.
Antenna/Cable TV Connection You can use either an indoor or outdoor antenna to receive VHF and/or UHF channels. Channels 2- 13 are VHF channels, and channels 14- 69 are UHF channels. We recommend using an outdoor antenna for better picture quality. You can receive Cable TV by connecting a cable supplied by your local cable company.
Location of Controls (TV Set) For specific use of each control, consultthe corresponding CF27G50 page numbers in brackets. IIIIIIIIIIIIIIIII1|1111|1111 IIIIIIIIIIIIIIIIIIllllllllll Iiiiiiiiiiiiiiiiiiiiiiiiiiii _ 0 B VIDEO/AU DIO terminals [3"._] -- TVNIDE0 button* -VOLUME EL.] F._ [33] _lr/& 3uttons* CHANNEL "/A [18] butt°ns [18] MENU © OOOOO ---ADV .... TVNIDEO TVOLUMEA + _, _°i_ ,CHANNEL,I, I ) I LPowER L L.
CF32G50 Front Rear view view _ @ Z o. <_ <_ I=l_ilillil!fllllill!!ilillilfliiit IIIIIIlllllllllllllllllllll{I]]-Ii I,M !/IIIIIIIII :/liliiiiii[ ! i/iliiiiiii _o 1 _ i u_ > N o VIDEO/AUDIO termi/0als [32] O O O ,D o -J button* [33] VOLUME T/• I__L q buttons* I___CHANNEL _'/• [18] buttons [18} ......,Lo!._._! !_.! ,_ , ,1 o.......
Location of Controls (TV Set) Front CF36G55 Rear view view VIDEO/AUDIO TV/VIDEO button* -_ tesrninals [32] [33] VOLUME _'/• buttons* ___ CHANNEL ,/• [18] buttons [18] 5°% MENU O ADV 1" ( POV_t'_R_.
Location of Controls (Remote Control) Only the buttons that are used to operate the -IV set are described pages in brackets. Aim at the remote here. For details on the use of each control, refer to sensor on the "IV l 1 C.CAPT button* RECALL button* [27] TV-CABLE-VCR switch* Set to "TV" to control the TV. _NIDEO button POWER button [18] [33] ©©Q @(9(9 .
Before Using the Remote Control With this Remote Control, you can operate your TV and most models of remote-controlled VCR's and Cable TV converters even if they are different brands. However, this Remote Control must be programmed to control other brands of VCR's and/or Converters. If you will be using your TV set with a TOSHIBA VCR, your remote has already been preprogrammed for you.
Using the Remote with VCR or Cable TV Converter i O To control a TOSHIBA VCR, first set the TV-CABLE-VCR switch to "VCR" position. The button,'; shown below will then - control the VCR. The rest of the buttons operate the TV as usual. If you have another brand of VCR, you can probably program your Remote to control it. Details are on page 11. • To control a cable TV converter, this Remote Control must be programmed to recognize the brand of your converter. See page 11.
Programming the Remote Control • This Remote Control is preprogrammed to operate TOSHIBA VCR's. • To use VCR's other than Toshiba models (or Cable converter), perform oou ®®® If more than one number find the one that works. Number procedures before operating. Refer to the "VCR code table" (or "Cable. TV converter code table'3 on pages 13 and 14 to find the code num3er that corresponds to the brand name of your VCR (or your converter).
Programming • Insome Control. the Remote Control (Continued) rare cases, you may not be able to operate your non-Toshiba equipment with the supplied Remote This is because your equipment may use a code that is not provided with this Remote Control. In this case, please use the equipment's own remote control. " VCR c_ode table BRAND NAME Adventura .............. Aiko .................. (..... Aiwa ....................... Akai_ ........................
Programming Quarter ................... Quartz ..................... Quasar .................... Quelle ..................... Radio Shack ........... Radiola ................... Radix ...................... Randex ................... RCA ........ _................ the Remote Control (Continued) 065 065 054,096,115 100 019,056 100 056 056 054,061,079,084, 096,115,124,125, 168,221 RCA Unified ........... 079 Realistic .................. 019,054,056,065, 066,067,081,085, 123,259 Rex .........................
Menu Function (General Instructions) We suggest you familiarize yourself with the procedure before using the Menu function. To-adjust any TV feature, the use of the Menu function is required. The adjustment.,; that can be made to the TV appeal on the screen. MENU button (on TV and on Remote) Each time you press MENU, the Picture, Audio, Setup or Option menu on-screen display is selected in order,, then press ADV. Picture 1 _/+ --- ADV CONTRAST -'| BRIGHTNESS -"''''''1 ...... ''' .....
Programming Channel Memory The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL • or • button. First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area. If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels. O Press POWER to turn on the TV. Press MENU repeatedly until the Setup menu is displayed on the screen.
After performing the CH PROGRAM function, specific channels. P 1 ........... o o d%++ • ADV .... {- ADV CHANNEL • y CHANNEL •/A MENU 2 3 you can add or erase Select the channel you want to erase using the CHANNEL A or • button, or select the channel you want to add usinq the Channel Number buttons. Press MENU repeatedly until the Setup menu is displayed on the screen. Press ADV repeatedly until "ADD/ERASE" is displayed in magenta. ADDIERASE TO SELECT TO CONTROl 4 C .
