INTRODUCTION Blu-ray Disc Player OWNER’S MANUAL CONNECTIONS BDX2700KU PLAYBACK FUNCTION SETUP OTHERS 2700 Owner’s Record The model number and serial number are on the back of the unit. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this unit.
Introduction SAFETY PRECAUTIONS The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: VISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM. AVIS WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
PRECAUTIONS INTRODUCTION CAUTION: • To prevent direct exposure to laser beam, do not try to open the enclosure. Visible and invisible laser radiation when open and interlocks defeated. DO NOT STARE INTO BEAM. • Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Introduction Supplied Accessories “DVD” logo is a trademark of DVD Format / Logo Licensing Corporation. BONUSVIEW Remote Control with Batteries (AAA x 2) Composite Audio / Video Cables Owner’s Manual (EN) Quick Start Guide (EN/ES) Symbols used in this Manual To specify for which media type each function is, we put the following symbols at the beginning of each item to operate.
Table of Contents INTRODUCTION Introduction Accessing a Specific Location Directly .......... 21 SAFETY PRECAUTIONS .....................................2 Locating a specific title/chapter/time ......................... 21 IMPORTANT SAFETY INSTRUCTIONS ............. 2 Repeating a Title, Chapter, Track or Specific Segment ............................................................ 22 PRECAUTIONS ................................................... 3 Supplied Accessories ...............................
Introduction Features Blu-ray Disc x.v.Color You can enjoy Blu-ray Disc which is capable of storing five times more data than a conventional DVD. This unit supports playback of video contents on discs recorded with “x.v.Color” technology. To watch this video content with the “x.v.Color”, a TV or other display device supporting both video image reproduction using the “x.v.Color” standard and capable of manually switching it’s color setting is required.
Identification of Controls INTRODUCTION Front panel 1 2 3 4 5 6 7 7 8 9 1. Disc tray 2. OPEN/CLOSE button How to Power On Your Unit ? 3. Display • Refer to “Front Panel Display” on page 10. 1. Connect to a standard AC outlet to supply power to this unit, the ON/STANDBY indicator lights. 4. Remote sensor 5. STOP button 6. PLAY button 2. Wait about 20 seconds and the ON/STANDBY indicator will be off automatically. 3. After 10 seconds, press ON/STANDBY button to turn on the unit.
Introduction Using the Remote control Remote control No. Item 2 15 16 17 18 3 19 1 4 20 ASPECT 2 OPEN/CLOSE Press to open or close the disc tray. 3 SETTING Press to display the settings in home menu. 4 HOME MENU Press to display the Connected in home menu. BONUSVIEW Press to switch picture-in-picture feature on or off (only applicable to BD-video which supports the PIP function). For more details, see “PIP (BONUSVIEW) Setting” on page 23.
13 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Installing batteries Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 2 Insert batteries. INTRODUCTION 14 • In playback mode, press GOTO, then press the number buttons to enter a title, chapter, track, Number buttons time or file number. • In menu mode, press to enter the parental code password. Press to display the search GOTO menu.
Introduction Operating with the remote control * Do not expose the remote sensor of the Blu-ray disc player to a strong light source such as direct sunlight or other illumination. If you do so, you may not be able to operate the Blu-ray disc player via the remote control. Point the remote control at the remote sensor and press the buttons. Notes: • Direct the remote control at the remote sensor of the Blu-ray disc player.
Connecting to a TV Connect the Blu-ray player to your TV. 1. Choose the appropriate connection, then proceed to the corresponding instruction (A, B or C) on the next page. Best (Supports up to 1080i/1080p, 1080p/24F resolution.) Your TV HDMI cable HDMI IN High Definition TV Go To A Go To B Go To C No analog audio connection required. HDMI Cable NOT INCLUDED Better (Supports up to 1080i resolution.
Connections 2. Connect the cables by following the illustrations below. Connecting to a TV using an HDMI cable (Best) A Your TV COMPONENT VIDEO OUT Y PB PR SBL C SL FL SBR SW SR FR AC IN LAN USB HDMI OUT BITSTREAM / PCM OPTICAL R L AUDIO OUT VIDEO OUT MULTI CHANNEL AUDIO OUTPUT HDMI cable HDMI IN HDMI OUT Notes: • Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched.
Connecting to an Audio System • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information.
Connections Network Connection Your Blu-ray disc player can be connected to your home network: • By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference. • By connecting through the built-in wireless device and a wireless access point or router.
