Blu-ray DiscTM player BDX2550KB Owner’s Manual 1
Contents English 1 Important............................................................................................3-5 Safety and important notice........................................................................ 3 Disposal of your old product and batteries................................................ 3-4 Notice for Trademark.................................................................................. 5 2 Your Product.......................................................................
1 Important Warning: • Risk of overheating! Never install the product in a confined space. Always leave a space of at least 10cm around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. • Never place the product, remote control or batteries near naked flames or other heat sources, including direct sunlight. • Only use this product indoors. Keep this product away from water, moisture and liquid-filled objects.
Disposal of batteries and/or accumulators English The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
AVCHD Related Logos are trademarks of Panasonic Corporation and Sony Corporation. Oracle and Java are registered trademarks of Oracle and/ or its affiliates. Other names may be trademarks of their respective owners. Blu-ray DiscTM, Blu-rayTM, BD-LiveTM , BONUSVIEWTM, and the logos are trademarks of the Blu-ray Disc Association. Netflix is a registered trademark of Netflix, Inc. Picasa and YouTube are trademark of Google Inc.
2 Your Product Regions codes Region English Both the Blu-ray DiscTM Player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Blu-ray DiscTM Player is described on the rear panel of the Blu-ray DiscTM player. Region DVD discs that can be played North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia U.S.A.
Product overview 1 2 3 4 5 6 7 English Front panel Item Description Function 1 Disc compartment Load a disc into the disc drive. 2 IR Sensor Point the remote control at the IR sensor. 3 USB jack Connect a USB device. 4 Open or close the disc compartment. 5 Stop playback. 6 Playback/pause. 7 Turn the power on (indicator glows green) or restore the unit to the standby mode (indicator is off).
Remote control English · REMOTE SIGNAL EMITTER Points remote control to the sensor on the front panel · Opens/Closes the disc tray Number Buttons · Select numbered items in a menu numbers/ · Enters track/chapter/title password directly · GOTO Goes to a title, chapter, track or playing time · TOP MENU Displays the disc title during playback PIP Pops PIP page · · Enters ePortal page · Opens the system setup menu OK menu · A c k n o w l e d g e s / C o n fi r m sselection · Navigates the ePortal p
Make the following connection to use this product. Connecting to a TV Notes: • Do not connect a modular phone cable to the LAN jack. • Follow the connecon configuraons instrucons from your telecommunicaon carrier or Internet service provider. Connecting USB device Connect a HDMI cable from the HDMITM output jack on this player to the HDMITM input jack on the TV. An HDMI cable carries both video and audio signals. If you wish to use TV speakers, you do not need to make an additional audio connection.
4 Preparation Setting up the player Always follow the instructions in this chapter in sequence. English Note: - Use of controls or adjustments or performance of procedures other than herein may result in hazardous radia on exposure or other unsafe opera on. Find the correct viewing input 1. Press to turn on this product. 2. Turn on the TV and switch to the correct video-in input (refer to the TV user manual on how to select the correct input).
Playback Functions Basic Playback 1. Press button on the front panel or the remote control, your Blu-ray Disc™ player will turn on. The unit will take around 20 seconds to warm up. When the power supply is first switched on, the setting of the Power Down Mode is in Normal mode. 2. Turn on the TV, and then select the input setting on the TV that matches the connection method you used to connect your player. 3. Press to slide out the disc tray. 4.
English GOTO During playback, 1. Press the GOTO button to edit Title, Chapter, and Time. 2. Press / and OK button on the remote control to select Title, Chapter, or Time. 3. Press the numeric buttons or / and then press OK. The playback will skip to the desired location. 4. For Time Search, press / to select TT (Title) or CH (Chapter) time search. 3. Press the POP UP MENU button, a pop up menu will appear, then press / and OK button to select "Add to Playlist" to add the files to the Playlist.
AUDIO Press the AUDIO button on the remote control to select the audio streams that set within the Blu-rayTM or DVD disc. The screen will display: AUDIO: X / XX XXX XXXX “X” - The current audio stream number “XX” - The total number of audio streams “XXX” - Audio Language “XXXX” - Audio Technology Press the button, and the screen will display some information about the player, such as: Video; Music; Photo; Setting; Disc. QUICK Press the QUICK button to open the On Screen Control menu during playback.
English Playing MP3/JPEG/MPEG4 You can play MP3/JPEG/MPEG4 that have been recorded on a disc or a USB flash drive on the player. 1. Load a disc or insert a USB flash drive that contains MP3/JPEG/MPEG4. 2. On the setup screen, press the / button to select Video, Music, or Photo, and then press OK. The Media Center menu appears on the screen. (Sample Illustra on) Media Center menu 3. Press the / button to select Data Disc or USB1, and press OK 4.