Watching TV Programs • First set the TV-CABLE-VCR J switch on the Remote Control 1 to "TV" position• Press POWER to turn on the TV. To turn off the TV, press POWER again• 6 5° 2 1 TV TV/VIDEO 2 Select a channel in one of the following two ways. • To scan the memorized channels in numerical sequence Press CHANNEL • to select the next higher channel. Press CHANNEL • to select the next lower cqannel.
Convenient Remote -- RECALL Press RECALL to display the following screen information. -- MUTE • Channel number • VIDEO mode selected • Stereo or SAP audio status ADVak -- RTN EDS MENU ADV_ r STOP SOURCE REC TVNCR REW PLAY PIP STILL LOCATE FF ® (D ® C,-,-) SWAP Functions onSTFREO SAP TV 4 Press MUTE to mute the sound. The word "MUTE" will be displayed on the screen as shown. This is useful during telephone calls or other interruptions. To restore the sound, press MUTE again.
Convenient Remote Functions (Continued) With the off-timer, you can set the -IV to turn off automatically after a predetermined period of time (up to 3 hours, in 10 minute units). Press MENU repeatedly until the Setup menu is displayed on the screen. 2 Press ADV repeatedly until "TIMER" displayed in magenta. TIMER 0 MIN is TO SELECT ITEM 3USH ADV TO CONTROL PUSH + 3 Press + or-to enter the length of time you want the -IV to stay on.
Adjusting the Picture You can adjust the picture quality (CONTRAST, BRIGHTNESS, SHARPNESS, COLOR and TINT) to suit your taste. .......... O Q 5OLU_E6 5 "_""_) 1 ADV--I L_ I - -/+ [.--- 2 ADV Press MENU repeatedly until the Picture 1 menu is displayed on the screen. CONTRAST COLOR TINT Press ADV repeatedly until the item you want to adjust is displayed in magenta. TO TO Press- I+ ....... ....... I ....... I ....... + * ......... ....... I ....... I ....... + + RESET MENU 3 ......
Adjusting the Picture (Continued) These selections change the appearance picture. Cool=Bluish, Medium=Neutral, 1 of gray and white tones of the Warm=Redish Press MENU repeatedly until the Picture 2 menu is displayed on the screen. COLOR TEMPERATURE : 2 Press ADV repeatedly until [COOL ]MED I LIM WARM "COLOR TEMPERATURE" is clisplayed in magenta. TO SELECT ITEM PUSH ADV TO CONTROL PUSH - + 3 Press- or + until the mode you want is displayed in magenta. Choose COOL, MEDIUM andWARM in order.
Adjusting the Sound P O O AOV + - You can adjust the sound quality your taste. 1 _/+ 2 (BASS, TREBLE and BALANCE) to suit Press MENU repeatedly until the Audio menu is displayed on the screen. Press ADV repeatedly until the item you want to adjust is displayed in magenta. ADV MENU _ [STR]SAP MON0 8ASS .... • •"" I ........ TREBLE .... "''"1''"''" BAUANCE -'''''''1" t _ ...... 4 TO SELECT ITEM PUSH AOlt TO CONIROL PUSH - + 3 c,CAPT MTS: RECALL Press- or + to adjust the level.
Adjusting I the Sound (Continued) ® O ..........d% L ADV .... + -- 0 ....... 0 _/+ The MTS (Multi-channel TV Sound) feature allows you to improve your -I-Vviewing with high fidelity stereo sound. This TV also allows you to activate or deactivate the stereo surround sound effect. MTS also provides for an extra channel, SAP (Second Audio Program), used to transmit a second language or other audio information. - ADV -- Press MENU repeatedly until the Audio menu is displayed on the screen.
Watching Picture-in-Picture In addition to the main picture, another TV program or video source being received through be displayed simultaneously as a small picture. This is called PIP (Picture-in-Picture). Be sure to connect a VCR with the VIDEO/AUDIO cables. Antenna/Cable C C _.p3" RECALL -_GP "_' _,j_IDEO the VIDEO input jacks can lead-in pol_,&. R Antenna MUTE _ input _°" OO Antenna output VCR 0,. i t"T ®®® Audio outputs 0,. -rv rear @®@ O_C"°"" t" s_; .@' @] r" O Or) r" t- .
Watching To change Picture-in-Picture the position (Continued) of the small picture Press LOCATE repeatedly when a small picture is displayed. position of the small picture will change in order. The display t To switch the main and small picture Press SWAP when a small picture is displayed. The main and small pictures will switch. To switch them again, press SWAP again. /t To freeze the small picture Press STILL. when a small picture is displayed.
Using Closed-Captioned Function Closed-captioning is a printed version of the dialogue,, narration, and/or sound effects of a TV program. Captions will appear at either the top or bottom of the screen during captioned broadcasts as shown. Captioning is especially helpful for hearing impaired individuals. Select the desired program. The captioned programs are usually notated on your local TV listings by its service marks such as "CC'. 2 Press C.