Connecting the Speakers (For 7.1 Audio Channel) You can connect the speakers as shown in the following diagram to obtain the 7.1 audio channels effects. Using the audio cables, connect the MULTI CHANNEL AUDIO OUTPUT (SBL, SBR, C, SW, SL, SR, FL & FR) terminals on the rear of the Blu-ray disc player to 7.1 Channel ANALOG AUDIO IN terminals of your Amplifier. For speaker configuration, please refer to “Speaker Setting” on page 34.
Connections Positioning the Speakers (For 7.1 Audio Channel) How you set up your speakers can affect the bass and the sound field. Note the following points: • Place speakers on flat secure bases. • Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains. • Keep your speakers at least 10 mm away from the system for proper ventilation. Setup example (For 7.
Playback Readable cards Information on Playback SD Memory Card (8 MB - 2 GB) Before you start playing back a disc, read the following information. SDHC Memory Card (4 GB - 8 GB) miniSD Card (8 MB - 2 GB) microSD Card (8 MB - 2 GB) Playable Discs and Files This unit is compatible to play back the following discs / files. To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos.
Playback Color Systems BD-video and DVD-video are recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada). Structure of Disc/SD Card Contents The contents of BD / DVD / AVCHD are generally divided into titles. Titles may be further subdivided into chapters.
Playing a Disc This section shows you the basics on how to play a disc. CAUTION: Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. Basic playback Preparations • When you want to view a disc, turn on the TV and select the video input connected to the Blu-ray disc player. 1 Press the ON/STANDBY button. The Blu-ray disc player turns on. To start playback in the stop mode Press Press • The sound is muted during still mode.
Playback Variable Speed Playback You can play discs at various speeds, and resume playback from the location where you stopped playback. Playing in fast reverse / forward directions Press or during playback. : Fast forward playback : Fast reverse playback To resume normal playback Press PLAY. Notes: Each time you press this button, the fast-forward or fast-reverse speed changes in the following sequence: • The Blu-ray disc player mutes sound and subtitles during reverse and forward scan.
Locating a specific chapter or track Press or repeatedly to access the chapter or track number you want. and refer to item 26 and item 10 on page 9 and page 8 respectively. Playback starts from the selected chapter or track. You can also press or (shown as in the right illustration) on the remote control to access the desired chapter or track. To locate succeeding chapters or tracks. Playback starts from the beginning of the current chapter or track.
Playback Repeating a Title, Chapter, Track or Specific Segment Repeating a title, chapter or track Press REPEAT repeatedly to select the desired repeat mode during playback. Repeat Off Repeat All Repeat Off e.g. Notes: Repeat Off Repeat Title Repeat Chapter Repeat Off Repeat Off Repeat Track Repeat All Repeat Off Repeat Off Repeat All Repeat File Repeat Off • The repeat setting will be cancelled when you stop playback.
PIP (BONUSVIEW) Setting Some Blu-ray discs have the PIP function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing BONUS VIEW whenever the scene contains the secondary video. See the documentation that came with the disc for playback instructions. 1 Press BONUSVIEW during playback to turn PIP mode on. Primary video BONUS VIEW 2 Press 2nd AUDIO to turn the audio for the video in the PinP window on or off.
Playback Subtitle Selection 1 During playback, press SUBTITLE. In the example “01/07 ENG”, “01” indicates the currently selected subtitle. “07” indicates the total number of subtitles. “ENG” indicates the subtitle language. 2 Subtitle 01/07 ENG PIP Subtitle NA Press , then use desired subtitle. / to select the Notes: • The available options of Subtitle vary from different disc format. • PIP Subtitle is not available for all discs.
Playing AVCHD/MP3/WMA/JPEG Files You can play AVCHD, MP3, WMA or JPEG files that have been recorded on a disc on the Blu-ray disc player. Playing files on a data disc When you insert a data disc containing picture, music, or video files into your player, icons are added to the menu to indicate that video, music, or picture files are available for playback.
Playback Pictures Optical Disc 1 2 Slide Show Effects None Slide Show Delay No Delay 30 item(s) Ok Main Menu Settings Thumbnail Media Menu Media Menu: Returns to select the source. This item only appears if your optical disc, USB device or SD card is inserted. Start Slide Show Browse Music Previous Folder: This item only appears if your optical disc, USB device or SD card contains several different picture folders. Now Playing File: 13/30 3 Main Menu: Returns to the main menu.
