Blu-ray Disc™ Player BDX3300KB Owner’s Manual
Contents English 1 Important.................................................................................................................... 3-5 Safety and important notice...............................................................................................3 Disposal of your old product and batteries....................................................................... 3-4 Notice for Trademark....................................................................................................
Safety and important notice • • • • • • Disposal of your old product and batteries Warning: Risk of overheating! Never install the product in a confined space. Always leave a space of at least 10cm around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Never place the product, remote control or batteries near naked flames or other heat sources, including direct sunlight. Only use this product indoors.
English IMPORTANT The wires in this mains lead are coloured in accordance with the following code: BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this unit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire that is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black.
English Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. “Wi-Fi CERTIFIED” logo is a registered trademark of Wi-Fi Alliance. “Wi-Fi PROTECTED SETUP” logo is a trademark of Wi-Fi Alliance. DLNA™, DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance. YouTube is a registered trademark of Google, Inc. Picasa is a trademark of Google, Inc.
2 Your Product Region English Regions Codes Both the Blu-ray Disc Player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Blu-ray DiscTM Player is described on the rear panel of the Blu-ray DiscTM player. TM Region U.S.A.
English Product overview Main Unit 7 8 6 5 4 3 NO Control Function a USB jack Connect a USB flash drive. b 1 Turn the power on or restores the unit to the standby mode. c B/X Playback/Pause. d x Stop play. e Z Open or close the disc compartment. f IR Sensor Point the remote control at the IR sensor. g Display panel Show information about the current status of this unit. h Disc compartment Load a disc into the disc drive.
Remote Control English OPEN/CLOSE • Open/ Close the disc tray Number Buttons Select numbered items in a menu Press to enter track/ chapter/ title numbers/password directly CLEAR • To clear an entry or the bookmark and program you set MC(Media Center) • To open/close Media Center POP UP/MENU • To display a menu included on many Blu-ray Disc™/DVD video discs OK • Acknowledge/ Confirm menu selection • Navigation/ Cursor buttons for moving to the left / right / up / down • Press during JPEG playback to rota
Make the following connection to use this product. Connecting to a TV Option 2: Connect to network Connect this product to the network to enjoy BD-LiveTM bonus content, Media Server Search, Picasa, YouTube, BBC iPlayer, External Control and software upgrade by network. English 3 Connections Connect the product to TV via HDMI jack to view the playback from the disc. Connect to the HDMI Jack 1. Connect the network cable from the LAN jack on the product to the LAN jack on the network system. HDMI IN 1.
Connect USB device English A USB flash drive provides an additional memory to software upgrade and enjoy BD-LiveTM bonus content. You can also enjoy playing back MP3/ JPEG/MPEG4 files stored in the USB flash drive. 4 Preparation Always follow the instructions in this chapter in sequence. Note: - Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Prepare the remote control 1.
Setting up the player 5 Playback Initial Setting When you turn on this unit for the first time, you need to follow these steps. 1. A welcome page will be displayed when this product is powered on. 2. Press OK to enter language setting. 3. Select your desired language, resolution and aspect ratio using /, then press OK. 4. Press SETUP to exit the Setup menu. Use the SETUP menu 1. Press SETUP to display the Setup menu when the Blu-ray DiscTM Player is playing or no disc.
English speed will increase through the following sequence: 2X, 4X, 8X, 16X, 32X 2. Press B/X to resume playback. 3. Press F.R m to fast reverse through the disc. The fast reverse speed changes based on how many times you pressed the button. The speed will increase through the following sequence: 2X, 4X, 8X, 16X, 32X 4. Press B/X to resume playback. Instant Search and Instant Replay 1. During playback, press and hold M button, you can search 30 seconds forward. 2.
• System Information PROGRAM During CD/DVD/VCD playback, you can press this button to edit the sequence of the playlist. BOOKMARK During VCD/ DVD disc playback, press the BOOKMARK button to add the bookmark; press and hold for a few seconds to display the list of bookmark which you added before on the screen, then you can press the OK button to select the bookmark or CLEAR button to delete the bookmark.