Using Closed Captioned Function (Continued) Text is information screen. For example, news, that It is usually it could weather is presented not related be a listing information using to the Select the desired program. 2 PressC.CAPT one half to full of the closed-captioned or stock 1 from television program. market programs, reports. on the Remote Control to call up the CLOSE[) CAPTION menu. Press C.
Locking Channels With this function you carl lock out specific channels (for example a channel that you do not want your children to • Watch) by entering your own 4-digit code. The TV wilt not be able to tune them for the next 24 hours, unless you cancel the locked out ,channels. ]his TV has 8 memory spaces total, 4 for the TV mode and 4 for the CABLE mode. [ Select a channel you want to lock out. @ @ OO _--ADV 0 .... 0 Example: + channel 4 t- (.
Locking Channels (Continued) 6 Press ADV to lock out the The display at the right will screen for about 4 seconds. channel. appear on the CH 4 LOCKED 1234 7 Repeat steps lto6for Note: other channels. Ifa different code number is used wheneveryou lockout a channel, the last one has priority over the preceding ones. 8 Select another channel, before 1 Select "OLEAR" following on the previous page. turning offtheTV if desired.
Programming Your Favorite Channels The Favorite Channel Programming feature allows you to program up to 12 of your favorite channels. Once programmed, you can use the FAV T/A buttons on the Remote Control to scan through only your favorite nels, skipping other channels you do not normally view. You can use the CHANNEL &/V buttons to scan through all the channels you programmed in TV's memory. chan- Select a channel you want to program. tetO Example: channel 2 _-- ADV-- L / t o > /+ ADV 1,1.
Changing On-Screen Display Language Three different languages (ENGLISH, FRENCH and SPANISH) are available menus, and messages), and you can choose the desired one. for the on-screen Press MENU repeatedly until the Option menu is displayed on the screen. ......... .... 5"% 5"% 2 LL ,. Press ADV repeatedly until "LANGUAGE" is displayed in magenta. - ADV displays (adjustment LANGUAGE : I ENGL ESH ] FRENCH SPAN I SH _;T ; } : TO SELECT ITE_,I PUSH ADV TO CONTROL PU,qH - + MENU 3 -! _ 2o_,_ c.
Connecting a VCR Connect VIDEO/AUDIO IN jacks on the rear of the TV to the video/audio output jacks of a VCR, (Laserdisc Player, Video Camera, etc.) for playback of video material. The S-VIDEO jack is provided for direct S-video connection from a ._; VCR. Antenna/Cable lead-in input Antenna TV rear output /- "-_ VCR islr sv,eo }l V deo output output Video Audl "[ cable (not supplied) > e- • eto Audio cable (not supplied) €.
Connecting an Audio Con nect the VARiable AUDIO OUT jacks to the auxiliary using the Remote Control for this TV. Amplifier. input jacks on the stereo amplifier. You can control the audio level rv "OUT"I _ IN Stereo amplifier VAn AUDIO Audio ca ble VIDEO iL@= @ M_NO AUX. input S.VIvDEO (not supplied) i_1 IP_IA SPEAKERON/OFF switch 1 Turn the TV and the stereo amplifier ON. :2 Adjust the VOLUME buttons on the TVfor a moderate listening level.
Cleaning and Care WARNING: . TV sets use High Voltage. Do not try to remove the cabinet back. Refer servicing to qualified service personnel. "1-oclean the TV screen: 1. First remove the plug from the power outlet to avoid possible shock hazard. 2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean TV screen and trim. Do not use too much water on the TV screen. Water spills into the cabinet and may cause damage to the TV. Avoid excess water. 3.
Before Calling Service Personnel Before calling service personnel, please check the following chart for a possible cause of the problem you are experiencing. A minor adjustment on your part may eliminate the problem and restore your TV reception. Problem Checks and Adjustments TV will not turn on • • Make sure the power cord is plugged in, then press FOWER button. Check battery in the Remote. (Maybe batteries are "dead".
Limited United States Warranty Toshiba America Consumer Products, Inc. ('TACP") and Toshiba Hawaii Inc. ('THI") make the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee. Owner's Manual and Demographic Card You should read this owner's manual thorouyhly before opersting this product.
TOSHIBA AMERICA CONSUMER PROOUCTS, INC. HEAD OmCE/82 TOTOWA ROAD, WAYNE, NEW JERSEY 0747O FACTORY SERVICE CENTERS/NORTHEAST: 82 TOTOWA ROAD, WAYNE, NEW JERSEY 07470 M,DWEST: 1010 JOHNSON DRIVE, BUFFALO GROVE, ILUNO_S 60089-6900 WEST': SOUTHWEST: SOUTHEAST: TOSHIBA HAWAII, HEAD OFFICE/327 KAMAKEE _- TOSHIBA INC, STREET, HONOLULU, OF 5490 E. FRANCIS ST., ONTARIO, CA 91761 1421 CHAMPION DRIVE, SUITE 304 CARROLLTON, TEXAS 75006 6115 JIMMY CARTER BLVD.