This section describes the various setting option of this Blu-ray DiscTM player. If the setup option is greyed out, it means the setting cannot be changed at the current state. 1. Press the button in stop mode to display the setup screen. 2. Press OK to enter the Setting menu. 3. Use / to select an option and press OK. 4. Press or the BACK button to return to the previous menu. No Disc Portal Audio 1. In Setting menu, use / to select Audio and press OK. 2. Press / to select an option and press OK. 3.
English [Screen Saver] Turn On or Off the screen saver mode. It helps to protect the TV screen. {On} - Set the screen saver active after approximately 5 minutes without operation. - The Blu-ray DiscTM player will switch to standby mode if there is no operation after the screen saver is engaged for approximately 20 minutes. {Off} - Turn off the screen saver mode. - The Blu-ray Disc TM will not show the Screen Saver [Disc Auto Play] Turn On or Off the disc automatic playback switching mode.
Items Description Language 1 2 3 4 [Kid safe] [G] [PG] [PG-13] 5 6 7 8 [PG-R] [R] [NC-17] [Adult] Safe for kids All children and general guidance Parental guidance Parental guidance for children under 13 Parental guidance recommended Restricted viewing No one 17 and under allowed Adult only 1. In Setting menu, use / to select Language and press OK. 2. Press / to select an option and press OK. 3. Use / to select the preferred language. 4. Press or the BACK button to return to the previous menu.
mark is displayed when in PIP mode and PIP Mark is set to ON. {On} - Display the PIP mark. {Off} - Hide the PIP mark. English [Secondary Audio] {On} - Display Secondary Audio. {Off} - Hide the Secondary Audio. [Last Memory] If you open the disc tray or switch this Blu-ray Disc™ player to standby state during normal playback, the Blu-ray Disc™ player can memorize the end playing point, the player will start playback from the memorized point next time. {On} - Enables Last Memory feature.
Media Server Search With this player connected to network, you can play video, music and photo files from the media server. 1. Connect this player to server network and set the Media Server Search to Enable. See Network on page 16 for details. 2. Press to enter the setup screen and use to select Video, Music, or Photo, then press OK. The Media Center menu appears on the screen. 3. Press to select Media Server list, and then press OK. 4. Press to a kind of media (Photo, Music, Video) and press OK.
English Watching movies with Netflix® 3. Now you can select the video content you wish to watch. To use the Netflix® service, connect this player to your network, and configure the network settings if they are not yet finished. In order to use this service, you must set up or use an existing account. Browsing photos with PicasaTM Launching Netflix® movie 1. Press the button on the remote control or select Portal in the setup screen to display the ePortal Home. 2.
Playable media This product can play: • Blu-ray Disc™-Video, BD-R/RE2.0,BDAV • DVD, DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (Dual Layer) • Video CD/SVCD • Audio CD, CD-R/CD-RW • AVCHD • USB flash drive Video Signal system: PAL/NTSC HDMI Output: 480i/576i, 480p/576p, 720p, 1080i, 1080p, 1080/24p Audio • Digital output (Coaxial): 0.5 Vp-p (75 Ω) • HDMI output USB 500mA • USB terminal: 5V • USB 1.1/USB 2.0 Full-speed/USB 2.
9 Troubleshooting If you experience any of the following difficulties while using this unit, check the list below before consulting your nearest TOSHIBA dealer. English Problem Tip No reaction to the remote control. Connect the product to the power outlet. Point the remote control at the product. Insert the battery correctly. Insert new battery in the remote control. No video signal on the display device. Turn on the TV. Set the TV to the correct external input. Select the correct video resolution.
Cannot find a JPEG file. Make sure that the selected group (folder) does not contain more than 9,999 files for DVD and 999 files for CD. Cannot find a MP3 file. English Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG. Make sure that the selected folder does not contain more than 9,999 files for DVD and 999 files for CD. Make sure that the file extension is .mp3 or .MP3. Cannot upgrade SW.
10 Glossary English Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high definition or wide TV is 16:9. The letterbox allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. AVCHD™ AVCHD™ is a new format for high definition video camcorders which can record and play highresolution HD images. AVI Audio Video Interleave, known by its acronym AVI, is a multimedia container format.
LAN (Local Area Network) A group of linked devices in a company, school or home. Indicates the boundaries of a particular network. Sampling Frequency The rate which sound is measured by a specified interval to turn into digital audio data. The numbers of sampling in one second defines as sampling frequency. The higher the rate, the better the sound quality. Title A collection of chapters on Blu-ray Disc™-video or DVD-video.
11 License Information on the Software Used in This Product English This document is statement purpose only. Not concerned with operation of this product. The software pre-installed in this product consists of multiple, independent software components. Each software component is copyrighted by a third party. This product uses software components that are distributed as freeware under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”).
