Blu-ray Disc™ Player BDX1200KU Owner’s Manual TM
Contents English 1 Important...................................................................................................................3-4 Safety and important notice............................................................................................3-4 2 Your Product............................................................................................................... 5-7 Regions codes................................................................................................
Safety and important notice WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The important note is located on the rear or bottom of the cabinet.
English - To prevent direct exposure to laser beam, do not try to open the enclosure. - Visible and invisible laser radiation when open and interlocks defeated. DO NOT STARE INTO BEAM. FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Region Regions Codes Both the Blu-ray Disc™ Player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Blu-ray Disc™ Player is described on the rear panel of the Blu-ray Disc™ player. Region U.S.A.
Product overview English Main Unit 7 8 NO 5 4 3 Control Function a 1 Turns the power on or restores the unit to the standby mode. b B/X Playback/Pause. c x Stop play. d Z Open or close the disc compartment. e USB jack Connect a USB flash drive. f Display panel Show information about the current status of this unit. g IR Sensor Point the remote control at the IR sensor. h Disc compartment Loads a disc into the disc drive.
English Remote Control REMOTE SIGNAL EMITTER • Point remote control to the sensor on the front panel ON / STANDBY • To switch the Blu-ray Disc™ Player to ON or standby mode SETUP Enters or exits the system setup menu MC(Media Center) • To open/close Media Center PIP AUDIO Switch the secondary audio of secondary video(PIP) to on or off SEARCH • To search a title, chapter, track or playing time HDMI To change resolution of HDMI video output to fit TV.
3 Connections English Make the following connection to use this product. Option 2: Connect to the HDMI Jack This type of connection provides better picture quality. Connecting to a TV Connect the product to TV to view disc play.
Connect USB device Option 1: Connect to the digital amplifier⁄ receiver Option 2: Connect to an analog stereo system Option 3: Connect to network A USB device provides an additional memory to software upgrade and enjoy BD-Live™ bonus content. You can also enjoy playing back MP3/JPEG/ MPEG4 files stored in the USB flash device. Option 1: Connect to the digital amplifier/receiver Route the sound from this player to other device to enhance audio output. DIGITAL AUDIO INPUT COAXIAL 1.
4 Preparation English Always follow the instructions in this chapter in sequence. Note: - Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Prepare the remote control Setting up the player Find the correct viewing input 1. Press 1 to turn on this product. 2. Turn on the TV and switch to the correct video-in input (refer to the TV user manual on how to select the correct input).
Playback Functions Basic Playback 1. Press button on the front panel or the remote control, your Blu-ray Disc™ player will turn on. The unit will take around 20 seconds to warm up. 2. Turn on the TV, and then select the input setting on the TV that matches the connection method you used to connect your player. 3. Press OPEN/CLOSE Z to slide out the disc tray. 4. Place a disc on the disc tray with the label facing up and then press OPEN/CLOSE Z to slide back and close the disc tray.
Advanced Playback English DISPLAY Press this button and the screen will display some information about disc, such as: Title number, Chapter number, Track number, Elapsed Time, Mode, Audio, Angle, and Subtitle languages. Press this button again to turn off the information display. During DVD/CD playback, you may edit the chapter and track. REPEAT Press REPEAT repeatedly to select different repeat modes. DVD:Repeat Chapter, Repeat Title, and All. VCD PBC Off/CD/JPEG/MP3:Repeat Track and All.
[Subtitle Style]: When you play the Blu-ray Disc™ or DVD disc and if it has external subtitle, you will see it in OSC menu. [Bitrate]: Use / to select your desired Bitrate. [Still Off]: Close the Still feature of DVD disc. For some DVD discs, a certain video picture will be frozen as a still picture during the process of playback to let the user has a better view of certain picture. To continue playback, select Still Off. [Ins Search]: Instant search 30 seconds forward.
6 Customizing English This section describes the various setting option of this Blu-ray Disc™ player. If the setup option is grayed out, it means the setting cannot be changed at the current state. General Setting 1. Press SETUP button on the remote control. The Setup Menu appears. General Setting System Screen Saver On Language Disc Auto Playback On Playback CEC On Security Load Default More... Network Upgrade More...
Auto Choose a resolution that fits your TV. 480i Change will be applied immediately, you have 15s to determine whether to save the setting or rollback to prior resolution. Better performance will be provided by an HDMI connection! 720p 480p 1080i 1080p Previous OK Next Press / to select an option. Press OK. Select "Yes" or "No" using /.
• [Audio] English Select the default audio language. • [Subtitle] Select the default subtitle language. [Playback] General Setting System Angle Mark On Language PIP Mark On Playback Secondary Audio...