English [Time]: View the elapsed/remaining playback time of title/chapter. Use / to view: the elapsed playback time of title, the remaining playback time of title, the elapsed playback time of chapter, and the remaining playback time of chapter. [Mode]: Select playback mode among shuffle, random, and normal. [Audio]: The Blu-ray DiscTM/DVD disc’s soundtrack language. Use / to view the audio available in the disc and select your desired Audio type.
This section describes the various setting option of this Blu-ray DiscTM player. If the setup option is greyed out, it means the setting cannot be changed at the current state. General Setting 1. Press SETUP button on the remote control. The Setup Menu appears. General Setting System Screen Saver On Language Disc Auto Playback On Playback CEC On Security Load Default More... Network Upgrade More...
Press / to select an option. Press OK. Select "Yes" or "No" using /. English Resolution has been changed! 14s Yes Does everything looks all right with this resolution? Press Yes if you want to apply it. Press No to rollback to previous one. Previous No OK Next 7. Press OK, enter Aspect ratio setting. Choose an aspect ratio that fits your TV. The change will be applied in the next page. Determine whether to save the setting or rollback to the previous aspect ratio.
Upgrade Downloading upgrade file.Please wait! Cancel 2. When download is finished, the player will pop up a message for you, and you can choose whether to proceed with the upgrading or not. If you choose to upgrade, the player will begin to upgrade, and pop up a message to show the progress. When upgrade is done, the player will restart. Attention! Do NOT cut off the power supply when the firmware is upgrading! If not, the player might become unworkable.
English called Sub Window. The PIP mark is displayed when in PIP mode and PIP Mark is set to ON. {On} – Display the PIP mark. {Off} – Hide the PIP mark. Note: - High Definition PIP (Second Video) is not supported. • [Secondary Audio Mark] {On} – Display Secondary Audio Mark. {Off} – Hide the Secondary Audio Mark.
General Setting System Language Playback Screen Save Off Parental Control Disc Auto Playback On Select level: Off CEC On [1] KID SAFE Security [2] G Disc Auto Upgrade On Network Load Default More...
English 20 Notes: - Ensure that the Wifi router is switched on. - A contract with the provider is needed to connect to the Internet. - Loading BD-Live™ content from the internet may take some time, depending on the file size and the speed of the internet connection. To enjoy BD-LiveTM bonus content, you need to connect 1GB or larger USB flash drive. - Depending on the WPS type, password input prompt may not be displayed. - The network ID (SSID) and password input are case sensitive.
resolution setting. {Off} – Disable 1080/24p video resolution setting. English menu. - Press SETUP to exit the menu. [TV] • [TV Screen] Select the screen format according to how you want the picture to appear on the TV. {16:9 Full} – For a disc with the aspect ratio of 4:3, the output video is stretched into 16:9 full screen. {16:9 Normal} – For a disc with the aspect ratio of 4:3, the output video is resized vertically to match what will be seen on the display.
level. {Low} - Select Low sharpness level. English Audio Setting 1. Press SETUP, [General Setting] menu is displayed. 2. Press to select [Audio Setting], then press . 3. Select an option, press to access. Audio Setting Audio Output Coaxial PCM HDMI PCM Down_samp 48K Dolby DRC Auto Move cursor key to select menu option then use “OK ” key to select SETUP Exit 4. Press / to select a setup option and press . 5. Select the setting you wish to change and press OK to confirm.
Picasa With this player, you can access, search and view photos stored in your Picasa Web Albums. What you need to do: • On your computer, visit www.picasa.com to create an account with Picasa Web Albums. You need to do this only once. 1. Connect this player to the Internet. 2. Press CONNECTED button in remote control; or press MC, select [Connection], and press OK. 3. Select [Picasa], and press OK. »» The default Picasa page is displayed on the TV screen. 4.