Using a USB Device You can play video, MP3 or JPEG files that have been stored on USB devices on the Blu-ray disc player. Operating a USB device 1 Inserting a USB device into the USB slot on the back of Blu-ray disc player until it clicks. To pause playback Press press PLAY. To stop playback Press 2 during playback. To resume normal playback, STOP. Press / to select Video, Music or Pictures, and then press OK.
Function setup Customizing the Function Settings You can change the default settings to customize performance to your preference. General Operations IP Settings Link Status Link Down 1. Press / to select Settings in home menu while in full stop mode, the Settings menu appears. MAC Address 00:23:18:75:b1:2b IP Mode Dynamic 2. Press button, then use options. IP Address 0.0.0.0 Subnet Mask 0.0.0.0 3. Press OK button. Gateway 0.0.0.0 4. Press menu. Primary DNS 0.0.0.0 Secondary DNS 0.0.0.
Customizing the Function Settings The symbols that might appear next to each listed wireless network in the network list are as follows: Category Icon Definition 2. Press / to select Network List, then press OK. A list of existing wireless networks near the BD player will appear (It may take several seconds for this list to be created). For example: When the BD player is turned on, it will connect to the wireless network displaying this symbol.
Function setup Customizing the Function Settings 3. Press the WPS button on the top of your router. Done 1 q a z 2 w s x 3 e d c Space 4 r f v ` 5 t g b - 6 y h n = 7 u j m 8 i k , \ [ 9 o l . ] 0 p ; / ' 5. Use / / / to highlight Done on the upper-right corner of the keyboard, and press OK to remove the keyboard from the screen. 4. Once you see “Success” on the button at the bottom of the screen, the BD player is connected to the router.
Customizing the Function Settings III. Connection to the wireless Network using Manual IP Configration 1. Press / to select Wireless, then press OK to confirm. the following screen will appear: Network List WiFi Protected Setup (WPS) Manual IP Settings 2. Press / Info Menu This menu displays the following information: • Software Version • Software Date • Netflix ESN 1.
Function setup Customizing the Function Settings TV V Type Display Setting 1. In the main menu of Settings, press button to select Display, and then press OK to confirm.
Customizing the Function Settings Digital Output: Audio Setting The settings in the Audio menu will configure the BD player’s digital audio outputs (HDMI or Optical). 1. In the main menu of Settings, press button, then use / button to select Audio, then press OK button. Audio PCM Downsampling 48 kHz Digital Output PCM7.
Function setup Customizing the Function Settings Speaker Setting Once the speakers are connected to the system and properly configured, you can check to verify that the connections to the speakers are correct by running an audio speaker test. To run this test, follow the instructions described as below: 5. Press / to choose the desired audio signal. You can select between Pink, 1kHz Sine and White. 6. Press OK to begin the speaker test.
Customizing the Function Settings Notes: Language Setting 1. In the main menu of Settings, press Language, and then press OK. / to select Language OSD English Menu English Audio Auto Subtitle None • Not all languages are available on all discs. • Some discs do not let you select the audio language using your player’s menu. Instead, you have to select the audio language from the disc setup menu (the menu that appears after you insert the disc).
Function setup Customizing the Function Settings Turning parental control on or off 1. In the main menu of Settings, press , then press to select Parental, and then press OK. System Setting / 2. Press / to select Parental Control, then press OK. 3. Press / to select On or Off, then press OK. 4. Press to go to the previous menu. System Setting the parental control level 1. In the main menu of Settings, press , then press to select Parental, and then press OK. 2.
Customizing the Function Settings Screen Saver Duration: This Blu-ray disc player has a screen saver feature that turns the screen black when your player is inactive. You can set the interval time you want your player to wait before activating the screen saver. CEC Support: This option is used to allow the TV remote control to control certain functions of the Blu-ray disc player; and for the Blu-ray player to control certain functions of the TV. Note: Not all TVs are compatible with your Blu-ray Player.
Function setup Using the Connected Applications Some players are equipped with the capability to watch movies over the internet (from Blockbuster, Netflix or Vudu), or to listen to Pandora internet radio. Watching Movies with Netflix™ To use Netfix service, connect this player to your network, and make the network settings if they are not finished yet. 1. Launching Netflix movie In Home Menu, press / to select Connected, then use , and then press / to highlight “Netflix”, and then press OK to enter.