General Setting System Language Playback Screen Save Off Parental Control Disc Auto Playback On Enter CECpassword: On Security Disc Auto Upgrade On Network Load Default More... Move cursor key to select menu option then use “OK ” key to select RETURN Return 3. Select a rating level, then press OK.
English [TV] • [TV Screen] Select the screen format according to how you want the picture to appear on the TV. {16:9 Full} – for a disc with the aspect ratio of 4:3, the output video is stretched into 16:9 full screen. {16:9 Normal} – for a disc with the aspect ratio of 4:3, the output video is resized vertically to match what will be seen on the display. {4:3 Pan&Scan} – for standard TV, Display a wide picture on the entire screen and cuts off the redundant portions.
Brightness Contrast Hue Saturation Change RETURN Exit • [Sharpness] Select the level of sharpness: High, Middle, Low {High} - Select High sharpness level {Middle} - Select Middle sharpness level {Low} - Select Low sharpness level [Motion Video Process] Display Setting TV Video Mode Standard Video Process Motion Video...
System Information English 1. Press SETUP, [General Setting] menu is displayed. 2. Press to select [System Information]. - The current software version and MAC address will be displayed. - Press to return to the previous menu. - Press SETUP to exit the menu.
Playable media This product can play: • Blu-ray Disc™-Video, BD-R/RE2.0, BDAV • DVD, DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (Dual Layer) • Video CD/SVCD • Audio CD, CD-R/CD-RW • AVCHD, AVCREC disc • USB flash device Video Signal system: NTSC Composite video output: 1Vp-p (75 ohm). HDMI Output: 480i, 480p, 720p, 1080i, 1080p, 1080/24p. Audio • 2 Channel analog output - Audio L&R : 2 Vrms (< 2.
8 Troubleshooting English If you experience any of the following difficulties while using this unit, check the list below before consulting your nearest TOSHIBA dealer. Problem Tip No reaction to the remote control. Connect the product to the power outlet. Point the remote control at the product. Insert the batteries correctly. Insert new batteries in the remote control. No video signal on the display device. Turn on the TV. Set the TV to the correct external input.
Cannot play back a disc. Make sure that the Blu-ray Disc™ player supports the disc. English Make sure that the Blu-ray Disc™ player supports the region code of the DVD or Blu-ray Disc™. For DVD+RW/+R or DVD-RW/-R, make sure that the disc is finalized. Clean the disc. Cannot play back JPEG files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format. Cannot play MP3 files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
9 Glossary English Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high definition or wide TV is 16:9. The letterbox allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. Blu-ray DiscTM Blu-ray DiscTM is a next generation optical video disc capable of storing five times more data than a conventional DVD.
English JPEG A very common digital still picture format. A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. Files are recognized by their file extension ‘.jpg’ or ‘.jpeg.’ LAN (Local Area Network) A group of linked devices in a company, school or home. Indicates the boundaries of a particular network.
License Information on the Software Used in This Product English This document is statement purpose only. Not concerned with operation of this product. The software pre-installed in this product consists of multiple, independent software components. Each software component is copyrighted by a third party. This product uses software components that are distributed as freeware under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”).
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it.
English an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;and give any other recipients of the Program a copy of this License along with the Program.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
English of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License.
English they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library.
parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.
English notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4.
License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10.
English up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12.
COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1995-2009 International Business Machines Corporation and others All rights reserved.
English * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http:// www.openssl.org/)" * * 4.
LIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */ zlib /* zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.
English The FreeType Project LICENSE 2006-Jan-27 compliance with this license. We thus encourage you to use the following text: Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg """ Portions of this software are copyright © The FreeType Project (www.freetype. org). All rights reserved.
2. Redistribution This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile,display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights granted herein, subject to the following conditions: Redistribution of source code must retain this license file (`FTL.
English use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as "the Independent JPEG Group's software". To avoid entanglement with the Unisys LZW patent, GIF reading support has been removed altogether, and the GIF writer has been simplified to produce uncompressed GIFs.
Software components as distributed by the Copyright Holder(s). English Modified Version refers to any derivative made by adding to, deleting,or substituting -- in part or in whole -- any of the components of the Original Version, by changing formats or by porting the Font Software to a new environment. Author refers to any designer, engineer, programmer, technical writer or other person who contributed to the Font Software.
Toshiba America Information Systems, Inc. ("TAIS") makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. DAV PRODUCTS PURCHASED IN THE U.S.A. OR PUERTO RICO AND USED ANYWHERE OUTSIDE OF THE U.S.A.
English ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A.