GPLv2 mcr-tcpdump BSD dibbler GPLv2 sysvinit GPLv2 module-init-tools GPLv2 util-linux-ng GPLv2 procps (ps, top) LGPLv2 psmisc GPLv2 coreutils GPLv2 gawk GPLv2 grep GPLv2 findutils GPLv2 bash GPLv2 tar GPLv2 sed GPLv2 gzip GPLv2 inetutils GPLv2 ncurses ncurses.txt gdb (gdbserver) GPLv2 Das U-Boot GPLv2 International Components for Unicode ICULicense.txt zlib zlib.txt OpenSSL openssl.txt FreeType FreeType.txt Expat expat.txt libcurl libcurl.
English libusb LGPLv2.1 libusb-compat LGPLv2.1 Wireless Tools GPLv2 Unicode Bidirectional Algorithm Unicode_Bidirectional_Algorithm.txt HarfBuzz HarfBuzz.txt DirectFB LGPLv2.1 Fusion GPLv2 SaWMan LGPLv2.1 libpng libpng.txt Qt LGPLv2.1 libxml2 libxml.txt (MIT License) xmlrpc-c xmlrpc-c.txt tinyxml tinyxml.txt gSOAP gSOAP.txt (gSOAP Public License 1.3a) SQLite sqlite.txt (public domain) David M. Gay's dtoa and strtod DMG's dtoa and strtod.
xz cpio GPLv2 GNU GPLv2 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
recipients of the Program a copy of this License along with the Program. English You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 6.
English WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED
A “covered work” means either the unmodified Program or a work based on the Program. To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well.
3. Protecting Users’ Legal Rights From AntiCircumvention Law. English No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures.
e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work.
copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’s “contributor version”.
14. Revised Versions of this License. English The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of course, your program’s commands might be different; for a GUI interface, you would use an “about box”. You should also get your employer (if you work as a programmer) or school, if any, to sign a “copyright disclaimer” for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see .
b {font-family:”Verdana”;font-weight:bold; color:black;margin-top:-5px} H1 {font-family:”Verdana”;font-weight:normal; font-size:18pt;color:red } English H2 {font-family:”Verdana”;font-weight:normal; font-size:14pt;color:maroon} pre {font-family:”Lucida Console”;font-size:.9em} .
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. English The “Library”, below, refers to any such software library or work which has been distributed under these terms.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
English It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7.
NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:”This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)” English 4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org. 5.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.] zlib zlib.h -- interface of the ‘zlib’ general purpose compression library version 1.2.3, July 18th, 2005 Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler This software is provided ‘as-is’, without any express or implied warranty.
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below. 1. No Warranty English THE FREETYPE PROJECT IS PROVIDED `AS IS’ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2011, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
of CompuServe Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated.” c-ares English Copyright 1998 by the Massachusetts Institute of Technology. Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of M.I.T.
in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software. A “png_get_copyright” function is available, for convenient use in “about” boxes and the like: THIS SOFTWARE IS BEING PROVIDED “AS IS”, WITHOUT ANY EXPRESS OR IMPLIED WARRANTY.
questions, comments, complaints, performance data, etc to dl@cs.oswego.edu. the Software is furnished to do so, subject to the following conditions: EMX_sprintf_sscanf The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. English The emx libraries are not distributed under the GPL. Linking an application with the emx libraries does not cause the executable to be covered by the GNU General Public License.
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
English or CWI or Corporation for National Research Initiatives or CNRI not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. 1.4. “Electronic Distribution Mechanism” means a mechanism generally accepted in the software development community for the electronic transfer of data.
1.12. “You” (or “Your”) means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future version of this License issued under Section 6.1. For legal entities, “You” includes any entity which controls, is controlled by, or is under common control with You.
take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has been obtained. English (b) Contributor APIs. If Contributor’s Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file. (c) Representations.
7 DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS, AND ANY WARRANTY THAT MAY ARISE BY REASON OF TRADE USAGE, CUSTOM, OR COURSE OF DEALING.
English SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY’S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. 10 U.S. GOVERNMENT END USERS. 11 MISCELLANEOUS. 12 RESPONSIBILITY FOR CLAIMS.
Copyright (c) , All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
English whom the Data Files or Software are furnished to do so, provided that (a) the above copyright notice(s) and this permission notice appear with all copies of the Data Files or Software, (b) both the above copyright notice(s) and this permission notice appear in associated documentation, and (c) there is clear notice in each modified Data File or in the Software as well as in the documentation associated with the Data File(s) or Software that the data or software has been modified.
Before Lua 5.0, Lua used its own license, which was very close to the zlib license and others, but not quite the same. Check the source distribution for the exact license text for each version before Lua 5.0. Nevertheless, if you wish to use those old versions, you may hereby assume that they have all been re-licensed under the MIT license as described above. Copyright © 1994–2014 Lua.org, PUC-Rio.