Using the Connected Applications Watching Movies with BLOCKBUSTER® This Blu-ray Disc Player enables you to use the following services provided by Blockbuster. 1. In Home Menu, press 2. Press , then press / / to select Connected. to highlight Blockbuster, and then press OK to enter Blockbuster main menu. • Movies : Display movies. • TV Shows : Display TV Shows. • Find : Search for a desired movie or TV show by entering it manually. • My Library : Display a title that you bought or rented.
Function setup Using the Connected Applications Listening to Music with PANDORA™ Using an existing Pandora account 1. 2. 3. 4. In Home Menu, press / to select Connected. Press , then press / to highlight Pandora, and then press OK to confirm. Select “I have a Pandora account” from the option list. Sign in with your test account. Creating a new account on the BD player 1. 2. 3. 4. In Home Menu, press / to select Connected. Press , then press / to highlight Pandora, and then press OK to confirm.
Others Troubleshooting & Maintenance Troubleshooting If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Problem Solution - Check if the AC cord is properly connected. - Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again. No sound or picture - Check if the connected TV is turned on. - Check if the connections are made securely and correctly.
Others Troubleshooting & Maintenance Problem Solution The password for rating level has been forgotten - If you forget your password, reset your player to the factory defaults and your forgotten password will be cleared. For more information, see “Restore factory defaults” on page 37. Cannot connect to the network - Check if the LAN cable connection is properly made. - Turn on the modem or broadband router. - Check if the broadband router and/or modem is correctly connected.
Others Glossary Analog Audio Dolby Digital An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo (2ch) or multichannel audio. Aspect Ratio Dolby Digital Plus The width of a TV screen relative to its height.
Others Glossary Local Storage Virtual Package A storage area of sub contents for playing virtual packages on BD-video. The function which copies data to other media (local storage) from the Internet and play the secondary video, secondary audio and the subtitle at the same time. The method of the playback varies depending on discs. MP3 (MPEG audio layer 3) MP3 is a method of compressing files.
Others Specifications General Signal system NTSC color Power requirements 120 V AC, 60 Hz Power consumption 23 W Dimensions (width x height x depth) 430 x 63.5 x 209.7 mm Weight 1.
Others Limited United States Warranty Digital Audio Video (“DAV”) Product - Exchange Warranty Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A.
Others Disclaimer Up-conversion of DVD content will result in near HD picture quality. 1080p capable display required for viewing in 1080p. Feature performance may vary and may also require an always-on broadband internet connection. Firmware update and additional bandwidth may be required. BD-Live™ may require an SD or SDHC card with available storage capacity of at least 1GB. Internet services available only in the United States.
Others Open-Source Third-party Software Included in the BD-Player (as of Feb 2010): Software License (*= source must be distributed on request) A copy of the GPL2.0 license is provided in Appendix K A copy of the LGPL2.1 license is provided in Appendix L *backtrace GPL2 (Included in DVD 3.x [7630 systems] only) *directfb-extra GPL2 *cairo LGPL2 *directfb LGPL2 *iconv LGPL2 openssl BSD-old dual license. The terms and conditions which apply to this software are provided in Appendix H.
Others *mtd-utils mtd-utils-20090511 GPL 2.0 *ntfs-3g ntfs-3g 2009.4.4 GPL 2.0 *passwd TinyLogin-0.80 GPL 2.0 *ps sysutils GPL 2.0 *route net-tools-1.52 GPL 2.0 *sfdisk sfdisk-3.07 GPL 2.0 *shutdown sysutils GPL 2.0 *tinylogin TinyLogin-0.80 GPL 2.0 *hotplug hotplug-1.8 GPL 2.0 *utelnetd utelnetd-0.1.3 GPL 2.0 *procps procps-3.2.8 GPL 2.0 *libfreetype.so.6.3. freetype-2.1.2 GPL 2.0 *libtermcap.so GNU Bash-2.05 GPL 2.0 *libtermcap.so.2.0.8 GNU termcap 1.3 GPL 2.
Others Appendix A - CURL license COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2009, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
Others 1. The origin of this source code must not be misrepresented; you must not claim that you wrote the original software. 2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source. 3. This Copyright notice may not be removed or altered from any source or altered source distribution.
Others Appendix G – Freetype License The FreeType Project LICENSE ---------------------------2006-Jan-27 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction ============ The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project.
Others These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us. 3. Advertising -------------Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission.
Others Original SSLeay License ----------------------/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc.
Others Appendix K – GNU GPL 2.0 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
Others c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it.
Others Appendix L – GNU LGPL 2.1 GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Others Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1.
Others c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
Others How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library.
Others THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Others Printed in China 62 811-BD2791W010