7 Specification English Playable media This product can play: • Blu-ray Disc™-Video, BD-R/RE2.0, BDAV • DVD, DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (Dual Layer) • Video CD/SVCD • Audio CD, CD-R/CD-RW • AVCHD • USB flash drive Video Signal system: PAL/NTSC HDMI Output: 480i/576i, 480p/576p, 720p, 1080i, 1080p, 1080/24p. Audio • Digital output (Coaxial): 0.5 Vp-p (75 ohm) • HDMI output LAN • LAN terminal 10BASE-T/100BASE-TX WIFI • This player supports Single-frequency 2.
8 Troubleshooting Problem Tip No reaction to the remote control. Connect the product to the power outlet. English If you experience any of the following difficulties while using this unit, check the list below before consulting your nearest TOSHIBA dealer. Point the remote control at the product. Insert the battery correctly. Insert new battery in the remote control. No video signal on the display device. Turn on the TV. Set the TV to the correct external input. Select the correct video resolution.
Cannot find a JPEG file. Make sure that the selected group (folder) does not contain more than 9,999 files for DVD and 999 files for CD. English Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG. Cannot find a MP3 file. Make sure that the selected folder does not contain more than 9,999 files for DVD and 999 files for CD. Make sure that the file extension is .mp3 or .MP3. Cannot upgrade SW.
Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high definition or wide TV is 16:9. The letterbox allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. AVCHD™ AVCHD™ is a new format for high definition video camcorders which can record and play high-resolution HD images. AVI Audio Video Interleave, known by its acronym AVI, is a multimedia container ormat.
English IP Address A set of numbers which are assigned to devices participating in a computer network. JPEG A very common digital still picture format. A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. Files are recognized by their file extension ‘.jpg’ or ‘.jpeg’. LAN (Local Area Network) A group of linked devices in a company, school or home.
The software pre-installed in this product consists of multiple, independent software components. Each software component is copyrighted by a third party. This product uses software components that are distributed as freeware under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”). Some EULAs require that the source code of the applicable component be disclosed as the condition for distributing the software component in executable format.
English International Components for Unicode ICULicense.txt OpenSSL openssl.txt zlib zlib.txt FreeType FreeType.txt Expat expat.txt libcurl libcurl.txt libjpeg libjpeg-7.txt c-ares c-arse.txt mtd-utils GPLv2 libmtp LGPLv2.1 libusb LGPLv2.1 libusb-compat LGPLv2.1 WPA Supplicant WPASupplicant.txt WPA Supplicant (WPS) WPASupplicant.txt Wireless Tools GPLv2 DirectFB LGPLv2.1 Fusion GPLv2 SaWMan LGPLv2.1 libpng libpng.txt libxml2 libxml.txt (MIT License) tinyxml tinyxml.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. English 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program.
must be optional: if the application does not supply it, the square root function must still compute square roots.) English These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
7.
All rights reserved.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.] zlib zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.3, July 18th, 2005 Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty.
English Redistribution of source code must retain this license file (`FTL.TXT') unaltered; any additions, deletions or changes to the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered,original files must be preserved in all copies of source files. Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution documentation.
The GNU General Public License is a free, copyleft license for software and other kinds of works. These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us. The licenses for most software and other practical works are designed to take away your freedom to share and change the works.
English "The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals or organizations. in source code form is that same work. To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a "modified version" of the earlier work or a work "based on" the earlier work.
c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it.
you have or can give appropriate copyright permission.
If, pursuant to or in connection with a single transaction orarrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it.
libpng English This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail. Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions: 1. The origin of this source code must not be misrepresented.
The distribution terms for Bison-generated parsers permit using the parsers in nonfree programs. Before Bison version 2.2, these extra permissions applied only when Bison was generating LALR(1) parsers in C. And before Bison version 1.24, Bison-generated parsers could be used only in programs that were free software. The other GNU programming tools, such as the GNU C compiler, have never had such a requirement. They could always be used for nonfree software.